Search NASA⌕ Search

SEARCH · Search NASA

Results for “MONOCRYSTALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Single crystal silicon carbide detector of emitted ions and soft x rays from power laser-generated plasmas

A single-crystal silicon carbide (SiC) detector was used for measurements of soft x rays, electrons, and ion emission from laser-generated plasma obtained with the use of the Prague Asterix Laser System (PALS) at intensities of the order of 10{sup 16} W/cm{sup 2} and pulse duration of 300 ps. Measurements were performed by varying the laser intensity and the nature of the irradiated target. The spectra obtained by using the SiC detector show not only the photopeak due to UV and soft x-ray detection, but also various peaks due to the detection of energetic charged particles. Time-of-flight technique was employed to determine the ion kinetic energy of particles emitted from the plasma and to perform a comparison between SiC and traditional ion collectors. The detector was also employed by inserting absorber films of different thickness in front of the SiC surface in order to determine, as a first approximation, the mean energy of the soft x-ray emission from the plasma.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Hard x-ray response of pixellated CdZnTe detectors

In recent years, the development of cadmium zinc telluride (CdZnTe) detectors for x-ray and gamma ray spectrometry has grown rapidly. The good room temperature performance and the high spatial resolution of pixellated CdZnTe detectors make them very attractive in space-borne x-ray astronomy, mainly as focal plane detectors for the new generation of hard x-ray focusing telescopes. In this work, we investigated on the spectroscopic performance of two pixellated CdZnTe detectors coupled with a custom low noise and low power readout application specific integrated circuit (ASIC). The detectors (10x10x1 and 10x10x2 mm{sup 3} single crystals) have an anode layout based on an array of 256 pixels with a geometric pitch of 0.5 mm. The ASIC, fabricated in 0.8 mum BiCMOS technology, is equipped with eight independent channels (preamplifier and shaper) and characterized by low power consumption (0.5 mW/channel) and low noise (150-500 electrons rms). The spectroscopic results point out the good energy resolution of both detectors at room temperature [5.8% full width at half maximum (FWHM) at 59.5 keV for the 1 mm thick detector; 5.5% FWHM at 59.5 keV for the 2 mm thick detector) and low tailing in the measured spectra, confirming the single charge carrier sensing properties of the CdZnTe detectors equipped with a pixellated anode layout. Temperature measurements show optimum performance of the system (detector and electronics) at T=10 deg.C and performance degradation at lower temperatures. The detectors and the ASIC were developed by our collaboration as two small focal plane detector prototypes for hard x-ray multilayer telescopes operating in the 20-70 keV energy range.

36 MATERIALS SCIENCE↗

Thermoelectric transport properties of highly oriented FeSb{sub 2} thin films

Highly textured FeSb{sub 2} films were produced on quartz wafers by a sputtering method. Their resistivity and Seebeck coefficient (S) were measured and a maximum absolute value of Sapprox160 muV K{sup -1} at 50 K was obtained. Hall measurements were employed to study the charge carrier concentrations and Hall mobilities of the FeSb{sub 2} films. By comparing with the transport properties of FeSb{sub 2} single crystals and an extrinsically doped FeSb{sub 1.98}Te{sub 0.02} single crystal, the thermoelectric properties of the FeSb{sub 2} films are demonstrated to be dominated by the intrinsic properties of FeSb{sub 2} at a high charge carrier concentration.

36 MATERIALS SCIENCE↗

Photoexcited Individual Nanowires: Key Elements in Room Temperature Detection of Oxidizing Gases

Illuminating metal oxide semiconductors with ultra-violet light is a feasible alternative to activate chemical reactions at their surface and thus, using them as gas sensors without the necessity of heating them. Here, the response at room temperature of individual single-crystalline SnO{sub 2} nanowires towards NO{sub 2} is studied in detail. The results reveal that similar responses to those obtained with thermally activated sensors can be achieved by choosing the optimal illumination conditions. This finding paves the way to the development of conductometric gas sensors operated at room temperature. The power consumption in these devices is in range with conventional micromachined sensors.

36 MATERIALS SCIENCE↗

Specular electron scattering at single-crystal Cu(001) surfaces

Epitaxial copper layers, 20 nm to 1.5-{mu}m-thick, were grown on MgO(001) by ultrahigh vacuum magnetron sputter deposition at 80 deg. C. In situ electrical resistivity measurements indicate partial specular scattering at the Cu vacuum interface with a Fuchs-Sondheimer scattering parameter p=0.6{+-}0.1. In situ deposition of 0.3 to 7.0-nm-thick Ta cap layers on the Cu surfaces leads to a resistivity increase, which is independent of the Ta thickness and is associated with a transition to completely diffuse surface scattering with p=0.0{+-}0.1. The diffuse scattering is attributed to a 'rough' electron potential at the Cu-Ta interface as well as to scattering into localized interface and surface states.

36 MATERIALS SCIENCE↗

Single-Crystal-Like, c-axis Oriented BaTiO 3 Thin Films with High-Performance on Flexible Metal Templates for Ferroelectric Applications

Epitaxial, c-axis oriented BaTiO{sub 3} thin films were deposited using pulsed laser ablation on flexible, polycrystalline Ni alloy tape with biaxially textured oxide buffer multilayers. The high quality of epitaxial BaTiO{sub 3} thin films with P4mm group symmetry was confirmed by x-ray diffraction. The microscopic ferroelectric domain structure and the piezoelectric domain switching in these films were confirmed via spatially resolved piezoresponse mapping and local hysteresis loops. Macroscopic measurements demonstrate that the films have well-saturated hysteresis loops with a high remanent polarization of {approx} 11.5 {micro}C/cm{sup 2}. Such high-quality, single-crystal-like BaTiO{sub 3} films on low-cost, polycrystalline, flexible Ni alloy substrates are attractive for applications in flexible lead-free ferroelectric devices.

36 MATERIALS SCIENCE↗

Photoelectric effects of ultraviolet fast response and high sensitivity in LiNbO{sub 3} single crystal

The photoelectric effects in LiNbO{sub 3} (LNO) single crystal have been systematically studied with the two kinds of LNO wafers of tilt of 10 deg. and untilted at the ambient temperature. The ultrafast response photoelectric effect of 120 ps rise time was observed in 10 deg. tilted LNO single crystal with a 266 nm laser pulse of 25 ps duration. The photocurrent responsivity of untilted LNO with an interdigitated electrode of 10 mum finger width and 10 mum interspacing is 17.1 mA/W under the irradiation of 300 nm wavelength UV light at 10 V bias. The noise current under sunlight is only 73 pA at 10 V bias. The experimental results suggest that the LNO single crystal is one of the promising materials for photodetectors working in UV region.

36 MATERIALS SCIENCE↗

Dissipation in an ultrathin superconducting single-crystal Pb nanobridge

The transport property of a superconducting Pb nanobridge, which is carved by focus ion beam technique from an atomically flat single-crystal Pb thin film grown on Si(111) substrate, is investigated. Below the superconducting transition temperature T{sub C}, the nanobridge exhibits a series of sharp voltage steps as a function of current. The multiple voltage steps are interpreted as a consequence of spatially localized phase slip centers or hot-spot formation in the bridge. Just below the critical current, the voltages versus current curve shows a power-law behavior in the low temperature region, but Ohmic near the T{sub C}. The thermally activated phase slip, quantum phase slip, and imhomogeneity in a one-dimensional superconducting system may contribute to the observed results.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Real time synchrotron x-ray diffraction measurements to determine material strength of shocked single crystals following compression and release

We present a method to use real time, synchrotron x-ray diffraction measurements to determine the strength of shocked single crystals following compression and release during uniaxial strain loading. Aluminum and copper single crystals shocked along [111] were examined to peak stresses ranging from 2 to 6 GPa. Synchrotron x rays were used to probe the longitudinal lattice strains near the rear free surface (16 and 5 {micro}m depths for Al and Cu, respectively) of the metal crystals following shock compression and release. The 111 diffraction peaks showed broadening indicating a heterogeneous microstructure in the released state. The diffraction peaks also shifted to lower Bragg angles relative to the ambient Bragg angle; the magnitude of the shift increased with increasing impact stress. The Bragg angle shifts and appropriate averaging procedures were used to determine the macroscopic or continuum strength following compression and release. For both crystals, the strengths upon release increased with increasing impact stress and provide a quantitative measure of the strain hardening that occurs in Al(111) and Cu(111) during the shock and release process. Our results for Al(111) are in reasonable agreement with a previous determination based solely on continuum measurements. Two points are noteworthy about the developments presented here: Synchrotron x rays are needed because they provide the resolution required for analyzing the data in the released state; the method presented here can be extended to the shocked state but will require additional measurements.

36 MATERIALS SCIENCE↗

Evidence for preferentail rearrangements of mertensite variants by magnetic field in antiferromagnetic CoO crystal.

The synchrotron high-energy x-ray diffraction provides the direct crystallographic evidence for the magnetic-field-driven preferential rearrangements of martensite multivariants in antiferromagnetic CoO crystal. When a magnetic field was incrementally applied up to 6 T on the CoO single crystal cooled below the Neel temperature, the martensite variants with the magnetization easy-axis parallel to the magnetic field direction ({rvec H}) were consumed, while the variants with magnetic moments perpendicular to {rvec H} were enhanced. The microscopic origin for the observation is discussed, which provides important information for understanding the magnetic-field-driven strain observed in the antiferromagnetic alloys, with a selection principle on martensite variants different from that found in the ferromagnetic shape memory alloys.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Relationship between the cathodoluminescence emission and resistivity in In doped CdZnTe crystals

Cadmium zinc telluride, CdZnTe, bulk single crystals doped with 10{sup 19} at./cm{sup 3} of indium in the initial melt were grown by vertical Bridgman technique. The samples were investigated by energy dispersive spectroscopy, cathodoluminiscence (CL), and current-voltage behavior at room temperature. The results shows that Cd and Te vacancy concentration depend on the indium and zinc concentrations. CL measurements indicate a relationship between radiative centers associated to Cd and Te vacancies and resistivity values.

36 MATERIALS SCIENCE↗

Quasi-single-crystal (001) SrTiO{sub 3} templates on Si

The integration of multifunctional oxides on semiconductor devices requires the formation of single-crystal-like oxide templates directly on silicon. We report the fabrication of quasi-single-crystal (001) SrTiO{sub 3} templates on (001) Si by annealing 100 nm thick molecular beam epitaxy-grown epitaxial SrTiO{sub 3} films at 900 deg. C. The full width at half maximum of the (002) rocking curve is 0.006 deg., which is much narrower than SrTiO{sub 3} bulk single crystals. An atomically smooth TiO{sub 2}-terminated surface is obtained by buffered-HF etching, which allows us to create functional oxide heterointerfaces on Si. Epitaxial SrRuO{sub 3} thin films grown on the quasi-single-crystal SrTiO{sub 3} template exhibit a superior crystalline quality and surface morphology.

36 MATERIALS SCIENCE↗

Tunable magnetic and transport properties of single crystalline (Co, Ga)-codoped ZnO films

A series of metallic (Co, Ga)-codoped ZnO single crystalline films have been grown by molecular beam epitaxy. All of the films exhibit metallic conducting behavior and high free carrier concentrations. Besides room temperature ferromagnetism, the anomalous Hall effect due to spin-orbit interaction was also found. Both the saturation magnetization and anomalous Hall effect can be tuned by the carrier concentration or conductivity, revealing that the ferromagnetism is carrier mediated in (Co, Ga)-codoped ZnO films. Our experimental observations are consistent with the recent theoretical description of carrier mediated magnetism in Co doped ZnO.

36 MATERIALS SCIENCE↗

Formation of periodic strained layers associated with nanovoids inside a silicon carbide single crystal induced by femtosecond laser irradiation

We observed the formation of subwavelength periodic strained layers associated with nanovoids in the cross section of femtosecond laser-irradiated lines written inside 4H-SiC single crystals. Both conventional and high-voltage transmission electron microscopies were carried out for microstructural analyses. The cross section of the irradiated lines consists of four to six groups of fine periodic structures. Each group is composed of strained layers with a typical spacing of 150 or 300 nm. The layers extend along the irradiated lines, aligned parallel to the electric field of the laser light. Tiny voids approximately 20 nm in diameter are found in the layers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Above-Bandgap Ordinary Optical Properties of GaSe Single Crystal

We report above-bandgap ordinary optical properties of {var_epsilon}-phase GaSe single crystal. Reference-quality pseudodielectric function <{var_epsilon}(E)> = <{var_epsilon}{sub 1}(E)> +i <{var_epsilon}{sub 2}(E)> and pseudorefractive index <N(E)> = <n(E)> +i <k(E)> spectra were measured by spectroscopic ellipsometry from 0.73 to 6.45 eV at room temperature for the light polarization perpendicular to the optic axis ({rvec E} {perpendicular} {rvec e}). The <{var_epsilon}> spectrum exhibited several interband-transition critical-point structures. Analysis of second-energy derivatives calculated numerically from the measured data yielded the critical-point energy values.

36 MATERIALS SCIENCE↗

Excitonic mechanism of the photoinduced surface restructuring of copper

An explanation for the photoinduced reconstruction of Cu single-crystal surfaces that was observed by Ernst et al. [Science 279, 679 (1998)] under the influence of visible light is proposed. It is suggested that reconstruction can be attributed to the energy released during the nonradiative decay of excitons that were excited by light irradiation and captured on surface active centers. The estimates performed show that exciton decay on surface steps and adatoms releases enough energy to create surface defects.

36 MATERIALS SCIENCE↗

Ray tracing flux calculation for the small and wide angle x-ray scattering diffraction station at the SESAME synchrotron radiation facility

The calculation for the optics of the synchrotron radiation small and wide angle x-ray scattering beamline, currently under construction at SESAME is described. This beamline is based on a cylindrically bent germanium (111) single crystal with an asymmetric cut of 10.5 deg., followed by a 1.2 m long rhodium coated plane mirror bent into a cylindrical form. The focusing properties of bent asymmetrically cut crystals have not yet been studied in depth. The present paper is devoted to study of a particular application of a bent asymmetrically cut crystal using ray tracing simulations with the SHADOW code. These simulations show that photon fluxes of order of 1.09x10{sup 11} photons/s will be available at the experimental focus at 8.79 keV. The focused beam dimensions will be 2.2 mm horizontal full width at half maximum (FWHM) by 0.12 mm vertical (FWHM).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗