Search NASA⌕ Search

SEARCH · Search NASA

Results for “Material microstructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Quantum confinement of zero-dimensional hybrid organic-inorganic polaritons at room temperature

We report on the quantum confinement of zero-dimensional polaritons in perovskite-based microcavity at room temperature. Photoluminescence of discrete polaritonic states is observed for polaritons localized in symmetric sphere-like defects which are spontaneously nucleated on the top dielectric Bragg mirror. The linewidth of these confined states is found much sharper (almost one order of magnitude) than that of photonic modes in the perovskite planar microcavity. Our results show the possibility to study organic-inorganic cavity polaritons in confined microstructure and suggest a fabrication method to realize integrated polaritonic devices operating at room temperature.

36 MATERIALS SCIENCE↗

Two-step synthesis of Bi{sub 2}Te{sub 3}-Te nanoarrays with sheet-rod multiple heterostructure

Bi{sub 2}Te{sub 3}-Te arrays with sheet-rod multiple heterostructure were obtained in large scale, using Te nanorod arrays as the in-situ templates under solvothermal process. The array is formed by the ordered Bi{sub 2}Te{sub 3}-Te rods where Bi{sub 2}Te{sub 3} sheets distribute from the top face to the bottom face along the Te rod vertically. The microstructure of the heterostructure was studied through X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The electrical conductivity and Seebeck coefficient of the arrays were also studied. The course of reaction was monitored so as to propose a possible growth mechanism of such novel heterostructure. The key for the preparation of such heterostructure is to balance the velocity between the dissolution of Te rods and the formation of Bi{sub 2}Te{sub 3} sheets. This synthetic approach could be promising to prepare self-assembled low-dimensional nanoarrays of metals and semiconductors with high yield. - Graphical abstract: Bi{sub 2}Te{sub 3}-Te arrays with sheet-rod multiple heterostructure were obtained in a large scale using Te nanorod arrays as the in-situ templates under the solvothermal process. Display Omitted

36 MATERIALS SCIENCE↗

Bulk ultrafine grained/nanocrystalline metals via slow cooling

Cooling, nucleation, and phase growth are ubiquitous processes in nature. Effective control of nucleation and phase growth is of significance to yield refined microstructures with enhanced performance for materials. Recent studies reveal that ultrafine grained (UFG)/nanocrystalline metals exhibit extraordinary properties. However, conventional microstructure refinement methods, such as fast cooling and inoculation, have reached certain fundamental limits. It has been considered impossible to fabricate bulk UFG/nanocrystalline metals via slow cooling. Here, we report a new discovery that nanoparticles can refine metal grains to ultrafine/nanoscale by instilling a continuous nucleation and growth control mechanism during slow cooling. The bulk UFG/nanocrystalline metal with nanoparticles also reveals an unprecedented thermal stability. This method overcomes the grain refinement limits and may be extended to any other processes that involve cooling, nucleation, and phase growth for widespread applications.

36 MATERIALS SCIENCE↗

Advanced Characterization of Irradiated Fuels and Materials at INL

Advanced characterization of the irradiated fuels and materials is crucial to help understanding the material and fuel property changes under irradiation. Microstructural defect evolution down to nanometer scale could strongly affect the material and fuel performance on macroscale. Radiation-induced material degradation include dimensional instability, hardening and embrittlement, intergranular cracking, radiation-enhanced chemical interaction at the interfaces and breakaway swelling. To mitigate the radiation damage, advanced characterization on irradiated microstructure, microchemistry, micromechanical property and local thermal property is necessary to identify the controlling mechanisms that are responsible to the degradations. This presentation provides a summary of the advanced characterization capabilities at the Irradiation Materials Characterization Laboratory (IMCL), Materials and Fuels Complex (MFC), Idaho National Laboratory (INL). It highlights the recently established capabilities including shield sample preparation area (SSPA), shield confinement cells for two focused ion beam (FIB) systems, a shielded electron probe microanalysis (EPMA), the thermal property microscopy (TPM) along with non-shielded instruments like scanning electron microscopy (SEM), X-ray diffractometer, and transmission electron microscopy (TEM). Some examples on advanced characterizations on irradiated structural materials and fuels will be presented. It demonstrates the power of combining sample preparation of highly radioactive materials with the advanced characterization down to atomic resolutions within one facility.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Friction Consolidation Processing of n-Type Bismuth-Telluride Thermoelectric Material

This work focused on the development of a new mechanical processing route, called Friction Consolidation Processing (FCP), for densifying bismuth-telluride (Bi2Te3) powders into bulk form. FCP is a solid-state process wherein a rotating tool was used to generate severe plastic deformation within the Bi2Te3 powder, resulting in a recrystallizing flow of material. Upon cooling, the non-equilibrium microstructure within the flow was locked into the material. FCP was demonstrated on -325 mesh (~44 micron) n-type Bi2Te3 feedstock powder to form pucks with 92% theoretical density having a diameter of 25.4mm and thickness of 4.2mm. FCP was shown to achieve highly textured bulk materials, with sub-micron grain size, directly from coarse particle feedstock powders in a single process. An average grain size of 0.8 microns was determined for one sample and a multiple of uniform distribution (MUD) value of 15.49 was calculated for the (0001) pole figure from another sample. These results indicate that FCP can yield highly refined grains and textural alignment of the (0001) basal planes in Bi2Te3. ZT=0.37 at 336K was achieved for undoped stoichiometric Bi2Te3, which is near the “text book” value of ZT=0.5.

Whalen, Scott A.↗

An innovative and alternative approach toward gear fabrication

In this paper, we present the first demonstration of single-step gear manufacturing via an innovative in-situ friction stir forging approach. This novel process is a natural extension to the friction stir processing technique and relies on shear and normal stresses to form the complex shapes. Friction stir welding pin tool with shoulder is plunged at high revolutions per minute (rpm) into the sample to heat it to the desired temperature and enable plastic flow. Then, the tool is forged at high plunge rate to form the desired structurally-sound and defect free complex shapes. To better visualize the process the experiments are complemented by a 3D thermomechanically coupled, smoothed particle hydrodynamics (SPH) model to understand the material flow pattern both radially and through thickness in the gear teeth, plastic strain distribution, and temperature profile. We have demonstrated application of I-FSF to inherently poor formable AZ31 Mg, AA 7075-T6, and AA5083–10 vol% TiB 2 composite and fabricated 14-tooth spur gears from these materials with minimal farther machining. In conclusion, microstructure of the forged gears exhibited a directional material flow pattern due to the normal forging action and refinement of grains to 6–13 μm through dynamically recrystallization across the radial, through-thickness direction, which is in good agreement with the corresponding SPH simulation results.

42 ENGINEERING↗

Stability of Catalyzed Magnesium Hydride Nanocrystalline During Hydrogen Cycling. Part II: Microstructure Evolution

In Part I, the cyclic stabilities of the kinetics of catalyzed MgH2 systems including MgH2–TiH2, MgH2–TiMn2, and MgH2–VTiCr were investigated, showing stable kinetics at 300 °C but deteriorations of the hydrogenation kinetics at temperatures below 150 °C. The present Part II describes the characterization of uncycled and cycled catalyzed MgH2 by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) analysis. XRD analysis shows the crystallite sizes of the Mg and MgH2 significantly increased after the cycling. The mean crystallite sizes of the catalysts (TiH2 and VTiCr) increased moderately after the cycling. SEM and TEM imaging were used to compare the microstructures of uncycled (as-milled) and cycled materials, revealing a drastic change of the microstructure after 100 cycles. In particular, results from energy-dispersive spectroscopy (EDS) mapping show that a change of distribution of the catalyst particles in the Mg and MgH2 phase occurred during the cycling.

Zhou, Chengshang↗

Co layer fragmentation effect on magnetoresistive and structural properties of nanogranular Co/Cu multilayers

We deposited nanogranular Co/Cu multilayers made of thin fragmented Co layers separated by thicker Cu layers to study how the structure and the microstructure of magnetic nanogranular samples change as the average particle size is reduced and how these changes affect the giant magnetoresistive response of the samples. Indeed, thanks to the vertical periodicity of the structure, namely, to the fact that Co/Cu interfaces display an ordered stacking and are not randomly distributed within the samples as in conventional granular materials, their self-correlation and cross correlation can be investigated. In this way, the characteristic length scale of the Co/Cu interfacial roughness that is strictly related to the giant magnetoresistive response of the samples and the universality class of the growth mechanism that affects the systems structure can be both accessed. The Co/Cu nanogranular multilayers were characterized using different x-ray techniques, from specular reflectivity, which allows to probe the multilayer development in the vertical direction, to grazing incidence small angle diffuse scattering, which provides information on the self-correlation and cross correlation of the Co/Cu interfaces. Furthermore, diffraction measurements indicate that the degree of structural disorder increases by decreasing the thickness of the Co layers. Magnetoresistive and magnetization measurements are as well presented and discussed with the results of the structural characterization.

36 MATERIALS SCIENCE↗

Effect of microstructure on fatigue crack propagation in additive manufactured nickel-based superalloy Haynes 282: an experiment and crystal plasticity study

Haynes 282 is a γ' precipitation-strengthened nickel-based superalloy known for its exceptional high-temperature creep resistance and excellent fabricability. Recent advancements in powder-bed fusion-based additive manufacturing (PBF-AM) have enabled the fabrication of Haynes 282 with accurate, site-specific control of the grain orientation and morphology at the microscale. This ability opens up new avenues for microstructure design, to improve the material’s fatigue crack resistance and service life. This paper investigates the fatigue crack growth behavior of hybrid microstructure Haynes 282 fabricated via PBF-AM. Previous experiments revealed a higher crack propagation rate in the coarse columnar-grained microstructural regions when compared against fine-grained areas. Here, a strain gradient crystal plasticity model was adapted to study the fracture-related mechanical fields at the crack tip in the two microstructures. The simulation results showed a consistent influence of grain structure and texture on crack propagation, as was seen in the experiment. The model analysis revealed higher crack propagation driving force along crack direction in the coarse-grained sharply textured microstructure and higher driving force for crack kinking in fine-grained more diffusely textured microstructure, which is ascribed to the combined effect of yield stress, hardening rate, texture and grain morphology. The presented modeling approach will facilitate the development of the AM-based accurate microstructure design by deepening the fundamental study in AM-specific microstructure-properties relations.

36 MATERIALS SCIENCE↗

A microstructural analysis of aluminum buildup during thermomechanical processing

Highlights: • Microstructure of roll coating developed on a ground steel work roll was examined. • Roll coating was formed during the 20 pass hot rolling schedule of an Al-Mg alloy. • The roll coating had a complex layered nanocrystalline and amorphous structure. • The roll coating layers were composed of metallic Al, porous MgO and C. • Work roll debris, Fe and Cr, were observed embedded within the roll coating. - Abstract: The microstructure and composition of a roll coating built-up on an AISI M2 steel work roll during a 20 pass hot rolling schedule using a laboratory rolling tribo-simulator with a roll-on-block configuration was examined. The AISI M2 steel work roll was characterized by grinding grooves and possessed a surface roughness (R{sub a}) of 0.17 μm. The roll coating developed under these lubricated conditions was discontinuous, patchy and streaked out in the rolling direction. The microstructure and chemical composition of the material transfer that made up the roll coating was analysed and revealed to possess a complex composite microstructure consisting of nanocrystalline aluminum, nanocrystalline/amorphous MgO and amorphous carbon layers. The nanocrystalline MgO layers were porous structures lying between the solid metallic aluminum layers. Debris particles from the wear of the work roll were detected embedded within the carbon layer and at the base of the roll coating. The microstructure of the roll coating appear to be determined by the deformation conditions experienced during the rolling process, while its composition is dependent on the composition of the rolled alloy, the work roll and the lubrication conditions employed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Heterogeneous microstructure of yttrium hydride and its relation to mechanical properties

Here, the goal of this study is to investigate the properties of yttrium hydride materials in relation to the microstructure, especially its homogeneity. High-throughput nanoindentation mapping was used to evaluate hardness distribution. Raman spectral imaging demonstrated its sensitivity to the presence of YH2 and impurities. Raman peak position maps were correlated with residual stress in the specimens. Electron backscatter diffraction mapping provided phase distributions with correlation to high-energy X-ray diffraction analysis. The experimental mapping data were combined and analyzed using unsupervised machine learning cluster procedures. The machine learning analysis revealed that yttrium hydride specimens contained a major δ-YH2 – x phase component and minor α-Y and δ-YH2 – x components with significant residual stress. The minor phase fraction decreased with increasing nominal H/Y ratio, which affected the nanoindentation and Vickers hardness. The multimodal mapping procedures described herein affect developing important microstructure–property relationships, as well as correlations in heterogeneity and mechanical properties.

36 MATERIALS SCIENCE↗

Engineering the Thermoelectric Transport in Half-Heusler Materials through a Bottom-Up Nanostructure Synthesis

Half-Heusler (HH) alloys are among the best promising thermoelectric (TE) materials applicable for the middle-to-high temperature power generation. Despite of the large thermoelectric power factor and decent figure-of-merit ZT (≈1), their broad applications and enhancement on TE performance are limited by the high intrinsic lattice thermal conductivity (κ L ) due to insufficiencies of phonon scattering mechanisms, and the fewer powerful strategies associated with the microstructural engineering for HH materials. This study reports a bottom-up nanostructure synthesis approach for these HH materials based on the displacement reaction between metal chlorides/bromides and magnesium (or lithium), followed by vacuum-assisted spark plasma sintering process. The samples are featured with dense dislocation arrays at the grain boundaries, leading to a minimum κ L of ≈1 W m -1 K -1 at 900 K and one of the highest ZT (≈1) and predicted η (≈11%) for n-type Hf 0.25 Zr 0.75 NiSn 0.97 Sb 0.03 . Further manipulation on the dislocation defects at the grain boundaries of p-type Nb 0.8 Ti 0.2 FeSb leads to enhanced maximum power factor of 47 × 10 -4 W m -1 K -2 and the predicted η of ≈7.5%. Moreover, vanadium substitution in FeNb 0.56 V 0.24 Ti 0.2 Sb significantly promotes the η to ≈11%. This strategy can be extended to a broad range of advanced alloys and compounds for improved properties.

36 MATERIALS SCIENCE↗

Modeling of additive manufacturing processes for metals: Challenges and opportunities

Here, with the technology being developed to manufacture metallic parts using increasingly advanced additive manufacturing processes, a new era has opened up for designing novel structural materials, from designing shapes and complex geometries to controlling the microstructure (alloy composition and morphology). The material properties used within specific structural components are also designable in order to meet specific performance requirements that are not imaginable with traditional metal forming and machining (subtractive) techniques.

36 MATERIALS SCIENCE↗

Post-irradiation Examination Plan for ORNL and University of California Santa Barbara Assessment of UCSB ATR-2 Irradiation Experiment

New and existing databases will be combined to support development of physically based models of transition temperature shifts (TTS) for high fluence-low flux (φ < 10 11 n/cm 2 -s) conditions, beyond the existing surveillance database, to neutron fluences of at least 1×10 20 n/cm 2 (>1 MeV). All references to neutron flux and fluence in this report are for fast neutrons (>1 MeV). The reactor pressure vessel (RPV) task of the Light Water Reactor Sustainability (LWRS) Program is working with various organizations to obtain archival surveillance materials from commercial nuclear power plants to allow for comparisons of the irradiation-induced microstructural features from reactor surveillance materials with those from similar materials irradiated under high flux conditions in test reactors

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Post-irradiation Examination Plan for the ORNL and University of California Santa Barbara Assessment of the UCSB ATR-2 Irradiation Experiment and a Reference Document for the Irradiated Archival RPV Materials Stored in the NSUF Nuclear Fuels and Materials Library

The Reactor Pressure Vessel task of the LWRS Program works with various organizations to obtain archival surveillance materials from commercial nuclear power plants to allow for comparisons of the irradiation-induced microstructural features from reactor surveillance materials with those from similar materials irradiated under high flux conditions in test reactors, such as the UCSB ATR-2 experiment. This report, originally submitted as a Level 3 Milestone M3LW-14OR0402012 – “Complete report on post-irradiation examination plan for ORNL and University of California Santa Barbara assessment of ATR-2 capsules,” has been expanded to providing a reference to access and / or perform characterization of irradiated archival RPV materials that were transferred to the Nuclear Science User Facility (NSUF), Nuclear Fuels and Materials Library (NFML).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Testing of LWR Surveillance Materials from the High Fluence UCSB ATR-2 Irradiation

The reactor pressure vessel (RPV) in a light water reactor (LWR) represents the first line of defense against a release of radiation in case of an accident. Thus, regulations that govern the operation of commercial nuclear power plants require conservative margins of fracture toughness, both during normal operation and under accident scenarios. In the unirradiated condition, the RPV has sufficient fracture toughness such that failure is implausible under any postulated condition, including pressurized thermal shock (PTS) in pressurized water reactors (PWR). In the irradiated condition, however, the fracture toughness of the RPV may be severely degraded, with the degree of toughness loss dependent on the radiation sensitivity of the materials. Of the many significant issues discussed regarding irradiation effects, the issue considered to have the most impact on the current regulatory process is that associated with effects of neutron irradiation on RPV steels at high fluence, for long irradiation times, and as affected by neutron flux. As also stated in a companion paper by Odette, et. al., the primary objective of the DOE-sponsored Light Water Reactor Sustainability (LWRS) Program RPV task is to develop robust predictions of transition temperature shifts (TTS) at high fluence (φt) to at least 10{sup 20} n/cm{sup 2} (>1 MeV) pertinent to plant operation of some pressurized water reactors (PWR) for 80 full power years. While understanding of copper-enriched precipitates (CRPs) have been fully developed, the discovery and experimental verification of 'late blooming' Mn-Ni-enriched precipitates (MNPs) with little to no copper for nucleation has stimulated research efforts to understand the evolution of these phases. The new and existing databases will be combined to support development of physically based models of TTS for high fluence-low flux (φ < 10 {sup 11}n/cm{sup 2}-s) conditions, beyond the existing surveillance database, to neutron fluences of at least 10{sup 20} n/cm{sup 2} (>1 MeV). The RPV task of the LWRS Program has worked with various organizations to obtain archival surveillance materials from commercial nuclear power plants to allow for comparisons of the irradiation-induced microstructural features from reactor surveillance materials with those from similar alloys irradiated under high flux conditions in test reactors, such as the UCSB ATR-2 experiment conducted at the Advanced Test Reactor (ATR) at the Idaho National Laboratory (INL). (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A Multiphysics Study to Improve Specific Energy of Primary Batteries for Low Temperature Operation for Deep Space Missions

Several lander missions on the outer planets such as Europa, Enceladus, and Titan require electrical power to operate scientific and communication equipment. The traditional power generation methods, such as a photovoltaic array, are not feasible as their efficiency drops significantly at these vast distances. The novel radioisotope power systems are not practical today based on current lander designs and the effectiveness of these systems. To perform in situ science on distant planets, a high specific energy battery (>700 Wh/kg) needs to operate for about 480 hours under cold temperatures (-40C or 0C) [1]. While a primary battery such as Li-CFx can provide high specific energy at room temperature, its specific capacity decreases significantly at low temperatures. One of the causes for this drop is low ion and electrical conductivity, and slower reaction kinetics. Slower transport and facile kinetics lead to an increase in the battery’s resistance and higher voltage drops during the cell operation, thus reducing specific capacity. Both the transport and kinetics show a strong dependence on temperature. Thus, a small temperature rise can lead to an increase in the reaction rate and ion conductivity; since the temperature, cell resistance, and specific capacity are interdependent. A conventional battery model accounts for ohmic, thermodynamic, and, electrochemical, and chemical decomposition heating. The ohmic heating can be controlled by designing a resistive microstructure and varying the ratios of the active materials [2]. The kinetics can be improved by increasing the surface area, reducing the particle size, or adding a catalyst. These parameters are often optimized to achieve high specific energy at room temperatures. A similar optimization study is not available at low temperatures and for a primary (high specific energy) battery. For this presentation, we will explore the effect of geometrical, microstructural, and material properties on optimal specific capacity at low temperatures through multiphysics simulations. The ion transport resistance depends on the porosity and the tortuosity of an electrode and the separator.

M. Mehta↗

Predicting microstructurally sensitive fatigue‐crack path in WE43 magnesium using high‐fidelity numerical modeling and three‐dimensional experimental characterization

Abstract Microstructurally small fatigue‐crack growth in polycrystalline materials is highly three‐dimensional due to sensitivity to local microstructural features (e.g., grains). One requirement for modeling microstructurally sensitive crack propagation is establishing the criteria that govern crack evolution, including crack deflection. Here, a high‐fidelity finite‐element modeling framework is used to assess the performance and validity of various crack‐growth criteria, including slip‐based metrics (e.g., fatigue‐indicator parameters), as potential criteria for predicting three‐dimensional crack paths in polycrystalline materials. The modeling framework represents cracks as geometrically explicit discontinuities and involves voxel‐based remeshing, mesh‐gradation control, and a crystal‐plasticity constitutive model. The predictions are compared to experimental measurements of WE43 magnesium samples subject to fatigue loading, for which three‐dimensional grain structures and fatigue‐crack surfaces were measured post‐mortem using near‐field high‐energy x‐ray diffraction microscopy and x‐ray computed tomography. Findings from this work are expected to improve the predictive capabilities of simulations involving microstructurally small fatigue‐crack growth in polycrystalline materials.

Engineering↗