Search NASA⌕ Search

SEARCH · Search NASA

Results for “EVAPORATION MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Onset of band structure in 70 Ga

Excited states in the odd-odd nucleus 70 Ga were studied using the 62 Ni( 14 C, αpn) fusion-evaporation reaction at the John D. Fox Superconducting Accelerator Laboratory at Florida State University with a 50 MeV beam. Depopulating γ rays were measured in coincidence with a Compton-suppressed Ge array consisting of three Clover detectors and seven single-crystal detectors. Analysis of γ–γ coincidences led to the addition of 16 new transitions to the 70 Ga level scheme, including transitions associated with the onset of a new positive-parity band structure likely based on the πg 9/2 ⊗ νg 9/2 configuration. Spins and parities were assigned using directional correlation of oriented nuclei (DCO) ratios and linear polarization measurements. Shell-model calculations with the JUN45 effective interaction reproduce the excitation energies of the positive-parity states reasonably well but predict negative-parity states that are typically 400–500 keV lower than observed. Furthermore, total Routhian surface calculations for the lowest positive-parity configuration with signature α = 0 indicate significant triaxiality (γ ≈ −20°) and the development of competing non-collective excitations at J = 8, corresponding to the experimentally observed onset of the positive-parity band. Similar features are found in the calculated surfaces for the lowest negative-parity states with α = 0.

59 ≤ A ≤ 89↗
DOE OSTI2023

Coexistence of single-particle and collective excitation in Ni 61

Here, the high-spin states in 61 Ni have been studied using the fusion evaporation reaction, 50 Ti( 14 C, 3n) 61 Ni at an incident beam energy of 40 MeV. A Compton suppressed multi-HPGe detector setup, consisting of six clover detectors and three single-crystal HPGe detectors, was used to detect the de-exciting $\gamma$ rays from the excited states. The level scheme has been extended up to an excitation energy of 12.8 MeV and a tentative J π =35/2 + . The low-lying negative parity levels are found to be generated by single-particle excitation within the fp shell and also excitations to the g 9/2 orbitals as explained well with shell model calculations using the GXPF1Br+V MU (modified) interaction. Two rotational structures of regular E2 sequences with small to moderate axial deformation have been established at higher excitation energy. Most interestingly, two sequences of M1 transitions are reported for the first time and described as magnetic rotational bands. The shears mechanism for both the bands can be described satisfactorily by the geometrical model. The shell model calculation involving the cross shell excitation beyond the fp shell well reproduce the M1 and E2 sequences. The shell model predicted B(M1) values for the magnetic rotational band B1 show the decreasing trend with spin as expected with closing of the shears.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Experimental study of the S 38 excited level scheme

Information on the 38 S level scheme was expanded through experimental work utilizing a fusion-evaporation reaction and in-beam γ-ray spectroscopy. Prompt γ-ray transitions were detected by the Gamma-Ray Energy Tracking Array (GRETINA) and recoiling 38 S residues were selected by the Fragment Mass Analyzer (FMA). Tools based on machine-learning techniques were developed and deployed for the first time in order to enhance the unique selection of 38S residues and identify any associated γ-ray transitions. The new level information, including the extension of the even-spin yrast sequence through J π =8( + ), was interpreted in terms of a basic single-particle picture as well shell-model calculations which incorporated the empirically derived FSU interaction. A comparison between the properties of the yrast states in the even-Z, N = 22 isotones from Z = 14 to 20, and for 36 Si– 38 S in particular, was also presented with an emphasis on the role and influence of the neutron 1 p 3/2 orbital on the structure in the region.

20 ≤ A ≤ 38↗
DOE OSTI2020

Analytical Investigation of the Role of Lateral Mixing in the Evolution of Nonprecipitating Cumulus. Part II: Dissolving Stage

A minimalistic analytical model allowing analysis of the dissolving stage of nonprecipitating convective clouds is proposed. The model takes into account two mechanisms: turbulent mixing with a dry environment and cloud volume settling. The temporal changes in the spatial structure of a cloud and in its immediate environment in the course of cloud dissolving are analyzed. The comparison of the effects of a temperature increase in the course of cloud descent and mixing with dry surrounding air shows that the descent is a dominating factor determining a decrease in the liquid water content (LWC), while mixing has a stronger effect on the cloud shape. Narrowing/broadening of clouds due to lateral mixing with dry air during cloud dissolving is determined by the potential evaporation parameter proportional to the ratio of the saturation deficit in the cloud environment to LWC. An equation for cloud dissolving time is obtained. After a cloud totally dissolves, it leaves behind an area with humidity exceeding that of the environment. The main parameter determining the dissolving time is the downdraft velocity. It should exceed 50 cm s -1 in order to provide reasonable dissolving time. The turbulent intensity, LWC, and humidity of the environment air also have an impact on dissolving time: the lower the LWC and the humidity of environment air, the faster cloud dissolving is. The simple solution presented in this paper can be useful for evaluation of cloud characteristics at the dissolving stage and can be included in procedures of parameterization of cloud cover formed by nonprecipitating or slightly precipitating cumulus clouds (Cu). Values of the environment humidity and temperature, LWC at cloud top, cloud width, vertical velocity of downdraft, and the turbulent coefficient should be parameters of this parameterization.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Active Divertor Heat Flux Control using Impurity Powder Dropper

Divertor plasma-facing components (PFCs) in a tokamak are typically designed to withstand average steady-state heat loads of about 5–10 MW/m 2 , a limit that applies to both solid and liquid lithium (LL) PFCs. Exceeding these design values can result in surface damage to tungsten PFCs or excessive lithium (Li) evaporation in liquid lithium divertor (LLD) PFCs. Since exceeding the divertor heat load limits has serious consequences, it is therefore prudent to develop a tool to reduce the divertor heat load and bring the heat load to within the design limit without affecting the plasma performance. Active low Z impurity injection such as Li has been suggested as a potential solution to mitigate excess heat flux as suggested previously, given that non-coronal radiation can be quite large ~ 20–30 MJ per mole of injected Li. Li is considered desirable for reducing the edge neutral recycling helping to improve plasma energy confinement. In this paper, we model the Impurity Power Dropper (IPD) to investigate its potential of divertor heat flux control. The IPD is typically located at the top of the tokamak device and uses a vertical drift tube of a few meters. In the 2 m drift tube case, the IPD powder is accelerated to ~ 6 m/sec before reaching the plasma with the upper divertor configuration, matching the condition for the in-board side pellet injection case. By modeling the IPD geometry we determined the IPD powder deposition profile, and thus the non-coronal radiation and ionization profiles in time as well. From the enhanced radiation power loss, it is therefore possible to reduce the divertor heat load using the divertor simulation code. In conclusion, the IPD divertor heat flux control can be tested in the facilities with IPD including ST-40, DIII-D, EAST, WEST and NSTX-U.

Active lithium injection↗
DOE OSTI2011

Layered inorganic/organic mercaptopropyl pendant chain hybrid for chelating heavy cations

Graphical abstract: Crystalline lamellar silicate RUB-18 was immobilized with mercaptopropyl groups at the surface and then used as support for cadmium and lead removal from aqueous solutions. Highlights: Black-Right-Pointing-Pointer Synthetic methodology requires intercalation. Black-Right-Pointing-Pointer Organofunctionalized ilerite compound as sorbent. Black-Right-Pointing-Pointer Active mercaptopropyl groups remove cations. Black-Right-Pointing-Pointer High maximum sorption capacity for cadmium. -- Abstract: Heavy metal sorbents with uptake capacities for divalent cadmium and lead cation removal from aqueous solutions have been synthesized by grafting mercaptopropyltrimethoxysilane onto the surface of two different precursors obtained from lamellar ilerite, its acidic and the cetyltrimethylammonium exchanged forms. The organofunctionalization was carried out by two different procedures: reflux and solvent evaporation methodologies. Elemental analysis data based on carbon content gave 1.37 and 3.53 mmol of organic pendant groups per gram of hybrid by the reflux method, when starting from acidic ilerite and the surfactant form. X-ray diffraction corroborated the maintenance of the original crystallinity. Infrared spectroscopy and nuclear magnetic resonance for {sup 29}Si and {sup 13}C nuclei are in agreement with the success of the proposed method. The sulfur basic centers attached to the lamellar structure are used to coordinate both cations at the solid/liquid interface. The isotherms were obtained through the batchwise process and the experimental data were adjusted to the Freundlich model. The maximum sorption capacities of 5.55 and 5.12 mmol g{sup -1} for lead and 6.10 and 7.10 mmol g{sup -1} for cadmium were obtained for organofunctionalized ilerite and its surfactant form, synthesized by reflux methodology. This behavior suggested that these hybrids could be employed as promising sorbents with a polluted system.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Detection of an Atmosphere on a Rocky Exoplanet

We report the detection of an atmosphere on a rocky exoplanet, GJ 1132 b, which is similar to Earth in terms of size and density. The atmospheric transmission spectrum was detected using Hubble WFC3 measurements and shows spectral signatures of aerosol scattering, HCN, and CH{sub 4} in a low mean molecular weight atmosphere. We model the atmospheric loss process and conclude that GJ 1132 b likely lost the original H/He envelope, suggesting that the atmosphere that we detect has been reestablished. We explore the possibility of H{sub 2} mantle degassing, previously identified as a possibility for this planet by theoretical studies, and find that outgassing from ultra-reduced magma could produce the observed atmosphere. In this way we use the observed exoplanet transmission spectrum to gain insights into magma composition for a terrestrial planet. The detection of an atmosphere on this rocky planet raises the possibility that the numerous powerfully irradiated super-Earth planets, believed to be the evaporated cores of sub-Neptunes, may, under favorable circumstances, host detectable atmospheres.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Ultralight scalars as cosmological dark matter

Many aspects of the large-scale structure of the Universe can be described successfully using cosmological models in which 27 ± 1% of the critical mass-energy density consists of cold dark matter (CDM). However, few—if any—of the predictions of CDM models have been successful on scales of ~10 kpc or less. This lack of success is usually explained by the difficulty of modeling baryonic physics (star formation, supernova and black-hole feedback, etc.). An intriguing alternative to CDM is that the dark matter is an extremely light (m ~10 -22 eV) boson having a de Broglie wavelength λ ~1 kpc, often called fuzzy dark matter (FDM). Here we describe the arguments from particle physics that motivate FDM, review previous work on its astrophysical signatures, and analyze several unexplored aspects of its behavior. In particular, (i) FDM halos or subhalos smaller than about 10 7 (m/10 -22 eV) -3/2 M ⊙ do not form, and the abundance of halos smaller than a few times 10 10 (m/10 -22 eV) -4/3 M ⊙ is substantially smaller in FDM than in CDM. (ii) FDM halos are comprised of a central core that is a stationary, minimum-energy solution of the Schrödinger-Poisson equation, sometimes called a “soliton,” surrounded by an envelope that resembles a CDM halo. The soliton can produce a distinct signature in the rotation curves of FDM-dominated systems. (iii) The transition between soliton and envelope is determined by a relaxation process analogous to two-body relaxation in gravitating N-body systems, which proceeds as if the halo were composed of particles with mass ~ ρλ 3 where ρ is the halo density. (iv) Relaxation may have substantial effects on the stellar disk and bulge in the inner parts of disk galaxies, but has negligible effect on disk thickening or globular cluster disruption near the solar radius. (v) Relaxation can produce FDM disks but a FDM disk in the solar neighborhood must have a half-thickness of at least ~300 (m/10 -22 eV) -2/3 pc and a midplane density less than 0.2(m/10 -22 eV) 2/3 times the baryonic disk density. (vi) Solitonic FDM subhalos evaporate by tunneling through the tidal radius and this limits the minimum subhalo mass inside ~30 kpc of the Milky Way to a few times 10 8 (m/10 - 22 eV) -3/2 M ⊙ . (vii) If the dark matter in the Fornax dwarf galaxy is composed of CDM, most of the globular clusters observed in that galaxy should have long ago spiraled to its center, and this problem is resolved if the dark matter is FDM. (viii) FDM delays galaxy formation relative to CDM but its galaxy-formation history is consistent with current observations of high-redshift galaxies and the late reionization observed by Planck. If the dark matter is composed of FDM, most observations favor a particle mass ≳ 10 -22 eV and the most significant observational consequences occur if the mass is in the range 1 -10 × 10 - 22 eV. There is tension with observations of the Lyman-α forest, which favor m ≳10 - 20 × 10 -22 eV and we discuss whether more sophisticated models of reionization may resolve this tension.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Performance assessment of a real water source heat pump within a hardware-in-the-loop (HIL) testing environment

Over the last decade, the global fight against climate change through electrification has led to an increase in research on building heating, ventilation, and air conditioning (HVAC) systems that utilize intelligent control algorithms to provide demand-side grid service while also maintaining the thermal comfort of building occupants. As the pivotal point between building electricity consumption and indoor thermal comfort, high-efficiency electrical vapor-compression heat pumps are at the center of these emerging studies, and various grid-interactive and occupant-comfort control algorithms have been developed for them. The impact of these algorithms on heat pump operation and performance when subjected to different weather conditions, building loads, and grid requests calls for investigation and verification via experimental testing with actual heat pumps integrated with real-time building and grid responses. This study introduces a Water-Source Heat Pump (WSHP) Hardware-in-The-Loop (HIL) Test Facility that is the first of its kind. This testbed utilizes a 2-ton variable speed water-to-air heat pump that is capable of interacting with a virtual environment currently comprised of an EnergyPlus (E+) building simulation, an agent-based occupant behavioral model, and a single U-tube ground-loop heat exchanger (GLHE) model. Detailed descriptions of the testbed’s physical design and operation, virtual environment, as well as their mutual communication is provided. An uncertainty analysis is also performed under manufacturer specified heating and cooling design conditions. This analysis shows that the total load across the WSHP’s demand side heat exchanger, i.e., the sum of its latent and sensible components, can be measured with a relative uncertainty of ± 10.4% and ± 3.6% in cooling and heating mode respectively. The WSHP’s coefficient of performance (COP) can be measured with relative uncertainties of ± 10.4% in cooling mode, and ± 3.7% in heating mode. A preliminary 24-h experimental demonstration is then performed utilizing the DOE prototype small commercial office building model in E+. The simulation takes place in Atlanta, GA on the date of 08/26/15 from 12:00 AM to 11:59 PM using TMY3 weather data. Here, the results from this demonstration show that over the course of this experiment the simulated outputs of zone dry-bulb temperature, zone humidity ratio, and WSHP inlet water temperature can be tracked by testbed emulators up to a root mean squared error (RMSE) of ± 0.27 °C, ± 0.376 g/kg, and ± 0.85 °C respectively. The WSHP’s dynamic behavioral characteristics and performance are also captured, and correspond well with the authors’ previous understanding of heat pump efficiency as a function of evaporator and condenser fluid inlet conditions respectively.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2017

Fatal youth of the Universe: black hole threat for the electroweak vacuum during preheating

Small evaporating black holes were proposed to be dangerous inducing fast decay of the electroweak false vacuum. We observe that the flat-spectrum matter perturbations growing at the post-inflationary matter dominated stage can produce such black holes in a tiny amount which may nevertheless be sufficient to destroy the vacuum in the visible part of the Universe via the induced process. If the decay probability in the vicinity of Planck-mass black holes was of order one as suggested in literature, the absence of such objects in the early Universe would put severe constraints on inflation and subsequent stages thus excluding many well-motivated models (e.g. the R {sup 2}-inflation) and supporting the need of new physics in the Higgs sector. We give a qualitative argument, however, that exponential suppression of the probability should persist in the limit of small black hole masses. This suppression relaxes our cosmological constraints, and, if sufficiently strong, may cancel them.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

Role of melt behavior in modifying oxidation distribution using an interface incorporated model in selective laser melting of aluminum-based material

A transient three dimensional model for describing the molten pool dynamics and the response of oxidation film evolution in the selective laser melting of aluminum-based material is proposed. The physical difference in both sides of the scan track, powder-solid transformation and temperature dependent physical properties are taken into account. It shows that the heat energy tends to accumulate in the powder material rather than in the as-fabricated part, leading to the formation of the asymmetrical patterns of the temperature contour and the attendant larger dimensions of the molten pool in the powder phase. As a higher volumetric energy density is applied (≥1300 J/mm{sup 3}), a severe evaporation is produced with the upward direction of velocity vector in the irradiated powder region while a restricted operating temperature is obtained in the as-fabricated part. The velocity vector continuously changes from upward direction to the downward one as the scan speed increases from 100 mm/s to 300 mm/s, promoting the generation of the debris of the oxidation films and the resultant homogeneous distribution state in the matrix. For the applied hatch spacing of 50 μm, a restricted remelting phenomenon of the as-fabricated part is produced with the upward direction of the convection flow, significantly reducing the turbulence of the thermal-capillary convection on the breaking of the oxidation films, and therefore, the connected oxidation films through the neighboring layers are typically formed. The morphology and distribution of the oxidation are experimentally acquired, which are in a good agreement with the results predicted by simulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

An overview of recent physics results from NSTX

Currently, the National Spherical Torus Experiment (NSTX) is being upgraded to operate at twice the toroidal field and plasma current (up to 1 T and 2 MA), with a second, more tangentially aimed neutral beam (NB) for current and rotation control, allowing for pulse lengths up to 5 s. Recent NSTX physics analyses have addressed topics that will allow NSTX-Upgrade to achieve the research goals critical to a Fusion Nuclear Science Facility. These include producing stable, 100% non-inductive operation in high-performance plasmas, assessing plasma-material interface (PMI) solutions to handle the high heat loads expected in the next-step devices and exploring the unique spherical torus (ST) parameter regimes to advance predictive capability. Non-inductive operation and current profile control in NSTX-U will be facilitated by co-axial helicity injection (CHI) as well as radio frequency (RF) and NB heating. CHI studies using NIMROD indicate that the reconnection process is consistent with the 2D Sweet-Parker theory. Full-wave AORSA simulations show that RF power losses in the scrape-off layer (SOL) increase significantly for both NSTX and NSTX-U when the launched waves propagate in the SOL. Moreover, Toroidal Alfven eigenmode avalanches and higher frequency Alfven eigenmodes can affect NB-driven current through energy loss and redistribution of fast ions. The inclusion of rotation and kinetic resonances, which depend on collisionality, is necessary for predicting experimental stability thresholds of fast growing ideal wall and resistive wall modes. Neutral beams and neoclassical toroidal viscosity generated from applied 3D fields can be used as actuators to produce rotation profiles optimized for global stability. DEGAS-2 has been used to study the dependence of gas penetration on SOL temperatures and densities for the MGI system being implemented on the Upgrade for disruption mitigation. PMI studies have focused on the effect of ELMs and 3D fields on plasma detachment and heat flux handling. Simulations indicate that snowflake and impurity seeded radiative divertors are candidates for heat flux mitigation in NSTX-U. Studies of lithium evaporation on graphite surfaces indicate that lithium increases oxygen surface concentrations on graphite, and deuterium-oxygen affinity, which increases deuterium pumping and reduces recycling. In situ and test-stand experiments of lithiated graphite and molybdenum indicate temperature-enhanced sputtering, although that test-stand studies also show the potential for heat flux reduction through lithium vapour shielding. Non-linear gyro kinetic simulations have indicated that ion transport can be enhanced by a shear-flow instability, and that non-local effects are necessary to explain the observed rapid changes in plasma turbulence. Predictive simulations have shown agreement between a microtearing-based reduced transport model and the measured electron temperatures in a microtearing unstable regime. Finally, two Alfven eigenmode-driven fast ion transport models have been developed and successfully benchmarked against NSTX data. Upgrade construction is moving on schedule with initial physics research operation of NSTX-U planned for mid-2015.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

Experiments and Simulation of a Borehole in Salt to Understand Heat, Brine, and Vapor Migration - 19192

Disposition of heat-generating nuclear waste (HGNW) remains a continuing technical and sociopolitical challenge. Numerous concepts for HGNW management have been proposed and examined internationally, including an extensive focus on geologic disposal. One proposed geologic material is salt because of its low permeability and viscoplastic deformation that causes self-repair of damage done to the salt by waste emplacement activities. Evaluating the safety and technical challenges of storing HGNW in a salt repository is an ongoing process involving experiments and supporting numerical simulation. Currently an experiment is underway at the Waste Isolation Pilot Plant (WIPP) to explore how the presence of a heat generating source affects phenomena such as brine migration, vapor transport, and mechanical changes to the bedded salt. A sub-horizontal heated borehole test is in progress in the underground at the WIPP that includes a centrally located 10.2 cm diameter borehole with an adjustable heater surrounded with smaller diameter boreholes instrumented with thermocouples. The central borehole contains an inflatable packer, heating block, brine sampler, and constantly flowing nitrogen gas circulation system. Air-injection tests performed in the central borehole provide pressure measurements that are used to constrain permeability of the system. The steady-state temperatures, as well as the rise and fall of temperature when the heater is cycled on and off, have been measured for up to 60 days. In the borehole, dry nitrogen gas circulation evaporates water and outflows to a desiccant container where water mass is measured daily during the experiment to quantify vapor removal. Although this test is a 'shake-down' for a planned second round of fresh borehole testing, we have gathered a rich dataset. These data allow us to build simulations using the Finite Element Heat and Mass transfer code (FEHM) to evaluate the experimental results, determine field-scale parameters, and identify code improvements to reproduce important physical processes that may not be accounted for at present. A 3-D numerical mesh, built using LaGrit software (lagrit.lanl.gov; Miller et al., 2007), includes increasing resolution around the central borehole. Modeling of the experiment allows for determining the local thermal conductivity and permeability of any damaged bedded salt around the borehole, where damage from drilling may change the permeability, porosity and saturation conditions, by parameter testing and inverse methods. Additionally, assumptions about brine and vapor flow and transport are being tested by comparing measured and simulated results. The combination of experimental data and model results provide additional data to help support the safety case for safe and effective HGNW disposition in bedded salt formations. Initial results from this experiment show that water flow into the borehole is within previous experimental results. Further, we have found that the design of the heater block is restricting energy to flow into the rock salt. Thus, this test has proven useful in design of the next generation experiment where infrared heating may be used to bypass issues caused by air gaps located around the current stainless steel block heater. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2011

Study of near-stability nuclei populated as fission fragments in heavy-ion fusion reactions

Examples are presented to illustrate the power of prompt {gamma}-ray spectroscopy of fission fragments from compound nuclei with A{approx}200 formed in fusion-evaporation reactions in experiments using the Gammasphere Ge-detector array. Complementary methods, such as Coulomb excitation and deep-inelastic processes, are also discussed. In other cases (n,xn{gamma}) reactions on stable isotopes have been used to establish neutron excitation functions for {gamma}-rays using a pulsed 'white'-neutron source, coupled to a high-energy-resolution germanium-detector array. The excitation functions can unambiguously assign {gamma}-rays to a specific reaction product. Results from all these methods bridge the gaps in the systematics of high-spin states between the neutron-deficient and neutron-rich nuclei. Results near shell closures should motivate new shell model calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2010

EXPLORING THE ORIGIN AND FATE OF THE MAGELLANIC STREAM WITH ULTRAVIOLET AND OPTICAL ABSORPTION

We present an analysis of ionization and metal enrichment in the Magellanic Stream (MS), the nearest gaseous tidal stream, using Hubble Space Telescope/STIS and FUSE ultraviolet spectroscopy of two background active galactic nuclei. The targets are NGC 7469, lying directly behind the MS with log N(H I){sub MS} = 18.63 {+-} 0.03(stat) {+-} 0.08(syst), and Mrk 335, lying 24.{sup 0}7 away with log N(H I){sub MS} = 16.67 {+-} 0.05. For NGC 7469, we include optical spectroscopy from VLT/UVES. In both sight lines, the MS is detected in low-ion (O I, C II, C III, Si II, Si III, Al II, Ca II) and high-ion (O VI, C IV, Si IV) absorption. Toward NGC 7469, we measure an MS oxygen abundance [O/H]{sub MS} = [O I/H I] = -1.00 {+-} 0.05(stat) {+-} 0.08(syst), supporting the view that the Stream originates in the Small Magellanic Cloud rather than the Large Magellanic Cloud. We use CLOUDY to model the low-ion phase of the Stream as a photoionized plasma using the observed Si III/Si II and C III/C II ratios. Toward Mrk 335, this yields an ionization parameter between log U = -3.45 and -3.15, a gas density log (n {sub H}/cm{sup -3}) between -2.51 and -2.21, and a hydrogen ionization fraction of 98.9%-99.5%. Toward NGC 7469, we derive sub-solar abundance ratios for [Si/O], [Fe/O], and [Al/O], indicating the presence of dust in the MS. The high-ion column densities are too large to be explained by photoionization, but also cannot be explained by a single-temperature collisional ionization model (equilibrium or non-equilibrium). This suggests that the high-ion plasma is multi-phase, with an Si IV region, a hotter O VI region, and C IV potentially contributing to each. Summing over the low-ion and high-ion phases, we derive conservative lower limits on the ratio N(total H II)/N(H I) of {approx}>19 toward NGC 7469 and {approx}>330 toward Mrk 335, showing that along these two directions the vast majority of the Stream has been ionized. The presence of warm-hot plasma together with the small-scale structure observed at 21 cm provides evidence for an evaporative interaction with the hot Galactic corona. This scenario, predicted by hydrodynamical simulations, suggests that the fate of the MS will be to replenish the Galactic corona with new plasma, rather than to bring neutral fuel to the disk.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

CO-spatial white light and hard X-ray flare footpoints seen above the solar limb

We report analysis of three solar flares that occur within 1° of limb passage, with the goal to investigate the source height of chromospheric footpoints in white light (WL) and hard X-rays (HXR). We find the WL and HXR (≥30 keV) centroids to be largely co-spatial and from similar heights for all events, with altitudes around 800 km above the photosphere or 300–450 km above the limb height. Because of the extreme limb location of the events we study, emissions from such low altitudes are influenced by the opacity of the atmosphere and projection effects. STEREO images reveal that for SOL2012-11-20T12:36 the projection effects are smallest, giving upper limits of the absolute source height above the nominal photosphere for both wavelengths of ∼1000 km. To be compatible with the standard thick target model, these rather low altitudes require very low ambient densities within the flare footpoints, in particular if the HXR-producing electrons are only weakly beamed. That the WL and HXR emissions are co-spatial suggests that the observed WL emission mechanism is directly linked to the energy deposition by flare accelerated electrons. If the WL emission is from low-temperature (⩽10{sup 4} K) plasma as currently thought, the energy deposition by HXR-producing electrons above ∼30 keV seems only to heat chromospheric plasma to such low temperatures. This implies that the energy in flare-accelerated electrons above ∼30 keV is not responsible for chromospheric evaporation of hot (>10{sup 6} K) plasma, but that their energy is lost through radiation in the optical range.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

The Role of Bjerknes and Shortwave Feedbacks in the Tropical Pacific SST Response to Global Warming

Abstract The evolution of tropical sea surface temperatures (SSTs) in response to greenhouse warming is of great societal and scientific interest. Most state‐of‐the‐art climate models predict a mean “El Niño‐like” warming pattern by century‐end, characterized by greater warming over the Pacific cold tongue compared to the western warm pool. However, it is unclear which proposed mechanism dominates in this response. Here, we present partially coupled abrupt CO 2 doubling experiments in which surface wind stress and shortwave heating are overridden to values from a control simulation. Contrary to previous studies, we find that experiments with overriding of surface wind stress exhibit only 58% of the full reduction in east‐west SST contrast. When both surface wind stress and shortwave flux are overridden, only 34% of the full reduction remains, controlled by spatially‐varying evaporative cooling. These results underscore the importance of Bjerknes and shortwave feedbacks in the tropical Pacific SST response to global warming.

Geology↗
DOE OSTI2016

Convective cooling in a pool-type research reactor

A reactor produces heat arising from fission reactions in the nuclear core. In the Missouri University of Science and Technology research reactor (MSTR), this heat is removed by natural convection where the coolant/moderator is demineralised water. Heat energy is transferred from the core into the coolant, and the heated water eventually evaporates from the open pool surface. A secondary cooling system was installed to actively remove excess heat arising from prolonged reactor operations. The nuclear core consists of uranium silicide aluminium dispersion fuel (U{sub 3}Si{sub 2}Al) in the form of rectangular plates. Gaps between the plates allow coolant to pass through and carry away heat. A study was carried out to map out heat flow as well as to predict the system’s performance via STAR-CCM+ simulation. The core was approximated as porous media with porosity of 0.7027. The reactor is rated 200kW and total heat density is approximately 1.07+E7 Wm{sup −3}. An MSTR model consisting of 20% of MSTR’s nuclear core in a third of the reactor pool was developed. At 35% pump capacity, the simulation results for the MSTR model showed that water is drawn out of the pool at a rate 1.28 kg s{sup −1} from the 4” pipe, and predicted pool surface temperature not exceeding 30°C.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗