Search NASA⌕ Search

SEARCH · Search NASA

Results for “Method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

A method for computing instantaneous downtrack error from TDRS Doppler residuals

A simple method has been developed which calculates the instantaneous downtrack error in an orbiting vehicle's state vector from TDRS (Tracking and Data Relay Satellite) Doppler observation residuals. The downtrack error is expressed as a delta-time correction to the timetag of the vehicle's state vector. The method requires only a few easily obtained parameters and is easy to implement. This paper details the derivation of computing a delta-time correction from TDRS Doppler observation residuals and evaluates the method's assumptions and limitations. The results presented show that typically the method computes delta-time corrections that are less than five percent off from the true timetag error for Doppler observation residuals within twenty minutes of closest approach to the TDRS.

Haas, Franklin M., Jr.↗

On the correlated k-distribution method for radiative transfer in nonhomogeneous atmospheres

The paper discusses the correlated k(absorption coefficient)-distribution (CKD) method for radiative transfer in nonhomogeneous atmospheres, in terms of the physical and mathematical conditions under which this method is valid. The CKD approach is theoretically formulated, and the mathematical and physical conditions under which this method is valid are identified. The parameterization for incorporating pressure and temperature effects in the k distribution is presented. The errors of CKD for absorption bands in the solar and thermal infrared spectra are examined, and the errors due to both the CKD method and the use of the optimum number of quadrature points are identified. Finally, an overall treatment for various absorption bands is developed, which will provide high efficiency and accuracy.

Fu, Qiang↗

Sub-domain decomposition methods and computational controls for multibody dynamical systems

This paper presents a concurrent methodology to simulate the dynamics of flexible multibody systems with a large number of degrees of freedom. A general class of open-loop structures is treated and a redundant coordinate formulation is adopted. A range space method is used in which the constraint forces are calculated using a preconditioned conjugate gradient method. By using a preconditioner motivated by the regular ordering of the directed graph of the structures, it is shown that the method is order N in the total number of coordinates of the system. The overall formulation has the advantage that it permits fine parallelization and does not rely on system topology to induce concurrency. It can be efficiently implemented on the present generation of parallel computers with a large number of processors. Validation of the method is presented via numerical simulations of space structures incorporating large number of flexible degrees of freedom.

Menon, R. G.↗

A least-squares finite element method for 3D incompressible Navier-Stokes equations

The least-squares finite element method (LSFEM) based on the velocity-pressure-vorticity formulation is applied to three-dimensional steady incompressible Navier-Stokes problems. This method can accommodate equal-order interpolations, and results in symmetric, positive definite algebraic system. An additional compatibility equation, i.e., the divergence of vorticity vector should be zero, is included to make the first-order system elliptic. The Newton's method is employed to linearize the partial differential equations, the LSFEM is used to obtain discretized equations, and the system of algebraic equations is solved using the Jacobi preconditioned conjugate gradient method which avoids formation of either element or global matrices (matrix-free) to achieve high efficiency. The flow in a half of 3D cubic cavity is calculated at Re = 100, 400, and 1,000 with 50 x 52 x 25 trilinear elements. The Taylor-Gortler-like vortices are observed at Re = 1,000.

Jiang, Bo-Nan↗

An improved reconstruction method for cosmological density fields

This paper proposes some improvements to existing reconstruction methods for recovering the initial linear density and velocity fields of the universe from the present large-scale density distribution. We derive the Eulerian continuity equation in the Zel'dovich approximation and show that, by applying this equation, we can trace the evolution of the gravitational potential of the universe more exactly than is possible with previous approaches based on the Zel'dovich-Bernoulli equation. The improved reconstruction method is tested using N-body simulations. When the Zel'dovich-Bernoulli equation describes the formation of filaments, then the Zel'dovich continuity equation also follows the clustering of clumps inside the filaments. Our reconstruction method recovers the true initial gravitational potential with an rms error about 3 times smaller than previous methods. We examine the recovery of the initial distribution of Fourier components and find the scale at which the recovered phases are scrambled with respect their true initial values. Integrating the Zel'dovich continuity equation back in time, we can improve the spatial resolution of the reconstruction by a factor of about 2.

Gramann, Mirt↗

Evaluation of the Munich Method for modeling rocket engine performance

A new procedure, dubbed the Munich Method, has been proposed recently for the modeling of rocket engine performance. The author of the Munich Method claims it to be an extension and improvement of the thermodynamic procedures used to model rocket engines in the NASA-Lewis chemical equilibrium program. An examination of the Munich Method shows that it contains several flaws. If these defects are corrected then the Munich Method will produce results identical to those generated by the NASA-Lewis Code.

Zeleznik, Frank J.↗

Helicopter trim analysis by shooting and finite element methods with optimally damped Newton iterations

Helicopter trim settings of periodic initial state and control inputs are investigated for convergence of Newton iteration in computing the settings sequentially and in parallel. The trim analysis uses a shooting method and a weak version of two temporal finite element methods with displacement formulation and with mixed formulation of displacements and momenta. These three methods broadly represent two main approaches of trim analysis: adaptation of initial-value and finite element boundary-value codes to periodic boundary conditions, particularly for unstable and marginally stable systems. In each method, both the sequential and in-parallel schemes are used, and the resulting nonlinear algebraic equations are solved by damped Newton iteration with an optimally selected damping parameter. The impact of damped Newton iteration, including earlier-observed divergence problems in trim analysis, is demonstrated by the maximum condition number of the Jacobian matrices of the iterative scheme and by virtual elimination of divergence. The advantages of the in-parallel scheme over the conventional sequential scheme are also demonstrated.

Achar, N. S.↗

Coupling finite and boundary element methods for 2-D elasticity problems

A finite element-boundary element (FE-BE) coupling method for two-dimensional elasticity problems is developed based on a weighted residual variational method in which a portion of the domain of interest is modeled by FEs and the remainder of the region by BEs. The performance of the FE-BE coupling method is demonstrated via applications to a simple 'patch test' problem and three-crack problems. The method passed the patch tests for various modeling configurations and yielded accurate strain energy release rates for the crack problems studied.

Krishnamurthy, T.↗

An inverse method for computation of structural stiffness distributions of aeroelastically optimized wings

An inverse method has been developed to compute the structural stiffness properties of wings given a specified wing loading and aeroelastic twist distribution. The method directly solves for the bending and torsional stiffness distribution of the wing using a modal representation of these properties. An aeroelastic design problem involving the use of a computational aerodynamics method to optimize the aeroelastic twist distribution of a tighter wing operating at maneuver flight conditions is used to demonstrate the application of the method. This exercise verifies the ability of the inverse scheme to accurately compute the structural stiffness distribution required to generate a specific aeroelastic twist under a specified aeroelastic load.

Schuster, David M.↗

Theoretical and numerical difficulties in 3-D vector potential methods in finite element magnetostatic computations

This paper describes the results of application of three well known 3D magnetic vector potential (MVP) based finite element formulations for computation of magnetostatic fields in electrical devices. The three methods were identically applied to three practical examples, the first of which contains only one medium (free space), while the second and third examples contained a mix of free space and iron. The first of these methods is based on the unconstrained curl-curl of the MVP, while the second and third methods are predicated upon constraining the divergence of the MVP 10 zero (Coulomb's Gauge). It was found that the two latter methods cease to give useful and meaningful results when the global solution region contains a mix of media of high and low permeabilities. Furthermore, it was found that their results do not achieve the intended zero constraint on the divergence of the MVP.

Demerdash, N. A.↗

A method for simulating a flux-locked DC SQUID

The authors describe a computationally efficient and accurate method for simulating a dc SQUID's V-Phi (voltage-flux) and I-V characteristics which has proven valuable in evaluating and improving various SQUID readout methods. The simulation of the SQUID is based on fitting of previously acquired data from either a real or a modeled device using the Fourier transform of the V-Phi curve. This method does not predict SQUID behavior, but rather is a way of replicating a known behavior efficiently with portability into various simulation programs such as SPICE. The authors discuss the methods used to simulate the SQUID and the flux-locking control electronics, and present specific examples of this approach. Results include an estimate of the slew rate and linearity of a simple flux-locked loop using a characterized dc SQUID.

Gutt, G. M.↗

Lunar-base construction equipment and methods evaluation

A process for evaluating lunar-base construction equipment and methods concepts is presented. The process is driven by the need for more quantitative, systematic, and logical methods for assessing further research and development requirements in an area where uncertainties are high, dependence upon terrestrial heuristics is questionable, and quantitative methods are seldom applied. Decision theory concepts are used in determining the value of accurate information and the process is structured as a construction-equipment-and-methods selection methodology. Total construction-related, earth-launch mass is the measure of merit chosen for mathematical modeling purposes. The work is based upon the scope of the lunar base as described in the National Aeronautics and Space Administration's Office of Exploration's 'Exploration Studies Technical Report, FY 1989 Status'. Nine sets of conceptually designed construction equipment are selected as alternative concepts. It is concluded that the evaluation process is well suited for assisting in the establishment of research agendas in an approach that is first broad, with a low level of detail, followed by more-detailed investigations into areas that are identified as critical due to high degrees of uncertainty and sensitivity.

Boles, Walter W.↗

Application of an engineering inviscid-boundary layer method to slender three-dimensional vehicle forebodies

An engineering inviscid-boundary layer method has been modified for application to slender three-dimensional (3-D) forebodies which are characteristic of transatmospheric vehicles. An improved shock description in the nose region has been added to the inviscid technique which allows the calculation of a wider range of body geometries. The modified engineering method is applied to the perfect gas solution over a slender 3-D configuration at angle of attack. The method predicts surface pressures and laminar heating rates on the windward side of the vehicle that compare favorably with numerical solutions of the thin-layer Navier-Stokes equations. These improvements extend the 3-D capabilities of the engineering method and significantly increase its design applications.

Riley, Christopher J.↗

Evaluation of a transfinite element numerical solution method for nonlinear heat transfer problems

Laplace transform techniques have been widely used to solve linear, transient field problems. A transform-based algorithm enables calculation of the response at selected times of interest without the need for stepping in time as required by conventional time integration schemes. The elimination of time stepping can substantially reduce computer time when transform techniques are implemented in a numerical finite element program. The coupling of transform techniques with spatial discretization techniques such as the finite element method has resulted in what are known as transfinite element methods. Recently attempts have been made to extend the transfinite element method to solve nonlinear, transient field problems. This paper examines the theoretical basis and numerical implementation of one such algorithm, applied to nonlinear heat transfer problems. The problem is linearized and solved by requiring a numerical iteration at selected times of interest. While shown to be acceptable for weakly nonlinear problems, this algorithm is ineffective as a general nonlinear solution method.

Cerro, J. A.↗

An improved far field drag calculation method for nonlinear CFD codes

An improved method to calculate drag based on far field conditions is presented and demonstrated. The method is illustrated using two CFD codes, PARC and CFL3D, and examining their ability to preserve lift and drag coefficients along grid line defined integration paths. The flow fields were generated by solving the Euler equations for a NACA 0012 airfoil at a free stream Mach number of 0.8 and angle of attack of 1.25 degrees. In comparison to force coefficients obtained by surface pressure integration, neither code acceptably preserved both force coefficients throughout the near and far fields. An investigation into the relationship between numerical prediction error and calculated force coefficients revealed a direct connection between solution mass conservation error and force coefficients error. A method to correct the predicted force coefficients based on integrated mass conservation error is described and demonstrated. The corrected force coefficients for both codes are shown to be more accurate than the uncorrected values. The correction method is applicable to both two and three dimensions and is independent of the algorithm used to generate the flow field.

Sirbaugh, James R.↗

A method for the prediction of induced drag for planar and nonplanar wings

A new method for the prediction of induced drag of planar and nonplanar wings is presented. This method is based on the application of the Kutta-Joukowski law at the trailing edge. Until recently, the use of the Kutta-Joukowski law for this purpose has not been fully explored and pressure integration and Trefftz-plane calculations favored. It is shown, however, that this method is able to give better results for a given amount of effort than the more commonly used techniques, particularly when relaxed wakes and nonplanar wing geometries are considered. When the induced drag prediction procedure is coupled with a panel method, it results in a methodology that is fast enough and sufficiently accurate to be useful for design purposes. It is demonstrated that reductions in induced drag can be achieved, particularly through the use of nonplanar wing geometries. To obtain overall drag reductions, the induced drag reduction must be traded-off against increased profile drag due to increased wetted area. With the design methodology that is described herein, such trade studies can be performed in which the non-linear effects of the free wake are taken into account.

Mortara, Karl W.↗

Unstructured viscous grid generation by advancing-layers method

A new method of generating unstructured triangular/tetrahedral grids with high-aspect-ratio cells is proposed. The method is based on new grid-marching strategy referred to as 'advancing-layers' for construction of highly stretched cells in the boundary layer and the conventional advancing-front technique for generation of regular, equilateral cells in the inviscid-flow region. Unlike the existing semi-structured viscous grid generation techniques, the new procedure relies on a totally unstructured advancing-front grid strategy resulting in a substantially enhanced grid flexibility and efficiency. The method is conceptually simple but powerful, capable of producing high quality viscous grids for complex configurations with ease. A number of two-dimensional, triangular grids are presented to demonstrate the methodology. The basic elements of the method, however, have been primarily designed with three-dimensional problems in mind, making it extendible for tetrahedral, viscous grid generation.

Pirzadeh, Shahyar↗

Assessment of three numerical methods for the computation of a low-density plume flow

Results from three numerical methods including one based on the Navier-Stokes equations, one based on kinetic theory using the DSMC method, and one based on the Boltzmann equation with a Krook-type collision term are compared to each other and to experimental data for a model problem of heated nitrogen flow in a conical nozzle expanding into a vacuum. The problem simulates flow in a resistojet, a low-thrust, electrothermal rocket. The continuum method is applied to both the internal flow and near-field plume. The DSMC and Boltzmann methods are applied primarily to the plume. Experimental measurements of Pitot pressure and flow angle, taken with an apparatus that duplicates the model nozzle flow, are used in the comparisons.

Penko, Paul F.↗