Search NASA⌕ Search

SEARCH · Search NASA

Results for “Level density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Strain effect on the electronic density of states and dc conductivity of disordered binary alloys

A single-band model calculation is developed for the effect of strain on the temperature variation of the electronic density of states and the electrical onductivity of disordered binary alloys. Experimentally, strain has only a small effect on the temperature variation of the conductivity. Shifts in the Fermi level and distortions of the density of states under different strains are found from the calculations. The small change in the temperature variation of conductivity under strain is a result of competition between these two effects. Methods to extract physical parameters characterizing alloys from measurements of the strain and temperature variation of the resistivity are discussed. Suggestions are also made about materials-selection criteria for strain-gauge applications.

Hwang, H.-C.↗

THE EFFECT OF RADIATION PRESSURE ON EMISSION-LINE PROFILES AND BLACK HOLE MASS DETERMINATION IN ACTIVE GALACTIC NUCLEI

We present a new analysis of the motion of pressure-confined, broad-line region (BLR) clouds in active galactic nuclei (AGNs) taking into account the combined influence of gravity and radiation pressure. We calculate cloud orbits under a large range of conditions and include the effect of column density variation as a function of location. The dependence of radiation pressure force on the level of ionization and the column density are accurately computed. The main results are as follows. (1) The mean cloud locations (r{sub BLR}) and line widths (FWHMs) are combined in such a way that the simple virial mass estimate, r{sub BLR}, FWHM{sup 2}/G, gives a reasonable approximation to M{sub BH} even when radiation pressure force is important. The reason is that L/M rather than L is the main parameter affecting the planar cloud motion. (2) Reproducing the mean observed r{sub BLR}, FWHM, and line intensity of H{beta} and C IV {lambda}1549 requires at least two different populations of clouds. (3) The cloud location is a function of both L {sup 1/2} and L/M. Given this, we suggest a new approximation for r{sub BLR} which, when inserted into the BH mass equation, results in a new approximation for M{sub BH}. The new expression involves L {sup 1/2}, FWHM, and two constants that are obtained from a comparison with available M-{sigma}* mass estimates. It deviates only slightly from the old mass estimate at all luminosities. (4) The quality of the present black hole mass estimators depends, critically, on the way the present M-{sigma}* AGN sample (29 objects) represents the overall population, in particular the distribution of L/L{sub Edd}.

79 ASTRONOMY AND ASTROPHYSICS↗

Multiple gravity-wave breaking levels

Gravity waves for which the expression /u(bar)-c/, where u(bar) = mean flow speed and c = wave phase speed, exhibits a sharp minimum in the upper troposphere or lower stratosphere, have decaying amplitudes above this level despite their exponentially decreasing mean density; this decay then ceases and growth resumes. If a gravity wave breaks below the level of /u(bar)-c/min, it will cease breaking above this level, while resuming breaking at some higher, second level which is a lower bound for the level of breaking in the mesosphere. Explicit calculations show the second breaking levels to be close to observed levels of mesospheric gravity wave breaking.

Lindzen, R. S.↗

Recovery Act: A Measurement -- Management Technology for Improving Energy Efficiency in Data Centers and Telecommunication Facilities (Final Technical Report)

Data center (DC) electricity use is increasing at an annual rate of over 20% and presents a concern for the Information Technology (IT) industry, governments, and the society. A large fraction of the energy use is consumed by the compressor cooling to maintain the recommended operating conditions for IT equipment. The most common way to improve the DC efficiency is achieved by optimally provisioning the cooling power to match the global heat dissipation in the DC. However, at a more granular level, the large range of heat densities of today's IT equipment makes the task of provisioning cooling power optimized to the level of individual computer room air conditioning (CRAC) units much more challenging. Distributed sensing within a DC enables the development of new strategies to improve energy efficiency, such as hot spot elimination through targeted cooling, matching power consumption at rack level with workload schedule, and minimizing power losses. The scope of Measurement and Management Technologies (MMT) is to develop a software tool and the underlying sensing technology to provide critical decision support and control for DC and telecommunication facilities (TF) operations. A key aspect of MMT technology is integration of modeling tools to understand how changes in one operational parameter affect the overall DC response. It is demonstrated that reduced ordered models for DC can generate, in less than 2 seconds computational time, a three dimensional thermal model in a 50 kft 2 DC. This rapid modeling enables real time visualization of the DC conditions and enables "0what if" scenarios simulations to characterize response to "disturbances". One such example is thermal zone modeling that matches the cooling power to the heat generated at a local level by identifying DC zones cooled by a specific CRAC. Turning off a CRAC unit can be simulated to understand how the other CRAC utilization changes and how server temperature responds. Several new sensing technologies were added to the existing MMT platform: (1) air contamination (corrosion) sensors, (2) power monitoring, and (3) a wireless environmental sensing network. All three technologies are built on cost effective sensing solutions that increase the density of sensing points and enable high resolution mapping of DCs. The wireless sensing solution enables Air Conditioning Unit (ACU) control while the corrosion sensor enables air side economization and can quantify the risk of IT equipment failure due to air contamination. Validation data for six test sites demonstrate that leveraging MMT energy efficiency solutions combined with industry best practices results in an average of 20% reduction in cooling energy, without major infrastructure upgrades. As an illustration of the unique MMT capabilities, a data center infrastructure efficiency (DCIE) of 87% (industry best operation) was achieved. The technology is commercialized through IBM System and Technology Lab Services that offers MMT as a solution to improve DC energy efficiency. Estimation indicates that deploying MMT in existing DCs can results in an 8 billion kWh savings and projection indicates that constant adoption of MMT can results in obtainable savings of 44 billion kWh in 2035. Negotiations are under way with business partners to commercialize/license the ACU control technology and the new sensor solutions (corrosion and power sensing) to enable third party vendors and developers to leverage the energy efficiency solutions.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Superconductivity in dense carbon-based materials

Guided by a simple strategy in searching of new superconducting materials we predict that high temperature superconductivity can be realized in classes of high-density materials having strong sp 3 chemical bonding and high lattice symmetry. Here, we examine in detail sodalite carbon frameworks doped with simple metals such as Li, Na, and Al. Though such materials share some common features with doped diamond, their doping level is not limited and the density of states at the Fermi level in them can be as high as that in the renowned MgB 2 . Altogether, with other factors, this boosts the superconducting temperature (T c ) in the materials investigated to higher levels compared to doped diamond. For example, the superconducting T c of sodalite-like NaC 6 is predicted to be above 100 K. This phase and a series of other sodalite-based superconductors are predicted to be metastable phases but are dynamically stable. In owing to the rigid carbon framework of these and related dense carbon-materials, these doped sodalite-based structures could be recoverable as potentially useful superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of angular-momentum-changing collisions on dielectronic satellite spectra

A generalization of the low-density corona-model theory of the intensities of satellite lines of the resonance lines emitted by multiply charged helium-like ions in the X-ray spectra of high-temperature plasmas is developed in order to take account of electron collisional transitions between close autoionizing levels. A formalism for determining the population densities of the autoionizing levels and the satellite line intensities is presented, and the quantum mechanical calculation of autoionization, radiative decay and electron-induced collisional transitions is discussed. Generalized emission rate coefficients corresponding to dielectronic recombination and inner-shell-electron collisional excitation are tabulated as functions of electron density and temperature. The procedure is then used to illustrate the effects of angular-momentum-changing electron collisions on the intensities of the satellites of the 1s2p 1P to 1s2 1S resonance line of the ions Al XII and Si XIII. It is concluded that the collisional transitions have their most significant effect on the intensities of satellite transitions from metastable autoionizing states, which may be useful in determining plasma densities.

Jacobs, V. L.↗

Hard x-ray photoelectron spectroscopy study of Ge{sub 2}Sb{sub 2}Te{sub 5}; as-deposited amorphous, crystalline, and laser-reamorphized

We have investigated the electronic structure of as-deposited, crystalline, and laser-reamorphized Ge{sub 2}Sb{sub 2}Te{sub 5} using high resolution, hard x-ray photoemission spectroscopy. A shift in the Fermi level as well as a broadening of the spectral features in the valence band and the Ge 3d level between the amorphous and crystalline state is observed. Upon amorphization, Ge 3d and Sb 4d spectra show a surprisingly small breaking of resonant bonds and changes in the bonding character as evidenced by the very similar density of states in all cases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Climatically driven changes in primary production propagate through trophic levels

Abstract Climate and land‐use change are the major drivers of global biodiversity loss. Their effects are particularly acute for wide‐ranging consumers, but little is known about how these factors interact to affect the abundance of large carnivores and their herbivore prey. We analyzed population densities of a primary and secondary consumer (mule deer, Odocoileus hemionus , and mountain lion, Puma concolor ) across a climatic gradient in western North America by combining satellite‐based maps of plant productivity with estimates of animal abundance and foraging area derived from Global Positioning Systems telemetry data (GPS). Mule deer density exhibited a positive, linear relationship with plant productivity ( r 2 = 0.58), varying by a factor of 18 across the climate‐vegetation gradient (range: 38–697 individuals/100 km 2 ). Mountain lion home range size decreased in response to increasing primary productivity and consequent changes in the abundance of their herbivore prey (range: 20–450 km 2 ). This pattern resulted in a strong, positive association between plant productivity and mountain lion density ( r 2 = 0.67). Despite varying densities, the ratio of prey to predator remained constant across the climatic gradient (mean ± SE = 363 ± 29 mule deer/mountain lion), suggesting that the determinacy of the effect of primary productivity on consumer density was conserved across trophic levels. As droughts and longer term climate changes reduce the suitability of marginal habitats, consumer home ranges will expand in order for individuals to meet basic nutritional requirements. These changes portend decreases in the abundance of large‐bodied, wide‐ranging wildlife through climatically driven reductions in carrying capacity, as well as increased human–wildlife interactions stemming from anthropogenic land use and habitat fragmentation.

Stoner, David C.↗

Vector fields and Loop Quantum Cosmology

In the context of the Loop Quantum Cosmology we have analysed the holonomy correction to the classical evolution of the simplified Bianchi I model in the presence of vector fields. For the Universe dominated by a massive vector field or by a combination of a scalar field and a vector field a smooth transition between Kasner-like and Kasner-unlike solutions for a Bianchi I model has been demonstrated. In this case a lack of initial curvature singularity and a finite maximal energy density appear already at the level of General Relativity, which simulates a classical Big Bounce.

79 ASTRONOMY AND ASTROPHYSICS↗

Atomic data and spectral line intensities for Ca XVII

Electron impact collision strengths, energy levels, oscillator strengths, and spontaneous radiative decay rates are calculated for Ca XVII. The configurations used are 2s{sup 2}, 2s2p, 2p{sup 2}, 2l3l{sup '}, 2l4l{sup '} and 2s5l{sup '}, with l=s,p, and l{sup '}=s,p,d giving rise to 92 fine-structure levels in intermediate coupling. Collision strengths are calculated at seven incident energies (15, 30, 75, 112.5, 150, 187.5 and 225 Ry) for the transitions within the three lowest configurations corresponding to the 10 lowest energy levels, and at five incident energies (75, 112.5, 150, 187.5 and 225 Ry) for transitions between the lowest five levels and the n=3,4,5 configurations. Calculations have been carried out using the distorted wave approximation. Excitation rate coefficients are calculated as a function of electron temperature by assuming a Maxwellian electron velocity distribution. Using the excitation rate coefficients and the radiative transition rates of the present work, and R-Matrix results for the 2s{sup 2}, 2s2p, 2p{sup 2} configurations available in the literature, statistical equilibrium equations for level populations are solved at electron densities covering the range of 10{sup 8}-10{sup 14}cm{sup -3} at an electron temperature of logT{sub e}(K)=6.7, corresponding to the maximum abundance of Ca XVII. Spectral line intensities are calculated, and their diagnostic relevance is discussed. This dataset will be made available in the next version of the CHIANTI database.

74 ATOMIC AND MOLECULAR PHYSICS↗

Atomic data and spectral line intensities for Ni XI

Electron impact collision strengths, energy levels, oscillator strengths, and spontaneous radiative decay rates are calculated for Ni XI. We include in the calculations the 12 lowest configurations, corresponding to 180 fine-structure levels: 3s{sup 2}3p{sup 6}, s{sup 2}3p{sup 5}3d, 3s{sup 2}3p{sup 4}3d{sup 2}, 3s3p{sup 6}3d, 3s{sup 2}3p{sup 5}4l, and 3s3p{sup 6}4l with l = s, p, d, f. Collision strengths are calculated at five incident energies for all transitions: 7.45, 17.6, 31.4, 50.1, and 75.2 Ry above the threshold of each transition. An additional energy, very close to the transition threshold, has been added, whose value is between 0.0007 Ry and 0.25 Ry depending on the levels involved. Calculations have been carried out using the Flexible Atomic Code. The scattering problem is solved in the distorted wave approximation. Excitation rate coefficients are calculated as a function of electron temperature by assuming a Maxwellian electron velocity distribution. Using the excitation rate coefficients and the radiative transition rates of the present work, combined with close coupling collision excitation rate coefficients available in the literature for the lowest 17 levels, statistical equilibrium equations for level populations are solved at electron densities covering the range of 10{sup 8}-10{sup 14} cm{sup -3} and at an electron temperature of logT{sub e}K=6.1, corresponding to the maximum abundance of Ni XI. Spectral line intensities are calculated, and their diagnostic relevance is discussed. This dataset will be made available in the next version of the CHIANTI database.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

An ABCA1 truncation shows no dominant negative effect in a familial hypoalphalipoproteinemia pedigree with three ABCA1 mutations

Highlights: {yields} Characterisation of an ABCA1 truncation mutant, C978fsX988, in a pedigree with three ABCA1 mutations. {yields} Functional analysis of C978fsX988 in patient fibroblasts and HEK 293 cells shows no cholesterol efflux function. {yields} Allele-specific quantification shows C978fsX988 not expressed at mRNA level in fibroblasts. {yields} Unlike other ABCA1 truncations, C978fsX988 mutant shows no dominant negative effect at mRNA or protein level. -- Abstract: The ATP binding cassette transporter (ABCA1) A1 is a key determinant of circulating high density lipoprotein cholesterol (HDL-C) levels. Mutations in ABCA1 are a major genetic contributor to low HDL-C levels within the general population. Following the finding of three different ABCA1 mutations, p.C978fsX988, p.T1512M and p.N1800H in a subject with hypoalphalipoproteinemia, we aimed to establish whether the p.C978fsX988 truncation exerted a dominant negative effect on the full-length ABCA1 alleles within family members as has been reported for other ABCA1 truncations. Characterisation of the p.C978fsX988 mutant in transfected HEK 293 cells showed it to be expressed as a GFP fusion protein but lacking in cholesterol efflux function. This was in keeping with results from cholesterol efflux assays in the fibroblasts of p.C978fsX988 carriers which also showed impaired efflux. Allele- specific quantification of p.C978fsX988 mRNA and analysis of ABCA1 protein levels in the fibroblasts of p.C978fsX988 heterozygotes showed negligible levels of mRNA and protein expression. There was no evidence of a dominant negative effect on wildtype or p.N1800H protein levels. We conclude that in the case of the p.C978fsX988 truncated mutant a lack of expression precludes it from having a dominant negative effect.

60 APPLIED LIFE SCIENCES↗

An Equation of State for the Thermodynamic Properties of Cyclohexane

An equation of state for cyclohexane has been developed using the Helmholtz energy as the fundamental property with independent variables of density and temperature. Multi-property fitting technology was used to fit the equation of state to data for pρT, heat capacities, sound speeds, virial coefficients, vapor pressures, and saturated densities. The equation of state was developed to conform to the Maxwell criteria for two-phase vapor-liquid equilibrium states, and is valid from the triple-point temperature to 700 K, with pressures up to 250 MPa and densities up to 10.3 mol dm{sup −3}. In general, the uncertainties (k = 2, indicating a level of confidence of 95%) in density for the equation of state are 0.1% (liquid and vapor) up to 500 K, and 0.2% above 500 K, with higher uncertainties within the critical region. Between 283 and 473 K with pressures lower than 30 MPa, the uncertainty is as low as 0.03% in density in the liquid phase. The uncertainties in the speed of sound are 0.2% between 283 and 323 K in the liquid, and 1% elsewhere. Other uncertainties are 0.05% in vapor pressure and 2% in heat capacities. The behavior of the equation of state is reasonable within the region of validity and at higher and lower temperatures and pressures. A detailed analysis has been performed in this article.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The intact capture of hypervelocity dust particles using underdense foams

The impact of a hypervelocity projectile (greater than 3 km/s) is a process that subjects both the impactor and the impacted material to a large transient pressure distribution. The resultant stresses cause a large degree of fragmentation, melting, vaporization, and ionization (for normal densities). The pressure regime magnitude, however, is directly related to the density relationship between the projectile and target materials. As a consequence, a high-density impactor on a low-density target will experience the lowest level of damage. Historically, there have been three different approaches toward achieving the lowest possible target density. The first employs a projectile impinging on a foil or film of moderate density, but whose thickness is much less than the particle diameter. This results in the particle experiencing a pressure transient with both a short duration and a greatly reduced destructive effect. A succession of these films, spaced to allow nondestructive energy dissipation between impacts, will reduce the impactor's kinetic energy without allowing its internal energy to rise to the point where destruction of the projectile mass will occur. An added advantage to this method is that it yields the possibility of regions within the captured particle where a minimum of thermal modification has taken place. Polymer foams have been employed as the primary method of capturing particles with minimum degradation. The manufacture of extremely low bulk density materials is usually achieved by the introduction of voids into the material base. It must be noted, however, that a foam structure only has a true bulk density of the mixture at sizes much larger than the cell size, since for impact processes this is of paramount importance. The scale at which the bulk density must still be close to that of the mixture is approximately equal to the impactor. When this density criterion is met, shock pressures during impact are minimized, which in turn maximizes the probability of survival for the impacting particle. The primary objectives of the experiment are to (1) Examine the morphology of primary and secondary hypervelocity impact craters. Primary attention will be paid to craters caused by ejecta during hypervelocity impacts of different substrates. (2) Determine the size distribution of ejecta by means of witness plates and collect fragments of ejecta from craters by means of momentum-sensitive mcropore foam. (3) Assess the directionality of the flux by means of penetration-hole alignment of thin films placed above the cells. (4) Capture intact the particles that perforated the thin film and entered the cell. Capture media consisted of both previously flight-tested micropore foams and aerogel. The foams had different latent heats of fusion and, accordingly, will capture particles over a range of momenta. Aerogel was incorporated into the cells to determine the minimum diameter than can be captured intact.

Maag, Carl R.↗

Melt Pool characteristics on surface roughness and printability of 316L stainless steel in laser powder bed fusion

Purpose Surface quality and porosity significantly influence the structural and functional properties of the final product. This study aims to establish and explain the underlying relationships among processing parameters, top surface roughness and porosity level in additively manufactured 316L stainless steel. Design/methodology/approach A systematic variation of printing process parameters was conducted to print cubic samples based on laser power, speed and their combinations of energy density. Melt pool morphologies and dimensions, surface roughness quantified by arithmetic mean height (Sa) and porosity levels were characterized via optical confocal microscopy. Findings The study reveals that the laser power required to achieve optimal top surface quality increases with the volumetric energy density (VED) levels. A smooth top surface (Sa < 15 µm) or a rough surface with humps at high VEDs (VED > 133.3 J/mm 3 ) can serve as indicators for fully dense bulk samples, while rough top surfaces resulting from melt pool discontinuity correlate with high porosity levels. Under insufficient VED, melt pool discontinuity dominates the top surface. At high VEDs, surface quality improves with increased power as mitigation of melt pool discontinuity, followed by the deterioration with hump formation. Originality/value This study reveals and summarizes the formation mechanism of dominant features on top surface features and offers a potential method to predict the porosity by observing the top surface features with consideration of processing conditions.

Engineering↗

Chemical bonding in hydrogen and lithium under pressure

Though hydrogen and lithium have been assigned a common column of the periodic table, their crystalline states under common conditions are drastically different: the former at temperatures where it is crystalline is a molecular insulator, whereas the latter is a metal that takes on simple structures. On compression, however, the two come to share some structural and other similarities associated with the insulator-to-metal and metal-to-insulator transitions, respectively. To gain a deeper understanding of differences and parallels in the behaviors of compressed hydrogen and lithium, we performed an ab initio comparative study of these systems in selected identical structures. Both elements undergo a continuous pressure-induced s-p electronic transition, though this is at a much earlier stage of development for H. The valence charge density accumulates in interstitial regions in Li but not in H in structures examined over the same range of compression. Moreover, the valence charge density distributions or electron localization functions for the same arrangement of atoms mirror each other as one proceeds from one element to the other. Application of the virial theorem shows that the kinetic and potential energies jump across the first-order phase transitions in H and Li are opposite in sign because of non-local effects in the Li pseudopotential. Finally, the common tendency of compressed H and Li to adopt three-fold coordinated structures as found is explained by the fact that such structures are capable of yielding a profound pseudogap in the electronic densities of states at the Fermi level, thereby reducing the kinetic energy. These results have implications for the phase diagrams of these elements and also for the search for new structures with novel properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗