Search NASA⌕ Search

SEARCH · Search NASA

Results for “technical evaluation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Results of ISO/TS 6336-22 Evaluating Full Contact Zone

ISO/TS 6336-22 (Calculation of load capacity of spur and helical gears - Part 22: Calculation of micropitting load capacity) is the ISO technical specification containing a proposal for calculations of the risk of micropitting in gear sets. Micropitting is a Hertzian fatigue phenomenon that appears as ultra-fine cracking and pitting on the flanks of gear teeth. Since progressive micropitting can lead to macropitting and flank damage, critical applications such as wind turbines, marine drives, and high-speed gear drives seek to accurately predict whether their designs are susceptible to this damage. ISO/TS 6336-22 assesses micropitting risk through a safety factor which is calculated as the minimum specific film thickness in the contact zone divided by a permissible specific film thickness. In the previous paper, the calculations were performed using the simplified method (Method B) that evaluates points on the path of contact. This was done for three gear sets that experienced micropitting in operation. The minimum specific film thickness for the two field cases was very high, which indicates that the gears were operating in the full elastohydrodynamic lubrication (EHL) regime. A more accurate calculation for these cases (Method A) calculates the specific film thickness across the entire contact zone. This paper applies this Method to the case study from the previous paper. The results are compared to micropitting observed in operation. Results are also compared to the results of the previous paper. Conclusions are made regarding the accuracy of both Methods compared to the field cases and relative to each other.

gearbox↗
DOE OSTI2023

A Field Study of Nonintrusive Load Monitoring Devices and Implications for Load Disaggregation

Evaluations of nonintrusive load monitoring (NILM) algorithms and technologies have mostly occurred in constrained, artificial environments. However, few field evaluations of NILM products have taken place in actual buildings under normal operating conditions. This paper describes a field evaluation of a state-of-the-art NILM product, tested in eight homes. The match rate metric—a technique recommended by a technical advisory group—was used to measure the NILM’s success in identifying specific loads and the accuracy of the energy consumption estimates. A performance assessment protocol was also developed to address common issues with NILM mislabeling and ground-truth comparisons that have not been sufficiently addressed in past evaluations. The NILM product’s estimates were compared to the submetered consumption of eight major appliances. Overall, the product had good performance in disaggregating the energy consumption of the electric water heaters, which included both electric resistance and heat-pump water heaters, but only a fair accuracy with refrigerators, dryers, and air conditioners. The performance was poor for cooking equipment, furnace fans, clothes washers, and dishwashers. Moreover, the product was often unable to detect major loads in homes. Typically, two or more appliances were not detected in a home. At least two dryers, furnace fans, and air conditioners went undetected across the eight homes. On the other hand, the dishwasher was detected in all homes where available or monitored. The key findings were qualitatively compared to those of past field evaluations. Potential areas for improvement in NILM product performance were determined along with areas where complementary technologies may be able to aid in load-disaggregation applications.

47 OTHER INSTRUMENTATION↗
DOE OSTI2018

Nuclear Technology Research and Development (NTRD) Technical Monthly January FY18

A set of U 3 Si 5 crystal growths have been completed, varying crystal pull rate, rotation rate and crystal size to evaluate the effect of crystal growth parameters on the quality and uniformity of the resultant crystals in order to determine the best set of growth conditions to produce crystals suitable for use as reference materials. The reference crystals can then be used for a variety of experiments to produce a consistent data set to inform modeling and simulation. Characterization of these crystals is ongoing. (K. McClellan)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Qualitative and Quantitative Evaluation for Representative Human Reliability Analysis Methods

The Korea Institute of Nuclear Safety (KINS) is the regulatory expert organization established by the Korean government to strengthen the nation’s technical capabilities relating to nuclear safety regulation. KINS oversees the technical aspects of nuclear safety regulation, including safety reviews, inspections, education, and safety research—all conducted based on technical knowledge and accumulated regulatory experience. In 2023, KINS requested that Idaho National Laboratory (INL) validates representative human reliability analysis (HRA) methods used throughout the world, thus affording KINS with a basis for determining an HRA method adequate for its domestic regulatory purposes. The present paper mainly examines INL’s efforts in this regard. The resulting INL study covered four representative HRA methods widely used by nuclear utilities and regulatory institutes. These methods were qualitatively evaluated by applying specific evaluation criteria and determining how well each method reflected critical HRA issues. For this assessment, INL benchmarked the Halden International HRA Empirical Study. Using the Halden empirical data, along with information on human failure events (HFEs), the present study employed the selected HRA methods to estimate human error probabilities (HEPs) for the HFEs. It also performed statistical analyses to compare the HEPs predicted via the HRA methods against those from the Halden empirical data.

99 - GENERAL AND MISCELLANEOUS↗
DOE OSTI2016

Biochar from Biomass and its Potential Agronomic and Environmental Use in Washington: A Promising Alternative to Drawdown Carbon from the Atmosphere and Develop a New Industry

Climate change is one of the most serious issues facing the world today. Increasing concentrations of carbon dioxide (CO 2 ) and other long-lived greenhouse gases (GHGs) in the atmosphere continue to warm the planet and destabilize the climate. It has been estimated that the impact from this warming could cost the state 10 billion per year by 2020, and 16 billion per year by 2040. Long-term solutions to the climate problem likely will require that large quantities of CO 2 be removed from the atmosphere. In fact, massive CO 2 drawdowns from the atmosphere have occurred in earth’s recent past from events occurring in our hemisphere. Studies of those analogs provide insight into the potential magnitude for specific actions to drawdown significant CO 2 from the atmosphere. One of these potential actions is the large-scale production of biochar from abundant woody biomass waste and its storage in soils, where it remains stable for hundreds to thousands of years. Moreover, for the carbon emission intensity of Washington’s fuel mix, biochar production from biomass is twice as effective in offsetting GHG emissions as complete biomass combustion of the same biomass. Washington State has large quantities of wood waste biomass that could be purposed for production of combined heat/power/biochar (CHPB) through existing biomass boilers. We propose to 1) evaluate the quantities of Washington wood waste biomass, 2) inventory existing boiler capacity and assess the technical merits and challenges to repurpose the boilers to CHPB, and 3) apply literature values and analog biochar examples to better quantify the extent of CO 2 drawdown that could be achieved in Washington State over the next century using engineered biochar. This white paper explores the potential to replicate the historical drawdowns of atmospheric CO 2 , a topic the authors think should be part of current climate-change mitigation discussions. This document is a companion to a white paper titled Biochar from Wood Biomass and Agricultural Residues and its Potential Agronomic Use in Washington: A Tool to Improve Irrigation Water Use Efficiency, Energy Efficiency and Sequester Carbon (Amonette, et al., 2016, in preparation).

09 BIOMASS FUELS↗
DOE OSTI2016

Protocol for Uniformly Measuring and Expressing the Performance of Energy Storage Systems

This Protocol provides a set of “best practices” for characterizing energy storage systems (ESSs) and measuring and reporting their performance. It serves as a basis for assessing how an ESS will perform with respect to key performance attributes relevant to different applications. It is intended to provide a valid and accurate basis for the comparison of different ESSs. By achieving the stated purpose, the Protocol will enable more informed decision-making in the selection of ESSs for various stationary applications. The Protocol identifies general information and technical specifications relevant in describing an ESS and also defines a set of test, measurement, and evaluation criteria with which to express the performance of ESSs that are intended for energy-intensive and/or power-intensive stationary applications. An ESS includes a storage device, battery management system, and any power conversion systems installed with the storage device. The Protocol is agnostic with respect to the storage technology and the size and rating of the ESS. The Protocol does not apply to single-use storage devices and storage devices that are not coupled with power conversion systems, nor does it address safety, security, or operations and maintenance of ESSs, or provide any pass/fail criteria.

25 ENERGY STORAGE↗
DOE OSTI2019

Inorganic Element Concentrations in Passerine Eggs Collected at Technical Areas 36, 39, and 16 at Los Alamos National Laboratory

In 2018, nonviable avian eggs were opportunistically collected at Los Alamos National Laboratory near open detonation sites at Technical Area (TA) 36 and TA-39 and near the TA-16 burning grounds and were evaluated for inorganic elements (mostly metals). A total of eight western bluebird Sialia mexicana ) and ash-throated flycatcher ( Myiarchus cinerascens ) egg samples were collected among the three locations of interest. Due to the small sample size, statistical comparisons could not be made. However, concentrations of inorganic elements observed in this study were compared with the upper-level bounds of background concentrations (mean + three standard deviations = 99% confidence interval; regional statistical reference level [RSRL]). Several inorganic elements were not detected in avian eggs and the majority of inorganic elements detected were below the RSRL. The few elements that exceeded the RSRL were below the lowest observable adverse effect level (LOAEL), when available. These data suggest that inorganic element concentrations in eggs observed here are not of ecological concern. As these data are preliminary, more data are needed to make a robust assessment, including additional background samples.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Enhanced Recovery Opportunities in the Appalachian Basin

The Midwest Regional Carbon Sequestration Partnership (MRCSP) has incorporated the work of geologic research teams (Geoteams) in its regional characterization, project planning and carbon dioxide (CO2) injection implementation work since the partnership was established by the U.S. Department of Energy (DOE) in 2003. Over this 16-year period, the cohort of Geoteams has grown from five to ten states and has contributed to the characterization of geologic sequestration opportunities, refinement of reservoir and seal data, and supported injection efforts through both predictive and post-injection assessments. The Appalachian Basin Geoteam consists of geologists from the state geological surveys of Kentucky, Maryland, New York, Ohio, Pennsylvania, and West Virginia. Pennsylvania and West Virginia led the research related to enhanced recovery opportunities in oil and gas fields, while Kentucky led the work associated with enhanced gas recovery (EGR) opportunities in organic-rich shales. The Appalachian Basin Geoteam evaluated reservoirs amenable to CO2-EOR and EGR using a combination of data sources and technical approaches. The Geoteam characterized the subsurface geology of the area in stepwise fashion, starting with existing geologic maps and fields/pools data generated as part of previous MRCSP regional characterization research. With this data, the Geoteam correlated stratigraphy and generated cross sections to delineate the extent, depths and thicknesses of those formations that may serve as reservoirs for either miscible or immiscible enhanced recovery projects. In addition, the team prepared structure and isopach maps for prospective formations, as well as assessments of gross and net porosity of these units. Once prospective localities were identified, the Geoteam selected a short list of oil fields in each of the three states for assessment for case study preparation.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

Nuclear Emergency Support Team Public Health and Safety [Slides]

RAP is the nation’s premier first-response resource for advising Federal, state, local and tribal decision-makers on steps to take to evaluate and minimize the hazards of a radiological or nuclear incident. RAP support ranges from giving technical information or advice over the telephone to sending highly trained personnel with state-of-the-art equipment to the incident site where team members help identify, characterize and minimize any radiological or nuclear hazards.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2023

2022 Results for Avian Monitoring of Inorganic Elements and Organic Chemical Concentrations in Passerine Eggs and Nestlings Collected from Technical Area 16 Burn Grounds, Technical Area 36 Minie, and Technical Area 39 Point 6 at Los Alamos National Laboratory

In 2022, nonviable avian eggs and one nestling were opportunistically collected at Los Alamos National Laboratory (LANL) near open detonation sites located at Technical Area (TA) 16 burn grounds, TA-36 Minie, and TA-39 Point 6. Samples were evaluated for inorganic elements (mostly metals) or per- and polyfluoroalkyl substances (PFAS). Three western bluebird (Sialia mexicana) egg samples were collected from TA-16 burn grounds. One deceased mountain bluebird (Sialia currucoides) nestling sample was collected from TA-36 Minie. One ash-throated flycatcher (Myiarchus cinerascens) egg sample was collected from TA-39 Point 6. Concentrations of inorganic elements (i.e., mostly metals) observed in this study were compared with the regional statistical reference level (RSRL), which is the upper-level bounds of background concentrations (mean + three standard deviations = 99% confidence interval). Several inorganic elements were not detected in avian eggs. All of the inorganic elements that were detected were below the RSRL and the lowest observable adverse effect level (LOAEL), when available. No PFAS compounds were detected in the mountain bluebird nestling sample collected from TA-36, and the majority of PFAS compounds were not detected in the western bluebird egg sample from TA-16. These data suggest that inorganic element and PFAS concentrations in eggs and nestlings are not of ecological concern. More data are needed to make a robust assessment and to evaluate trends over time.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Confirmation of Radiological Non-Impact Status for TA-08-0032, TA-11-0024 and -0036

Environmental Protection and Compliance, Environmental Stewardship (EPC-ES) has evaluated radiological process knowledge and surveys and found that the structures and associated building materials in Technical Area 8 Building 32 and Technical Area 11 Buildings 24 and 36 (TA-08-0032, TA-11-00024, and TA-11-0036, respectively) are candidates for unrestricted use and public release. This finding is consistent with the requirements of DOE Order 458.1, Radiation Protection of the Public and the Environment and LANL Procedure FSD-004, Environmental Radiation Protection.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Confirmation of Radiological Non-Impact Status for TA-16-380

Environmental Protection and Compliance, Environmental Stewardship (EPC-ES) has evaluated radiological process knowledge and surveys and found that the structure and associated building materials in Technical Area 16 Building 380 (TA-16-380) are candidates for unrestricted use and public release. This finding is consistent with the requirements of DOE Order 458.1, Radiation Protection of the Public and the Environment and LANL Procedure FSD-004, Environmental Radiation Protection.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1980

Aeronautical engineering: A continuing bibliography with indexes (supplement 119)

This bibliography lists 341 reports, articles, and other documents introduced into the NASA scientific and technical information system in January 1980. Abstracts on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems are presented. Research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles are also presented.

Source record↗
NASA NTRS1980

The impact of fuels on aircraft technology through the year 2000

In the future, it may be necessary to use jet fuels with a broader range of properties in order to insure a more flexible and reliable supply and to minimize energy consumption and processing costs at the refinery. This paper describes research being conducted to (1) determine the potential range of properties for future jet fuels, (2) establish a data base of fuel property effects on propulsion system components, (3) evolve and evaluate advanced component technology that would permit the use of broader property fuels and (4) identify technical and economic trade-offs within the overall fuel production-air transportation system associated with variations in fuel properties.

Grobman, J.↗
NASA NTRS1986

Eye-voice-controlled interface

The Ocular Attention-Sensing Interface System (OASIS) is an innovative human-computer interface which utilizes eye movement and voice commands to communicate messages between the operator and the system. This report initially describes some technical issues relevant to the development of such an interface. The results of preliminary experiments which evaluate alternative eye processing algorithms and feedback techniques are presented. Candidate interface applications are also discussed.

Glenn, Floyd A., III↗
NASA NTRS1990

Space station pressurized laboratory safety guidelines

Before technical safety guidelines and requirements are established, a common understanding of their origin and importance must be shared between Space Station Program Management, the User Community, and the Safety organizations involved. Safety guidelines and requirements are driven by the nature of the experiments, and the degree of crew interaction. Hazard identification; development of technical safety requirements; operating procedures and constraints; provision of training and education; conduct of reviews and evaluations; and emergency preplanning are briefly discussed.

Mcgonigal, Les↗
NASA NTRS1992

Power beaming research at NASA

NASA's current research activities to evaluate laser power beaming systems are summarized with regard to their applications of greatest interest. Key technical certainties and uncertainties pertaining to laser power beaming systems appropriate for space applications are quantified. A path of development is presented that includes maturation of key technology components for reliable laser and millimeter wave power beaming systems during the 1990s.

Rather, John D. G.↗