Search NASA⌕ Search

SEARCH · Search NASA

Results for “Engineering prototypes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Closing the Loop between In Situ Stress Complexity and EGS Fracture Complexity

We present an agent-guided approach to CAD geometry decomposition that automates hex/hybrid meshing with graph neural networks (GNNs) to accelerate next-generation ModSim workflows. Our end-to-end pipeline (i) reduces 3D boundary-representation (B-Rep) models to a 2D chordal axis skeleton (CAT) and then to a 1D bipartite graph of surface and curve nodes, (ii) assigns per node labels as Cubit® WebCut actions, (iii) trains a multi-action GNN under supervised learning, and (iv) predicts five surface-node and three curve-node actions on out-of-distribution test geometries. Each graph node carries geometric, topological, and meshing attributes drawn from the B-Rep “skin” and CAT “skeleton,” with two-way mappings across 3D↔2D↔1D representations to maintain traceability back to 3D CAD. The supervised learning model exhibits stable convergence of the binary cross-entropy loss and achieves 98.7% accuracy on unseen lattice models. To operationalize decision-making, we rank predicted commands by geometric significance and prototyped the agent-guided workflow through the Cubit® Meshing PowerTool GUI. As a stretch goal, we explore reinforcement learning (RL) to reduce or remove label requirements and to learn policies for action sequences that maximize total reward (e.g., size of hex-meshable regions and resulting hex mesh quality). When all-hex meshing is not feasible, the agent assists in producing hybrid meshes—prioritizing hex in critical regions and transitioning to tetrahedral elements (tets) elsewhere—maintaining fidelity while ensuring robustness. The overarching objective is to replace manual, heuristics-based decomposition with data-driven, reproducible automation, cutting meshing turnaround time by orders of magnitude. We anticipate direct impact on simulation workflows through intelligent, scalable decomposition of complex CAD models into hex-meshable subdomains.

42 ENGINEERING↗

Verification and validation of residual stresses in composite structures

Process-induced residual stresses occur in composite structures composed of dissimilar materials. As these residual stresses could result in fracture, their consideration when designing composite parts is necessary. However, the experimental determination of residual stresses in prototype parts can be time and cost prohibitive. Alternatively, it is possible for computational tools to predict potential residual stresses. Therefore, the objectives of the presented work are to demonstrate an efficient method for simulating residual stresses in composite parts, as well as the potential value of statistical methods during analyses for which material properties are unknown. Specifically, a simplified residual stress modeling approach is implemented within Sandia National Laboratories’ SIERRA/SolidMechanics code. Concurrent with the model development, bi-material composite structures are designed and manufactured to exhibit significant residual stresses. Then, the presented modeling approach is rigorously verified and validated through simulations of the bi-material composite structures’ manufacturing processes, including a mesh convergence study, sensitivity analysis, and uncertainty quantification. The simulations’ final results show adequate agreement with the experimental measurements, indicating the validity of a simple modeling approach, as well as a necessity for the inclusion of material parameter uncertainty in the final residual stress predictions.

42 ENGINEERING↗

Magnonic interferometric switch for multi-valued logic circuits

We investigated a possible use of the magnonic interferometric switches in multi-valued logic circuits. The switch is a three-terminal device consisting of two spin channels where input, control, and output signals are spin waves. Signal modulation is achieved via the interference between the source and gate spin waves. We report experimental data on a micrometer scale prototype based on the Y 3 Fe 2 (FeO 4 ) 3 structure. The output characteristics are measured at different angles of the bias magnetic field. The On/Off ratio of the prototype exceeds 13 dB at room temperature. Experimental data are complemented by the theoretical analysis and the results of micro magnetic simulations showing spin wave propagation in a micrometer size magnetic junction. Here, we also present the results of numerical modeling illustrating the operation of a nanometer-size switch consisting of just 20 spins in the source-drain channel. The utilization of spin wave interference as a switching mechanism makes it possible to build nanometer-scale logic gates, and minimize energy per operation, which is limited only by the noise margin. The utilization of phase in addition to amplitude for information encoding offers an innovative route towards multi-state logic circuits. We describe possible implementation of the three-value logic circuits based on the magnonic interferometric switches. The advantages and shortcomings inherent in interferometric switches are also discussed.

42 ENGINEERING↗

First Annual Report on Development of Microwave Resonant Cavity Transducer for Fluid Flow Sensing: Development of Sensor Performance Model of Microwave Cavity Flow Meter for Advanced Reactor High Temperature Fluids

We are investigating a microwave cavity-based transducer for in-core high-temperature fluid flow sensing in molten salt cooled reactors (MSCR) and sodium fast reactors (SFR). This sensor is a hollow metallic cylindrical cavity, which can be fabricated from stainless steel, and as such is expected to be resilient to radiation, high temperature and corrosive environment of MSCR and SFR. The principle of sensing consists of making one wall of the cylindrical cavity flexible enough so that dynamic pressure, which is proportional to fluid velocity, will cause membrane deflection. Membrane deflection causes cavity volume change, which leads to a shift in the resonant frequency. Feasibility of the sensor was initially investigated with analytical derivations and with COMSOL RF Module computer simulations of resonant frequency spectral shift due to uniform load. We also investigated the mechanical integrity of the flowmeter’s membrane through analytical modelling and COMSOL Structural Mechanics Module computer simulations. Both the analytic model and COMSOL model showed that maximum stresses on the plate, which are at the radial boundary of the plate, are three orders of magnitude smaller than the material’s yield strength and ultimate tensile strength. This indicates that the sensor is at a low risk of mechanical failure. Using results from models, we have developed an initial design for a microwave K-band sensor. A cylindrical resonator prototype was fabricated from brass for the initial tests. The external dimensions of the cavity are matched to the flange of a standard WR-42 waveguide. Microwave field is coupled into the resonant cavity through a subwavelength-size aperture. A test article was developed consisting of a piping Tee with a bulkhead WR-42 microwave waveguide installed in a leak-proof assembly. A microwave waveguide circulator was installed in the setup to suppress the effect of reflections at the cavity entrance by increasing the isolation between the input and the output port. Preliminary spectral characterization of cavity spectral response was performed with a portable PXIe chassis microwave VNA with a custom GUI. Preliminary dry tests of the transducer response were conducted with a set of calibrated weights. Transducer frequency shift was shown to be monotonically increasing with increasing pressure. The next steps will involve investigation of the transducer performance for water flow sensing.

42 ENGINEERING↗

Low power implementation of high frequency SiPM readout for Cherenkov and scintillation detectors in TOF-PET

State-of-the-art (SoA) electronic readout for silicon photomultiplier (SiPM)-based scintillation detectors that demonstrate experimental limits in achievable coincidence time resolution (CTR) leverage low noise, high frequency signal processing to facilitate a single photon time response that is near the limit of the SiPMs architecture. This readout strategy can optimally exploit fast luminescence and prompt photon populations, and promising measurements show detector concepts employing this readout can greatly advance PET detector CTR, relative to SoA in clinical systems. However, the technique employs power hungry components which make the electronics chain impractical for channel-dense time-of-flight (TOF)-PET detectors. We have developed and tested a low noise and high frequency readout circuit which is performant at low power and consists of discrete elements with small footprints, making it feasible for integration into TOF-PET detector prototypes. A 3 × 3 mm 2 Broadcom SiPM with this readout chain exhibited sub-100 ps single photon time resolution at 10 mW of power consumption, with a relatively minor performance degradation to 120 ± 2 ps FWHM at 5 mW. CTR measurements with 3 × 3 × 20 mm 3 LYSO and fast LGSO scintillators demonstrated 127 ± 3 ps and 113 ± 2 ps FWHM at optimal power operation and 133 ± 2 ps and 121 ± 3 ps CTR at 5 mW. BGO crystals 3 × 3 × 20 mm 3 in size show 271 ± 5 ps FWHM CTR (1174 ± 14 ps full-width-at-tenth-maximum (FWTM)) at optimal power dissipation and 289 ± 8 ps (1296 ± 33 ps FWTM) at 5 mW. The compact and low power readout topology that achieves this performance thereby offers a platform to greatly advance PET system CTR and also opportunities to provide high performance TOF-PET at reduced material cost.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Rapid Prototyping for Nanoparticle-Based Photonic Crystal Fiber Sensors

The advent of nanotechnology has motivated a revolution in the development of miniaturized sensors. Such sensors can be used for radiation detection, temperature sensing, radio-frequency sensing, strain sensing, and more. At the nanoscale, integrating the materials of interest into sensing platforms can be a common issue. One promising platform is photonic crystal fibers, which can draw in optically sensitive nanoparticles or have its optical properties changed by specialized nanomaterials. However, testing these sensors at scale is limited by the the need for specialized equipment to integrate these photonic crystal fibers into optical fiber systems. Having a method to enable rapid prototyping of new nanoparticle-based sensors in photonic crystal fibers would open up the field to a wider range of laboratories that could not have initially studied these materials in such a way before. This manuscript discusses the improved processes for cleaving, drawing, and rapidly integrating nanoparticle-based photonic crystal fibers into optical system setups. The method proposed in this manuscript achieved the following innovations: cleaving at a quality needed for nanoparticle integration could be done more reliably (≈100% acceptable cleaving yield versus ≈50% conventionally), nanoparticles could be drawn at scale through photonic crystal fibers in a safe manner (a method to draw multiple photonic crystal fibers at scale versus one fiber at a time), and the new photonic crystal fiber mount was able to be finely adjusted when increasing the optical coupling before inserting it into an optical system (before, expensive fusion splicing was the only other method).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Big Area Additive Manufacturing Application in Wind Turbine Molds

Tooling is a primary target for current additive manufacturing (AM), or 3D printing, technology because of its rapid prototyping capabilities. Molds of many sizes and shapes have been produced for a variety of industries. However, large tooling remained out of reach until the development of large-scale composite AM manufacturing processes like the Big Area Additive Manufacturing (BAAM) system. The Department of Energy's Oak Ridge National Laboratory (ORNL) worked with TPI Composites to use the BAAM system to fabricate a wind turbine blade mold. The fabricated wind turbine blade mold was produced in 16 additively manufactured sections, was 13 meters long, had heating channels integrated into the design, and was mounted into a steel frame post fabrication. This research effort serves as a case study to examine the technological impacts of AM on wind turbine blade tooling and evaluate the efficacy of this approach in utility scale wind turbine manufacturing.

17 WIND ENERGY↗

Demonstration of Isothermal Compressed Air Energy Storage to Support Renewable Energy Production

This project develops and demonstrates a megawatt (MW)-scale Energy Storage System that employs compressed air as the storage medium. An isothermal compressed air energy storage (ICAES TM ) system rated for 1 MW or more will be demonstrated in a full-scale prototype unit. Breakthrough cost-effectiveness will be achieved through the use of proprietary methods for isothermal gas cycling and staged gas expansion implemented using industrially mature, readily-available components.The ICAES approach uses an electrically driven mechanical system to raise air to high pressure for storage in low-cost pressure vessels, pipeline, or lined-rock cavern (LRC). This air is later expanded through the same mechanical system to drive the electric motor as a generator. The approach incorporates two key efficiency-enhancing innovations: (1) isothermal (constant temperature) gas cycling, which is achieved by mixing liquid with air (via spray or foam) to exchange heat with air undergoing compression or expansion; and (2) a novel, staged gas-expansion scheme that allows the drivetrain to operate at constant power while still allowing the stored gas to work over its entire pressure range. The ICAES system will be scalable, non-toxic, and cost-effective, making it suitable for firming renewables and for other grid applications.

25 ENERGY STORAGE↗

Test Plan for the Boiling Water Reactor Dry Cask Simulator

The thermal performance of commercial nuclear spent fuel dry storage casks are evaluated through detailed numerical analysis . These modeling efforts are completed by the vendor to demonstrate performance and regulatory compliance. The calculations are then independently verified by the Nuclear Regulatory Commission (NRC). Carefully measured data sets generated from testing of full sized casks or smaller cask analogs are widely recognized as vital for validating these models. Recent advances in dry storage cask designs have significantly increased the maximum thermal load allowed in a cask in part by increasing the efficiency of internal conduction pathways and by increasing the internal convection through greater canister helium pressure. These same vertical, canistered cask systems rely on ventilation between the canister and the overpack to convect heat away from the canister to the environment for both above and below-ground configurations. While several testing programs have been previously conducted, these earlier validation attempts did not capture the effects of elevated helium pressures or accurately portray the external convection of above-ground and below-ground canistered dry cask systems. The purpose of the investigation described in this report is to produce a data set that can be used to test the validity of the assumptions associated with the calculations presently used to determine steady-state cladding temperatures in modern vertical, canistered dry cask systems. The BWR cask simulator (BCS) has been designed in detail for both the above-ground and below-ground venting configurations. The pressure vessel representing the canister has been designed, fabricated, and pressure tested for a maximum allowable pressure (MAWP) rating of 24 bar at 400 deg C. An existing electrically heated but otherwise prototypic BWR Incoloy-clad test assembly is being deployed inside of a representative storage basket and cylindrical pressure vessel that represents the canister. The symmetric single assembly geometry with well-controlled boundary conditions simplifies interpretation of results. Various configurations of outer concentric ducting will be used to mimic conditions for above and below-ground storage configurations of vertical, dry cask systems with canisters. Radial and axial temperature profiles will be measured for a wide range of decay power and helium cask pressures. Of particular interest is the evaluation of the effect of increased helium pressure on allowable heat load and the effect of simulated wind on a simplified below ground vent configuration. While incorporating the best available information, this test plan is subject to changes due to improved understanding from modeling or from as-built deviations to designs. As-built conditions and actual procedures will be documented in the final test report.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

HOLISTIC ENERGY EFFICIENCY ANALYSIS OF ELECTRIFIED OFF-HIGHWAY MATERIAL HANDLER: FROM DRIVE CYCLE CHARACTERIZATION TO POWERTRAIN, HYDRAULIC, AND THERMAL SYSTEM PERFORMANCE

Three complexities surrounding the operation and testing of hybrid electric, heavy-duty nonroad machines have been addressed experimentally and using 1D simulation. Their resolutions have been intertwined with the development of a prototype machine that was proven to reduce fuel consumption in excess of 20%. A real-world drive cycle that leveraged hydraulic cylinder position was developed and utilized to ensure accurate reproduction of hydraulic work between the baseline and hybrid machines, while simultaneously maintaining less than 5% RMS error in position for main load handling functions. The newly developed, machine-specific drive cycle also contributed towards making equivalent comparisons in energy consumption between machine types through composite performance metrics that were extrapolated over a typical shift duration. Lastly, this work addressed thermal management energy consumption, a topic of increasing popularity when discussing electrified vehicles, by proposing a 1.4% energy savings through special mechanization and control of cooling system components.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Experimental evaluation of a prototype hybrid CPV/T system utilizing a nanoparticle fluid absorber at elevated temperatures

Novel approaches for solar energy conversion continue to garner interest as a potential thermal and electrical energy source. Additionally, the need for systems capable of producing thermal energy at temperatures up to 300 °C is growing as a means to provide process heat to industry and distributed generation for small communities. An approach that has seen recent increased interest is the hybrid concentrating photovoltaic/thermal collector that can co-produce electricity and heat energy above 100 °C. A technique for this is to use nanoparticles in the heat transfer fluid to spectrally filter off wavelengths poorly utilized by the photovoltaic component. Here, we have demonstrated the first on-sun operation of a nanoparticle based hybrid CPV/T solar collector at temperatures exceeding 100 °C using a combination of gold and indium tin oxide nanoparticles in Duratherm S flowing in the receiver, with an aperture area a full order of magnitude larger than other tests. At 14× concentration the system achieved a photovoltaic efficiency of 4% while achieving a peak thermal efficiency of 61% with an outlet temperature of the fluid of 110 °C.

14 SOLAR ENERGY↗

Architecture, implementation, and testing of a multiple-shell gas injection system for high current implosions on the Z accelerator

Tests are ongoing to conduct {approx}20 MA z-pinch implosions on the Z accelerator at Sandia National Laboratory using Ar, Kr, and D{sub 2} gas puffs as the imploding loads. The relatively high cost of operations on a machine of this scale imposes stringent requirements on the functionality, reliability, and safety of gas puff hardware. Here we describe the development of a prototype gas puff system including the multiple-shell nozzles, electromagnetic drivers for each nozzle's valve, a UV pre-ionizer, and an inductive isolator to isolate the {approx}2.4 MV machine voltage pulse present at the gas load from the necessary electrical and fluid connections made to the puff system from outside the Z vacuum chamber. This paper shows how the assembly couples to the overall Z system and presents data taken to validate the functionality of the overall system.

42 ENGINEERING↗

Multi-Scale Modeling and Prototype Development for Electrochemical CO2 Reduction (CRADA Final Report)

In this CRADA project, Lawrence Livermore National Laboratory, Stanford University, SLAC National Laboratory, and TotalEnergies collaboratively executed a multidisciplinary investigation of electrochemical reduction of CO2 to produce sustainable fuels and chemicals. Overall, the project led to an increased understanding of the fundamental processes involved in CO2 electrolysis, from the atomistic scale to the full electrolyzer device scale, ultimately leading to design guidelines for CO2 electrolyzers that will help in their future commercialization. As the model systems, Ag- and Cu-based catalysts were investigated in various forms depending on the electrochemical platform that was utilized to study the activity, selectivity, and durability towards electrochemical CO2 reduction. By employing experimental, theoretical, and computational techniques, the project team experimentally validated multi-physics models, evaluated the experimental levers that lead to increased electrolyzer reaction selectivity and energy efficiency, and used computational optimization to design higher performance electrodes. The learnings of this project were extensively documented in publicly available peer-reviewed journal publications and conference presentations, which serve as a foundation for further work to build from.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Shock-induced kinetics and cellular structures of liquid nitromethane detonation

Using a combination of high-speed diagnostics, optical pyrometry, velocimetry and video photography, we examine the spatiotemporal reaction kinetics of a prototypical high-energy explosive, liquid nitromethane (NM), as we drive this high explosive into detonation. The detonations were initiated by powerful shock waves whose durations (4 ns) were shorter than the characteristic time associated with the reaction (7 ns). Simple optical spectroscopy alone cannot characterize the kinetics with high time resolution because the reactants and products are flowing at a high velocity of ~6 km/s (6 µm/ns). Additionally, every detection volume behind the shock front contains material initiated over a range of times. High spatial resolution can be obtained by probing interfaces where the shock enters or breaks out of the NM. In addition, we obtain cellular patterns imprinted on the luminous shock front by the two-stage explosion in NM. These spatiotemporal patterns arise naturally as a result of the asymmetry produced by the moving shock front. In this way the shock front serves as a thin moving intrinsic optical gauge that reports and characterizes the two-stage NM explosion behind the front.

42 ENGINEERING↗

ASTRID sodium cooled fast reactor: Program for improving in service inspection and repair

In the frame of the CEA, EDF, AREVA coordinated research program for the development of Generation IV sodium-cooled fast reactors (SFR), the ASTRID project was launched in 2010. For the future prototype, the improvement of in-service inspection and repair (ISI and R) capabilities was identified as a major issue. Following the pluri-annual SFR research program, the ISI and R main R and D axes remain: i) improvement of the primary system conceptual design, ii) development of measurement and inspection techniques (continuous monitoring instrumentation and periodic inspection tools), iii) accessibility and associated robotics, and iv) development and validation of repair processes. Associated ISI and R needs are being defined through an iterative method between designers and instrumentation specialists: adaptation of the Design to ISI and R requirements, fission chamber development, validation of the ultrasonic and chemical transducers, of ultrasonic non destructive simulation, of acoustic surveillance, of laser repair intervention processes, of connected robotic equipment. Moreover, CEA, as leader of the ASTRID Project, is willing to find new contributors, partners or suppliers, in order to get innovative, diversified, exhaustive and efficient solutions. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

CFD Study of Countercurrent Flow in Triply Periodic Minimal Surfaces with CO 2 BOL Solvent

Triply periodic minimal surfaces (TPMS) are promising structures for heat exchangers and ultrafiltration due to their high heat and mass transfer efficiency compared to traditional devices. Because of this, the TPMS structures are a potential candidate for building the multifunctional, intensified devices in CO 2 capture tasks. With the Lawrence Livermore National Laboratory’s (LLNL’s) additive manufacturing (AM) capability, these complicated TPMS structures can be printed in the packed column for experimental tests. To optimize the TPMS structure and enable fast prototyping, a computationally-efficient computational fluid dynamics (CFD) framework was established to explore the TPMS structure’s hydrodynamics and mass transfer performance. The established model was able to simulate the countercurrent flows by integrating the Pacific Northwest National Laboratory (PNNL) CO 2 binding organic liquids (CO 2 BOL) solvent into the TPMS structures. Three typical TPMS structures - namely, Gyroid, Schwarz-D, and Schwarz-P - were investigated using the periodic boundary set up in all three directions. Two different unit cell size (1 cm and 2 cm) geometries are tested for each type of TPMS. The solvent flow rate in this study covered a range of [0, 0.1] m/s with an initial liquid film thickness of [0.1, 1.8] mm. These simulations provided a preliminary understanding of the TPMS structure behaviors in countercurrent flow conditions. The study also related the TPMS geometry requirement to the given CO 2 BOL solvent physical property and covered reasonable packed column operation ranges.

36 MATERIALS SCIENCE↗

Oxygen vacancy formation energies in PbTiO 3 / SrTiO 3 superlattice

The defect stability in a prototypical perovskite oxide superlattice consisting of ${\mathrm{SrTiO}}_{3}$ and ${\mathrm{PbTiO}}_{3}$ (STO/PTO) is determined by using first principles density functional theory calculations. Specifically, the oxygen vacancy formation energies ${E}_{\mathrm{v}}$ in the paraelectric and ferroelectric phases of a superlattice with four atomic layers of STO and four layers of PTO (4STO/4PTO) are determined and compared. The effects of charge state, octahedral rotation, polarization, and interfaces on ${E}_{\mathrm{v}}$ are examined in this paper. The formation energies vary layer by layer in the superlattices, with ${E}_{\mathrm{v}}$ being higher in the ferroelectric phase than that in the paraelectric phase. The two interfaces constructed in these oxide superlattices, which are symmetrically equivalent in the paraelectric systems, exhibit very different formation energies in the ferroelectric superlattices and this can be seen to be driven by the coupling of ferroelectric and rotational modes. At equivalent lattice sites, ${E}_{\mathrm{v}}$ of charged vacancies is generally lower than that of neutral vacancies. Octahedral rotations $({\mathrm{a}}^{0}{\mathrm{a}}^{0}{\mathrm{c}}^{{-}})$ in the superlattices have a significant effect on ${E}_{\mathrm{v}}$, increasing the formation energy of vacancies located near the interface but decreasing the formation energy of the oxygen vacancies located in the bulk-like regions of the STO and PTO constituent parts. The formation-energy variations among different layers are found to be primarily caused by the difference in the local relaxation at each layer. Finally, these fundamental insights into the defect stability in perovskite superlattices can be used to tune defect properties by controlling the constituent materials of superlattices and interface engineering.

36 MATERIALS SCIENCE↗