Search NASA⌕ Search

SEARCH · Search NASA

Results for “LOGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Excitation Power Dependence Of Photoluminescence From GaAs Quantum Dot Prepared By Droplet Epitaxy Method

GaAs quantum dot (QD) was grown by droplet epitaxy (DE) method and the excitation power dependence of photoluminescence (PL) were carried out. To investigate the effect of annealing temperature on QDs optical properties, the two step RTA process was carried out in a various temperature range from 800 to 1000 deg. C. As the thermal annealing temperature increases, the PL peak position is blue-shifted due to the change of the composition and size distribution of QDs, and the highest PL intensity is observed at the sample annealed at 900 deg. C. The integrated PL intensity (I{sub PL}) is plotted against the excitation density in a log-log scale and the slope was calculated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Femtosecond laser diagnostics of the built-in electric field across the p{sup +}-Si/SiO{sub 2} interface and its ultrafast shielding

Ultrafast shielding of the built-in electric field E{sub 0} across the p{sup +}-Si/SiO{sub 2} interface of boron doped Si upon near infrared femtosecond (fs) laser pulse irradiation (73 {+-} 5 fs, 35 GW/cm{sup 2}{<=} I{sub peak}{sup ({omega})} {<=} 115 GW/cm{sup 2}) is shown to be dominated by electron-hole (e-h) pairs generated via two-photon absorption (TPA), whereas contributions from one-photon absorption (OPA) appear negligible. E{sub 0} shows up in the instantaneous signal I{sup (2{omega})}(t Almost-Equal-To 0) Almost-Equal-To I{sup (2{omega})}(E{sub 0}) of the Electric Field Induced Second Harmonic (EFISH). Its power law is derived from the linear log I{sup (2{omega})}(E{sub 0}) vs. log (I{sub peak}{sup ({omega})}){sup n} plots of six fs laser wavelengths 741.2 nm {<=} {lambda} {<=} 801.0 nm for the first time. These reveal 1.2 {<=} n({lambda}) {<=} 2.1 with the minimum at {lambda} = 752.4 nm (2h{nu} = 3.3 eV) related to resonantly enhanced TPA. Shielding of E{sub 0} by e-h pairs from OPA cannot be detected by EFISH in the same fs laser pulse as their generation requires relatively slow electron-phonon coupling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chaotic advection at large Péclet number: Electromagnetically driven experiments, numerical simulations, and theoretical predictions

We present a combination of experiment, theory, and modelling on laminar mixing at large Péclet number. The flow is produced by oscillating electromagnetic forces in a thin electrolytic fluid layer, leading to oscillating dipoles, quadrupoles, octopoles, and disordered flows. The numerical simulations are based on the Diffusive Strip Method (DSM) which was recently introduced (P. Meunier and E. Villermaux, “The diffusive strip method for scalar mixing in two-dimensions,” J. Fluid Mech. 662, 134–172 (2010)) to solve the advection-diffusion problem by combining Lagrangian techniques and theoretical modelling of the diffusion. Numerical simulations obtained with the DSM are in reasonable agreement with quantitative dye visualization experiments of the scalar fields. A theoretical model based on log-normal Probability Density Functions (PDFs) of stretching factors, characteristic of homogeneous turbulence in the Batchelor regime, allows to predict the PDFs of scalar in agreement with numerical and experimental results. This model also indicates that the PDFs of scalar are asymptotically close to log-normal at late stages, except for the large concentration levels which correspond to low stretching factors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Role of quantum confinement in luminescence efficiency of group IV nanostructures

Experimental results obtained previously for the photoluminescence efficiency (PL{sub eff}) of Ge quantum dots (QDs) are theoretically studied. A log-log plot of PL{sub eff} versus QD diameter (D) resulted in an identical slope for each Ge QD sample only when E{sub G}∼(D{sup 2}+D){sup −1}. We identified that above D ≈ 6.2 nm: E{sub G}∼D{sup −1} due to a changing effective mass (EM), while below D ≈ 4.6 nm: E{sub G}∼D{sup −2} due to electron/hole confinement. We propose that as the QD size is initially reduced, the EM is reduced, which increases the Bohr radius and interface scattering until eventually pure quantum confinement effects dominate at small D.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Upconversion and pump saturation mechanisms in Er{sup 3+}/Yb{sup 3+} co-doped Y{sub 2}Ti{sub 2}O{sub 7} nanocrystals

The Er{sup 3+}/Yb{sup 3+} co-doped Y{sub 2}Ti{sub 2}O{sub 7} nanocrystals were synthesized by the sol–gel method. X-ray diffraction, transmission electronic microscopy, and photoluminescence spectra were measured to verify the Y{sub 2}Ti{sub 2}O{sub 7} nanocrystalline produced in the sample annealed at 800 °C. The anomalous slopes of the fitted line in the log-log plots for upconversion emissions and the pump-saturation effect of near-infrared emission were observed in the nanocrystalline samples. A theoretical model of practical Er{sup 3+}/Yb{sup 3+} co-doped system based on the rate equations were put forward and explained the experimental phenomena well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamics of gas phase Ne{sup *} + NH{sub 3} and Ne{sup *} + ND{sub 3} Penning ionisation at low temperatures

Two isotopic chemical reactions, Ne{sup *} + NH{sub 3}, and Ne{sup *} + ND{sub 3}, have been studied at low collision energies by means of a merged beams technique. Partial cross sections have been recorded for the two reactive channels, namely, Ne{sup *} + NH{sub 3} → Ne + NH{sub 3}{sup +} + e{sup −}, and Ne{sup *} + NH{sub 3} → Ne + NH{sub 2}{sup +}+ H + e{sup −}, by detecting the NH{sub 3}{sup +} and NH{sub 2}{sup +} product ions, respectively. The cross sections for both reactions were found to increase with decreasing collision energy, E{sub coll}, in the range 8 μeV < E{sub coll} < 20 meV. The measured rate constant exhibits a curvature in a log(k)-log(E{sub coll}) plot from which it is concluded that the Langevin capture model does not properly describe the Ne{sup *} + NH{sub 3} reaction in the entire range of collision energies covered here. Calculations based on multichannel quantum defect theory were performed to reproduce and interpret the experimental results. Good agreement was obtained by including long range van der Waals interactions combined with a 6-12 Lennard-Jones potential. The branching ratio between the two reactive channels, Γ=([NH{sub 2}{sup +}])/([NH{sub 2}{sup +}]+[NH{sub 3}{sup +}]) , is relatively constant, Γ ≈ 0.3, in the entire collision energy range studied here. Possible reasons for this observation are discussed and rationalized in terms of relative time scales of the reactant approach and the molecular rotation. Isotopic differences between the Ne{sup *} + NH{sub 3} and Ne{sup *} + ND{sub 3} reactions are small, as suggested by nearly equal branching ratios and cross sections for the two reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Accuracy of maximum likelihood estimates of a two-state model in single-molecule FRET

Photon sequences from single-molecule Förster resonance energy transfer (FRET) experiments can be analyzed using a maximum likelihood method. Parameters of the underlying kinetic model (FRET efficiencies of the states and transition rates between conformational states) are obtained by maximizing the appropriate likelihood function. In addition, the errors (uncertainties) of the extracted parameters can be obtained from the curvature of the likelihood function at the maximum. We study the standard deviations of the parameters of a two-state model obtained from photon sequences with recorded colors and arrival times. The standard deviations can be obtained analytically in a special case when the FRET efficiencies of the states are 0 and 1 and in the limiting cases of fast and slow conformational dynamics. These results are compared with the results of numerical simulations. The accuracy and, therefore, the ability to predict model parameters depend on how fast the transition rates are compared to the photon count rate. In the limit of slow transitions, the key parameters that determine the accuracy are the number of transitions between the states and the number of independent photon sequences. In the fast transition limit, the accuracy is determined by the small fraction of photons that are correlated with their neighbors. The relative standard deviation of the relaxation rate has a “chevron” shape as a function of the transition rate in the log-log scale. The location of the minimum of this function dramatically depends on how well the FRET efficiencies of the states are separated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparison of different moment-closure approximations for stochastic chemical kinetics

In recent years, moment-closure approximations (MAs) of the chemical master equation have become a popular method for the study of stochastic effects in chemical reaction systems. Several different MA methods have been proposed and applied in the literature, but it remains unclear how they perform with respect to each other. In this paper, we study the normal, Poisson, log-normal, and central-moment-neglect MAs by applying them to understand the stochastic properties of chemical systems whose deterministic rate equations show the properties of bistability, ultrasensitivity, and oscillatory behaviour. Our results suggest that the normal MA is favourable over the other studied MAs. In particular, we found that (i) the size of the region of parameter space where a closure gives physically meaningful results, e.g., positive mean and variance, is considerably larger for the normal closure than for the other three closures, (ii) the accuracy of the predictions of the four closures (relative to simulations using the stochastic simulation algorithm) is comparable in those regions of parameter space where all closures give physically meaningful results, and (iii) the Poisson and log-normal MAs are not uniquely defined for systems involving conservation laws in molecule numbers. We also describe the new software package MOCA which enables the automated numerical analysis of various MA methods in a graphical user interface and which was used to perform the comparative analysis presented in this paper. MOCA allows the user to develop novel closure methods and can treat polynomial, non-polynomial, as well as time-dependent propensity functions, thus being applicable to virtually any chemical reaction system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Fe doping on structural and impedance properties of PZTFN ceramics

An attempts have been made to synthesis the ceramics Pb{sub 1-3x/2} Fe{sub x}(Zr{sub 0.52}Ti{sub 0.48}){sub 1-5y/4} NbyO{sub 3} abbreviated as (PFZTN) for x = 1-6 mol% and y = 5.5 mol% by a semi-wet route. In the present paper, we have investigated the effect of Fe doping on structural and electrical properties of the PFZTN ceramics. X-ray diffraction (XRD) patterns reveal that PFZTN ceramics are single phase in nature. However, for x = 0.05 and 0.06, a secondary phase appears as discernible from the XRD profiles. Rietveld analysis of the powder diffraction data shows the presence of coexistence of tetragonal (P4mm space group) and rhombohedral phases (R3c space group) occurs near the morphotropic phase boundary (MPB) at x ≥ = 0.05. The log-log plots show that the conductivity increases with increase of temperature. The ac conductivity becomes sensitive at high frequency region and shifted towards higher frequency side with increasing temperature. It is observed that the activation energy (Ea) decreases with increasing frequency. This complex perovskite structure can be used as a multilayer ceramic capacitors and electromechanical transducers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Facile method for liquid-exfoliated graphene size prediction by UV-visible spectroscopy

In this work, an application of UV spectroscopy for facile prediction of liquid –exfoliated graphene size is discussed. Dynamic light scattering method was used to estimate the graphene flake size ( whilst UV spectroscopy measurement was carried out for extinction coefficient value (ε) determination. It was found that the value of (ε) decreased gradually as the graphene size was further reduced after intense sonication time (7h). This observation showed the influence of sonication time on electronic structure of graphene. A mathematical equation was derived from log-log graph for correlation between ( ) and (ε) value. Both values can be expressed in a single equation as ( = (3.4 × 10{sup −2}) ε{sup 1.2}).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Design and implementation of wireless dose logger network for radiological emergency decision support system

A decision support system (DSS) is implemented in Radiological Safety Division, Indira Gandhi Centre for Atomic Research for providing guidance for emergency decision making in case of an inadvertent nuclear accident. Real time gamma dose rate measurement around the stack is used for estimating the radioactive release rate (source term) by using inverse calculation. Wireless gamma dose logging network is designed, implemented, and installed around the Madras Atomic Power Station reactor stack to continuously acquire the environmental gamma dose rate and the details are presented in the paper. The network uses XBee–Pro wireless modules and PSoC controller for wireless interfacing, and the data are logged at the base station. A LabView based program is developed to receive the data, display it on the Google Map, plot the data over the time scale, and register the data in a file to share with DSS software. The DSS at the base station evaluates the real time source term to assess radiation impact.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

GMI in the reentrant spin-glass Fe 90 Zr 10 alloy: Investigation of the spin dynamics in the MHz frequency regime

Giant magnetoimpedance (GMI) in the reentrant spin-glass (SG) phase of ferromagnetic Fe 90 Zr 10 is reported. The temperature (T) dependence of the GMI allows the investigation of the spin dynamics in the SG phase in the MHz frequency regime and thus very short relaxation times τ (~10 -8 s). The GMI shows a broad maximum around 150 K and diminishes with decreasing T below the glass temperature T g of 15 K. The magnetic permeability data obtained from the GMI data show the general features observed in the ac magnetic susceptibility measured at lower frequencies (10 ≤ f ≤ 10 4 Hz), yielding values of T f (=T g (f)) that allow testing the validity of the power-law scaling used for describing the dynamics of SG-phases up to 15 MHz. A log-log plot of τ (=1/f) versus the reduced critical temperature shows two distinct regimes in the time-domain: (1) a critical slowing-down is observed for values τ > 3 × 10 -3 s; and (2) for 7 × 10 -8 ≤ τ ≤ 3 × 10 -3 s. In the latter case a fitting to the power-law yields the value 7.4 for the product of the critical exponents zν, and 1.6 × 10 -7 s for the microscopic relaxation time τ 0 . In conclusion, the product of the exponents is appropriate for an Ising spin glass.

36 MATERIALS SCIENCE↗

Minimax rational approximation of the Fermi-Dirac distribution

Accurate rational approximations of the Fermi-Dirac distribution are a useful component in many numerical algorithms for electronic structure calculations. The best known approximations use O(log(βΔ)log(ϵ –1 )) poles to achieve an error tolerance ϵ at temperature β –1 over an energy interval Δ. We apply minimax approximation to reduce the number of poles by a factor of four and replace Δ with Δ occ , the occupied energy interval. Furthermore, this is particularly beneficial when Δ >> Δ occ , such as in electronic structure calculations that use a large basis set.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unitary circuit synthesis for tomography of generalized coherent states

We present a method that outputs a sequence of simple unitary operations to prepare a given quantum state that is a generalized coherent state. Our method takes as inputs the expectation values of some relevant observables. Such expectations can be estimated by performing projective measurements on $\mathcal{O}$(M 3 log(M/δ)/ε 2 ) copies of the state, where M is the dimension of an associated Lie algebra, ε is a precision parameter, and 1 - δ is the required confidence level. The method can be implemented on a classical computer and runs in time $\mathcal{O}$(M 4 log(M/ε)). It provides $\mathcal{O}$(Mlog(M/ε)) simple unitaries that form the sequence. The overall complexity is then polynomial in M, being very efficient in cases where M is significantly smaller than the Hilbert space dimension, as for some fermion algebras. When the algebra of relevant observables is given by certain Pauli matrices, each simple unitary may be easily decomposed into two-qubit gates. We discuss applications to efficient quantum state tomography and classical simulations of quantum circuits. $\mathcal{O}$

97 MATHEMATICS AND COMPUTING↗

Prediction of stability constants of metal–ligand complexes by machine learning for the design of ligands with optimal metal ion selectivity

The new LOGKPREDICT program integrates HostDesigner molecular design software with the machine learning (ML) program Chemprop. By supplying HostDesigner with predicted log K values, LOGKPREDICT enhances the computer-aided molecular design process by ranking ligands directly by metal–ligand binding strength. Harnessing reliable experimental data from a historic National Institute of Standards and Technology (NIST) database and data from the International Union of Pure and Applied Chemistry (IUPAC), we train message passing neural net algorithms. The multi-metal NIST-based ML model has a root mean square error (RMSE) of 0.629 ± 0.044 (R 2 of 0.960 ± 0.006), while two versions of lanthanide-only IUPAC-based ML models have, respectively, RMSE of 0.764 ± 0.073 (R 2 of 0.976 ± 0.005) and 0.757 ± 0.071 (R 2 of 0.959 ± 0.007). For relative log K predictions on an out-of-sample set of six ligands, demonstrating metal ion selectivity, the RMSE value reaches a commendably low 0.25. Here we showcase the use of LOGKPREDICT in identifying ligands with high selectivity for lanthanides in aqueous solutions, a finding supported by recent experimental evidence. We also predict new ligands yet to be verified experimentally. Therefore, our ML models implemented through LOGKPREDICT and interfaced with the ligand design software HostDesigner pave the way for designing new ligands with predetermined selectivity for competing metal ions in an aqueous solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiscale Flow for robust and optimal cosmological analysis

We propose Multiscale Flow, a generative Normalizing Flow that creates samples and models the field-level likelihood of two-dimensional cosmological data such as weak lensing. Multiscale Flow uses hierarchical decomposition of cosmological fields via a wavelet basis and then models different wavelet components separately as Normalizing Flows. The log-likelihood of the original cosmological field can be recovered by summing over the log-likelihood of each wavelet term. This decomposition allows us to separate the information from different scales and identify distribution shifts in the data such as unknown scale-dependent systematics. The resulting likelihood analysis can not only identify these types of systematics, but can also be made optimal, in the sense that the Multiscale Flow can learn the full likelihood at the field without any dimensionality reduction. We apply Multiscale Flow to weak lensing mock datasets for cosmological inference and show that it significantly outperforms traditional summary statistics such as power spectrum and peak counts, as well as machine learning–based summary statistics such as scattering transform and convolutional neural networks. We further show that Multiscale Flow is able to identify distribution shifts not in the training data such as baryonic effects. Finally, we demonstrate that Multiscale Flow can be used to generate realistic samples of weak lensing data.

79 ASTRONOMY AND ASTROPHYSICS↗

Simple guanidinium motif for the selective binding and extraction of sulfate

A simple bidentate anion receptor, shown previously to adopt a rigid pseudobicyclic conformation while binding anions in the solid state, selectively binds sulfate in aqueous solutions with log K 1 and log K 2 values of 3.78 ± 0.12 M-1 and 2.10 ± 0.23 M-1, respectively. This anion receptor has little to no affinity for nitrate and chloride in the same solutions. A lipophilic derivative was synthesized in four steps to yield an extractant that is capable of partitioning sulfate into 1,2 dichloroethane from water in the presence of large excesses of chloride. This extractant demonstrated D values as high as 2.5 with only 30 mM of anion receptor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impact of Sequential Ammonia Fiber Expansion (AFEX) Pretreatment and Pelletization on the Moisture Sorption Properties of Corn Stover

Combining ammonia fiber expansion (AFEX™) pretreatment with a depot processing facility is a promising option for delivering high-value densified biomass to the emerging bioenergy industry. However, because the pretreatment process results in a high moisture material unsuitable for pelleting or storage (40% wet basis), the biomass must be immediately dried. If AFEX pretreatment results in a material that is difficult to dry, the economics of this already costly operation would be at risk. This work tests the nature of moisture sorption isotherms and thin-layer drying behavior of corn (Zea mays L.) stover at 20°C to 60°C before and after sequential AFEX pretreatment and pelletization to determine whether any negative impacts to material drying or storage may result from the AFEX process. The equilibrium moisture content to equilibrium relative humidity relationship for each of the materials was determined using dynamic vapor sorption isotherms and modeled with modified Chung-Pfost, modified Halsey, and modified Henderson temperature-dependent models as well as the Double Log Polynomial (DLP), Peleg, and Guggenheim Anderson de Boer (GAB) temperature-independent models. Drying kinetics were quantified under thin-layer laboratory testing and modeled using the Modified Page's equation. Water activity isotherms for non-pelleted biomass were best modeled with the Peleg temperature-independent equation while isotherms for the pelleted biomass were best modeled with the Double Log Polynomial equation. Thin-layer drying results were accurately modeled with the Modified Page's equation. The results of this work indicate that AFEX pretreatment results in drying properties more favorable than or equal to that of raw corn stover, and pellets of superior physical stability in storage.

09 BIOMASS FUELS↗