Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Mechanosynthesis, deposition and characterization of CZTS and CZTSe materials for solar cell applications

Mechanosynthesis of nanocrystalline powders of CZTS and CZTSe by ball milling technique and the physical properties of thermally evaporated CZTS and CZTSe thin films as a function of substrate temperature are investigated. Nanocrystalline Cu–Zn–Tin–Sulphide (CZTS) and Cu–Zn–Tin–Selenide (CZTSe) powders synthesized by ball milling at different milling time using the source materials of Cu, Zn, Sn, S (or) Se in the ratio 2:1:1:4 are investigated. The above synthesized powder was thermally evaporated on glass substrate kept at room temperature and 673 K under a vacuum of 10{sup −6} mbar to prepare quaternary compound semiconducting thin films in a single step process. The synthesized powder and deposited CZTS and CZTSe thin films belong to tetragonal crystal system. Raman spectra reveal that the synthesized nanocrystals are pure without any secondary phases. A gradual reduction in optical bandgap of films was observed with increasing substrate temperature due to increased crystallinity of the films. The changes in surface morphology of the films with respect to substrate temperature were studied by scanning electron microscopy and atomic force microscopy. Electrical studies indicate that the deposited films have p-type conductivity. - Highlights: • Nanocrystalline powders of CZTS and CZTSe are synthesized by ball milling technique. • The ball milled powder was thermally evaporated on glass at room temperature and 673 K. • Raman spectroscopy reveals that the synthesized nanocrystals are pure without any secondary phases. • SEM and AFM micrographs illustrate the granular type of growth and the roughness and particle sizes obtained at the substrate temperature of 673 K are higher than those obtained in the room temperature. • Hall coefficient obtained for the film confirms the p-type conductivity. • A gradual reduction in optical bandgap was observed with increasing substrate temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic, optical and photocatalytic behavior of Mn, N doped and co-doped TiO{sub 2}: Experiment and simulation

The crystal phase structure, surface morphology, chemical states and optical properties of Mn, N mono-doped and co-doped TiO{sub 2} nanoparticles were investigated by X-ray powder diffractometry, Raman spectra, scanning electron microscopy, X-ray photoelectron spectroscopy and UV–vis diffuse reflectance spectroscopy. Meanwhile, geometry structures, formation energies, electronic and optical properties of all systems have been also analyzed by density functional theory. The results showed that the band gap values and the carrier mobility in the valence band, conduction band and impurity levels have a synergetic influence on the visible-light absorption and photocatalytic activity of the doped TiO{sub 2}. The number and the carrier mobility of impurity level jointly influence the photocatalytic activity of catalyst under visible-light. Especially, the photocatalytic activity of Mn-2N co-doped TiO{sub 2} beyond three-fold than that of pure TiO{sub 2} under visible-light. - Graphical abstract: The ILs formed by N-2p orbital in N single doped specimen lie above the VB, while the ILs formed by Mn-3d orbital in Mn single doped specimen appear below the CB. However, a large amount of ILs formed by N-2p orbital and Mn-3d orbital in N and Mn codoped specimens. The band gap values and the carrier mobility in the valence band, conduction band and impurity levels have a synergetic influence on the visible-light absorption and photocatalytic activity of the doped TiO{sub 2}. The number and the carrier mobility of impurity level jointly influence the photocatalytic activity of catalyst under visible-light.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of drying temperatures on structural performance and photocatalytic activity of BiOCl synthesized by a soft chemical method

A group of BiOCl photocatalysts with different drying temperatures were prepared by a soft chemical method. The effects of drying temperatures on the crystalline phase, morphology, surface area and optical property of as-prepared samples were investigated in detail by XRD, SEM, N{sub 2} absorption–desorption and DRS. Moreover, their photocatalytic activities on the degradation of rhodamine B were evaluated under visible light irradiation. It was found that the sample dried at 120 °C had the best photocatalytic activity, which was mainly attributed to the highest exposing proportion of {001} facets correspond to BiOCl, largest BET and minimum bandgap. The degradation mechanism was explored that superoxide radicals were mainly contributed to the degradation of chromophore, however, holes and hydroxyl were mainly contributed to the photo degradation. Moreover, holes and hydroxyl dominated the degradation of RhB. - Graphical abstract: Holes, hydroxyl and superoxide radicals can attribute to the degradation process but take different degradation pathways. Superoxide radicals mainly contribute to the degradation of chromophore, however, holes and hydroxyl mainly contribute to the photo degradation. Display Omitted - Highlights: • BiOCl nanosheets were prepared by a soft chemical method. • Effect of drying temperatures on as-prepared BiOCl samples was studied. • The highest removal efficiency of RhB was obtained over the sample dried at 120 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-performance magnetic carbon materials in dye removal from aqueous solutions

To obtain a novel adsorbent with excellent adsorption capacity and convenient magnetic separation property, magnetic activated semi-coke was prepared by KOH activation method and further modified by FeCl{sub 3}. The surface morphology, physical structure, chemical properties and textural characteristics of unmodified semi-coke, KOH-modified semi-coke and magnetic activated semi-coke were characterized by scanning electron microscopy, X-ray powder diffraction, N{sub 2} adsorption-desorption measurement, and electronic differential system. The adsorption characteristics of the magnetic activated semi-coke were explored for the removal of methyl orang (MO), methylene blue (MB), congo red (CR), acid fuchsin (AF), and rhodamine B (RB) from aqueous solution. The effects of adsorption parameters, including adsorbent dosage, pH and contact time, were investigated by comparing the adsorption properties of the magnetic activated semi-coke to RB. The result showed that the magnetic activated semi-coke displayed excellent dispersion, convenient separation and high adsorption capacity. The adsorption experiment data indicated that the pseudosecond order model and the Langmuir model could well explain the adsorption processes of RB on the magnetic activated semi-coke, and the maximum adsorption capacity (q{sub m}) was 526.32 mg/g. The values of thermodynamic parameters (ΔG°, ΔH° and ΔS°) indicated that the adsorption process depended on the temperature of the aqueous phase, and it was spontaneous and exothermic in nature. As the addition of the magnetic activated semi-coke, the color of the solution significantly faded. Subsequently, fast aggregation of the magnetic activated semi-coke from their homogeneous dispersion in the presence of an external magnetic field could be happened. So, the magnetic activated semi-coke displayed excellent dispersion, convenient separation and high adsorption capacity. - Graphical abstract: As the addition of the magnetic activated semi-coke, the color of the solution significantly faded. Subsequently, fast aggregation of the magnetic activated semi-coke from their homogeneous dispersion in the presence of an external magnetic field could be happened. So, the magnetic activated semi-coke displayed excellent dispersion, convenient separation and high adsorption capacity. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanism of γ-irradiation induced phase transformations in nanocrystalline Mn{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} ceramics

The structural, infrared absorption and magnetic property transformations in nanocrystalline Mn{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} samples irradiated with different doses (0, 15, 25 and 50 kGy) of γ-irradiation were investigated in this work and a mechanism of phase transformation/decomposition is provided based on the metastable nature of the Mn-atoms in the spinel lattice. The nano-powder sample was prepared by solution combustion route and the pellets of the sample were exposed to γ-radiation. Up to a dose of 25 kGy of γ-radiation, the sample retained the single phase cubic spinel (Fd-3m) structure, but the disorder in the sample increased. On irradiating the sample with 50 kGy γ-radiation, the spinel phase decomposed into new stable phases such as α-Fe{sub 2}O{sub 3} and ZnFe{sub 2}O{sub 4} phases along with amorphous MnO phase, leading to a change in the surface morphology of the sample. Along with the structural transformations the magnetic properties deteriorated due to breakage of the ferrimagnetic order with higher doses of γ-irradiation. Our results are important for the understanding of the stability, durability and performance of the Mn-Zn ferrite based devices used in space applications. - Graphical abstract: The nanocrystalline Mn{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} ceramic sample transforms to crystalline α-Fe{sub 2}O{sub 3} and ZnFe{sub 2}O{sub 4} phases (and amorphous MnO phase) at a γ-irradiation dose of 50 kGy, as MnO goes out of the spinel lattice. The high energy γ-irradiation causes structural damage to the nanomaterials leading to change in morphology of the sample as seen in the SEM images. - Highlights: • Mn atoms are more unstable in the Mn-Zn ferrite spinel lattice than Zn-atoms. • Displacement of Mn atoms by γ-radiation from the lattice renders phase transformation. • In Mn{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}, Mn-ferrite cell transforms to crystalline α-Fe{sub 2}O{sub 3} and amorphous MnO. • The stable ZnFe{sub 2}O{sub 4} phase retains its structure even after 50 KGy γ-irradiation. • The γ-irradiation degrades the magnetic properties of Mn{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} ceramics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A single-composition CaSi{sub 2}O{sub 2}N{sub 2}:RE (RE=Ce{sup 3+}/Tb{sup 3+}, Eu{sup 2+}, Mn{sup 2+}) phosphor nanofiber mat: Energy transfer, luminescence and tunable color properties

CaSi{sub 2}O{sub 2}N{sub 2}:RE (RE = Ce{sup 3+}/Tb{sup 3+}, Eu{sup 2+}, Mn{sup 2+}) phosphor nanofiber mat has been prepared via the electrospinning process and further annealing treatment. The diameter of nanofiber precursors are generally in a range of 400–600 nm, which exhibits smooth and uniform surface morphology. After removing the polymer template by high temperature treatment, the fabricated mats have been transformed into a phosphor film and maintain uniform nanofiber network microstructures. Photoluminescence (PL) properties of CaSi{sub 2}O{sub 2}N{sub 2} phosphor nanofiber mat have been activated by Ce{sup 3+}/Tb{sup 3+}, Eu{sup 2+} and Mn{sup 2+}. The emission color of CaSi{sub 2}O{sub 2}N{sub 2}:Ce{sup 3+}/Tb{sup 3+}, Eu{sup 2+}, Mn{sup 2+} phosphor mats can be adjusted by modifying the concentration of doped Tb{sup 3+}/Mn{sup 2+}/Eu{sup 2+} and the resultant energy transfer process. Owing to the energy transfer of Ce{sup 3+}-Tb{sup 3+}, the emitting color of the phosphor mat can be changed from blue to green. Meanwhile, we still found that the switching of emitting colors from blue to red and blue to yellow can be achieved via the energy transfer of Ce{sup 3+}-Mn{sup 2+} and Ce{sup 3+}-Eu{sup 2+}, respectively. We demonstrated a white light emission phosphor nanofiber mat by using CaSi{sub 2}O{sub 2}N{sub 2} system, which exhibited promising applications for near-UV WLEDs. - Graphical abstract: CIE chromaticity coordinates of CaSi{sub 2}O{sub 2}N{sub 2}:Ce{sup 3+}/Tb{sup 3+}, Eu{sup 2+}, Mn{sup 2+} samples. The lighting optical images with a drive current of 100 mA: three LEDs with nanofiber mats of CaSi{sub 2}O{sub 2}N{sub 2}: 0.02Ce{sup 3+}, 0.03Tb{sup 3+}(b), CaSi{sub 2}O{sub 2}N{sub 2}: 0.02Ce{sup 3+}, 0.01Eu{sup 2+}(c) and CaSi{sub 2}O{sub 2}N{sub 2}: 0.02Ce{sup 3+}, 0.12Mn{sup 2+}(d). Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modulating upconversion luminescence through fluorescent dyes

In our work, we report an effective method to tune the upconversion emission of NaGdF{sub 4}:Yb{sup 3+},Er{sup 3+}@NaYF{sub 4} core/shell nanoparticles. The shell thickness-dependent upconversion luminescence of NaGdF{sub 4}:Yb{sup 3+},Er{sup 3+}@NaYF{sub 4} core/shell and the dye Rhodamine-B(RhB) composite were discussed in detail. It is found that the fluorescent dye RhB can remarkably improve the violet emission of the upconversion nanoparticles (UCNPs) and simultaneously generating the 605 nm yellow emission through energy transfer. Importantly, it is revealed that the effective energy transfer distance between upconversion nanoparticles and RhB is shorter than 18 nm in the media of NaYF{sub 4}. These results open a novel way for determining the energy transfer distance between the upconversion nanoparticles and the dyes and simultaneously tuning the emission brightness and the spectrum covering range of the upconversion nanoparticles for meeting the requirement in the application fields of light source, colorful display, biological imaging, and fluorescent probes. - Graphical abstract: TEM images of core/shell upconversion nanoparticles and the illustration of Energy transfer distance UCNPs and Rhodamine-B molecular. Display Omitted - Highlights: • The upconversion nanoparticles with controlled surface morphology and shell thickness were prepared by thermal decomposition method. The emission brightness and the spectrum covering range of the upconversion nanoparticles can be tuned. • The fluorescent dye RhB can remarkably improve the violet emission of the upconversion nanoparticles and simultaneously generating the 605 nm yellow emission through energy transfer. • It is the first reported that the effective energy transfer distance between upconversion nanoparticles and RhB is shorter than 18 nm in the media of NaYF{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural analysis of Sm{sup 3+} doped nanocrystalline Mg-Cd ferrites prepared by oxalate co-precipitation method

The structural properties of polycrystalline Sm{sup 3+} doped Mg{sub 1} {sub -} {sub x}Cd{sub x} Fe{sub 2}O{sub 4} (x = 0.0, 0.2, 0.4, 0.6, 0.8, 1.0) have been investigated by oxalate co-precipitation method from high purity sulphates. The samples were sintered at 1050 deg. C for a duration of 5 h. The X-ray diffraction measurements confirmed the formation of a cubic spinel structure. The different parameters like lattice constant, X-ray density, physical density, porosity, crystallite size, site radii and bond length on tetrahedral and octahedral sites have been calculated. The lattice constant increases with an increase in Cd{sup 2+} content and shows non linear behavior. The crystallite size was calculated using Scherrer formula and varies from 28.69 to 32.05 nm. Physical densities were obtained by Archimedes principle. The surface morphology studied by scanning electron microscope shows that the grain size of the samples increases with an increase in Cd{sup 2+} content. The IR spectra show two strong absorption bands around 5.87 x 10{sup 4} m{sup -1} and 4.27 x 10{sup 4} m{sup -1} on the tetrahedral and octahedral sites respectively. IR spectra also show that Sm{sup 3+} occupies the octahedral B-site.

36 MATERIALS SCIENCE↗

Optical investigations on indium oxide nano-particles prepared through precipitation method

Visible light emitting indium oxide nanoparticles were synthesized by precipitation method. Sodium hydroxide dissolved in ethanol was used as a precipitating agent to obtain indium hydroxide precipitates. Precipitates, thus formed were calcined at 600 deg. C for 1 h to obtain indium oxide nanoparticles. The structure of the particles as determined from the X-Ray diffraction pattern was found to be body centered cubic. The phase transformation of the prepared nanoparticles was analyzed using thermogravimetry. Surface morphology of the prepared nanoparticles was analyzed using high resolution-scanning electron microscopy and transmission electron microscopy. The results of the analysis show cube-like aggregates of size around 50 nm. It was found that the nanoparticles have a strong emission at 427 nm and a weak emission at 530 nm. These emissions were due to the presence of singly ionized oxygen vacancies and the nature of the defect was confirmed through Electron paramagnetic resonance analysis.

36 MATERIALS SCIENCE↗

Carriers-mediated ferromagnetic enhancement in Al-doped ZnMnO dilute magnetic semiconductors

Nano-crystalline Zn{sub 0.95-x}Mn{sub 0.05}Al{sub x}O (x = 0, 0.05, 0.10) dilute magnetic semiconductors (DMS) were synthesized by sol-gel derived auto-combustion. X-ray diffraction (XRD) analysis shows that the samples have pure wurtzite structure typical of ZnO without the formation of secondary phases or impurity. Crystallite sizes were approximated by Scherrer formula while surface morphology and grain sizes were measured by field emission scanning electron microscopy. Incorporation of Mn and Al into the ZnO structure was confirmed by energy-dispersive X-ray analysis. Temperature dependent electrical resistivity measurements showed a decreasing trend with the doping of Al in ZnMnO, which is attributable to the enhancement of free carriers. Vibrating sample magnetometer studies confirmed the presence of ferromagnetic behavior at room temperature. The results indicate that Al doping results in significant variation in the concentration of free carriers and correspondingly the carrier-mediated magnetization and room temperature ferromagnetic behavior, showing promise for practical applications. We attribute the enhanced saturation magnetization and electrical conductivity to the exchange interaction mediated by free electrons.

36 MATERIALS SCIENCE↗

Influence of current density on microstructure of pulse electrodeposited tin coatings

Pulse electrodeposited tin coatings on copper substrate have been synthesized from an aqueous solution containing sodium stannate (Na{sub 2}SnO{sub 3}.3H{sub 2}O) and sodium hydroxide (NaOH). The effect of current density on surface morphology of the deposits has been investigated. As deposited coatings are characterized by X-ray diffraction, scanning electron microscopy, electron backscatter diffraction, and line profile analysis. The X-ray diffraction analysis shows that the deposits consist of tetragonal ({beta}-Sn) structure with microcrystalline grains. The deposits plated at lower current density exhibit (110) texture which decreases with increasing current densities. The effects of current density on Cu-Sn diffusion and whisker growth of the electrodeposited tin coatings are also reported here. - Highlights: Black-Right-Pointing-Pointer Pulse electrodeposition of Sn from aqueous alkaline solution without adding any organic additive. Black-Right-Pointing-Pointer Effect of current density on morphology and whisker growth in tin coatings aged for 1 year. Black-Right-Pointing-Pointer Solution bath is stable and can be operated over a wide range of current density.

36 MATERIALS SCIENCE↗

Wear resistance and microstructural properties of Ni–Al/h-BN/WC–Co coatings deposited using plasma spraying

Hexagonal boron nitride (h-BN) and tungsten carbide cobalt (WC–Co) were added to nickel aluminum alloy (Ni–Al) and deposited as plasma sprayed coatings to improve their tribological properties. The microstructure of the coatings was analyzed using a scanning electron microscope (SEM). Following wear test, the worn surface morphologies of the coatings were analyzed using a SEM to identify their fracture modes. The results of this study demonstrate that the addition of h-BN and WC–Co improved the properties of the coatings. Ni–Al/h-BN/WC–Co coatings with high hardness and favorable lubrication properties were deposited. - Highlights: • We mixed Ni–Al, h-BN and WC–Co powders and deposited them as composite coatings. • Adding WC–Co was found to increase the hardness and reduce the wear volume loss. • Adding h-BN was found to decrease the hardness and reduce the friction coefficient. • This composite coating was shown to have improved wear properties at 850 °C.

36 MATERIALS SCIENCE↗

Effect of post-deposition annealing on phase formation and properties of RF magnetron sputtered PLZT thin films

In this work, we report the preparation of lanthanum-modified lead zirconate titanate (PLZT) thin films by RF magnetron sputtering on platinized silicon (Pt/Ti/SiO{sub 2}/Si) substrate. Sputtering was done in pure argon at 100 W RF power without external substrate heating. X-ray diffraction studies were performed on the films to study the effect of post-deposition furnace annealing temperature and time on the perovskite phase formation of PLZT. Annealing at 650 deg. C for 2 h was found to be optimum for the preparation of PLZT films in pure perovskite phase. The effect of different annealing conditions on surface morphology of the films was examined using AFM. The dielectric, ferroelectric and electrical properties of these films were also investigated in detail as a function of different annealing conditions. The pure perovskite film exhibits better properties than the other films which have some fraction of unwanted pyrochlore phase. The remanent polarization for pure perovskite film was found to be {approx}29 {mu}C/cm{sup 2} which is almost double compared to the films having mixed phases. The dc resistivity of the pure perovskite film was found to be 7.7 x 10{sup 10} {omega} cm at the electric field of {approx}80 kV/cm.

36 MATERIALS SCIENCE↗

Optical and structural characteristics of ZnO thin films grown by rf magnetron sputtering

Nanostructured ZnO thin films on Pyrex glass substrates were deposited by rf magnetron sputtering at different substrate temperatures. Structural features and surface morphology were studied by X-ray diffraction and atomic force microscopy analyses. Films were found to be transparent in the visible range above 400 nm, having transparency above 90%. Sharp ultraviolet absorption edges around 370 nm were used to extract the optical band gap for samples of different particle sizes. Optical band gap energy for the films varied from 3.24 to 3.32 eV and the electronic transition was of the direct in nature. A correlation of the band gap of nanocrystalline ZnO films with particle size and strain was discussed. Photoluminescence emission in UV range, which is due to near band edge emission is more intense in comparison with the green band emission (due to defect state) was observed in all samples, indicating a good optical quality of the deposited films.

36 MATERIALS SCIENCE↗

Phthalic acid assisted nano-sized spinel LiMn{sub 2}O{sub 4} and LiCr{sub x}Mn{sub 2-x}O{sub 4} (x = 0.00-0.40) via sol-gel synthesis and its electrochemical behaviour for use in Li-ion-batteries

Nano-sized particles of spinel LiMn{sub 2}O{sub 4} and LiCr{sub x}Mn{sub 2-x}O{sub 4} (x = Cr; 0.00-0.40) have been synthesized using phthalic acid as chelating agent for the first time by sol-gel method. When compared to solid-state synthesis method, the sol-gel route reduces heating time of synthesize and to obtain particles of uniform surface morphology. The synthesized samples were characterized through thermo-gravimetric analysis (TGA), X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). SEM images of the parent compounds show nanospherical grains of LiMn{sub 2}O{sub 4} when compared to chromium-doped ones. XRD patterns of LiMn{sub 2}O{sub 4} ascertain amorphous nature and for high calcined LiCr{sub x}Mn{sub 2-x}O{sub 4} single phase highly crystalline patterns were obtained. TEM images of the parent and chromium-doped spinel particles depict individual grain morphology with well-separated grain boundaries. LiCr{sub 0.10}Mn{sub 1.90}O{sub 4} excels in discharge and cycling behaviour and offer higher columbic efficiency, when compared to un-doped LiMn{sub 2}O{sub 4}. Cyclic voltammograms of LiMn{sub 2}O{sub 4} and LiCr{sub x}Mn{sub 2-x}O{sub 4} exhibit oxidation and reduction peaks corresponding to Mn{sup 3+}/Mn{sup 4+} and Cr{sup 3+}/Cr{sup 4+}.

36 MATERIALS SCIENCE↗

Manufacture, microstructure and mechanical properties of Mo-W-N nanostructured hard films

Mo{sub 1-x}W{sub x}N{sub y} (x = 0-0.67) hard films were fabricated on wafers of silicon and high speed steel by dc magnetron sputtering technique. The effect of tungsten concentration on the phase composition, microstructure, surface morphology, hardness, adhesion, and corrosion resistance of the films was studied by X-ray diffraction, scanning electron microscopy, nano-indentation, and scratch test. It was found that if the W concentration (x) in the film is in the range of 0-0.52, the films exhibit fcc (Mo,W)N{sub y} single phase where larger W atoms substituted Mo atoms in fcc MoN{sub y}. At higher x values (x > 0.52) the films exhibit a two-phase structure consisting of fcc (Mo,W)N{sub y} and pure bcc tungsten phase. The hardness of the Mo{sub 1-x}W{sub x}N{sub y} films increases at first with increasing x, and then decreases after passing a maximum. The maximum hardness of 47 GPa is obtained at x = 0.37 corresponding to an adhesion strength of 60 N. The Mo-W-N coated high speed steel has a lower corrosion current density and higher corrosion potential than the bare high speed steel substrates.

36 MATERIALS SCIENCE↗

Structural and electrical characteristics of dysprosium-doped barium stannate titanate ceramics

Effects of dysprosium (Dy) amphoteric doping on the structural, dielectric and electric properties of barium stannate titanate (BTS) ceramics have been studied. X-ray diffraction analyses reveal that all Dy-doped BTS ceramics exhibit cubic perovskite structure until to 1 mol%. Dy doping at the A site shows lower solubility than that at the B site. SEM surface morphologies display that the Dy B site doping is beneficial for the compact and homogeneous grain distribution. The dielectric constant and loss tangent are reduced with increase of the doping levels. Impedance spectroscopy investigation demonstrates that all samples are insulating at room temperature. Doping alters the full resistive regions of pure BTS ceramics to Doped BTS with insulating grain boundaries and semiconducting bulk regions, but the doping contents has little effect on changing the electric structures.

36 MATERIALS SCIENCE↗

Solution precursor plasma deposition of nanostructured CdS thin films

Highlights: Black-Right-Pointing-Pointer Inexpensive process with capability to produce large scale nanostructured coatings. Black-Right-Pointing-Pointer Technique can be employed to spray the coatings on any kind of substrates including polymers. Black-Right-Pointing-Pointer The CdS coatings developed have good electrical conductivity and optical properties. Black-Right-Pointing-Pointer Coatings possess large amount of particulate boundaries and nanostructured grains. -- Abstract: Cadmium sulfide (CdS) films are used in solar cells, sensors and microelectronics. A variety of techniques, such as vapor based techniques, wet chemical methods and spray pyrolysis are frequently employed to develop adherent CdS films. In the present study, rapid deposition of CdS thin films via plasma spray route using a solution precursor was investigated, for the first time. Solution precursor comprising cadmium chloride, thiourea and distilled water was fed into a DC plasma jet via an axial atomizer to create ultrafine droplets for instantaneous and accelerated thermal decomposition in the plasma plume. The resulting molten/semi-molten ultrafine/nanoparticles of CdS eventually propel toward the substrate to form continuous CdS films. The chemistry of the solution precursor was found to be critical in plasma pyrolysis to control the stoichiometry and composition of the films. X-ray diffraction studies confirmed hexagonal {alpha}-CdS structure. Surface morphology and microstructures were investigated to compare with other synthesis techniques in terms of process mechanism and structural features. Transmission electron microscopy studies revealed nanostructures in the atomized particulates. Optical measurements indicated a decreasing transmittance in the visible light with increasing the film thickness and band gap was calculated to be {approx}2.5 eV. The electrical resistivity of the films (0.243 {+-} 0.188 Multiplication-Sign 10{sup 5} {Omega} cm) was comparable with the literature values. These nanostructured polycrystalline CdS films could be useful in sensing and solar applications.

36 MATERIALS SCIENCE↗