Search NASA⌕ Search

SEARCH · Search NASA

Results for “Forest Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Machine Learning Prediction of the Experimental Transition Temperature of Fe(II) Spin-Crossover Complexes

Spin-crossover (SCO) complexes are materials that exhibit changes in the spin state in response to external stimuli, with potential applications in molecular electronics. It is challenging to know a priori how to design ligands to achieve the delicate balance of entropic and enthalpic contributions needed to tailor a transition temperature close to room temperature. Here, we leverage the SCO complexes from the previously curated SCO-95 data set [Vennelakanti et al. J. Chem. Phys. 159, 024120 (2023)] to train three machine learning (ML) models for transition temperature (T 1/2 ) prediction using graph-based revised autocorrelations as features. We perform feature selection using random forest-ranked recursive feature addition (RF-RFA) to identify the features essential to model transferability. Of the ML models considered, the full feature set RF and recursive feature addition RF models perform best, achieving moderate correlation to experimental T 1/2 values. We then compare ML T 1/2 predictions to those from three previously identified best-performing density functional approximations (DFAs) which accurately predict SCO behavior across SCO-95, finding that the ML models predict T 1/2 more accurately than the best-performing DFAs. In addition, we study ML model predictions for a set of 18 SCO complexes for which only estimated T 1/2 values are available. Upon excluding outliers from this set, the RF-RFA RF model shows a strong correlation to estimated T 1/2 values with a Pearson’s r of 0.82. In contrast, DFA-predicted T 1/2 values have large errors and show no correlation to estimated T 1/2 values over the same set of complexes. Overall, our study demonstrates slightly superior performance of ML models in comparison with some of the best-performing DFAs, and we expect ML models to improve further as larger data sets of SCO complexes are curated and become available for model training.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The quenching of galaxies, bulges, and disks since cosmic noon

Here, we present an analysis of the quenching of star formation in galaxies, bulges, and disks throughout the bulk of cosmic history, from z = 2 – 0. We utilise observations from the Sloan Digital Sky Survey and the Mapping Nearby Galaxies at Apache Point Observatory survey at low redshifts. We complement these data with observations from the Cosmic Assembly Near-Infrared Deep Extragalactic Legacy Survey at high redshifts. Additionally, we compare the observations to detailed predictions from the LGalaxies semi-analytic model. To analyse the data, we developed a machine learning approach utilising a Random Forest classifier. We first demonstrate that this technique is extremely effective at extracting causal insight from highly complex and inter-correlated model data, before applying it to various observational surveys. Our primary observational results are as follows: at all redshifts studied in this work, we find bulge mass to be the most predictive parameter of quenching, out of the photometric parameter set (incorporating bulge mass, disk mass, total stellar mass, and B/T structure). Moreover, we also find bulge mass to be the most predictive parameter of quenching in both bulge and disk structures, treated separately. Hence, intrinsic galaxy quenching must be due to a stable mechanism operating over cosmic time, and the same quenching mechanism must be effective in both bulge and disk regions. Despite the success of bulge mass in predicting quenching, we find that central velocity dispersion is even more predictive (when available in spectroscopic data sets). In comparison to the LGalaxies model, we find that all of these observational results may be consistently explained through quenching via preventative ‘radio-mode’ active galactic nucleus feedback. Furthermore, many alternative quenching mechanisms (including virial shocks, supernova feedback, and morphological stabilisation) are found to be inconsistent with our observational results and those from the literature.

79 ASTRONOMY AND ASTROPHYSICS↗

Incorporating rhizosphere interactions and soil physical properties into a soil carbon degradation model through experimenting across ecotypes (Final Report)

Soil properties and biological communities contribute to carbon loss and gain, which vary significantly by ecosystem, but current carbon cycling models fail to incorporate interactions among these groups. We experimentally manipulated and modeled how mycorrhizal fungi and roots alter carbon dynamics in temperate, tropical, and boreal forests (see Jiang et al. 2017, Moore et al. 2015a, 2015b, in review, Zak et al. 2019, Rewcastle et al. in review). To date, we find that the influence of fungi on carbon dynamics varies by the nutrient constraints of that ecosystem. For example, in temperate forests mycorrhizal fungi compete with the free-living community to reduce carbon degradation - a pattern not seen in a boreal forest. We established a site in Costa Rica to explore the impact of fungi and roots on tropical forest carbon cycling and again found that the results were context dependent. Building on this, I held a workshop with soil carbon modelers and soil ecologists to explore how experiments and models predict carbon dynamics. We conducted a meta-analysis and ran model simulation with 5 soil carbon models. Surprisingly, we found that the spread in the models and experiments were similar - they predicted responses equally well (Sulman et al. 2018). However, the area we seemed to know little about and that produced the most spread in the models, and thus the underlying model assumptions, was the response of protected and unprotected carbon pools. These seem like exciting areas to follow-up on in the future. In addition, data from these experiments spurred numerous other studies across ecosystems and with a variety of modeling groups focusing on how plant-soil interactions alter carbon and nutrient cycling. For example, Classen wrote an Ecological Society of America invited centennial review paper on this topic in 2015. Our group hosted several workshops that resulted in the Sulman et al. (2018) paper in Biogeoscience and Classen recently attended a workshop at the University of Michigan on mycorrhizal influence on the carbon cycle that resulted in another thought piece (Zak et al. 2019) in New Phytologist and she has an invited review paper at Functional Ecology (Bennett & Classen in review) on this topic. Overall, there were >25 papers published on this topic over the grant period with 15 more papers in revision/review that were related to this project – we have at least two more papers in preparation. We trained >27 students and postdocs and participated in numerous talks, workshops, and community events promoting the importance of soils, soil diversity, and global change.

54 ENVIRONMENTAL SCIENCES↗

Aboveground Biomass Variability Across Intact and Degraded Forests in the Brazilian Amazon

Deforestation rates have declined in the Brazilian Amazon since 2005, yet degradation from logging, re, and fragmentation has continued in frontier forests. In this study we quantified the aboveground carbon density (ACD) in intact and degraded forests using the largest data set of integrated forest inventory plots (n 359) and airborne lidar data (18,000 ha) assembled to date for the Brazilian Amazon. We developed statistical models relating inventory ACD estimates to lidar metrics that explained70 of the variance across forest types. Airborne lidar-ACD estimates for intact forests ranged between 5.0 +/- 2.5 and 31.9 +/- 10.8 kg C m(exp -2). Degradation carbon losses were large and persistent. Sites that burned multiple times within a decade lost up to 15.0 +/- 0.7 kg C m(-2)(94%) of ACD. Forests that burned nearly15 years ago had between 4.1 +/- 0.5 and 6.8 +/- 0.3 kg C m(exp -2) (22-40%) less ACD than intact forests. Even for low-impact logging disturbances, ACD was between 0.7 +/- 0.3 and 4.4 +/- 0.4 kg C m(exp -2)(4-21%) lower than unlogged forests. Comparing biomass estimates from airborne lidar to existing biomass maps, we found that regional and pan-tropical products consistently overestimated ACD in degraded forests, under-estimated ACD in intact forests, and showed little sensitivity to res and logging. Fine-scale heterogeneity in ACD across intact and degraded forests highlights the benefits of airborne lidar for carbon mapping. Differences between airborne lidar and regional biomass maps underscore the need to improve and update biomass estimates for dynamic land use frontiers, to better characterize deforestation and degradation carbon emissions for regional carbon budgets and Reduce Emissions from Deforestation and forest Degradation(REDD+).

Longo, Marcos↗

Forest responses to simulated elevated CO 2 under alternate hypotheses of size- and age-dependent mortality

Elevated atmospheric carbon dioxide (eCO 2 ) is predicted to increase growth rates of forest trees. The extent to which increased growth translates to changes in biomass is dependent on the turnover time of the carbon, and thus tree mortality rates. Size- or age-dependent mortality combined with increased growth rates could result in either decreased carbon turnover from a speeding up of tree life cycles, or increased biomass from trees reaching larger sizes, respectively. However, most vegetation models currently lack any representation of size- or age-dependent mortality and the effect of eCO 2 on changes in biomass and carbon turnover times is thus a major source of uncertainty in predictions of future vegetation dynamics. Using a reduced-complexity form of the vegetation demographic model the Functionally Assembled Terrestrial Ecosystem Simulator to simulate an idealised tropical forest, we find increases in biomass despite reductions in carbon turnover time in both size- and age-dependent mortality scenarios in response to a hypothetical eCO 2 -driven 25% increase in woody net primary productivity (wNPP). Carbon turnover times decreased by 9.6% in size-dependent mortality scenarios due to a speeding up of tree life cycles, but also by 2.0% when mortality was age-dependent, as larger crowns led to increased light competition. Increases in aboveground biomass (AGB) were much larger when mortality was age-dependent (24.3%) compared with size-dependent (13.4%) as trees reached larger sizes before death. In simulations with a constant background mortality rate, carbon turnover time decreased by 2.1% and AGB increased by 24.0%, however, absolute values of AGB and carbon turnover were higher than in either size- or age-dependent mortality scenario. The extent to which AGB increases and carbon turnover decreases will thus depend on the mechanisms of large tree mortality: if increased size itself results in elevated mortality rates, then this could reduce by about half the increase in AGB relative to the increase in wNPP.

59 BASIC BIOLOGICAL SCIENCES↗

Canopy position influences the degree of light suppression of leaf respiration in abundant tree genera in the Amazon Forest

Leaf respiration in the dark (R dark ) and light (R day ) is poorly characterized in diverse tropical ecosystems, and little to no information exists on the degree of light suppression in common tree species within the Amazon basin, and their dependences upon plant functional traits and position within the canopy. We quantified R dark and apparent R day using the Kok method and measured key leaf traits in 26 tree individuals of different species distributed in three different canopy positions: canopy, lower canopy, and understory. To explore the relationships between the leaf traits we used the standardized major axis (SMA). We found that canopy trees had significantly higher rates of R dark and R day than trees in the understory. The difference between R dark and R day (the light suppression of respiration) was greatest in the understory (68 ± 9%, 95% CI) and lower canopy (49 ± 9%, 95% CI) when compared to the canopy (37 ± 10%, 95% CI). We also found that R day was significantly and strongly correlated with R dark (p < 0.001) for all the canopy positions. Also, leaf mass per area (LMA) and leaf Phosphorus concentration (P) had a significant relationship with R dark (p < 0.001; p = 0.003), respectively. In addition, a significant relationship was found for LMA in the canopy and lower canopy positions (p = 0.009; p = 0.048) while P was only significant in the canopy (p = 0.044). Finally, no significant relationship was found between R dark and nitrogen, sugars, and starch. Our results highlight the importance of including representation of the light suppression of leaf respiration in terrestrial biosphere models and also of accounting for vertical gradients within forest canopies and connections with functional traits.

54 ENVIRONMENTAL SCIENCES↗

Digital twin framework for PIP-II linac: AI-driven multi-scale modeling from ion source to 800 MeV

The PIP-II superconducting linac at Fermilab is designed to deliver multi-megawatt proton beams for neutrino physics and other high-intensity applications. To expedite commissioning and enhance operational reliability, we have developed an EPICS-based data flow framework that seamlessly integrates digital twins (DT) with physical twins (PT). These digital twins comprise high-fidelity beam dynamics models or data-driven surrogate models connected to their physical counterparts through real-time diagnostics and advanced machine-learning algorithms.Central to this framework is Linac_Gen, an accelerated simulation tool that incorporates convolutional neural networks, random forests, and genetic algorithms to provide up to a tenfold speedup in optimizing the accelerator geometry model. An EPICS translator layer ensures interoperability by efficiently mapping lattice parameters across diverse simulation platforms.Our EPICS-based framework supports multiple operational modes—monitoring, passive learning, closed-loop control, and online learning—covering the entire machine lifecycle. By leveraging HPC resources and multi-objective optimization techniques, the digital twin enables adaptive trajectory correction, real-time fault detection, and predictive modeling of beam stability. This comprehensive approach paves the way for robust, high-intensity operation and data-driven accelerator R&D at Fermilab.

Pathak, Abhishek [Fermilab]↗

Calibration and Rapid-Adoption Forecasting Techniques

CRAFT (Calibration and Rapid-Adoption Forecasting Techniques) CRAFT is a Python-based project for processing, analyzing, and modeling atmospheric or environmental data. It uses machine learning techniques, specifically Random Forest Regression, to create emulators for various environmental variables such as gross primary production and soil water content. It then uses these emulators to robustly test the parameter space of mechanistic models to provide posterior estimations of the free parameters.

Robins, Zachary↗

A MODIS Photochemical Reflectance Index (PRI) as an Estimator of Isoprene Emissions in a Temperate Deciduous Forest

The quantification of isoprene and monoterpene emissions at the ecosystem level with available models and field measurements is not entirely satisfactory. Remote-sensing techniques can extend the spatial and temporal assessment of isoprenoid fluxes. Detecting the exchange of biogenic volatile organic compounds (BVOCs) using these techniques is, however, a very challenging goal. Recent evidence suggests that a simple remotely sensed index, the photochemical reflectance index (PRI), which is indicative of light-use efficiency, relative pigment levels and excess reducing power, is a good indirect estimator of foliar isoprenoid emissions. We tested the ability of PRI to assess isoprenoid fluxes in a temperate deciduous forest in central USA throughout the entire growing season and under moderate and extreme drought conditions. We then compared PRI time series calculated with MODIS bands to isoprene emissions measured with eddy covariance. MODIS PRI was correlated with isoprene emissions for most of the season, until emissions peaked. MODIS PRI was also able to detect the timing of the annual peak of emissions, even when it was advanced in response to drought conditions. PRI is thus a promising index to estimate isoprene emissions when it is complemented by information on potential emission. It may also be used to further improve models of isoprene emission under drought and other stress conditions. Direct estimation of isoprene emission by PRI is, however, limited, because PRI estimates LUE, and the relationship between LUE and isoprene emissions can be modified by severe stress conditions.

54 ENVIRONMENTAL SCIENCES↗

(abstract) Sensitivity to Forest Biomass Based on Analysis of Scattering Mechanism

The estimation of forest biomass on a global scale is an important input to global climate and carbon cycle models. Remote sensing using synthetic aperture radar offers a means to obtain such a data set. Although it has been clear for some time that radar signals penetrate forest canopies, only recently has it been demonstrated that these signals are indeed sensitive to biomass. Inasmuch as the majority of a forest's biomass is in the trunks, it is important that the radar is sensing the trunk biomass as opposed to the branch or leaf biomass. In this study we use polarimetric AIRSAR P- and L-band data from a variety of forests to determine if the radar penetrates to the trunk by examining the scattering mechanism as determined using van Zyl's scattering interaction model, and the levels at which saturation occurs with respect to sensitivity of radar backscatter to total biomass. In particular, the added sensitivity of P-band relative to L-band is addressed. Results using data from the Duke Forest in North Carolina, the Bonanza Creek Experimental Forest in Alaska, Shasta Forest in California, the Black Forest in Germany, the temporate/boreal transition forests in northern Michigan, and coastal forests along the Oregon Transect will be presented.

forest canopy biomass radar scattering mechanism↗

Sustained Nonphotochemical Quenching Shapes the Seasonal Pattern of Solar-Induced Fluorescence at a High-Elevation Evergreen Forest

Traditional methods of carbon monitoring in mountainous regions are challenged by complex terrain. Recently, solar-induced fluorescence (SIF) has been found to be an indicator of gross primary production (GPP), and the increased availability of remotely sensed SIF provides an opportunity to estimate GPP across the Western United States. Although the empirical linkage between SIF and GPP is strong, the current mechanistic understanding of this linkage is incomplete and depends upon changes in leaf biochemical processes in which absorbed sunlight leads to photochemistry, heat (via nonphotochemical quenching [NPQ]), fluorescence, or tissue damage. An improved mechanistic understanding is necessary to leverage SIF observations to improve representation of ecosystem processes within land surface models. Here we included an improved fluorescence model within the Community Land Model, Version 4.5 (CLM 4.5), to simulate seasonal changes in SIF at a subalpine forest in Colorado. We found that when the model accounted for sustained NPQ, this provided a larger seasonal change in fluorescence yield leading to simulated SIF that more closely resembled the observed seasonal pattern (Global Ozone Monitoring Experiment-2 [GOME-2] satellite platform and a tower-mounted spectrometer system). We found that an acclimation model based on mean air temperature was a useful predictor for sustained NPQ. Although light intensity was not an important factor for this analysis, it should be considered before applying the sustained NPQ and SIF to other cold climate evergreen biomes. More leaf-level fluorescence measurements are necessary to better understand the seasonal relationship between sustained and reversible components of NPQ and to what extent that influences SIF.

54 ENVIRONMENTAL SCIENCES↗

Impacts of seasonal and regional variability in biogenic VOC emissions on surface ozone in the Pearl River Delta region, China

In this study, the BVOC emissions in November 2010 over the Pearl River Delta (PRD) region in southern China have been estimated by the latest version of a Biogenic Volatile Organic Compound (BVOC) emission model (MEGAN v2.1). The evaluation of MEGAN performance at a representative forest site within this region indicates MEGAN can estimate BVOC emissions reasonably well in this region except overestimating isoprene emission in autumn for reasons that are discussed in this manuscript. Along with the output from MEGAN, the Weather Research and Forecasting model with chemistry (WRF-Chem) is used to estimate the impacts of BVOC emissions on surface ozone in the PRD region. The results show BVOC emissions increase the daytime ozone peak by *3 ppb on average, and the max hourly impacts of BVOC emissions on the daytime ozone peak is 24.8 ppb. Surface ozone mixing ratios in the central area of Guangzhou- Foshan and the western Jiangmen are most sensitive to BVOC emissions BVOCs from outside and central PRD influence the central area of Guangzhou-Foshan and the western Jiangmen significantly while BVOCs from rural PRD mainly influence the western Jiangmen. The impacts of BVOC emissions on surface ozone differ in different PRD cities, and the impact varies in different seasons. Foshan and Jiangmen being most affected in autumn, result in 6.0 ppb and 5.5 ppb increases in surface ozone concentrations, while Guangzhou and Huizhou become more affected in summer. Three additional experiments concerning the sensitivity of surface ozone to MEGAN input variables show that surface ozone is more sensitive to landcover change, followed by emission factors and meteorology.

Situ, S.↗

The large-scale quasar-Lyman α forest cross-correlation from BOSS

We measure the large-scale cross-correlation of quasars with the Lyα forest absorption in redshift space, using ∼ 60000 quasar spectra from Data Release 9 (DR9) of the Baryon Oscillation Spectroscopic Survey (BOSS). The cross-correlation is detected over a wide range of scales, up to comoving separations r of 80 h{sup −1}Mpc. For r > 15 h{sup −1}Mpc, we show that the cross-correlation is well fitted by the linear theory prediction for the mean overdensity around a quasar host halo in the standard ΛCDM model, with the redshift distortions indicative of gravitational evolution detected at high confidence. Using previous determinations of the Lyα forest bias factor obtained from the Lyα autocorrelation, we infer the quasar bias factor to be b{sub q} = 3.64{sup +0.13}{sub −0.15} at a mean redshift z = 2.38, in agreement with previous measurements from the quasar auto-correlation. We also obtain a new estimate of the Lyα forest redshift distortion factor, β{sub F} = 1.1±0.15, slightly larger than but consistent with the previous measurement from the Lyα forest autocorrelation. The simple linear model we use fails at separations r < 15h{sup −1}Mpc, and we show that this may reasonably be due to the enhanced ionization due to radiation from the quasars. We also provide the expected correction that the mass overdensity around the quasar implies for measurements of the ionizing radiation background from the line-of-sight proximity effect.

79 ASTRONOMY AND ASTROPHYSICS↗

Using a Canopy Model Framework to Improve Large-Eddy Simulations of the Neutral Atmospheric Boundary Layer in the Weather Research and Forecasting Model

A canopy model framework is implemented in the Weather Research and Forecasting Model to improve the accuracy of large-eddy simulations (LES) of the atmospheric boundary layer (ABL). The model includes two options that depend on the scale of surface roughness elements. A resolved canopy model, typically used to model flow through vegetation canopies, is employed when roughness elements are resolved by the vertical LES grid. In the case of unresolved roughness, a modified “pseudocanopy model” is developed to distribute drag over a shallow layer above the surface. Both canopy model options are validated against idealized test cases in neutral stability conditions and are shown to improve surface layer velocity profiles relative to simulations employing Monin–Obukhov similarity theory (MOST), which is commonly used as a surface boundary condition in ABL models. Use of the canopy model framework also leads to increased levels of resolved turbulence kinetic energy and turbulent stresses. Because LES of the ABL has a well-known difficulty recovering the expected logarithmic velocity profile (log law) in the surface layer, particular focus is placed on using the pseudocanopy model to alleviate this issue over a range of model configurations. Tests with varying surface roughness values, LES closures, and grid aspect ratios confirm that the pseudocanopy model generally improves log-law agreement relative to simulations that employ a standard MOST boundary condition. The canopy model framework thus represents a low-cost, easy-to-implement method for improving LES of the ABL.

17 WIND ENERGY↗

Determining the Drivers of Redox Sensitive Biogeochemistry in Humid Tropical Forests

Our objectives were to determine the spatial and temporal dynamics and drivers of soil O 2 availability and redox-sensitive biogeochemical processes using easily measured and modeled parameters. We used automated soil O 2 sensing coupled with measurements of soil chemical and physical properties, climate, and greenhouse gas concentrations and fluxes. These results are being used to derive quantitative relationships linking climate and soil physical properties to redox sensitive biogeochemical processes in tropical forests. We tested the hypothesis that hot spots and hot moments are driven primarily by high substrate availability using distributed sampling and field and lab fertilization experiments. To better model C and nutrient cycling and greenhouse gas fluxes in Earth system models we need to develop a more mechanistic understanding of the spatial and temporal dynamics and drivers of soil O 2 availability in tropical forest soils. In this study we used field and laboratory experiments to help develop a mechanistically derived redox component for the Community Land Model (CLM) module of the Community Earth System Model (CESM).

54 ENVIRONMENTAL SCIENCES↗

Climate and plant trait strategies determine tree carbon allocation to leaves and mediate future forest productivity

Abstract Forest leaf area has enormous leverage on the carbon cycle because it mediates both forest productivity and resilience to climate extremes. Despite widespread evidence that trees are capable of adjusting to changes in environment across both space and time through modifying carbon allocation to leaves, many vegetation models use fixed carbon allocation schemes independent of environment, which introduces large uncertainties into predictions of future forest responses to atmospheric CO 2 fertilization and anthropogenic climate change. Here, we develop an optimization‐based model, whereby tree carbon allocation to leaves is an emergent property of environment and plant hydraulic traits. Using a combination of meta‐analysis, observational datasets, and model predictions, we find strong evidence that optimal hydraulic–carbon coupling explains observed patterns in leaf allocation across large environmental and CO 2 concentration gradients. Furthermore, testing the sensitivity of leaf allocation strategy to a diversity in hydraulic and economic spectrum physiological traits, we show that plant hydraulic traits in particular have an enormous impact on the global change response of forest leaf area. Our results provide a rigorous theoretical underpinning for improving carbon cycle predictions through advancing model predictions of leaf area, and underscore that tree‐level carbon allocation to leaves should be derived from first principles using mechanistic plant hydraulic processes in the next generation of vegetation models.

Trugman, Anna T.↗

Efficient Surrogate Model Development: Impact of Sample Size and Underlying Model Dimensions

This study compares eight surrogate-model construction approaches using computational experiments. Here, the construction approaches considered include: Artificial Neural Networks (ANNs), Automated Learning of Algebraic Models using Optimization (ALAMO), Radial Basis Networks (RBNs), Extreme Learning Machines (ELMs), Gaussian Progress Regression (GPR), Random Forests (RFs), Support Vector Regression (SVR), and Multivariate Adaptive Regression Splines. Each approach is used to construct surrogate models for predicting the outputs of thirty-four test functions. The data used to construct surrogate models were generated using Latin Hypercube Sampling (LHS), Halton and Sobol sampling methods. We studied the impact of sampling method, sample size, and challenge function characteristics on the accuracy of surrogate model predictions. Our results revealed that for smaller sample sizes, on average, surrogate models trained using the data points generated by Sobol sequences provided the best estimation for all surrogate model construction approaches. As the sample size increased, the impact of sampling methods diminished. The comparison of surrogate-modeling construction approaches at large sample sizes revealed that surrogate models trained using ANN, ALAMO, and ELM yielded smaller root mean squared error and higher adjusted R-squared values than the models trained using the rest of the approaches.

42 ENGINEERING↗

Forest biomass supply logistics for a power plant using the discrete-event simulation approach

This study investigates the logistics of supplying forest biomass to a potential power plant. Due to the complexities in such a supply logistics system, a simulation model based on the framework of Integrated Biomass Supply Analysis and Logistics (IBSAL) is developed in this study to evaluate the cost of delivered forest biomass, the equilibrium moisture content, and carbon emissions from the logistics operations. The model is applied to a proposed case of 300 MW power plant in Quesnel, BC, Canada. The results show that the biomass demand of the power plant would not be met every year. The weighted average cost of delivered biomass to the gate of the power plant is about C$ 90 per dry tonne. Estimates of equilibrium moisture content of delivered biomass and CO2 emissions resulted from the processes are also provided.

Bioenergy↗