Search NASA⌕ Search

SEARCH · Search NASA

Results for “Integral Experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Computed Tomography Support for Microgravity Materials Science Experiments

The accurate measurement of density in both liquid and solid samples is of considerable interest to Principal Investigators with materials science experiments slated for the ISS. The work to be described is an innovative application of a conventional industrial nondestructive evaluation instrument. Traditional applications of industrial computed tomography (CT) rely on reconstructing cross sections of large structures to provide two-dimensional planar views which can identify defects such as porosity, or other material anomalies. This has been done on microgravity materials science experiments to check the integrity of ampoule-cartridge assemblies for safety purposes. With a substantially monoenergetic flux, as can be obtained with a radioactive cobalt source, there will be a direct correlation between absorption and density. Under such conditions it then becomes possible to make accurate measurements of density throughout a sample, and even when the sample itself is enclosed within a furnace and a safety required cartridge. Such a system has been installed at Kennedy Space Center (KSC) and is available to PIs to examine samples before and after flight. The CT system is being used to provide density information for two purposes. Firstly, the determination of density changes from liquid to solid is vital information to the PI for purposes of modeling the solidification behavior of his sample, and to engineers who have to design containment ampoules and must allow for shrinkage and other volume changes that may occur during processing. While such information can be obtained by pycnometric measurements, the possibility of using a furnace installed on the CT system enables one to examine potentially dangerous materials having high vapor pressures, while not needing visible access to the material. In addition, uniform temperature can readily be obtained, and the system can be controlled to ramp up, hold, and ramp down while collecting data over a wide range of parameters automatically. Results of initial tests on low melting point elements such as gallium, indium and tin will be presented, and the intent is to proceed to compounds such as InSb, HgCdTe and CdTe. Alloys such as Pb-Sb (PI - Poirier, U AZ) and Cu-Al (PI - Trivedi, Ames Lab.), which are the subjects of flight experiments, will also be examined. The second application is the conversion of measured density values directly to composition. This was successfully done with the mercury cadmium telluride alloys grown on the second and fourth United States Microgravity Payload (USMP-2 and USMP-4) missions by Lehoczky. CdTe values along the length of the boules were obtained at KSC prior to cutting the sample, and could have been obtained prior to its removal from the cartridge and ampoule. Examples of the data obtained will be shown. It is anticipated that several of the materials science PIs will avail themselves of the technique described, initially for determining densities prior to flight, and then to acquire early quantitative data on the compositional variation within their samples.

Gillies, Donald C.↗

Effect of Recrystallization on Gas Bubble Swelling in UMo Fuels

The development of low-enriched uranium (LEU) fuels such as UMo dispersion fuels and monolithic UMo fuels is part of a global effort on nuclear nonproliferation. Although UMo fuels have the advantage of high density, excellent irradiation performance and good thermal conductivity, the volumetric swelling in irradiated metallic fuels is known to be an important design parameter because it affects not only the thermal conductivity of the fuels but also the mechanical integrity of fuel structures. Experiments also show that recrystallization dramatically affects the gas bubble swelling kinetics. A series of materials processes such as casting, mechanical rolling and thermal treatment are used in fuel fabrication. Resulting microstructure, such as grain size, porosity, and second phase, strongly depends on the material processes and process parameters. Therefore, a fundamental understanding how fabricated microstructures and irradiation conditions affect the nucleation of gas bubbles, recrystallization and gas bubble swelling kinetics is essential for optimizing material processes to obtain desired microstructure and fuel performance. Great effort has been made in the development of modeling capability for predicting gas bubble swelling kinetics and fission gas release kinetics in nuclear fuels. However, these models are based on the assumptions that the inter- and intra-granular gas bubble sizes are independent of position and only depend on time or fission density. Therefore, they are applicable to a material with uniform microstructure such as equiaxed grains with homogeneous defect distributions, homogeneous thermodynamic and kinetic properties of defects, and uniform radiation conditions. Very recently, we developed a three dimension (3D) microstructure dependent gas bubble swelling model for investigating the effect of heterogeneous microstructures and inhomogeneous thermodynamic properties of defects on gas bubble swelling in polycrystalline UMo fuels. However, the model doesn't take into account the effect of recrystallization on swelling kinetics. In this work, the spatially dependent rate theory is used to describe the evolution of interstitials and interstitial loop density. Recrystallization is described by a phase-field model with a concept of 'phase transition' when the local interstitial loop density is larger than a critical value. The intra- and inter- granular gas bubble evolution is described by the spatially dependent Booth model. A model integrating all the microstructure evolution enables one to study the effect of heterogeneous microstructures, recrystallization, and the metallic fuel thermodynamic and kinetic properties on gas bubble swelling kinetics.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Python-Based Scientific Analysis and Visualization of Precipitation Systems at NASA Marshall Space Flight Center

At NASA Marshall Space Flight Center (MSFC), Python is used several different ways to analyze and visualize precipitating weather systems. A number of different Python‐based software packages have been developed, which are available to the larger scientific community. The approach in all these packages is to utilize pre‐existing Python modules as well as to be object‐oriented and scalable. The first package that will be described and demonstrated is the Python Advanced Microwave Precipitation Radiometer (AMPR) Data Toolkit, or PyAMPR for short. PyAMPR reads geolocated brightness temperature data from any flight of the AMPR airborne instrument over its 25‐year history into a common data structure suitable for user‐defined analyses. It features rapid, simplified (i.e., one line of code) production of quick‐look imagery, including Google Earth overlays, swath plots of individual channels, and strip charts showing multiple channels at once. These plotting routines are also capable of significant customization for detailed, publication‐ready figures. Deconvolution of the polarization‐varying channels to static horizontally and vertically polarized scenes is also available. Examples will be given of PyAMPR's contribution toward real‐time AMPR data display during the Integrated Precipitation and Hydrology Experiment (IPHEx), which took place in the Carolinas during May‐June 2014. The second software package is the Marshall Multi‐Radar/Multi‐Sensor (MRMS) Mosaic Python Toolkit, or MMM‐Py for short. MMM‐Py was designed to read, analyze, and display three‐dimensional national mosaicked reflectivity data produced by the NOAA National Severe Storms Laboratory (NSSL). MMM‐Py can read MRMS mosaics from either their unique binary format or their converted NetCDF format. It can also read and properly interpret the current mosaic design (4 regional tiles) as well as mosaics produced prior to late July 2013 (8 tiles). MMM‐Py can easily stitch multiple tiles together to provide a larger regional or national picture of precipitating weather systems. Composites, horizontal and vertical crosssections, and combinations thereof are easily displayed using as little as one line of code. MMM‐Py can also write to the native MRMS binary format, and sub‐sectioning of tiles (or multiple stitched tiles) is anticipated to be in place by the time of this meeting. Thus, MMM‐Py also can be used to power the creation of custom mosaics for targeted regional studies. Overlays of other data (e.g., lightning observations) are easily accomplished. Demonstrations of MMM‐Py, including the creation of animations, will be shown. Finally, Marshall has done significant work to interface Python‐based analysis routines with the U.S. Department of Energy's Py‐ART software package for radar data ingest, processing, and analysis. One example of this is the Python Turbulence Detection Algorithm (PyTDA), an MSFC‐based implementation of the National Center for Atmospheric Research (NCAR) Turbulence Detection Algorithm (NTDA) for the purposes of convective‐scale analysis, situational awareness, and forensic meteorology. PyTDA exploits Py‐ART's radar data ingest routines and data model to rapidly produce aviation‐relevant turbulence estimates from Doppler radar data. Work toward processing speed optimization and better integration within the Py‐ART framework will be highlighted. Python‐based analysis within the Py‐ART framework is also being done for new research related to intercomparison of ground‐based radar data with satellite estimates of ocean winds, as well as research on the electrification of pyrocumulus clouds.

Lang, Timothy J.↗

Updated branching fraction measurements of B(s)0 → KS0h+h'- decays

The charmless three-body decays B( s ) 0 → K S 0 h + h' - (where h (') = π, K) are analysed using a sample of pp collision data recorded by the LHCb experiment, corresponding to an integrated luminosity of 3 fb -1 . The branching fractions are measured relative to that of the B 0 → K S 0 π + π - decay.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

MINE: a new way to design genetics experiments for discovery

Abstract The Maximally Informative Next Experiment or MINE is a new experimental design approach for experiments, such as those in omics, in which the number of effects or parameters p greatly exceeds the number of samples n (p > n). Classical experimental design presumes n > p for inference about parameters and its application to p > n can lead to over-fitting. To overcome p > n, MINE is an ensemble method, which makes predictions about future experiments from an existing ensemble of models consistent with available data in order to select the most informative next experiment. Its advantages are in exploration of the data for new relationships with n < p and being able to integrate smaller and more tractable experiments to replace adaptively one large classic experiment as discoveries are made. Thus, using MINE is model-guided and adaptive over time in a large omics study. Here, MINE is illustrated in two distinct multiyear experiments, one involving genetic networks in Neurospora crassa and a second one involving a genome-wide association study in Sorghum bicolor as a comparison to classic experimental design in an agricultural setting.

Biochemistry & Molecular Biology↗

Search for CP violation in $ t\overline{t} $ production and decay in proton-proton collisions at $ \sqrt{s}=8 $ TeV

The results of a first search for CP violation in the production and decay of top quark-antiquark ( $ t\overline{t} $ ) pairs are presented. The search is based on asymmetries in T-odd, triple-product correlation observables, where T is the time-reversal operator. The analysis uses a sample of proton-proton collisions at $ \sqrt{s}=8 $ TeV collected by the CMS experiment, corresponding to an integrated luminosity of 19.7 fb$^{−1}$. Events are selected having one electron or muon and at least four jets. The T-odd observables are measured using four-momentum vectors associated with $ t\overline{t} $ production and decay. The measured asymmetries exhibit no evidence for CP-violating effects, consistent with the expectation from the standard model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of forward W and Z boson production in association with jets in proton-proton collisions at $\sqrt{s}=8$ TeV

The production of W and Z bosons in association with jets is studied in the forward region of proton-proton collisions collected at a centre-of-mass energy of 8 TeV by the LHCb experiment, corresponding to an integrated luminosity of 1.98 ± 0.02 fb –1 . The W boson is identified using its decay to a muon and a neutrino, while the Z boson is identified through its decay to a muon pair. Total cross-sections are measured and combined into charge ratios, asymmetries, and ratios of W +jet and Z+jet production cross-sections. Differential measurements are also performed as a function of both boson and jet kinematic variables. All results are in agreement with Standard Model predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Study of coherent J/ ψ production in lead-lead collisions at $\sqrt{{\mathrm{s}}_{\mathrm{NN}}} $ = 5 TeV

Coherent production of J/ψ mesons is studied in ultraperipheral lead-lead collisions at a nucleon-nucleon centre-of-mass energy of 5 TeV, using a data sample collected by the LHCb experiment corresponding to an integrated luminosity of about 10 μb –1 . The J/ψ mesons are reconstructed in the dimuon final state and are required to have transverse momentum below 1 GeV. The cross-section within the rapidity range of 2.0 < y < 4.5 is measured to be 4.45 ± 0.24 ± 0.18 ± 0.58 mb, where the first uncertainty is statistical, the second systematic and the third originates from the luminosity determination. The cross-section is also measured in J/ψ rapidity intervals. The results are compared to predictions from phenomenological models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for supersymmetry using Higgs boson to diphoton decays at $\sqrt{s}$ = 13 TeV

A search for supersymmetry (SUSY) is presented where at least one Higgs boson is produced and decays to two photons in the decay chains of pair-produced SUSY particles. Two complementary analysis strategies are pursued: one focused on strong SUSY production and the other focused on electroweak SUSY production. The presence of charged leptons, additional Higgs boson candidates, and various kinematic variables are used to categorize events into search regions that are sensitive to different SUSY scenarios. The results are based on data from proton-proton collisions at the Large Hadron Collider at a center-of-mass energy of 13 TeV collected by the CMS experiment, corresponding to an integrated luminosity of 77.5 fb$^{-1}$. No statistically significant excess of events is observed relative to the standard model expectations. We exclude bottom squark pair production for bottom squark masses below 530 GeV and a lightest SUSY particle mass of 1 GeV; wino-like chargino-neutralino production for chargino and neutralino masses below 235 GeV with a gravitino mass of 1 GeV; and higgsino-like chargino-neutralino production in the case where the neutralino decays exclusively to a Higgs boson and a gravitino for neutralino masses below 290 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Observation of a $ {\varLambda}_b^0 $ - $ {\overline{\varLambda}}_b^0 $ production asymmetry in proton-proton collisions at $ \sqrt{s} $ = 7 and 8 TeV

This article presents differential measurements of the asymmetry between $ {\varLambda}_b^0 $ - $ {\overline{\varLambda}}_b^0 $ baryon production rates in proton-proton collisions at centre-of-mass energies of $\sqrt{s}$ = 7 and 8 TeV collected with the LHCb experiment, corresponding to an integrated luminosity of 3 fb -1 . The ${\varLambda}_b^0 $ baryons are reconstructed through the inclusive semileptonic decay ${\varLambda}_b^0 $ → Λ+c μ - $\overline{ν}$ μX. The production asymmetry is measured both in intervals of rapidity in the range 2.15 < y < 4.10 and transverse momentum in 2 < p T < 27 GeV/c. The results are found to be incompatible with symmetric production with a significance of 5.8 standard deviations for both $\sqrt{s}$ = 7 and 8 TeV data, assuming no CP violation in the decay. There is evidence for a trend as a function of rapidity with a significance of 4 standard deviations. Comparisons to predictions from hadronisation models in PYTHIA and heavy-quark recombination are provided. This result constitutes the first observation of a particle-antiparticle asymmetry in b-hadron production at LHC energies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of W + W - + ≥ 1 jet production cross-sections in pp collisions at $ \sqrt{s} $ = 13 TeV with the ATLAS detector

Fiducial and differential cross-section measurements of W + W - production in association with at least one hadronic jet are presented. These measurements are sensitive to the properties of electroweak-boson self-interactions and provide a test of perturbative quantum chromodynamics and the electroweak theory. The analysis is performed using proton-proton collision data collected at $ \sqrt{s} $ = 13 TeV with the ATLAS experiment, corresponding to an integrated luminosity of 139 fb -1 . Events are selected with exactly one oppositely charged electron-muon pair and at least one hadronic jet with a transverse momentum of p T > 30 GeV and a pseudorapidity of |η| < 4.5. After subtracting the background contributions and correcting for detector effects, the jet-inclusive W + W - + ≥ 1 jet fiducial cross-section and W + W - + jets differential cross-sections with respect to several kinematic variables are measured. These measurements include leptonic quantities, such as the lepton transverse momenta and the transverse mass of the W + W - system, as well as jet-related observables such as the leading jet transverse momentum and the jet multiplicity. Limits on anomalous triple-gauge-boson couplings are obtained in a phase space where interference between the Standard Model amplitude and the anomalous amplitude is enhanced.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Sterile neutrinos and the global reactor antineutrino dataset

We present results from global fits to the available reactor antineutrino dataset, as of Fall 2019, to determine the global preference for a fourth, sterile neutrino. We have separately considered experiments that measure the integrated inverse-beta decay (IBD) rate from those that measure the energy spectrum of IBD events at one or more locations. The evidence that we infer from rate measurements varies between ≲ 3σ and negligible depending on the reactor antineutrino flux model employed. Moreover, we find that spectral ratios ostensibly imply ≳ 3σ evidence, consistent with previous work, though these measurements are known to be plagued by issues related to statistical interpretation; these results should therefore be viewed cautiously. The software used is the newly developed GLoBESfit tool set which is based on the publicly available GLoBES framework and will be released as open-source software.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measurement of the ratio of branching fractions and difference in CP asymmetries of the decays $B^+$ → $J/ψπ^+$ and $B^+$ → $J/ψK^+$

The ratio of branching fractions and the difference in $CP$ asymmetries of the decays $B^+$ → $J/ψπ^+$ and $B^+$ → $J/ψK^+$ are measured using a data sample of $pp$ collisions collected by the LHCb experiment, corresponding to an integrated luminosity of 3 fb -1 at centre-of-mass energies of 7 and 8 TeV. The results are B ( B + &#x2192;<!-- → --> J / &#x03C8;<!-- ψ --> &#x03C0;<!-- π --> + ) B ( B + &#x2192;<!-- → --> J / &#x03C8;<!-- ψ --> K + ) = ( 3.83 &#x00B1;<!-- ± --> 0.03 &#x00B1;<!-- ± --> 0.03 ) &#x00D7;<!-- × --> 10 &#x2212;<!-- - --> 2 , A C P ( B + &#x2192;<!-- → --> J / &#x03C8;<!-- ψ --> &#x03C0;<!-- π --> + ) &#x2212;<!-- - --> A C P ( B + &#x2192;<!-- → --> J / &#x03C8;<!-- ψ --> K + ) = ( 1.82 &#x00B1;<!-- ± --> 0.86 &#x00B1;<!-- ± --> 0.14 ) &#x00D7;<!-- × --> 10 &#x2212;<!-- - --> 2 , where the first uncertainties are statistical and the second are systematic. Combining this result with a recent LHCb measurement of $A^{CP}$ ($B^+$ → $J/ ψK^+$) provides the most precise estimate to date of $CP$ violation in the decay $B^+$ → $J/ψπ^+$, A C P ( B + &#x2192;<!-- → --> J / &#x03C8;<!-- ψ --> &#x03C0;<!-- π --> + ) = ( 1.91 &#x00B1;<!-- ± --> 0.89 &#x00B1;<!-- ± --> 0.16 ) &#x00D7;<!-- × --> 1 0 &#x2212;<!-- - --> 2 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Observation of the ${B}_s^0 $ → D*±D∓ decay

A search for the B 0 → D *± D ∓ decay is performed using proton-proton collision data at centre-of-mass energies of 7, 8 and 13 TeV collected by the LHCb experiment, corresponding to an integrated luminosity of 9 fb -1 . The decay is observed with a high significance and its branching fraction relative to the B 0 → D *± D ∓ decay is measured to be $\frac{\mathrm{\mathcal{B}}\left({B}_s^0\to {D}^{\ast \pm }{D}^{\mp}\right)}{\mathrm{\mathcal{B}}\left({B}^0\to {D}^{\ast \pm }{D}^{\mp}\right)}=0.137\pm 0.017\pm 0.002\pm 0.006$, where the first uncertainty is statistical, the second systematic and the third is due to the uncertainty on the ratio of the $B_{s}^{0}$ and $B^{0}$ hadronisation fractions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Searches for rare ${B}_s^0$ and $B^0$ decays into four muons

Searches for rare ${B}_s^0$ and $B^0$ decays into four muons are performed using proton-proton collision data recorded by the LHCb experiment, corresponding to an integrated luminosity of 9 fb –1 . Direct decays and decays via light scalar and $J/ψ$ resonances are considered. No evidence for the six decays searched for is found and upper limits at the 95% confidence level on their branching fractions ranging between 1.8 x 10 –10 and 2.6 x 10 –9 are set.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Model-independent measurement of mixing parameters in D 0 → K$^{0}_{S}$ π+π– decays

The first model-independent measurement of the charm mixing parameters in the decay D 0 → K$^{0}_{S}$ π+π– is reported, using a sample of pp collision data recorded by the LHCb experiment, corresponding to an integrated luminosity of 1.0 fb –1 at a centre-of-mass energy of 7 TeV. The measured values are x = (–0.86 ± 0.53 ± 0.17) x 10 –2 , y = (+0.03 ± 0.46 ± 0.13) x 10 –2 , where the first uncertainties are statistical and include small contributions due to the external input for the strong phase measured by the CLEO collaboration, and the second uncertainties are systematic.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗