Search NASA⌕ Search

SEARCH · Search NASA

Results for “Capture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

CO{sub 2} capture from simulated syngas via cyclic carbonation/calcination for a naturally occurring limestone: pilot-plant testing

Experiments were performed using a dual fluidized bed reactor system, operated in a batch mode, in order to investigate the effects of steam and simulated syngas on CO{sub 2} capture and sorbent conversion efficiency for a naturally occurring Polish calcitic limestone. In addition, the effect of high partial pressures of CO{sub 2} on the calcination process was examined using either oxygen-enriched air or oxy-fuel combustion in the calciner. As expected, calcination under oxy-fuel conditions resulted in decreased carbonation conversion due primarily to particle sintering and pore pluggage. On average there was a decrease in carbonation conversion of approximately 36.5 and 33.4% for carbonation with steam and steam/simulated syngas, respectively, compared to similar experiments using oxygen-enriched air. However, during the carbonation of the limestone with steam present in the feed gas, it was observed that the high CO{sub 2} capture efficiency period was significantly extended compared to carbonation with only CO{sub 2} present. This resulted in increased CaO conversion from approximately 16.1 to 29.7% for the initial carbonation cycle. A further increase in carbonation conversion from 29.7 to 46.9%, was also observed when simulated syngas conditions (CO, H{sub 2}) were used in the carbonator. Analysis of the outlet gases also confirmed that the calcined limestone catalyzes the water gas shift reaction, which we believe results in enhanced CO{sub 2} concentration levels at the grain surfaces of the sorbent.

01 COAL, LIGNITE, AND PEAT↗

Systematic Tuning and Multifunctionalization of Covalent Organic Polymers for Enhanced Carbon Capture

Porous covalent polymers are attracting increasing interest in the fields of gas adsorption, gas separation, and catalysis due to their fertile synthetic polymer chemistry, large internal surface areas, and ultrahigh hydrothermal stabilities. While precisely manipulating the porosities of porous organic materials for targeted applications remains challenging, we show how a large degree of diversity can be achieved in covalent organic polymers by incorporating multiple functionalities into a single framework, as is done for crystalline porous materials. In this work, we synthesized 17 novel porous covalent organic polymers (COPs) with finely tuned porosities, a wide range of Brunauer–Emmett–Teller (BET) specific surface areas of 430–3624 m 2 g –1 , and a broad range of pore volumes of 0.24–3.50 cm 3 g –1 , all achieved by tailoring the length and geometry of building blocks. Furthermore, we are the first to successfully incorporate more than three distinct functional groups into one phase for porous organic materials, which has been previously demonstrated in crystalline metal–organic frameworks (MOFs). COPs decorated with multiple functional groups in one phase can lead to enhanced properties that are not simply linear combinations of the pure component properties. For instance, in the dibromobenzene-lined frameworks, the bi- and multifunctionalized COPs exhibit selectivities for carbon dioxide over nitrogen twice as large as any of the singly functionalized COPs. These multifunctionalized frameworks also exhibit a lower parasitic energy cost for carbon capture at typical flue gas conditions than any of the singly functionalized frameworks. Despite the significant improvement, these frameworks do not yet outperform the current state-of-art technology for carbon capture. Nonetheless, the tuning strategy presented here opens up avenues for the design of novel catalysts, the synthesis of functional sensors from these materials, and the improvement in the performance of existing covalent organic polymers by multifunctionalization.

mathematical methods↗

In Situ Doping Strategy for the Preparation of Conjugated Triazine Frameworks Displaying Efficient CO 2 Capture Performance

An in situ doping strategy has been developed for the generation of a novel family of hexaazatriphenylene-based conjugated triazine frameworks (CTFs) for efficient CO 2 capture. The resulting task-specific materials exhibit an exceptionally high CO 2 uptake capacity (up to 4.8 mmol g –1 at 297 K and 1 bar). The synergistic effects of ultrananoporosity and rich N/O codoped CO 2 -philic sites bestow the framework with the highest CO 2 adsorption capacity among known porous organic polymers (POPs). This innovative approach not only enables superior CO 2 separation performance but also provides tunable control of surface features on POPs, thereby affording control over bulk material properties. In conclusion, we anticipate this novel strategy will facilitate new possibilities for the rational design and synthesis of nanoporous materials for carbon capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A series of cation-modified robust zirconium-based metal–organic frameworks for carbon dioxide capture

Metal–organic frameworks (MOFs) represent one of the most promising porous solids for possible use as sorbents to control and reduce the greenhouse gas emission. Studies have shown that open metal sites (OMS) interact strongly with carbon dioxide and thus, serve as efficient binding sites for CO 2 capture. However, many OMS-bearing MOFs are lack of framework stability and often have high regeneration temperature. To seek ways to solve the stability issue, we designed a series of isoreticular MOFs, Zr-tcpb-COOM (M = alkali/alkaline earth metal), by exchange of protons with metal ions on Zr-tcpb-COOH via post-synthetic modification (PSM). The pristine MOF (Zr-tcpb-COOH) has a very robust framework. The PSM process does not deteriorate the framework stability but creates metal binding sites that form strong bonds with carbon dioxide. The results show that at low CO 2 pressure, the uptake amount is enhanced considerably using Zr-tcpb-COOM and is in trend of increasing atomic number (Li + < Na + < K + < Ca 2+ ). High adsorption selectivity (CO 2 /N 2 IAST selectivity (15 : 85) = 539.5) is also achieved for CO 2 over N 2 at room temperature. This approach offers a feasible method to improve CO 2 capture capacity, especially at low concentrations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identifying mechanistic differences between co-fed CO 2 hydrogenation and reactive CO 2 capture using Ru and Pd dual function materials

Dual function materials (DFMs) enable reactive carbon capture (RCkeC), an intensified approach to carbon dioxide capture and utilization for cost and energy input reductions. Yet, there is a fundamental lack of understanding of mechanisms around CO 2 adsorption and subsequent conversion on these materials, hindering further development. Herein, we investigated several supported alkaline metal oxides for their CO 2 adsorption characteristics to find that Na/Al 2 O 3 had the highest CO 2 adsorption capacity, accompanied by a variety of CO 2 adsorption geometries as identified by in situ DRIFTS and computational modeling. The addition of catalytic metals (Ru, Pd) increased the adsorption capacity of Na/Al 2 O 3 without altering binding modes. In the subsequent reactive desorption step, acetate and formate intermediates were observed. Notably, this mechanistic investigation identified that the formation of acetate species was unique to RCC on a DFM, as these species were not observed in co-fed hydrogenation over the DFM or RCC over a Na-free catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Radiative Capture Process at the Coulomb Barrier: the Resonant {sup 12}C+{sup 16}O Case

In a recent experiment performed at Triumf using the Dragon 0 deg. spectrometer and its associated BGO array we have measured for the first time the full gamma decay of the radiative capture channel close to the Coulomb barrier. This measurement has been performed at 3 energies E{sub cm} = 8.5, 8.8 and 9 MeV. We have extracted a radiative capture cross section more than five times larger than what had been previously observed. A selective contribution of the entrance spins 5{sup -} and 6{sup +} has also been evidenced whereas 1{sup -} to 3{sup -} spins are predicted to be predominant by coupled-channel calculations. At E{sub cm} = 9 MeV, stronger structural behaviour appears which is characterised by a larger total cross section and also by the particularly strong feeding of the {sup 28}Si prolate 4{sup +} state at 9.16 MeV. This level is explained by several models in terms of {sup 12}C-{sup 16}O cluster sub-structure. Our data is compared to such cluster-model predictions and the agreement is quite good.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurement of proton capture cross sections relevant to rp process with Coulomb dissociation

We have studied proton capture reactions on unstable proton-rich nuclei relevant to rapid proton-capture (rp) process using a Coulomb dissociation method. Using this method, three stellar reactions, {sup 22}Mg(p, {gamma}){sup 23}Al, {sup 26}Si(p, {gamma}){sup 27}P, and {sup 30}S(p, {gamma}){sup 31}Cl were studied at RIKEN Nishina Center. The radiative widths of the first excited state in {sup 23}Al and {sup 27}P, which are relevant to the stellar reactions, were obtained. We discuss the details of the Coulomb dissociation the astrophysical implications obtained from our studies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Design of a New Recoil Separator for Measurements of Radiative Capture Reactions in Astrophysics

The rates of proton- and alpha-capture reactions on unstable proton-rich nuclei are needed to understand the energy generation and element synthesis occurring in novae, X-ray bursts, and other explosions. Direct measurements of the cross sections of some of these reactions are now possible with radioactive beams and a recoil separator. A new device for such measurements, the Separator for CApture Reactions [SECAR], is being designed for use at the Facility for Rare Isotope Beams (FRIB). The specifications and preliminary conceptual design will be discussed along with plans for the first set of measurements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Neutron capture cross section measurements at the beam line 04 of J-PARC/MLF

An Accurate Neutron-Nucleus Reaction measurement Instrument (ANNRI) at the beam line 04 of MLF (Material and Life Sciences Experimental Facilities) of J-PARC (Japan Proton Accelerator Research Complex) was installed to measure neutron capture cross sections related to the research and development of innovative nuclear systems, the study on nuclear astrophysics, etc. ANNRI has two gamma-ray spectrometers: one is a Ge detector array placed at 22 m from the coupled type moderator of the spallation neutron source of J-PARC/MLF and the other is a pair of NaI(Tl) detectors at 28 m. Until the 11th of March, 2011, when we had big earthquakes, we measured capture cross sections of Zr-93, Tc-99, Pd-107, I-129, Cm-244, Cm-246, etc. After checking and repairing ANNRI, we restarted measurements, and ANNRI has been open to worldwide users at present.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Determination of radiative neutron capture cross sections for unstable nuclei by the {gamma}-ray strength function method

An indirect method referred to as the {gamma}-ray strength function method has been devised to determine radiative neutron capture cross sections for unstable nuclei along the valley of {beta}-stability. This method is based on the {gamma}-ray strength function which interconnects radiative neutron capture and photoneutron emission within the statistical model. The method was applied to several unstable nuclei such as {sup 93,95}Zr, {sup 107}Pd, and 121,123Sn. This method offers a versatile application extended to unstable nuclei far from the stability when combined with Coulomb dissociation experiments at RIKEN-RIBF and GSI.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A new theoretical approach to thermonuclear radiative-capture reaction rate

We propose a new computational method for astrophysical reaction rate of radiative capture process, which does not require any solution of scattering problem. It is tested for twobody radiative caputure reaction {sup 16}O({alpha},{gamma}){sup 20}Ne and a comparison is made with an ordinary method solving two-body scattering problem. The method is shown to work well in practice and thus will be useful for problems in which an explicit construction of scattering solution is difficult such as the triple-alpha capture process.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Neutron capture measurement on {sup 173}Lu at LANSCE with DANCE detector

The (n,{gamma}) cross section on the unstable {sup 173}Lu(t{sub 1/2} = 1.37y) has been measured from thermal energy up to 200 eV at Los Alamos Neutron Science Center (LANSCE) with The Detector for Advanced Neutron Capture Experiements (DANCE). The main aim of this study is to validate and optimize reaction models for unstable nucleus. A preliminary capture yield will be presented in this paper.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electron transfer and capture dynamics in ZnSe quantum wells grown on GaAs

We investigate the transfer and capture dynamics of electrons in phase coherent photorefractive ZnSe quantum wells grown on GaAs using degenerate three-beam four-wave-mixing. The measurements reveal electron capture times by the quantum well in the order of several tens of picoseconds and a transit time of approximately 5 picoseconds from the GaAs substrate through the ZnMgSe barrier.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nonradiative coherent carrier captures and defect reaction at deep-level defects via phonon-kick mechanism

We simulated the time evolution of electron-lattice coupling mode, and a series of nonradiative carrier captures by a deep-level defect in a semiconductor. For lattice relaxation energy of the order of the band gap, a series of coherent (athermal) electron and hole captures by a defect is possible for high carrier densities, which results in an inflation in the induced lattice vibration, which in turn enhances a defect reaction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact of the uncertainty in α-captures on {sup 22}Ne on the weak s-process in massive stars

Massive stars at solar metallicity contribute to the production of heavy elements with atomic masses between A = 60 and A = 90 via the so-called weak s-process (which takes place during core He and shell C burning phases). Furthermore, recent studies have shown that rotation boosts the s-process production in massive stars at low metallicities, with a production that may reach the barium neutron-magic peak. These results are very sensitive to neutron source and neutron poison reaction rates. For the weak s-process, the main neutron source is the reaction {sup 22}Ne(α,n){sup 25}Mg, which is in competition with {sup 22}Ne(α,γ){sup 26}Mg. The uncertainty of both rates strongly affects the nucleosynthesis predictions from stellar model calculations. In this study, we investigate the impact of the uncertainty in α-captures on {sup 22}Ne on the s-process nucleosynthesis in massive stars both at solar and at very low metallicity. For this purpose, we post-process, with the Nugrid mppnp code, non-rotating and rotating evolutionary models 25M{sub ⊙} stars at two different metallicities: Z = Z{sub ⊙} and Z = 10{sup −5}Z{sub ⊙}, respectively. Our results show that uncertainty of {sup 22}Ne(α,n){sup 25}Mg and {sup 22}Ne(α,γ){sup 26}Mg rates have a significant impact on the final elemental production especially for metal poor rotating models. Beside uncertainties in the neutron source reactions, for fast rotating massive stars at low metallicity we revisit the impact of the neutron poisoning effect by the reaction chain {sup 16}O(n,γ){sup 17}O(α,γ){sup 21}Ne, in competition with the {sup 17}O(α,n){sup 20}Ne, recycling the neutrons captured by {sup 16}O.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Systematic muon capture rates in PQRPA

In this work we performed a systematic study of the inclusive muon capture rates for several nuclei with A < 60 using the Projected Random Quasi-particle Phase Approximation (PQRPA) as nuclear model, because it is the only RPA model that treats the Pauli Principle correctly. We reckon that the comparison between theory and data for the inclusive muon capture is not a fully satisfactory test on the nuclear model that is used. The exclusive muon transitions are more robust for such a purpose.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Note: Consecutive capture of images of ions and electrons using high-voltage vacuum relay

For the first time, images of both ions and electrons appearing on a fluorescent screen attached to a micro-channel plate (MCP) [S. Nakata et al., “Applicability of micro-channel plate followed by phosphor screen to charged particles,” Rev. Sci. Instrum. (submitted)] were captured in one attempt. The profile of electrostatic potential applied externally to the MCP with the fluorescent screen was quickly changed using a high-voltage vacuum relay. This method allows consecutive images of ions and electrons to be successfully captured.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗