Search NASA⌕ Search

SEARCH · Search NASA

Results for “structured light”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Cubic Gallium Nitride on Micropatterned Si (001) for Longer Wavelength LEDs

GaInN/GaN heterostructures of cubic phase have the potential to overcome the limitations of wurtzite structures commonly used for light emitting and laser diodes. Wurtzite GaInN suffers from large internal polarization fields, which force design compromises ( 0001 ) towards ultra-narrow quantum wells and reduce recombination volume and efficiency. Cubic GaInN microstripes grown at Rensselaer Polytechnic Institute by metal organic vapor phase epitaxy on micropatterned Si , with {111} v-grooves oriented along Si ( 001 ) , offer a system free of internal polarization fields, wider quantum wells, and smaller <00$\bar1$> bandgap energy. We prepared 6 and 9 nm Ga x In 1-x N/GaN single quantum well structures with peak wavelength ranges from 520 to 570 nm with photons predominately polarized perpendicular to the grooves. We estimate a cubic InN composition range of 0 < x < 0.5 and an upper limit of the internal quantum efficiency of 50%. Stripe geometry and polarization may be suitable for mode confinement and reduced threshold stimulated emission.

36 MATERIALS SCIENCE↗

Thermalization and light cones in a model with weak integrability breaking

Here, we employ equation-of-motion techniques to study the nonequilibrium dynamics in a lattice model of weakly interacting spinless fermions. Our model provides a simple setting for analyzing the effects of weak integrability-breaking perturbations on the time evolution after a quantum quench. We establish the accuracy of the method by comparing results at short and intermediate times to time-dependent density matrix renormalization group computations. For sufficiently weak integrability-breaking interactions we always observe prethermalization plateaus , where local observables relax to nonthermal values at intermediate time scales. At later times a crossover towards thermal behavior sets in. We determine the associated time scale, which depends on the initial state, the band structure of the noninteracting theory, and the strength of the integrability-breaking perturbation. Our method allows us to analyze in some detail the spreading of correlations and in particular the structure of the associated light cones in our model. We find that the interior and exterior of the light cone are separated by an intermediate region, the temporal width of which appears to scale with a universal power law t 1/3 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Defect Complexes and Optical Properties of Doubly Doped Lithium Niobate Crystals

The effect of defect complexes related to the presence of protons on the optical properties of LiNbO{sub 3}:Y(0.24):Mg(0.63) and LiNbO{sub 3}:Gd(0.25):Mg(0.75) (wt %) crystals has been studied using IR absorption spectroscopy, photoinduced light scattering, and laser conoscopy. The results indicate that the absorption bands at frequencies of 3483 and 3486 cm{sup –1} correspond to vibrations of a V{sub Li}{sup -}–OH{sup −} defect complex. To a Mg {sub Li}{sup +} - Mg {sub Nb}{sup 3-}–OH{sup −}defect complex in the LiNbO{sub 3}:Gd(0.25):Mg(0.75) crystal correspond bands at frequencies of 3526 and 3535 cm{sup –1}. In the LiNbO{sub 3}:Y(0.24):Mg(0.63) crystal, we have detected an anomalous opening of the speckle structure of the photoinduced light scattering indicatrix.

36 MATERIALS SCIENCE↗

Structural basis for gene regulation by a B 12 -dependent photoreceptor

Photoreceptor proteins enable organisms to sense and respond to light. The newly discovered CarH-type photoreceptors use a vitamin B 12 derivative, adenosylcobalamin, as the light-sensing chromophore to mediate light-dependent gene regulation. Here in this paper, we present crystal structures of Thermus thermophilus CarH in all three relevant states: in the dark, both free and bound to operator DNA, and after light exposure. These structures provide visualizations of how adenosylcobalamin mediates CarH tetramer formation in the dark, how this tetramer binds to the promoter -35 element to repress transcription, and how light exposure leads to a large-scale conformational change that activates transcription. In addition to the remarkable functional repurposing of adenosylcobalamin from an enzyme cofactor to a light sensor, we find that nature also repurposed two independent protein modules in assembling CarH. Finally, these results expand the biological role of vitamin B 12 and provide fundamental insight into a new mode of light-dependent gene regulation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Method advancements for fuel assessments during seismic and LOCA events

The evaluation of fuel assembly structural responses of light-water reactors to seismic and LOCA excitations has received increased attention in the last five years. Real seismic events such as those that affected the Fukushima Daiichi and North Anna plants in 2011 have caused the industry to more closely examine our preparedness for seismic events. Furthermore, the review of design certifications for new plants has raised questions about the methods used to evaluate these events and is leading to revised guidance from regulators (e.g. US NRC Information Notice 2012-09). As a result, the industry is seeing fuel structural design margins based on current methods begin to erode for seismic and LOCA events. This paper will review points for consideration as the industry responds to these changes. To begin, it is worthwhile for the industry to understand the history and the critical thought behind the current methods such that improved criteria and methods can be formulated. This review identifies three known areas of weakness in the current framework for this methodology. First, a broader understanding of spacer grid behavior is needed. Spacer grid behavior in response to impact loads is of paramount importance, but the industry needs to re-frame our characterization of this behavior in order to focus on the actual critical safety function of this component. Secondly, despite guidance from the Standard Review Plan, the effects of irradiation, on spacer grid characteristics, in particular, must be considered. Thirdly, the area of fluid-structure-interaction may be the greatest frontier to conquer in this methodology and may provide our best possibility to recover eroded margins. However, fluid-structure-interactions must be cautiously evaluated and applied with conservatism. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Overview of composites for space shuttle structures.

The space shuttle, proposed as an earth to orbit reusable vehicle, presents a challenge to materials and design engineers to apply light-weight materials. To provide large payloads, the shuttle structure must be as light weight as possible, yet possess a high degree of structural integrity over a lifetime of multiple flights. This paper reviews the general maturity of advanced composites considered for various components of the shuttle and discusses the range of potential applications for such materials.

Cataldo, C. E.↗

Soft X-ray Emission Spectroscopy of Phosphorus Compounds for Energy Conversion and Storage

Phosphorus (P) is a ubiquitous component of materials for energy conversion and storage. Despite the effectiveness of soft X-ray emission spectroscopy (XES) to characterize these complex materials, XES studies of P-containing compounds are still largely missing. In this investigation, the electronic structure and XES signatures from the P L 2,3 -edge are probed for nine solid-state P-containing compounds characterized by various oxidation states and chemical environments: GaP (3−) , InP (3−) , red-P (0) , H 3 P (3+) O 3 , Na 2 H 2 P 2 (4+) O 6 , H 3 P (5+) O 4 , KH 2 P (5+) O 4 , Na 2 HP (5+) O 4 , and InP (5+) O 4 . The XES spectrum of each material exhibits distinct spectral fingerprints, which provide a robust basis for the speciation of complex P-containing samples. Density functional theory calculations shed light on the electronic structure of selected materials and particularly on the effect of phosphorus-oxygen hybridization. This study provides a comprehensive understanding of P L 2,3 XES spectral fingerprints across a wide range of oxidation states and chemical environments. These data sets and insights pave the way for dedicated future work, such as in situ and operando investigations of P-containing compounds in energy-related applications, where speciation of P compounds is needed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

GRB 221009A: Discovery of an Exceptionally Rare Nearby and Energetic Gamma-Ray Burst

We report the discovery of the unusually bright long-duration gamma-ray burst (GRB), GRB 221009A, as observed by the Neil Gehrels Swift Observatory (Swift), Monitor of All-sky X-ray Image, and Neutron Star Interior Composition Explorer Mission. This energetic GRB was located relatively nearby (z = 0.151), allowing for sustained observations of the afterglow. The large X-ray luminosity and low Galactic latitude (b = 4$^°_.$3) make GRB 221009A a powerful probe of dust in the Milky Way. Using echo tomography, we map the line-of-sight dust distribution and find evidence for significant column densities at large distances (≳10 kpc). We present analysis of the light curves and spectra at X-ray and UV–optical wavelengths, and find that the X-ray afterglow of GRB 221009A is more than an order of magnitude brighter at T 0 + 4.5 ks than that from any previous GRB observed by Swift. In its rest frame, GRB 221009A is at the high end of the afterglow luminosity distribution, but not uniquely so. In a simulation of randomly generated bursts, only 1 in 10 4 long GRBs were as energetic as GRB 221009A; such a large E γ,iso implies a narrow jet structure, but the afterglow light curve is inconsistent with simple top-hat jet models. Using the sample of Swift GRBs with redshifts, we estimate that GRBs as energetic and nearby as GRB 221009A occur at a rate of ≲1 per 1000 yr—making this a truly remarkable opportunity unlikely to be repeated in our lifetime.

79 ASTRONOMY AND ASTROPHYSICS↗

GaInN light-emitting diodes using separate epitaxial growth for the p-type region to attain polarization-inverted electron-blocking layer, reduced electron leakage, and improved hole injection

A GaInN light-emitting diode (LED) structure is analyzed that employs a separate epitaxial growth for the p-type region, i.e., the AlGaN electron-blocking layer (EBL) and p-type GaN cladding layer, followed by wafer or chip bonding. Such LED structure has a polarization-inverted EBL and allows for uncompromised epitaxial-growth optimization of the p-type region, i.e., without the need to consider degradation of the quantum-well active region during p-type region growth. Simulations show that such an LED structure reduces electron leakage, reduces the efficiency droop, improves hole injection, and has the potential to extend high efficiencies into the green spectral region.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Combined electrical and resonant optical excitation characterization of multi-quantum well InGaN-based light-emitting diodes

We present a comprehensive study of the emission spectra and electrical characteristics of InGaN/GaN multi-quantum well light-emitting diode (LED) structures under resonant optical pumping and varying electrical bias. A 5 quantum well LED with a thin well (1.5 nm) and a relatively thick barrier (6.6 nm) shows strong bias-dependent properties in the emission spectra, poor photovoltaic carrier escape under forward bias and an increase in effective resistance when compared with a 10 quantum well LED with a thin (4 nm) barrier. These properties are due to a strong piezoelectric field in the well and associated reduced field in the thicker barrier. We compare the voltage ideality factors for the LEDs under electrical injection, light emission with current, photovoltaic mode (PV) and photoluminescence (PL) emission. The PV and PL methods provide similar values for the ideality which are lower than for the resistance-limited electrical method. Under optical pumping the presence of an n-type InGaN underlayer in a commercial LED sample is shown to act as a second photovoltaic source reducing the photovoltage and the extracted ideality factor to less than 1. The use of photovoltaic measurements together with bias-dependent spectrally resolved luminescence is a powerful method to provide valuable insights into the dynamics of GaN LEDs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Leaf-templated synthesis of hierarchical AgCl-Ag-ZnO composites with enhanced visible-light photocatalytic activity

Highlights: • Leaf-templated AgCl-Ag-ZnO composites were obtained. • The catalysts exhibit excellent visible-light photoctalytic activity. • Electrons and holes of catalyst are efficiently separated. - Abstract: In this paper, poplar leaf is used as a template to synthesize hierarchical AgCl-Ag-ZnO composites via a calcination method. Zn(NO{sub 3}){sub 2} and AgNO{sub 3} are selected as precursors. During the calcination of the templates, Zn{sup 2+} ions react with oxygen to produce ZnO nanoparticles (NPs), Cl{sup −} ions in leaf cells combine with the external Ag{sup +} ions to form AgCl, and Ag{sup +} ions are reduced by reducing agents in leaf to Ag NPs. The morphology, structure and visible-light response of the as-prepared hierarchical AgCl-Ag-ZnO composites are determined. The composites exhibit a strong photocatalytic activity toward the degradation of Rhodamine B (RhB) under visible-light irradiation. The AgCl-Ag-ZnO composites display an enhanced photocatalytic activity, compared with the leaf-templated AgCl-Ag and ZnO. A photocatalytic mechanism is proposed, based on the efficient separation of photoexcited electron-hole pairs due to the surface plasmon resonance (SPR) effect of metal Ag.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Eastern Kodak Company

Lighting consumes more than 20% of electricity generated in the United States. Solid state lighting relies upon either inorganic or organic light-emitting diodes (OLEDs). OLED devices because of their thinness, fast response, excellent color, and efficiency could become the technology of choice for future lighting applications, provided progress is made to increase power efficiency and device lifetime and to develop cost-effective manufacturing processes. As a first step in this process, Eastman Kodak Company has demonstrated an OLED device architecture having an efficacy over 50 lm/W that exceeds the specifications of DOE Energy Star Program Requirements for Solid State Lighting. The project included work designed to optimize an OLED device, based on a stacked-OLED structure, with performance parameters of: low voltage; improved light extraction efficiency; improved internal quantum efficiency; and acceptable lifetime. The stated goal for the end of the project was delivery of an OLED device architecture, suitable for development into successful commercial products, having over 50 lum/W power efficiency and 10,000 hours lifetime at 1000 cd/m{sup 2}. During the project, Kodak developed and tested a tandem hybrid IES device made with a fluorescent blue emitter, a phosphorescent yellow emitter, and a phosphorescent red emitter in a stacked structure. The challenge was to find low voltage materials that do not absorb excessive amounts of emitted light when the extraction enhancement structure is applied. Because an extraction enhancement structure forces the emitted light to travel several times through the OLED layers before it is emitted, it exacerbates the absorption loss. A variety of ETL and HTL materials was investigated for application in the low voltage SSL device structure. Several of the materials were found to successfully yield low operating device voltages without incurring excessive absorption loss when the extraction enhancement structure was applied. An internal extraction layer comprises two essential components: a light extraction element (LEE) that does the actual extraction of emitted light and a light coupling layer (LCL) that allows the emitted light to interact with the extraction element. Modeling results show that the optical index of the LCL needs to be high, preferably higher than that of the organic layers with an n value of {approx}1.8. In addition, since the OLED structure needs to be built on top of it the LCL needs to be physically and chemically benign. As the project concluded, our focus was on the tandem hybrid device, which proved to be the more efficient architecture. Cost-efficient device fabrication will provide the next challenges with this device architecture in order to allow this architecture to be commercialized.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Perfect transmission and highly asymmetric light localization in photonic multilayers

General principles for the existence of perfect transmission resonances in photonic multilayer structures are formulated in terms of light interference described by recurrent Airy formulas. Mirror symmetry in the multilayer is shown to be a sufficient but not necessary condition for perfect transmission resonances. Asymmetric structures displaying perfect transmission in accordance with the proposed principles are demonstrated. A hybrid Fabry-Perot photonic-crystal structure of the type (BA){sup k}(AB){sup k}(AABB){sup m} is proposed, combining perfect transmission and highly asymmetric electric field localization. Strength and asymmetry of localization can be controlled independently to be of use in tailoring nonreciprocal behavior of nonlinear all-optical diodes.

36 MATERIALS SCIENCE↗

Electromagnetic and thermal properties of three-dimensional printed multilayered nano-carbon/poly(lactic) acid structures

A new type of light-weight material produced by 3D printing consisting of nano-carbon doped polymer layer followed by a dielectric polymer layer is proposed. We performed temperature dependent characterization and measured the electromagnetic (EM) response of the samples in the GHz and THz range. The temperature dependent structural characteristics, crystallization, and melting were observed to be strongly affected by the presence and the number of nano-carbon doped layers in the sandwich structure. The electromagnetic measurements show a great potential of such a type of periodic material for electromagnetic compatibility applications in microwave frequency range. Sandwich structures containing only two nano-carbon layers already become not transparent to the microwaves, giving an electromagnetic interference shielding efficiency at the level of 8–15 dB. A sandwich consisting of one nano-carbon doped and one polymer layer is opaque for THz radiation, because of 80% of absorption. These studies serve as a basis for design and realization of specific optimal geometries of meta-surface type with the 3D printing technique, in order to reach a high level of electromagnetic interference shielding performance for real world EM cloaking and EM ecology applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Crucial Points within the Pore as Determinants of K[superscript +] Channel Conductance and Gating

While selective for K{sup +}, K{sup +} channels vary significantly among their rate of ion permeation. Here, we probe the effect of steric hindrance and electrostatics within the ion conduction pathway on K{sup +} permeation in the MthK K{sup +} channel using structure-based mutagenesis combined with single-channel electrophysiology and X-ray crystallography. We demonstrate that changes in side-chain size and polarity at Ala88, which forms the constriction point of the open MthK pore, have profound effects on single-channel conductance as well as open probability. We also reveal that the negatively charged Glu92s at the intracellular entrance of the open pore form an electrostatic trap, which stabilizes a hydrated K{sup +} and facilitates ion permeation. This electrostatic attraction is also responsible for intracellular divalent blockage, which renders the channel inward rectified in the presence of Ca{sup 2+}. In light of the high structural conservation of the selectivity filter, the size and chemical environment differences within the portion of the ion conduction pathway other than the filter are likely the determinants for the conductance variations among K{sup +} channels.

Shi, Ning↗

Full Field Photoelastic Stress Analysis

A structural specimen coated with or constructed of photoelastic material, when illuminated with circularly polarized light will, when stressed: reflect or transmit elliptically polarized light, the direction of the axes of the ellipse and variation of the elliptically light from illuminating circular light will correspond to and indicate the direction and magnitude of the shear stresses for each illuminated point on the specimen. The principles of this invention allow for several embodiments of stress analyzing apparatus, ranging from those involving multiple rotating optical elements, to those which require no moving parts at all. A simple polariscope may be constructed having two polarizing filters with a single one-quarter waveplate placed between the polarizing filters. Light is projected through the first polarizing filter and the one-quarter waveplate and is reflected from a sub-fringe birefringent coating on a structure under load. Reflected light from the structure is analyzed with a polarizing filter. The two polarizing filters and the one-quarter waveplate may be rotated together or the analyzer alone may be rotated. Computer analysis of the variation in light intensity yields shear stress magnitude and direction.

Lesniak, Jon R.↗

Size-dependent radiation damage mechanisms in nanowires and nanoporous structures

Nanostructures with a high density of interfaces, such as in nanoporous materials and nanowires, resist radiation damage by promoting the annihilation and migration of defects. This study details the size effect and origins of the radiation damage mechanisms in nanowires and nanoporous structures in model face-centered (gold) and body-centered (niobium) cubic nanostructures using accelerated multi-cascade atomistic simulations and in-situ ion irradiation experiments. Our results reveal three different size-dependent mechanisms of damage accumulation in irradiated nanowires and nanoporous structures: sputtering for very small nanowires and ligaments, the formation and accumulation of point defects and dislocation loops in larger nanowires, and a face-centered-cubic to hexagonal-close-packed phase transformation for a narrow range of wire diameters in the case of gold nanowires. Smaller nanowires and ligaments have a net effect of lowering the radiation damage as compared to larger wires that can be traced back to the fact that smaller nanowires transition from a rapid accumulation of defects to a saturation and annihilation mechanism at a lower dose than larger nanowires. These irradiation damage mechanisms are accompanied with radiation-induced surface roughening resulting from defect-surface interactions. Comparisons between nanowires and nanoporous structures show that the various mechanisms seen in nanowires provide adequate bounds for the defect accumulation mechanisms in nanoporous structures with the difference attributed to the role of nodes connecting ligaments in nanoporous structures. Altogether, our results shed light on the compounded, size-dependent mechanisms leading to the radiation resistance of nanowires and nanoporous structures.

36 MATERIALS SCIENCE↗