Search NASA⌕ Search

SEARCH · Search NASA

Results for “Application characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Observations of Ethylene-for-CO Ligand Exchanges on a Zeolite-Supported Single-Site Rh Catalyst by X-ray Absorption Spectroscopy

Quick-scanning X-ray absorption fine structure (QXAFS) measurements were used to characterize the exchanges of ethylene and CO ligands in a zeolite HY-supported single-site Rh complex at a sampling rate of 1.0 Hz. The two ligands were reversibly exchanged on the rhodium, with quantitative results determined for the C 2 H 4 -for-CO exchange that are consistent with a first-order process. The apparent rate constant for the exchange decreased with increasing temperature. Fourier-transform infrared spectra characterizing the C 2 H 4 sorbed in the zeolite showed that the amount decreased with increasing temperature, consistent with the decrease in the exchange rate with increasing temperature. Here the results, illustrating the dynamics of ligand exchanges on a single-site supported metal catalyst, demonstrate the broad emerging applicability of the QXAFS technique for characterizing the dynamics of reactive intermediates on catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2005

High-Power, High-Temperature Superconductor Technology Development

Since the first discovery of high-temperature superconductors (HTS) 10 years ago, the most promising areas for their applications in microwave systems have been as passive components for communication systems. Soon after the discovery, experiments showed that passive microwave circuits made from HTS material exceeded the performance of conventional devices for low-power applications and could be 10 times as small or smaller. However, for superconducting microwave components, high-power microwave applications have remained elusive until now. In 1996, DuPont and Com Dev Ltd. developed high-power superconducting materials and components for communication applications under a NASA Lewis Research Center cooperative agreement, NCC3-344 "High Power High Temperature Superconductor (HTS) Technology Development." The agreement was cost shared between the Defense Advanced Research Projects Agency's (DARPA) Technology Reinvestment Program Office and the two industrial partners. It has the following objectives: 1) Material development and characterization for high-power HTS applications; 2) Development and validation of generic high-power microwave components; 3) Development of a proof-of-concept model for a high-power six-channel HTS output multiplexer.

Bhasin, Kul B.↗
DOE OSTI2014

Application of Direct Current Potential Drop for the J-integral vs. Crack Growth Resistance Curve Characterization

The direct current potential drop (DCPD) technique has been applied to derive the J-integral vs. crack growth resistance curve (J-R curve) for fracture toughness characterization of structural materials. The test matrix covered three materials including type 316LN stainless steels, Ni-based alloy 617, and one ferritic-martensitic steel, three specimen configurations including standard compact, single edge bending, and disk-shaped compact specimens, and temperatures ranging from 20 C to 650 C. When compared with baseline J-R curves derived from the ASTM normalization method, the original J-R curves from the DCPD technique yielded much smaller Jq values due to the influence of crack blunting, plastic deformation, etc. on potential drop. To counter these effects, a new procedure for adjusting DCPD J-R curves was proposed. After applying the new adjustment procedure, the average difference in Jq between the DCPD technique and the normalization method was only 5.2% and the difference in tearing modulus was 7.4%. The promising result demonstrates the applicability of the DCPD technique for the J-R curve characterization especially in extreme environments, such as elevated temperatures, where the conventional elastic unloading compliance method faces considerable challenges.

DCPD↗
DOE OSTI2024

Darshan for HEP applications

Modern HEP workflows must manage increasingly large and complex data collections. HPC facilities may be employed to help meet these workflows’ growing data processing needs. However, a better understanding of the I/O patterns and underlying bottlenecks of these workflows is necessary to meet the performance expectations of HPC systems.Darshan is a lightweight I/O characterization tool that captures concise views of HPC application I/O behavior. It intercepts application I/O calls at runtime, records file access statistics for each process, and generates log files detailing application I/O access patterns.Typical HEP workflows include event generation, detector simulation, event reconstruction, and subsequent analysis stages. A study of the I/O behavior of the ATLAS simulation and filtering stage, and the CMS simulation workflow using Darshan is presented, including insights into the I/O operations and data access size.

Wang, Rui↗
NASA NTRS2002

Evaluation and Characterization Study of Dual Pulse Laser-Induced Spark (DPLIS) For Rocket Engine Ignition System Application

This paper addresses the progress of technology development of a laser ignition system at NASA Marshall Space Flight Center (MSFC). Initial hot-fire tests in a small-scale rocket chamber at MSFC have demonstrated the DPLIS concept having two main advantages over existing laser ignition concepts. First, the DPLIS can be potentially optimized its laser pulse format to maximize the initial plasma volume, the plasma lifetime, as well as the flame kernel growth rate. Characterization studies of the laser pulse format are now underway with experiments of igniting gaseous hydrogen/air in a Hencken burner. Once ignition is achieved, the flame is open to the atmosphere. This open environment allows easy access for diagnostics of the ignition phenomenon. The quick turn-around time of conducting experiments on this burner make it more amenable for conducting a large number of experiments for statistical analysis of the sensitivity of the test parameters. The results from these experiments will help optimize the laser format for future testing in an H2/O2 subscale rocket chamber.

Trinh, Huu P.↗
DOE OSTI2012

Mixtures of Gaussian wells: Theory, computation, and application

A primary challenge in unsupervised clustering using mixture models is the selection of a family of basis distributions flexible enough to succinctly represent the distributions of the target subpopulations. We introduce a new family of Gaussian well distributions (GWDs) for clustering applications where the target subpopulations are characterized by hollow (hyper-)elliptical structures. We develop the primary theory pertaining to the GWD, including mixtures of GWDs, selection of prior distributions, and computationally efficient inference strategies using Markov chain Monte Carlo. We demonstrate the utility of our approach, as compared to standard Gaussian mixture methods on a synthetic dataset, and exemplify its applicability on an example from immunofluorescence imaging, emphasizing the improved interpretability and parsimony of the GWD-based model.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2014

Confocal Raman Microscopy for Investigating Synthesis and Characterization of Individual Optically Trapped Vinyl-Polymerized Surfactant Particles

Small polymeric particles are increasingly employed as adsorbent materials, as molecular carriers, as delivery vehicles, and in preconcentration applications. The rational development of these materials requires in situ methods of analysis to characterize their synthesis, structure, and applications. Optical-trapping confocal Raman microscopy is a spectroscopic method capable of acquiring information at several stages of the development of such dispersed particulate materials. In the present study, an example material is developed and tested using confocal Raman microscopy for characterization at each stage of the process. Specifically, the method is used to investigate the synthesis, structure, and applications of individual polymeric surfactant particles produced by the vinyl polymerization of sodium 11-acrylamidoundecanoate (SAAU). The kinetics of polymerization can be monitored over time by measuring the loss of the acrylamide C=C functional groups using confocal Raman microscopy of particles optically trapped by the excitation laser, where, within the limits of detecting the vinyl functional group, the complete polymerization of the SAAU monomer was achieved. The polymerized SAAU particles are spherical, and they exhibit uniform access to water throughout their structure, as tested by the penetration of heavy water (D2O) and collection of spatially resolved Raman spectra from the interior of the particle. These porous particles contain hydrophobic domains that can be used to accumulate molecules for adsorption or carrier applications. This property was tested by using confocal Raman microscopy to measure the accumulation equilibria and kinetics of a model compound, dioxybenzone. The partitioning of this compound into the polymer surfactant could be determined on a quantitative basis using relative scattering cross sections of the SAAU monomer and the adsorbate. Furthermore, the study points out the utility of optical-trapping confocal Raman microscopy for investigating the synthesis, structure, and potential carrier applications of polymeric particle materials.

36 MATERIALS SCIENCE↗
NASA NTRS2001

Characterization of Transducers and Resonators under High Drive Levels

In many applications, piezoelectric transducers are driven at AC voltage levels well beyond the level for which the material was nominally characterized. In this paper we describe an experimental setup that allows for the determination of the main transducer or resonator properties under large AC drive. A sinusoidal voltage from a waveform generator is amplified and applied across the transducer/resonator in series with a known high power resistor. The amplitude of applied voltage and the amplitude and the relative phase of the current through the resistor are monitored on a digital scope. The frequency of the applied signal is swept through resonance and the voltage/current signals are recorded. After corrections for the series resistance and parasitic elements the technique allows for the determination of the complex impedance spectra of the sample as a function of frequency. In addition, access to the current signal allows for the direct investigation of non-linear effects through the application of Fourier transform techniques on the current signal. Our results indicate that care is required when interpreting impedance data at high drive level due to the frequency dependence of the dissipated power. Although the transducer/resonator at a single frequency and after many cycles may reach thermal equilibrium, the spectra as a whole cannot be considered an isothermal measurement due to the temperature change with frequency. Methods to correct for this effect will be discussed. Results determined from resonators of both soft and hard PZT and a ultrasonic horn transducer are presented.

transducers↗
DOE OSTI2018

Extraction and biomolecular analysis of dermal interstitial fluid collected with hollow microneedles

Dermal interstitial fluid (ISF) is an underutilized information-rich biofluid potentially useful in health status monitoring applications whose contents remain challenging to characterize. Here, we present a facile microneedle approach for dermal ISF extraction with minimal pain and no blistering for human subjects and rats. Extracted ISF volumes were sufficient for determining transcriptome, and proteome signatures. We noted similar profiles in ISF, serum, and plasma samples, suggesting that ISF can be a proxy for direct blood sampling. Dynamic changes in RNA-seq were recorded in ISF from induced hypoxia conditions. Finally, we report the first isolation and characterization, to our knowledge, of exosomes from dermal ISF. The ISF exosome concentration is 12–13 times more enriched when compared to plasma and serum and represents a previously unexplored biofluid for exosome isolation. This minimally invasive extraction approach can enable mechanistic studies of ISF and demonstrates the potential of ISF for real-time health monitoring applications.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Synthesis and characterization of photo-cross-linkable quince seed-based hydrogels for soft tissue engineering applications

The convenience, versatility, and biocompatibility of photocrosslinkable hydrogel precursors make them promising candidates for developing tissue engineering scaffolds. However, the current library of photosensitive materials is limited. This study reports, for the first time, the modification of quince seed mucilage (QS) with glycidyl methacrylate (GM), resulting in the synthesis of methacrylated QS (QSGM). The chemical composition and structure of QS were analyzed. The effects of reaction time, temperature, QS concentration, and GM/QS ratio on the degree of methacrylation, as well as the physicochemical, rheological, mechanical, and biological properties of the synthesized materials were explored. Chemical characterization using 1H NMR and FTIR confirmed the successful methacrylation of QS. Hydrogels fabricated from QSGMs at a 0.5 wt% concentration exhibited high swelling ratios of 320 to 580 g/g, and compressive strengths between 0.6 ± 0.1 and 1.2 ± 0.3 kPa. No significant changes in the rheological properties of hydrogel precursors were observed. Moreover, QSGM-based hydrogels supported cell encapsulation for 14 days with minimal cytotoxicity and immune cell activation. Finally, as a proof of concept, the potential use of QSGM for 3D printing was demonstrated. Overall, the results highlight the significant potential of QSGMs as a biomaterial of choice for soft tissue engineering applications.

3D printing↗
NASA NTRS2002

Numerical Filtering of Spurious Transients in a Satellite Scanning Radiometer: Application to CERES

The Clouds and Earth Radiant Energy System (CERES) scanning, radiometer was designed to provide high accuracy measurements of the radiances from the earth. Calibration testing of the instruments showed the presence of all undesired slow transient in the measurements of all channels at 1% to 2% of the signal. Analysis of the data showed that the transient consists of a single linear mode. The characteristic time of this mode is 0.3 to 0.4 s and is much greater than that the 8-10-ms response time of the detector, so that it is well separated from the detector response. A numerical filter was designed for the removal of this transient from the measurements. Results show no trace remaining of the transient after application of the numerical filter. The characterization of the slow mode on the basis of ground calibration data is discussed and flight results are shown for the CERES instruments aboard the Tropical Rainfall Measurement Mission and Terra spacecraft. The primary influence of the slow mode is in the calibration of the instrument and the in-flight validation of the calibration. This method may be applicable to other radiometers that are striving for high accuracy and encounter a slow spurious mode regardless of the underlying physics.

Smith, G. Louis↗
DOE OSTI2021

Colossal switchable photocurrents in topological Janus transition metal dichalcogenides

Nonlinear optical properties, such as bulk photovoltaic effects, possess great potential in energy harvesting, photodetection, rectification, etc. To enable efficient light–current conversion, materials with strong photo-responsivity are highly desirable. In this work, we predict that monolayer Janus transition metal dichalcogenides (JTMDs) in the 1T' phase possess colossal nonlinear photoconductivity owing to their topological band mixing, strong inversion symmetry breaking, and small electronic bandgap. 1T'JTMDs have inverted bandgaps on the order of 10 meV and are exceptionally responsive to light in the terahertz (THz) range. By first-principles calculations, we reveal that 1T' JTMDs possess shift current (SC) conductivity as large as 2300 nm μA V -2 , equivalent to a photo-responsivity of 2800 mA/W. The circular current (CC) conductivity of 1T' JTMDs is as large as ~10 4 nm μA V -2 . These remarkable photo-responsivities indicate that the 1T' JTMDs can serve as efficient photodetectors in the THz range. We also find that external stimuli such as the in-plane strain and out-of-plane electric field can induce topological phase transitions in 1T' JTMDs and that the SC can abruptly flip their directions. The abrupt change of the nonlinear photocurrent can be used to characterize the topological transition and has potential applications in 2D optomechanics and nonlinear optoelectronics.

Chemistry↗
DOE OSTI2014

Characterization, organic modification of wollastonite coated with nano-Mg(OH){sub 2} and its application in filling PA6

Highlights: • Wollastonite is first inorganic modified by coating nano-Mg(OH){sub 2} and then organic modified with silane. • Filling 30% of this composite powder in PA6 the mechanical properties, the heat distortion temperature and oxygen index of the PA6 composites were notably enhanced. - Abstract: Nano-Mg(OH){sub 2} was deposited on the surface of wollastonite (MW) powder with heterogeneous nucleation method and then modified with silane. The microstructure and surface properties of wollastonite (W) and MW powders were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectrometry (EDS) and X-ray diffraction (XRD), respectively. The microstructure of W, MW and silane modified MW (SMW) powders were characterized by Fourier translation infrared spectroscopy (FTIR). The mechanical properties, heat distortion temperature (HDT) and oxygen index (OI) of PA6 composites having different fillers were discussed. It was shown that the surface of wollastonite was coated with a layer of 33 nm thickness of Mg(OH){sub 2} grains and the distribution of which was uniform. The number of the hydroxyl groups on the surface of wollastonite powder increased after coated with Mg(OH){sub 2}. Filling 30% of SMW powder in PA6 the mechanical properties, HDT and OI were notably enhanced.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Unravelling the room temperature growth of two-dimensional h-BN nanosheets for multifunctional applications

The room temperature growth of two-dimensional van der Waals (2D-vdW) materials is indispensable for state-of-the-art nanotechnology. Low temperature growth supersedes the requirement of elevated growth temperatures accompanied with high thermal budgets. Moreover, for electronic applications, low or room temperature growth reduces the possibility of intrinsic film-substrate interfacial thermal diffusion related deterioration of the functional properties and the consequent deterioration of the device performance. Here, we demonstrated the growth of ultrawide-bandgap boron nitride (BN) at room temperature by using the pulsed laser deposition (PLD) process, which exhibited various functional properties for potential applications. Comprehensive chemical, spectroscopic and microscopic characterizations confirmed the growth of ordered nanosheet-like hexagonal BN (h-BN). Functionally, the nanosheets show hydrophobicity, high lubricity (low coefficient of friction), and a low refractive index within the visible to near-infrared wavelength range, and room temperature single-photon quantum emission. In conclusion, our work unveils an important step that brings a plethora of potential applications for these room temperature grown h-BN nanosheets as the synthesis can be feasible on any given substrate, thus creating a scenario for “h-BN on demand” under a frugal thermal budget.

2D h-BN↗
NASA NTRS2010

Targeting Low-Energy Ballistic Lunar Transfers

Numerous low-energy ballistic transfers exist between the Earth and Moon that require less fuel than conventional transfers, but require three or more months of transfer time. An entirely ballistic lunar transfer departs the Earth from a particular declination at some time in order to arrive at the Moon at a given time along a desirable approach. Maneuvers may be added to the trajectory in order to adjust the Earth departure to meet mission requirements. In this paper, we characterize the (Delta)V cost required to adjust a low-energy ballistic lunar transfer such that a spacecraft may depart the Earth at a desirable declination, e.g., 28.5(white bullet), on a designated date. This study identifies the optimal locations to place one or two maneuvers along a transfer to minimize the (Delta)V cost of the transfer. One practical application of this study is to characterize the launch period for a mission that aims to launch from a particular launch site, such as Cape Canaveral, Florida, and arrive at a particular orbit at the Moon on a given date using a three-month low-energy transfer.

Low-energy transfers↗
DOE OSTI2018

Importance of sample preparation on reliable surface characterisation of nano-objects: ISO Standard 20579-4

The international ISO Standard 20579-4, dealing with the history and preparation of nano-objects for surface analysis, has been developed to help address some of the replication and reproducibility issues caused by the fundamental nature of nano-objects. Although all types of samples requiring surface analysis need thoughtful preparation, nano-objects, for which many properties are controlled by their surfaces, present additional challenges in order to avoid variations and artefacts due to the handling and preparation of materials prior to analysis. This international standard is part of a series of standards related to preparation of samples for surface chemical analysis. Parts 1 and 2 of ISO Standard series 20579 address general issues that apply to many samples. Part 4 specifically considers issues that arise due to the inherent nature of nano-objects. Because of sensitivity to their environment, the standard indicates the minimum information that needs to be reported about the handling and preparation of nano-objects prior to surface analysis. This information should become part of sample provenance information that helps assure the reliability and usefulness of data obtained from surface-analysis in the context of the synthesis, processing and analysis history of a batch of material. Application of this standard can help address reproducibility and traceability issues associated with synthesis, processing, and characterization of nano-objects in research and commercial applications.

nano-object characterization, surface analysis, sa↗
DOE OSTI2021

Toward autonomous design and synthesis of novel inorganic materials

Autonomous experimentation driven by artificial intelligence (AI) provides an exciting opportunity to revolutionize inorganic materials discovery and development. Herein, we review recent progress in the design of self-driving laboratories, including robotics to automate materials synthesis and characterization, in conjunction with AI to interpret experimental outcomes and propose new experimental procedures. We focus on efforts to automate inorganic synthesis through solution-based routes, solid-state reactions, and thin film deposition. In each case, connections are made to relevant work in organic chemistry, where automation is more common. Characterization techniques are primarily discussed in the context of phase identification, as this task is critical to understand what products have formed during synthesis. The application of deep learning to analyze multivariate characterization data and perform phase identification is examined. To achieve “closed-loop” materials synthesis and design, we further provide a detailed overview of optimization algorithms that use active learning to rationally guide experimental iterations. Lastly, we highlight several key opportunities and challenges for the future development of self-driving inorganic materials synthesis platforms.

36 MATERIALS SCIENCE↗
NASA NTRS2023

Analysis of VFR Traffic Uncertainty and its Impact on Uncrewed Aircraft Operational Capacity at Regional Airports

This paper proposes a method to characterize Visual Flight Rules traffic around a regional airport. The applicability of the method is discussed in the context of Uncrewed Aircraft operations at a regional airport. The relation between traffic interaction uncertainty and operational capacity at the runway is also investigated. The spatio-temporal distribution of traffic operating under Visual Flight Rules is analyzed from historical track data and visualized as heat maps generated at different altitudes. These are used to characterize the spatio-temporal uncertainty associated with traffic density, around a given airport, down to the runway. The traffic patterns at the runway are used to compute the runway capacity as a function of the probability of interaction with traffic operating under visual flight rules. Fort Worth Alliance is used as a representative regional airport for the study. Applications of the traffic characterization methods developed in this paper are also discussed.

VFR traffic, uncertainty, air mobility↗