Search NASA⌕ Search

SEARCH · Search NASA

Results for “File System”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Comparison of active interrogation methods for source location in a scattering and absorbing medium, consisting of PGNAA, and an AmBe quasi-forward biased directional source

Source location of Special Nuclear Material (SNM) encompassing 95% 235 U and 239 Pu is identified by utilizing a directional source from Patent No: US20190013109A1 using Prompt Gamma Neutron Activation Analysis (PGNAA) and neutron spectroscopy simulated with Monte-Carlo N-Particle transport 6.2 (MCNP). BC-408, HPGe, LaBr 3 detector arrays were used to identify the location of the SNM using total counts incident on each detector, and PGNAA photopeaks from HPGe and LaBr 3 detector arrays in a polyethylene shield. The conducted simulations varied the volume and location of the SNM in the MCNP input files to observe how the source location method behaved. PGNAA photopeaks used for source identification include 61 keV from fission, 2.223 MeV prompt gamma from hydrogen, 511 keV annihilation, and a single and double escape peaks from the prompt gamma interaction from hydrogen. The capabilities of each detector systems to acquire well resolved photopeaks with a 1% relative error or less, and total relative error for F4 and F8 tallies were less than 0.015% relative error. Source predictions of the SNM with uneven amounts of polyethylene shielding between the source and detectors was observed to overpredict and give invalid source location predictions. Source locations of the SNM with even amounts of polyethylene material between the source and each detector were found to be valid. With a 1 Ci 241 Am source activity, it was determined that 1630 s were needed to obtain the results for each detector system with the quasi-forward directional AmBe source. Coupling source and material identification together would increase acquisition time but would only require one system to determine.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Pellet-clad mechanical interaction screening using VERA applied to Watts Bar Unit 1, Cycles 1–3

The Consortium for Advanced Simulation of Light Water Reactors (CASL) aims to provide high-fidelity multiphysics simulations of light water nuclear reactors. To accomplish this, CASL is developing the Virtual Environment for Reactor Applications (VERA), which is a suite of code packages for thermal hydraulics, neutron transport, fuel performance, and coolant chemistry. As VERA continues to grow and expand, there has been an increased focus on incorporating fuel performance analysis methods. One of the primary goals of CASL is to estimate local cladding failure probability through pellet-clad interaction, which consists of both pellet-clad mechanical interaction (PCMI) and stress corrosion cracking. Estimating clad failure is important to preventing release of fission products to the primary system and accurate estimates could prove useful in establishing less conservative power ramp rates or when considering load-follow operations.While this capability is being pursued through several different approaches, the procedure presented in this article focuses on running independent fuel performance calculations with BISON using a file-based one-way coupling based on multicycle output data from high fidelity, pin-resolved coupled neutron transport–thermal hydraulics simulations. This type of approach is consistent with traditional fuel performance analysis methods, which are typically separate from core simulation analyses. A more tightly coupled approach is currently being developed, which is the ultimate target application in CASL.Recent work simulating 12 cycles of Watts Bar Unit 1 with VERA core simulator are capitalized upon, and quarter-core BISON results for parameters of interest to PCMI (maximum centerline fuel temperature, maximum clad hoop stress, and minimum gap size) are presented for Cycles 1–3. In conclusion, based on these results, this capability demonstrates its value and how it could be used as a screening tool for gathering insight into PCMI, singling out limiting rods for further, more detailed analysis.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Proposed crystal structure of carbadox, C 11 H 10 N 4 O 4

A model for the crystal structure of carbadox has been generated and refined using synchrotron X-ray powder diffraction data and optimized using density functional theory techniques. Carbadox crystallizes in space groupP2 1 (#4) witha= 13.8155(3),b= 21.4662(1),c= 16.3297(3) Å,β= 110.0931(7)°,V= 4548.10(3) Å 3 , andZ= 16. The crystal structure is characterized by approximately parallel stacking of the eight independent carbadox molecules parallel to thebc-plane. There are two different molecular configurations of the eight carbadox molecules; five are in the lower-energy configuration and three are in a ~10% higher-energy configuration. This arrangement likely achieves the lowest-energy crystalline packing via hydrogen bonding. Hydrogen bonds link the molecules both within and between the planes. Each of the amino groups forms a N–H⋯O hydrogen bond to an oxygen atom of the 1,4-dioxidoquinoxaline ring system of another molecule. The result is four pairs of hydrogen-bonded molecules, which form rings with graph setR2,2(14). Variation in specimen preparation can affect the preferred orientation of particles considerably. The powder pattern has been submitted to ICDD for inclusion in the Powder Diffraction File™ (PDF®).

Materials Science↗
DOE OSTI2026

ExaGO v2

ExaGO is a high-performance computing power systems modeling suite providing models for different power flow analyses. It supports forward AC power flow, multiperiod AC and DC optimal power flow analyses, contingency analysis, as well as stochastic optimal power flow analysis. ExaGO can use HiOp and Ipopt optimization engines. It supports Matpower and PSS/E input file formats. ExaGO v2 includes code from ExaGO 1.6.0.

Peles, Slaven [Oak Ridge National Laboratory (ORNL↗
DOE OSTI2024

Maps of land surface phenology derived from PlanetScope data, 2018-2022, Teller, Kougarok, and Council, Seward Peninsula

Remote sensing maps of land surface phenology derived from PlanetScope (Planet Team, 2017) normalized differential greenness index (NDGI; Yang et al., 2019) time series data. These maps include four phenological timing metric - start of spring (SOS), end of spring (EOS), start of fall (SOF), and end of fall (EOF), corresponding NDGI value at the four phenological timings, and annual maximum and minimum NDGI. This package includes maps for Next-Generation Ecosystem Experiment Arctic (NGEE Arctic)’s Teller Mile Marker (MM) 27, Kougarok MM64, and Council MM 71 watersheds. Maps of 5 years from 2018 to 2022 are included in this dataset. The map data and metadata are provided as image (ENVI) and text (*.txt, *hdr) formats. Additional supporting map quicklooks are provided as GIS *.kml files. These datasets are provided in support of Yang et al., (In revision) “Fine-scale Landscape Characteristics, Vegetation Composition, and Snowmelt Timing Control Phenological Heterogeneity across Arctic Tundra Landscapes”The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

MOVES Activity Updates Using Fleet DNA Data: Interim Report

The U.S. Environmental Protection Agency's Motor Vehicle Emissions Simulator (MOVES) is a publicly available tool used by researchers and policy makers to help understand motor vehicle emission sources at national, county, and project levels. However, estimates of heavy-duty activity (MOVES2014), have been identified as areas needing improvement. The start activities in MOVES2014 are calculated using a limited data set, prompting the concern that inventory values are not representative. In addition, MOVES2014 is believed to underestimate heavy-duty activity that is not captured in the current drive cycles used to represent on-network activity. For example, MOVES2014 does not account for work-day idling activity that takes place on off-network roads, such as at a distribution center while the truck is queuing or during loading and unloading. Under the guidance and expertise of the EPA, the National Renewable Energy Laboratory has leveraged its extensive Fleet DNA database of heavy-duty vehicles to reinforce the data set behind the next-generation MOVES model and enhance idle activity and start fractions using six heavy-duty vehicle classes. The data available in Fleet DNA from 420 conventional, diesel powered vehicles provided over 120,000 hours of operation. Start fraction, soak fraction, and idle fraction by hour of the day were derived for each source type, state, and vocation, and results were provided in the form of .CSV files representing MOVES table inputs. This midterm report details these results providing graphical analysis and context for the start, soak, and idle distributions.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

Concentration-Discharge Relationships in the Six Largest Arctic Rivers, 2003-2019

This dataset provides the results of the analysis of the relationship of dissolved analyte concentrations and river discharges in the six largest Arctic rivers across the global panarctic region (see Figure 1 in documentation file *.pdf). Long-term measurements of dissolved analyte concentrations and river discharge have been collected for each of the Kolyma, Lena, Mackenzie, Ob, Yenisey, and Yukon rivers by the Arctic Great Rivers Observatory (ArcticGRO) project from ~2003-present (Shiklomanov, 2021). The relationship of dissolved analyte concentrations and discharges in each river was characterized by statistical analysis of the slope of the log(concentration) vs log(discharge) (b), the coefficient of variation ratio (CVc/CVq), the 2.5% and 97.5% confidence intervals of b, and assigning a chemostatic, flushing, diluting, or non-systematic behavior category according to Koger (2018). The summary of these analyses for all six rivers is provided in one .csv file. The concentrations of 20 dissolved analytes and discharge measurement data for the individual Kolyma, Lena, Mackenzie, Ob, Yenisey, and Yukon rivers are also provided with this dataset. There are seven *.csv files; one for each river plus the statistical summary. These public ArcticGRO data at "https://www.arcticgreatrivers.org" (Shiklomanov, 2021) were downloaded on Feb 13, 2020, but each river has different measurement dates over the sampling and analysis period. The ArcticGRO metadata document (*.pdf) downloaded on Feb 13, 2020 is also included in this dataset. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

CHESS 2025: Waveform LiDAR data from NEON AOP surveys

This dataset provides Level 1 (L1) full-waveform light detection and ranging (LiDAR) data collected for the 2025 Colorado Headwaters Ecological Spectroscopy Study (CHESS). These data were acquired to enable characterization of vegetation structure and other three-dimensional features of the land surface, and to evaluate structural changes that may have occurred between a prior LiDAR acquisition in 2018 and the 2025 overflight. Waveform LiDAR data can provide more detailed information about objects on the ground than discrete point clouds typically do, and they are often used for granular target segmentation and characterization of subcanopy vegetation. The data were acquired over three study domains in the Upper Gunnison river basin: the upper East River watershed (CRBU); Almont Triangle and Taylor Canyon (ALMO); and Upper Taylor River watershed (UPTA) between 2025-06-13 and 2025-07-15. LiDAR data were acquired using the Optech Galaxy Prime Airborne LiDAR Terrain Mapper onboard the National Ecological Observatory Network (NEON) Airborne Observation Platform (AOP). These are the primary waveform LiDAR data delivered by NEON and are provided per flightline in compressed Pulsewaves format, an open-source binary file standard. A Pulsewaves object comprises a two files: a pulse (.pls) file, which stores the geographic origin, outgoing vector, and metadata for every laser pulse emitted by the scanner, and a wave file (.wvs), which stores the sequential amplitude samples of the outgoing pulse and the returning signals. The files are published here in their compressed forms (.plz, .wvz). All waveform data were processed following the theoretical workflow described in the NEON L0-to-L1 Waveform LiDAR Algorithm Theoretical Basis Document (Krause and Goulden 2022a); however, the Pulsewaves output format differs from a legacy format described in that document. Waveform amplitude samples are recorded at 1 nanosecond intervals. All coordinates are provided in meters. Horizontal coordinates are referenced in Universal Transverse Mercator (UTM) zone 13N and the World Geodetic System (WGS) 1984 ensemble datum. Elevations are referenced to Geoid12A. Waveform data for the UPTA survey area were collected without incident and the published records are complete. However, both the ALMO and CRBU collections experienced issues that resulted in incomplete data for those areas. On collection day 2018-06-16 a hardware failure caused the waveform digitizer to lose data from the eastern edge of the ALMO site (Figure 22). The waveform data for flightlines 2–20 could not be extracted from the digitizer, and the data proved unrecoverable. As a result, a portion of the site does not have coverage with waveform data. Although no hardware failure was observed during collection over the CRBU area, final waveform files generated by vendor software contained only ~25% of the expected number of return pulses. After discovery, NEON initiated troubleshooting with the vendor. The root cause of the data ablation had not been identified at the time of publication. Additional data will be published in an update to this package if further recovery proves successful. CHESS Project Description: The Colorado Headwaters Ecological Spectroscopy Study (CHESS) comprised a multi-week airborne remote sensing and field observation campaign in the Upper Gunnison Basin, Colorado, conducted in June and July of 2025. Airborne remote sensing was conducted by the National Ecological Observatory Network Airborne Observation Platform (NEON AOP), concurrent with a field campaign run by the Rocky Mountain Biological Laboratory (RMBL), the Lawrence Berkeley National Laboratory (LBNL) and SLAC National Accelerator Laboratory Watershed Function Science Focus Area (SFA), and NASA-JPL (Jet Propulsion Laboratory) Earth Surface Mineral Dust Source Investigation (EMIT) program. Between June 10 and July 18, 2025, the NEON AOP flight team collected high-resolution aerial imaging spectroscopy and Light Detection and Ranging (LiDAR) data over three domains: the Upper East River (CRBU), Almont Triangle (ALMO), and the Upper Taylor Basin (UPTA). In coordination with the flights, a field campaign acquired ground-truth observations, including observations of vegetation composition, foliar traits, forest demography, and subsurface properties in 18 core sampling areas within the domains. Additional surface water observations were taken at over 380 point locations. All CHESS campaign datasets can be found within the CHESS ESS-DIVE data portal: https://data.ess-dive.lbl.gov/portals/chess. Funding Acknowledgement: Field and remote-sensing data acquisition was performed under a grant from the National Aeronautics and Space Administration (80NSSC24K1005). This work was also supported by the Watershed Function Science Focus Area at Lawrence Berkeley National Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-05CH11231.

2018 NEON and 2025 CHESS Campaigns↗
DOE OSTI2018

PoroTomo: Horizontal Distributed Acoustic Sensing (DAS) Measurements During an M 2.3 Explosion

Included here are Distributed Acoustic Sensing (DAS) data collected by the horizontal DAS array at Brady's Hot Springs Geothermal Field. The system recorded this data during an M 2.3 explosion at the Nevada Test Site (NTS), which is located approximately 400km southeast of the field. On December 19, 2018, a Silixa iDAS interrogator continuously acquired data on single-mode fibers, starting approximately two hours prior to the detonation and extending until 15 minutes after the event. This dataset comprises separate SEG-Y files that span the entire recording interval. The measurement fiber was part of the PoroTomo experiment and is horizontally emplaced in alluvial fan gravels at a depth of approximately one meter for a distance of more than 2.5 km in a zig-zag pattern. Exact coordinates of this DAS surface array are provided in the attached GDR dataset below. The iDAS interrogator channel spacing is 1.021 m and gauge length is 10 m. Concurrent Distributed Temperature Sensing (DTS) measurements made with a Silixa XT on the multi-mode fibers aided in calibrating the DAS measurements.

15 GEOTHERMAL ENERGY↗
DOE OSTI2017

dCache on Steroids - Delegated Storage Solutions

For over a decade, dCache.org has delivered a robust software used at more than 80 Universities and research institutes around the world, allowing these sites to provide reliable storage services for the WLCG experiments as well as many other scientific communities. The flexible architecture of dCache allows running it in a wide variety of configurations and platforms - from a SoC based all-in-one Raspberry-Pi up to hundreds of nodes in a multipetabyte installation. Due to lack of managed storage at the time, dCache implemented data placement, replication and data integrity directly. Today, many alternatives are available: S3, GlusterFS, CEPH and others. While such solutions position themselves as scalable storage systems, they cannot be used by many scientific communities out of the box. The absence of community-accepted authentication and authorization mechanisms, the use of product specific protocols and the lack of namespace are some of the reasons that prevent wide-scale adoption of these alternatives. Most of these limitations are already solved by dCache. By delegating low-level storage management functionality to the above-mentioned new systems and providing the missing layer through dCache, we provide a solution which combines the benefits of both worlds - industry standard storage building blocks with the access protocols and authentication required by scientific communities. In this paper, we focus on CEPH, a popular software for clustered storage that supports file, block and object interfaces. CEPH is often used in modern computing centers, for example as a backend to OpenStack services. We will show prototypes of dCache running with a CEPH backend and discuss the benefits and limitations of such an approach. As a result, we will also outline the roadmap for supporting ‘delegated storage’ within the dCache releases.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2016

MO-FG-BRA-01: 4D Monte Carlo Simulations for Verification of Dose Delivered to a Moving Anatomy

Purpose: To validate 4D Monte Carlo (MC) simulations of dose delivery by an Elekta Agility linear accelerator to a moving phantom. Methods: Monte Carlo simulations were performed using the 4DdefDOSXYZnrc/EGSnrc user code which samples a new geometry for each incident particle and calculates the dose in a continuously moving anatomy. A Quasar respiratory motion phantom with a lung insert containing a 3 cm diameter tumor was used for dose measurements on an Elekta Agility linac with the phantom in stationary and moving states. Dose to the center of tumor was measured using calibrated EBT3 film and the RADPOS 4D dosimetry system. A VMAT plan covering the tumor was created on the static CT scan of the phantom using Monaco V.5.10.02. A validated BEAMnrc model of our Elekta Agility linac was used for Monte Carlo simulations on stationary and moving anatomies. To compare the planned and delivered doses, linac log files recorded during measurements were used for the simulations. For 4D simulations, deformation vectors that modeled the rigid translation of the lung insert were generated as input to the 4DdefDOSXYZnrc code as well as the phantom motion trace recorded with RADPOS during the measurements. Results: Monte Carlo simulations and film measurements were found to agree within 2mm/2% for 97.7% of points in the film in the static phantom and 95.5% in the moving phantom. Dose values based on film and RADPOS measurements are within 2% of each other and within 2σ of experimental uncertainties with respect to simulations. Conclusion: Our 4D Monte Carlo simulation using the defDOSXYZnrc code accurately calculates dose delivered to a moving anatomy. Future work will focus on more investigation of VMAT delivery on a moving phantom to improve the agreement between simulation and measurements, as well as establishing the accuracy of our method in a deforming anatomy. This work was supported by the Ontario Consortium of Adaptive Interventions in Radiation Oncology (OCAIRO), funded by the Ontario Research Fund Research Excellence program.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Community Geothermal: Borefield Design, Thermal Conductivity, and Subsurface Modeling Data - Chicago, IL

This dataset encompasses the development of a geothermal energy system for the West Woodlawn neighborhood in Chicago, Illinois. This project is part of a broader initiative to design and deploy geothermal heating and cooling systems at a community scale. The dataset includes thermal conductivity test results, calculations for borehole sizing based on the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) method, as well as simulated thermal loads based on actual energy usage from individual buildings. Also provided here are files used for numerical modeling via COMSOL Multiphysics to simulate borefield design and subsurface thermal behavior. Two manuscripts are attached, which outline the broad objectives of the project and a description of the numerical modeling methodology and results.

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

Model Inputs, Outputs, and Scripts associated with: “Spatial microbial respiration variations in the hyporheic zones within the Columbia River Basin”

This data package is associated with the publication “Spatial microbial respiration variations in the hyporheic zones within the Columbia River Basin” published in the Journal of Geophysical Research: Biogeosciences (Son et al. 2022) available at doi: 10.1029/2021JG006654. This data package includes the key model inputs/outputs of the river corridor model for the Columbia River Basin (CRB) and the model source codes, which were used in the manuscript. The model is a carbon-nitrogen-coupled river corridor model (RCM), and the model is used to quantify hyporheic zone (HZ) aerobic and anaerobic respiration at the NHDPLUS stream reach scales. The RCM used in this study combines empirical substrate models derived from observations and three microbially driven reactions to compute respiration of the HZ for each National Hydrography Dataset (NHD) reach within the CRB. The reactions in HZs of each NHD reach include anaerobic respiration and two-step anaerobic respiration via denitrification. Our HZ respiration estimates are limited to the lotic (or flowing) stream/river systems, and do not account for the respiration process in water column. Note that the RCM only simulates the HZ’s contribution to the dissolved carbon dioxide (CO2) concentrations in the streams, and the CO2 emissions to the atmosphere are not modelled. The model computes at hourly timesteps because of the fast reaction rates. The key input data of the model are exchange flux, residence time, and stream solute (dissolved organic carbon (DOC), dissolved oxygen (DO), and nitrate concentrations). These inputs are constant over time and represent long-term averaged values.This modeling framework successfully quantified HZ respiration components over multiple scales. It revealed key mechanisms driving the spatial variation of HZ aerobic and anaerobic respiration in reaches with varying hydrologic and substrate conditions. Thus, this modeling study offers a testing hypothesis in different river system (e.g., climate and biomes) for the HZ respiration processes, and can be used as a sampling design tool for large-scale HZ experimental studies.This dataset contains five folders: (1) model_inputs, (2) model_outputs, (3) Rscripts, (4) figures, and (5) model_codes. It also contains a readme, file level metadata (FLMD), and data dictionary (dd). Please see the FLMD for a list of all the files contained in this data package and descriptions for each. The model_inputs folder contains the model inputs used to drive the model simulations. The model_outputs folder contains key model output files from the river corridor model. The Rscripts folder contains the Rscripts for pre- and post- processing model results. The figures folder contains the raw figures associated with the manuscript. The model_codes folder includes key model source codes/input files. All files are .jpg, .jpeg, .out, .e, .od, .dat, .sub, .F90, .0, .R, .sbx, .cpg, .sbn, .shx, .shp, .dbf, .prj, .tfw, .tif, .xml, .pdf, or .csv.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Electrification Futures Study Supply-Side Scenarios Report Figure Data

The file includes the data for figures in the Electrification Futures Study Supply-Side Scenarios report. Additional information on the data can be found in the report: Murphy, Caitlin, Trieu Mai, Yinong Sun, Paige Jadun, Matteo Muratori, Brent Nelson, and Ryan Jones. 2021. Electrification Futures Study: Scenarios of Power System Evolution and Infrastructure Development for the United States. Golden, CO: National Renewable Energy Laboratory. NREL/TP-6A20-72330. https://www.nrel.gov/docs/fy21osti/72330.pdf.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2017

Quinoa, Version 0.2

Quinoa is a set of computational tools that enables research and numerical analysis in fluid dynamics. At this time it remains a test-bed to experiment with various algorithms using fully asynchronous runtime systems. Currently, Quinoa consists of the following tools: (1) Walker, a numerical integrator for systems of stochastic differential equations in time. It is a mathematical tool to analyze and design the behavior of stochastic differential equations. It allows the estimation of arbitrary coupled statistics and probability density functions and is currently used for the design of statistical moment approximations for multiple mixing materials in variable-density turbulence. (2) Inciter, an overdecomposition-aware finite element field solver for partial differential equations using 3D unstructured grids. Inciter is used to research asynchronous mesh-based algorithms and to experiment with coupling asynchronous to bulk-synchronous parallel code. Two planned new features of Inciter, compared to the previous release (LA-CC-16-015), to be implemented in 2017, are (a) a simple Navier-Stokes solver for ideal single-material compressible gases, and (b) solution-adaptive mesh refinement (AMR), which enables dynamically concentrating compute resources to regions with interesting physics. Using the NS-AMR problem we plan to explore how to scale such high-load-imbalance simulations, representative of large production multiphysics codes, to very large problems on very large computers using an asynchronous runtime system. (3) RNGTest, a test harness to subject random number generators to stringent statistical tests enabling quantitative ranking with respect to their quality and computational cost. (4) UnitTest, a unit test harness, running hundreds of tests per second, capable of testing serial, synchronous, and asynchronous functions. (5) MeshConv, a mesh file converter that can be used to convert 3D tetrahedron meshes from and to either of the following formats: Gmsh, http://www.geuz.org/gmsh, Netgen, http://sourceforge.net/apps/mediawiki/netgen-mesher, ExodusII, http://sourceforge.net/projects/exodusii, HyperMesh, http://www.altairhyperworks.com/product/HyperMesh.

Bakosi, Jozsef↗
DOE OSTI2018

PyBioNetFit

Systems biology models written in the BioNetGen language often contain parameters that must be fit based on experimental data. PyBioNetFit is a software tool designed to fit parameters of BioNetGen models. The user is expected to provide a BioNetGen model that contains unknown parameters, along with one or more text files containing experimental data. PyBioNetFit will perform a series of calls to the BioNetGen simulator using different parameter sets, to identify the parameter set that best fits the data. The parameter search is dictated by the user's choice of one of several metaheuristic optimization algorithms, including differential evolution, particle swarm optimization, scatter search, and simulated annealing. The software supports parallelized computing on multi-core computers and on computing clusters. We expect this software to be a useful tool for researchers designing BioNetGen models in collaboration with experimentalists.

Mitra, Eshan↗
DOE OSTI2020

SNL-NJOY-2016

This is a wrapper around the LANL NJOY-2016 code that interfaces with extended code capabilities and minor modification of the LANL NJOY-2016 code that supports modeling radiation damage to materials. The NJOY Nuclear Data Processing System is a modular computer code designed to read evaluated data in ENDF format, transform the data in various ways, and output the results as libraries designed to be used in various applications. The wrapper provided here permits Sandia-specific control parameters to be used in the input data file. The modifications incorporated here enhance the ability of NJOY to address material damage response functions for many materials, e.g. to include the NRT and arc-dpa forms of the damage energy in addition to the default NJOY-2016 implementation of the sharp-threshold Kinchin-Pease threshold energy treatment. All of the modifications provided here are being made available to the GitHub-based NJOY-2016 code. As useful enhancements found here are incorporated into the baseline NJOY-2016 code, they will be eliminated from this version so as to maintain our compatibility with the baseline NJOY-2016 code. SAND2020-13060 M Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA00035

Griffin, Patrick↗
DOE OSTI2022

Design of Critical Experiments Targeting Epithermal Cross Sections of Tantalum

Sandia National Laboratories (SNL) and Oak Ridge National Laboratory (ORNL) are collaborating to develop a capability to test the epithermal/intermediate cross sections of tantalum (Ta) at the SNL critical experiments facility using the Seven Percent Critical Experiment (7uPCX) fuel. The Sandia Critical Experiments (SCX) Program provides a specialized facility for performing water moderated and reflected critical experiments with UO 2 fuel rod arrays. A history of safe reactor operations and flexibility in reactor core configuration has resulted in the completion of several benchmark critical experiment evaluations that are published in the International Criticality Safety Benchmark Evaluation Project (ICSBEP) Handbook. The critical experiments described here are scheduled to be performed at SCX in fiscal year 2023. Currently, fabrication details for the needed new equipment are being finalized for completion of the procurement process. The experiments will then be executed and documented for publication consideration by the ICSBEP.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗