Search NASA⌕ Search

SEARCH · Search NASA

Results for “High current density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Helium /3/ rich solar flares

Several aspects of a solar flare model that emphasizes evidence for the formation of current filaments as mechanisms of field dissipation are discussed. The origin of flare magnetic fields is considered, along with the thermal distribution, electron density, and high-energy X ray emission of flares. It is suggested that the extreme He-3 enrichment in some solar flares is due to spallation and the subsequent confinement of spallation products in a high-temperature high-density plasma associated with the magnetic instability that produces the flare. A current filament is assumed to produce the spallation and maintain the temperature that yields the high-energy X-ray spectrum and depletes the isotopes D, Li, Be, and B, as observed.

Colgate, S. A.↗

Dose dependent electrical and structural properties of BiFeO{sub 3} nanoparticles under electron irradiation

The paper deals with the effect of electron irradiation on the structural and electrical properties of BiFeO{sub 3} nanoparticles synthesized by standard sol-gel method. The samples were subjected to electron irradiation using a Microtron accelerator. The effects of irradiation on structural morphology viz grain size, microstrain and dislocation have been studied by X-ray diffraction (XRD). The current density of the samples at various doses of high energy electrons was also studied. It was observed that electrical conductivity depends on electron dose.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dissipative and fast-timescale phenomena in superconductors

This project explored new effects and regimes that unfold in superconductors as they are pushed to ex treme and unprecedented conditions of electric field, power densities, vortex velocities, etc. Besides their own novelty, these phenomena yield fundamental in formation about the superconducting state and its parameters, as well as its practical limits for techno logical applications. Furthermore some of these ef fects (such as formation of phase slip processes and the acceleration of superfluid) are time dependent on time scales such as quasiparticle-phonon energy re laxation and gap relaxation. This project used fast low-duty-cycle pulsed signals to first of all access these regimes without excessive heating and secondly to observe directly in the time domain the temporal unfolding of these phenomena on nanosecond time scales. This project led to the discovery of new effects in the transport behavior in superconductors, provided new information on fundamental parameters, and helped establish intrinsic strengths and limitations of different superconducting materials for ap plications. The primary tools developed for extending the range of measurable dissipation densities and observation of short time-scale phenomena were fast pulsed-current and pulsed-voltage sources, and fast high-CM-rejection detection circuitry. This allowed conducting measurements at power densities in the 10 10 W/cm 3 range, and at E ~ 1 kV/cm and v Φ ~10 km/s. Also developed was the ability to simultaneously track current I(t) and voltage V (t) and cross correlate them with sub-nanosecond temporal resolution. A recent angle of this project was the exploration of subtle phenomena at low current densities, especially for the magnetic field orientation parallel to the plane of the films. Through modifications of the pulsed tube closed cycle cryostat, we developed methods for attaining low-noise and high temperature-stability conditions. This led to the observation of novel dimensional effects related to the mixed state and vortex matter, and to a new type of magnetoresistance oscillation.

36 MATERIALS SCIENCE↗

In Situ Coupling Strategy for the Preparation of FeCo Alloys and Co 4 N Hybrid for Highly Efficient Oxygen Evolution

An in situ coupling approach is developed to create a new highly efficient and durable cobalt-based electrocatalyst for the oxygen evolution reaction (OER). Using a novel cyclotetramerization, a task-specific bimetallic phthalocyanine-based nanoporous organic framework is successfully built as a precursor for the carbonization synthesis of a nonprecious OER electrocatalyst. The resultant material exhibits an excellent OER activity with a low overpotential of 280 mV at a current density of 10 mA cm –2 and high durability in an alkaline medium. This impressive result ranks among the best from known Co-based OER catalysts under the same conditions. The simultaneous installation of multiple diverse cobalt-based active sites, including FeCo alloys and Co 4 N nanoparticles, plays a critical role in achieving this promising OER performance. Lastly, this innovative approach not only enables high-performance OER activity to be achieved but simultaneously provides a means to control the surface features, thereby tuning the catalytic property of the material.

36 MATERIALS SCIENCE↗

On the density limit in the helicon plasma sources

Existence of the density limit in the helicon plasma sources is revisited. The low- and high-frequency regimes of a helicon plasma source operation are distinguished. In the low-frequency regime with ω<√(ω{sub ci}ω{sub ce}), the density limit is deduced from the Golant-Stix criterion of the accessibility of the lower hybrid resonance. In the high-frequency case, ω>√(ω{sub ci}ω{sub ce}), an appropriate limit is given by the Shamrai-Taranov criterion. Both these criteria are closely related to the phenomenon of the coalescence of the helicon wave with the Trivelpiece-Gould mode. We draw a conclusion that the derived density limits are not currently achieved in existing devices, perhaps, because of high energy cost of gas ionization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Epitaxial (La, Sr)TiO 3 on Textured Ni?W as a Conductive Buffer Architecture for High Temperature Superconducting Coated Conductor

The formation of epitaxial (La,Sr)TiO3 on biaxially-textured Ni W metal alloy tape was examined as a conductive buffer layer for YBa2Cu3O7 film growth. A TiN epitaxial nucleation layer served as an effective template layer for subsequent (La,Sr)TiO3 film growth on the Ni W tape. The TiN/(La, Sr)TiO3 multilayer was epitaxial on the Ni W substrate as confirmed via four-circle X-ray diffraction. A high temperature superconducting YBa2Cu3O7 film was deposited epitaxially on the (La,Sr)TiO3/TiN/Ni W tape. The YBa2-Cu3O7 film exhibited a superconducting transition temperature of 86 K and critical current density of 0.42 x 106 A/cm2 at 77 K.

36 MATERIALS SCIENCE↗

The advanced tokamak path to a compact net electric fusion pilot plant

Abstract Physics-based simulations project a compact net electric fusion pilot plant with a nuclear testing mission is possible at modest scale based on the advanced tokamak concept, and identify key parameters for its optimization. These utilize a new integrated 1.5D core-edge approach for whole device modeling to predict performance by self-consistently applying transport, pedestal and current drive models to converge fully non-inductive stationary solutions, predicting profiles and energy confinement for a given density. This physics-based approach leads to new insights and understanding of reactor optimization. In particular, the levering role of high plasma density is identified, which raises fusion performance and self-driven ‘bootstrap currents’, to reduce current drive demands and enable high pressure with net electricity at a compact scale. Solutions at 6–7 T, ∼4 m radius and 200 MW net electricity are identified with margins and trade-offs possible between parameters. Current drive comes from neutral beam and ultra-high harmonic (helicon) fast wave, though other advanced approaches are not ruled out. The resulting low recirculating power in a double null configuration leads to a divertor heat flux challenge that is comparable to ITER, though reactor solutions may require more dissipation. Strong H-mode access (x2 margin over L–H transition scalings) and ITER-like heat fluxes are maintained with ∼20%–60% core radiation, though effects on confinement need further analysis. Neutron wall loadings appear tolerable. The approach would benefit from high temperature superconductors, as higher fields would increase performance margins while potential for demountability may facilitate nuclear testing. However, solutions are possible with conventional superconductors. An advanced load sharing and reactive bucking approach in the device centerpost region provides improved mechanical stress handling. The prospect of an affordable test device which could close the loop on net-electric production and conduct essential nuclear materials and breeding research is compelling, motivating research to validate the techniques and models employed here.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Direct wafer bonding technology for large-scale InGaAs-on-insulator transistors

Heterogeneous integration of III-V devices on Si wafers have been explored for realizing high device performance as well as merging electrical and photonic applications on the Si platform. Existing methodologies have unavoidable drawbacks such as inferior device quality or high cost in comparison with the current Si-based technology. In this paper, we present InGaAs-on-insulator (-OI) fabrication from an InGaAs layer grown on a Si donor wafer with a III-V buffer layer instead of growth on a InP donor wafer. This technology allows us to yield large wafer size scalability of III-V-OI layers up to the Si wafer size of 300 mm with a high film quality and low cost. The high film quality has been confirmed by Raman and photoluminescence spectra. In addition, the fabricated InGaAs-OI transistors exhibit the high electron mobility of 1700 cm{sup 2}/V s and uniform distribution of the leakage current, indicating high layer quality with low defect density.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamic oxidation of (Mn,Co) 3 O 4 -Coated interconnects for solid oxide electrolysis cells

Solid oxide electrolysis cell stacks are expected to experience dynamic conditions when using renewable electricity derived from wind or solar power. To address this scenario, (Mn,Co) 3 O 4 (MCO)-coated Crofer 22 APU interconnect coupons are subjected to thermal cycling, and intermittent current density, with gas compositions relevant to high-temperature electrolysis (elevated steam:hydrogen ratio and oxygen content). Defects are also intentionally introduced in the MCO coating, to assess whether the difference in oxidation properties of the adjacent coated and uncoated (defective) surfaces causes sufficient stress to damage the protective oxide scale. Specimens with defects are subjected to oxidation for 1000 h at 800 °C, or thermal cycling. Before thermal cycling, some specimens are pre-oxidized to create a thick oxide scale to mimic the scale thickness expected after ~30 kh operation. In all cases, the coating and oxide scale remain well adhered with no cracking observed. Area-specific resistance (ASR) is monitored in both single-atmosphere and dual-atmosphere conditions, and the ASR is stable and is not impacted by dynamic cycling of the current density. Finally, this work provides confidence that the MCO coated interconnect will function as needed in dynamic operation conditions, even with coating defects.

08 HYDROGEN↗

Modeling photovoltaic performance in periodic patterned colloidal quantum dot solar cells

Colloidal quantum dot (CQD) solar cells have attracted tremendous attention mostly due to their wide absorption spectrum window and potentially low processability cost. The ultimate efficiency of CQD solar cells is highly limited by their high trap state density. Here in this paper we show that the overall device power conversion efficiency could be improved by employing photonic structures that enhance both charge generation and collection efficiencies. By employing a two-dimensional numerical model, we have calculated the characteristics of patterned CQD solar cells based of a simple grating structure. Our calculation predicts a power conversion efficiency as high as 11.2%, with a short circuit current density of 35.2 mA/cm 2 , a value nearly 1.5 times larger than the conventional flat design, showing the great potential value of patterned quantum dot solar cells.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Implementation and Initial Validation of a 100-Kilowatt Class Nested-Channel Hall Thruster

The X3 is a 100-kilowatt class nested-channel Hall thruster developed by the Plasmadynamics and Electric Propulsion Laboratory at the University of Michigan in collaboration with the Air Force Research Laboratory and NASA. The cathode, magnetic circuit, boron nitride channel rings, and anodes all required specific design considerations during thruster development, and thermal modeling was used to properly account for thermal growth in material selection and component design. A number of facility upgrades were required at the University of Michigan to facilitate operation of the X3. These upgrades included a re-worked propellant feed system, a completely redesigned power and telemetry break-out box, and numerous updates to thruster handling equipment. The X3 was tested on xenon propellant at two current densities, 37% and 73% of the nominal design value. It was operated to a maximum steady-state discharge power of 60.8 kilowatts. The tests presented here served as an initial validation of thruster operation. Thruster behavior was monitored with telemetry, photography and high-speed current probes. The photography showed a uniform plume throughout testing. At constant current density, reductions in mass flow rate of 18% and 26% were observed in the three-channel operating configuration as compared to the superposition of each channel running individually. The high-speed current probes showed that the thruster was stable at all operating points and that the channels influence each other when more than one is operating simultaneously. Additionally, the ratio of peak-to-peak AC-coupled discharge current oscillations to mean discharge current did not exceed 51% for any operating points reported here, and did not exceed 17% at the higher current density.

High Power↗

High Temperature Polymers for use in Fuel Cells

NASA Glenn Research Center (GRC) is currently working on polymers for fuel cell and lithium battery applications. The desire for more efficient, higher power density, and a lower environmental impact power sources has led to interest in proton exchanges membrane fuels cells (PEMFC) and lithium batteries. A PEMFC has many advantages as a power source. The fuel cell uses oxygen and hydrogen as reactants. The resulting products are electricity, heat, and water. The PEMFC consists of electrodes with a catalyst, and an electrolyte. The electrolyte is an ion-conducting polymer that transports protons from the anode to the cathode. Typically, a PEMFC is operated at a temperature of about 80 C. There is intense interest in developing a fuel cell membrane that can operate at higher temperatures in the range of 80 C- 120 C. Operating the he1 cell at higher temperatures increases the kinetics of the fuel cell reaction as well as decreasing the susceptibility of the catalyst to be poisoned by impurities. Currently, Nafion made by Dupont is the most widely used polymer membrane in PEMFC. Nafion does not function well above 80 C due to a significant decrease in the conductivity of the membrane from a loss of hydration. In addition to the loss of conductivity at high temperatures, the long term stability and relatively high cost of Nafion have stimulated many researches to find a substitute for Nafion. Lithium ion batteries are popular for use in portable electronic devices, such as laptop computers and mobile phones. The high power density of lithium batteries makes them ideal for the high power demand of today s advanced electronics. NASA is developing a solid polymer electrolyte that can be used for lithium batteries. Solid polymer electrolytes have many advantages over the current gel or liquid based systems that are used currently. Among these advantages are the potential for increased power density and design flexibility. Automobiles, computers, and cell phones require highly efficient power density for lowering emissions and meeting increasing consumer demands. Many of the solutions can be provided by proton exchange membrane fuel cells and lithium batteries. NASA Glenn Research Center has recognized this need, and is presently engaged in a solution. The goals for the summer include mastering synthesis techniques, understanding the reactions occurring during the synthesis, and characterizing the resulting polymer membranes using NMR, DSC, and TGA for the PEMFC and lithium batteries.

Peplowski, Katherine M.↗

Time-dependent current-density-functional theory of charge, energy and spin transport and dynamics in nanoscale systems (Final Report)

The focus of this research program is on developing density functional methods for the calculation of non-equilibrium phenomena of the transport type (finite wavelength, low frequency) and of the dynamical type (long wavelength, high frequency). One such method is the time-dependent current density functional theory, in which the evolution of the physical system is mimicked in a fictitious non-interacting system subjected to an effective one-particle potential, which we approximate as a function of the equilibrium density and non-equilibrium current density.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic probe diagnostics of nonlinear standing waves and bulk ohmic electron power absorption in capacitive discharges

It is recognized that standing wave effects appearing in large-area, very-high-frequency capacitively coupled plasma (CCP) reactors cause center-high plasma non-uniformity. Using a high-frequency magnetic probe, we present a direct experimental diagnostic of the nonlinear standing waves and bulk ohmic electron power absorption dynamics in low pressure CCP discharges for different driving frequencies of 13.56, 30, and 60 MHz. The design, principle, calibration, and validation of the probe are described in detail. Spatial structures of the harmonics of the magnetic field, determined by the magnetic probe, were used to calculate the distributions of the harmonic current and the corresponding ohmic electron power deposition, providing insights into the behavior of nonlinear harmonics. At a low driving frequency, i.e. 13.56 MHz, no remarkable nonlinear standing waves were identified and the bulk ohmic electron power absorption was observed to be negligible. Here, the harmonic magnetic field/current was found to increase dramatically with the driving frequency, due to decreased sheath reactance and more remarkable nonlinear standing waves at a higher driving frequency, leading to the enhancements of the ohmic heating and the plasma density in the bulk, specifically at the electrode center. At a high driving frequency, i.e. 60 MHz, the high-order harmonic current density and the corresponding ohmic electron power absorption exhibited a similar node structure, with the main peak on axis, and one or more minor peaks between the electrode center and the edge, contributing to the center-high profile of the plasma density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

How Ionospheric Ions Populate the Magnetosphere during a Magnetic Storm

Ionospheric oxygen ions have been observed throughout the magnetosphere, from the plasma sheet to the ring current region. I t has been found that the O+ /H+ density ratio in the magnetosphere increases with geomagnetic activity and varies with storm phases. During the magnetic storm in late September to earIy October 2002, Cluster was orbiting in the plasma sheet and ring current regions. At prestorm time, Cluster observed high H+ density and low O+ density in the plasma sheet and lobes. During the storm main phase, 0+ density has increased by 10 times over the pre-storm level. Strong field-aligned beams of O+ were observed in the lobes. O+ fluxes were significantly reduced in the central plasma sheet during the storm recovery. However, 0+ was still evident on the boundaries of the plasma sheet and in the lobes. In order to interpret the Cluster observations and to understand how O+ ions populate the magnetosphere during a magnetic storm, we model the storm in early October 2002 using our global ion kinetic simulation (GIK). We use the LFN global simulation model to produce electric and magnetic fields in the outer magnetosphere, the Strangeway outflow scaling with Delcourt ion trajectories to include ionospheric outflows, and the Fok inner magnetospheric model for the plasmaspheric and ring current response to all particle populations. We find that the observed composition features are qualitatively reproduced by the simulations, with some quantitative differences that point to future improvements in the models.

Fok, Mei-Ching↗

A thousand-fold enhancement of photoluminescence in porous silicon using ion irradiation

A large increase in the porosity of highly doped p-type silicon is observed at the end-of-range depth of high-energy ions after subsequent electrochemical anodization. This occurs under certain conditions of irradiation geometry and fluence, owing to the dual effects of increased wafer resistivity and a locally increased current density during anodization. This results in the creation of highly porous, sub-surface zones which emit photoluminescence with an intensity of more than three orders of magnitude greater than the surrounding mesoporous silicon, comparable to that produced by microporous silicon. This provides means of selectively enhancing and patterning the photoluminescence emission from micron-sized areas of porous silicon over a wide range of intensity.

36 MATERIALS SCIENCE↗