Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHASE VELOCITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Leipzig University W-Band Cloud Radar, Gothic (Colorado), SAIL Campaign Second Winter (15.11.2022 - 05.06.2023)

The instrument is a polarimetric W-Band simultaneous transmission simultaneous reception (STSR) Doppler Cloud Radar manufactured by Radiometer Physics GmbH (RPG, instrument type RPG-FMCW-94-DP). It was deployed about 500m away from the ARM M1 facility in Gothic (CO) near the Ore House between Nov 15, 2022 and Jun 5, 2023 at an altitude of 2913 m. The Doppler cloud radar was mounted on a prototype of a cold temperature scanner manufactured by RPG. The dataset contains common radar variables like equivalent radar reflectivity factor, mean Doppler velocity, Doppler spectrum width as well as common polarimetric radar variables like differential phase shift (PhiDP), specific differential phase shift (KDP), correlation coefficient (RHV) and differential reflectivity (ZDR). Between Nov 15, 2022, and Feb 7, 2023 the radar was operated at 40° constant elevation and 151° azimuth (towards the KAZR at the AMF1). Between Feb 7 and Mar 15, 2023 the following scan cycle was repeated in 15min intervals: zenith pointing measurements, RHI scans from 0° to 90° and 90° to 0° elevation at 151° azimuth, constant elevation measurements at 40° elevation and 151° azimuth and PPI scans at 85° elevation for wind retrievals (one PPI per hour). Between Mar 15 18:18 UTC and Apr 8, 2023 11:04 UTC, the scanner was stuck at 72° elevation, which resulted in corrupted files for this period. For that period, the files containing data are uploaded but should be treated with care. Between Apr 8 and Apr 14, 2023 the scanning pattern described above was performed again. Afterwards, except for May 17 and May 18, 2023 where scanning patterns as described above were performed, measurements continued at 40° elevation and 151° azimuth until May 22, 2023 09:00 UTC. The scanning pattern was then started again, but without hourly PPI measurements until May 31, 2023. Between May 31 and Jun 5, 2023 solely zenith-pointing observations were performed. The data provided here are the RPG Level 1 (L1) files, Doppler spectra Level 0 (L0) files are available upon request.

54 ENVIRONMENTAL SCIENCES↗

Resonant surface acoustic wave chemical detector

Apparatus for chemical detection includes a pair of interdigitated transducers (IDTs) formed on a piezoelectric substrate. The apparatus includes a layer of adsorptive material deposited on a surface of the piezoelectric substrate between the IDTs, where each IDT is conformed, and is dimensioned in relation to an operating frequency and an acoustic velocity of the piezoelectric substrate, so as to function as a single-phase uni-directional transducer (SPUDT) at the operating frequency. Additionally, the apparatus includes the pair of IDTs is spaced apart along a propagation axis and mutually aligned relative to said propagation axis so as to define an acoustic cavity that is resonant to surface acoustic waves (SAWs) at the operating frequency, where a distance between each IDT of the pair of IDTs ranges from 100 wavelength of the operating frequency to 400 wavelength of the operating frequency.

36 MATERIALS SCIENCE↗

Characterization of the liquid sodium spray generated by a pipework hole

Due to its advantageous thermodynamic characteristics at high temperature (550 deg. C), liquid sodium is the main candidate to be the cooling fluid for Generation TV nuclear reactors SFR (Sodium-cooled Fast Reactors). Now, sodium reacts very violently, both with the water and the oxygen of the air. Only few data were known about the liquid sodium behaviour when spread in the environment through micro defects. These are often present in a cooling circuit in welded or sealed joints and more rarely in the pipes. Micro defects, on the other hand, can be also generated in a cooling circuit because of the vibrations always present in a circuit into which a fluid runs. A new set-up, named LISOF, was built for testing high temperature liquid sodium when passing through micro defects and generating sprays or jets. Sprays and jets were generated by means of nozzles embedding sub milli-metric holes the diameter of which was: 0.2 mm, 0.4 mm, 0.5 mm. Tests were performed by pressurizing liquid sodium (550 deg. C) at: 3, 6 and 9 barg. Normal and high speed cinematography were used for the direct observation of the liquid sodium sprays while Phase Doppler Interferometry was used for the measurement of the droplets characteristics and velocity. Tests concerning the behaviour of the high temperature liquid sodium firing in air or in contact with the cement cover applied to a scaled down core catcher simulacrum were also performed. The paper presents the built set-up and the collected results. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Combined Effect of the Wegener–Bergeron–Findeisen Mechanism and Large Eddies on Microphysics of Mixed-Phase Stratiform Clouds

Abstract The process of glaciation in mixed-phase stratiform clouds was investigated by a novel Lagrangian–Eulerian model (LEM) in which thousands of adjoining Lagrangian parcels moved within a turbulent-like velocity field with statistical parameters typical of the Arctic boundary layer. We used detailed bin microphysics to describe the condensation/evaporation processes in each parcel, in which droplets, aerosols, and ice particles were described using size distributions of 500 mass bins. The model also calculated aerosol mass inside droplets and ice particles. Gravitational sedimentation of droplets and ice particles was also accounted for. Assuming that droplet freezing is the primary source of ice particles, the Arctic clouds observed in Indirect and Semi-Direct Aerosol Campaign (ISDAC) were successfully simulated. The model showed that at a low ice particle concentration typical of ISDAC, large vortices (eddies) led to a quasi-stationary regime, in which mixed-phase St existed for a long time. The large eddies controlled the water partitioning in the mixed-phase clouds. Droplets formed and grew in updrafts, typically reaching the cloud top, and evaporated in downdrafts. Ice particles grew in updrafts and downdrafts. The Wegener–Bergeron–Findeisen (WBF) mechanism was efficient in downdrafts and some parts of updrafts, depending on ice concentration and vertical velocity. At low ice concentrations, the effect of ice on the phase partitioning was negligible. In this regime, liquid droplets were found near the cloud top, whereas ice particles precipitated through the cloud base. When ice concentration exceeded about 10 L −1 , the WBF mechanism led to glaciation of almost the entire cloud, with the exception of narrow cloud regions associated with strong updrafts. At ice particle concentrations of a few tens per liter, the oscillatory regime took place due to the ice–liquid interaction. The microphysical structure of mixed-phase St forms as a combined effect of cloud dynamics (large eddies) and the WBF mechanism.

54 ENVIRONMENTAL SCIENCES↗

Measurements of parallel electron velocity distributions using whistler wave absorption

We describe a diagnostic to measure the parallel electron velocity distribution in a magnetized plasma that is overdense ({omega}{sub pe} > {omega}{sub ce}). This technique utilizes resonant absorption of whistler waves by electrons with velocities parallel to a background magnetic field. The whistler waves were launched and received by a pair of dipole antennas immersed in a cylindrical discharge plasma at two positions along an axial background magnetic field. The whistler wave frequency was swept from somewhat below and up to the electron cyclotron frequency {omega}{sub ce}. As the frequency was swept, the wave was resonantly absorbed by the part of the electron phase space density which was Doppler shifted into resonance according to the relation {omega}-k{sub ||v||} = {omega}{sub ce}. The measured absorption is directly related to the reduced parallel electron distribution function integrated along the wave trajectory. The background theory and initial results from this diagnostic are presented here. Though this diagnostic is best suited to detect tail populations of the parallel electron distribution function, these first results show that this diagnostic is also rather successful in measuring the bulk plasma density and temperature both during the plasma discharge and into the afterglow.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Lithospheric velocity structure of the Anatolian plateau-Caucasus-Caspian region

The Anatolian plateau-Caucasus-Caspian region is an area of complex lithospheric structure accompanied by large variations in seismic wave velocities. Despite the complexity of the region, little is known about the detailed lithospheric structure. Using data from 31 new, permanent broadband seismic stations along with results from a previous 29 temporary seismic stations and 3 existing global seismic stations in the region, a 3-D velocity model is developed using joint inversion of teleseismic receiver functions and surface waves. Both group and phase dispersion curves (Love and Rayleigh) were derived from regional and teleseismic events. Additional Rayleigh wave group dispersion curves were determined using ambient noise correlation. Receiver functions were calculated using P arrivals from 789 teleseismic (30°–90°) earthquakes. The stacked receiver functions and surface wave dispersion curves were jointly inverted to yield the absolute shear wave velocity to a depth of 100 km at each station. The depths of major discontinuities (sediment-basement, crust-mantle, and lithosphere-asthenosphere) were inferred from the velocity-depth profiles at the location of each station. Distinct spatial variations in crustal and upper mantle shear velocities were observed. The Kura basin showed slow (~2.7–2.9 km/s) upper crustal (0–11 km) velocities but elevated (~3.8–3.9 km/s) velocities in the lower crust. The Anatolian plateau varied from ~3.1–3.2 in the upper crust to ~3.5–3.7 in the lower crust, while velocities in the Arabian plate (south of the Bitlis suture) were slightly faster (upper crust between 3.3 and 3.4 km/s and lower crust between 3.8 and 3.9 km/s). The depth of the Moho, which was estimated from the shear velocity profiles, was 35 km in the Arabian plate and increased northward to 54 km at the southern edge of the Greater Caucasus. Moho depths in the Kura and at the edge of the Caspian showed more spatial variability but ranged between 35 and 45 km. Upper mantle velocities were slow under the Anatolian plateau but increased to the south under the Arabian plate and to the east (4.3–4.4 km/s) under the Kura basin and Greater Caucasus. The areas of slow mantle coincided with the locations of Holocene volcanoes. Differences between Rayleigh and Love dispersions at long wavelengths reveal a pronounced variation in anisotropy between the Anatolian plateau and the Kura basin.

58 GEOSCIENCES↗

Two-phase pressure drop due to a spacer grid in a heated rod bundle

The present study investigates the effect of a spacer grid on two-phase pressure drop in a heated rod bundle with similar configuration to that used in a pressurized water reactor (PWR). Data from the Rod Bundle Heat Transfer (RBHT) facility at Penn State was used to compare with the existing models available in the literature. Steady state two-phase flow tests were performed in the rod bundle with liquid inlet conditions varying over the Reynolds number (Re) range of 140 < Re < 2200. At the spacer grid of interest, the mass quality (x) varies from 0.02 < x < 0.9. The pressure drop due to the spacer grid was found to vary significantly with the superficial vapor velocity. In addition to model comparison, an alternative approach involving the use of an effective two-phase grid loss coefficient is proposed to account for the two-phase pressure drop due to the spacer grid. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

CONFIRMATION OF HOT JUPITER KEPLER-41b VIA PHASE CURVE ANALYSIS

We present high precision photometry of Kepler-41, a giant planet in a 1.86 day orbit around a G6V star that was recently confirmed through radial velocity measurements. We have developed a new method to confirm giant planets solely from the photometric light curve, and we apply this method herein to Kepler-41 to establish the validity of this technique. We generate a full phase photometric model by including the primary and secondary transits, ellipsoidal variations, Doppler beaming, and reflected/emitted light from the planet. Third light contamination scenarios that can mimic a planetary transit signal are simulated by injecting a full range of dilution values into the model, and we re-fit each diluted light curve model to the light curve. The resulting constraints on the maximum occultation depth and stellar density combined with stellar evolution models rules out stellar blends and provides a measurement of the planet's mass, size, and temperature. We expect about two dozen Kepler giant planets can be confirmed via this method.

79 ASTRONOMY AND ASTROPHYSICS↗

H{sub α} SPECTRAL DIVERSITY OF TYPE II SUPERNOVAE: CORRELATIONS WITH PHOTOMETRIC PROPERTIES

We present a spectroscopic analysis of the H{sub α} profiles of hydrogen-rich Type II supernovae. A total of 52 Type II supernovae having well-sampled optical light curves and spectral sequences were analyzed. Concentrating on the H{sub α} P-Cygni profile we measure its velocity from the FWHM of the emission and the ratio of absorption to emission (a/e) at a common epoch at the start of the recombination phase, and search for correlations between these spectral parameters and photometric properties of the V-band light curves. Testing the strength of various correlations we find that a/e appears to be the dominant spectral parameter in terms of describing the diversity in our measured supernova properties. It is found that supernovae with smaller a/e have higher H{sub α} velocities, more rapidly declining light curves from maximum during the plateau and radioactive tail phase, are brighter at maximum light, and have shorter optically thick phase durations. We discuss possible explanations of these results in terms of physical properties of Type II supernovae, speculating that the most likely parameters that influence the morphologies of H{sub α} profiles are the mass and density profile of the hydrogen envelope, together with additional emission components due to circumstellar interaction.

79 ASTRONOMY AND ASTROPHYSICS↗

A detailed analysis of the high-resolution X-ray spectra of NGC 3516: variability of the ionized absorbers

The 1.5 Seyfert galaxy NGC 3516 presents a strong time variability in X-rays. We re-analyzed the nine observations performed in 2006 October by XMM-Newton and Chandra in the 0.3 to 10 keV energy band. An acceptable model was found for the XMM-Newton data fitting the EPIC-PN and RGS spectra simultaneously; later, this model was successfully applied to the contemporary Chandra high-resolution data. The model consists of a continuum emission component (power law + blackbody) absorbed by four ionized components (warm absorbers), and 10 narrow emission lines. Three absorbing components are warm, producing features only in the soft X-ray band. The fourth ionization component produces Fe XXV and Fe XXVI in the hard-energy band. We study the time response of the absorbing components to the well-detected changes in the X-ray luminosity of this source and find that the two components with the lower ionization state show clear opacity changes consistent with gas close to photoionization equilibrium. These changes are supported by the models and by differences in the spectral features among the nine observations. On the other hand, the two components with higher ionization state do not seem to respond to continuum variations. The response time of the ionized absorbers allows us to constrain their electron density and location. We find that one component (with intermediate ionization) must be located within the obscuring torus at a distance 2.7 × 10{sup 17} cm from the central engine. This outflowing component likely originated in the accretion disk. The three remaining components are at distances larger than 10{sup 16}-10{sup 17} cm. Two of the absorbing components in the soft X-rays have similar outflow velocities and locations. These components may be in pressure equilibrium, forming a multi-phase medium, if the gas has metallicity larger than the solar one (≳ 5 Z {sub ☉}). We also search for variations in the covering factor of the ionized absorbers (although partial covering is not required in our models). We find no correlation between the change in covering factor and the flux of the source. This, in connection with the observed variability of the ionized absorbers, suggests that the changes in flux are not produced by this material. If the variations are indeed produced by obscuring clumps of gas, these must be located much closer in to the central source.

79 ASTRONOMY AND ASTROPHYSICS↗

DEMONSTRATION OF A DATA-DRIVEN PHYSICS-BASED APPROACH FOR COMPUTATIONALLY EFFICIENT CFD PREDICTION OF TWO-PHASE BUBBLY FLOW

To realize efficient computational fluid dynamics (CFD) prediction of two-phase flow, a multi-scale physics-guided data-driven approach, Feature Similarity Measurement (FSM) technique was developed for error estimation in two-phase flow simulation using coarse-mesh CFD, to achieve a comparable accuracy as fine-mesh simulations with fast-running feature. By defining physics-guided parameters and variable gradients as physical features, FSM has the capability to capture the underlying local patterns in the coarse-mesh CFD simulation. Massive low-fidelity data and respective high-fidelity data are used to explore the underlying information relevant to the main simulation errors and the effects of phenomenological scaling. By learning from previous simulation data, a surrogate model using deep feedforward neural network (DFNN) can be developed and trained to estimate the simulation error of coarse-mesh CFD. In a demonstration case of two-phase bubbly flow, the DFNN model well captured and corrected the unphysical “peaks” in the velocity and void fraction profiles near the wall in the coarse-mesh configuration, even for extrapolative predictions. The research documented supports the feasibility of the physics-guided deep learning methods for coarse mesh CFD simulations which has a potential for the efficient industrial design.

42 ENGINEERING↗

CLASSY III. The Properties of Starburst-driven Warm Ionized Outflows

We report the results of analyses of galactic outflows in a sample of 45 low-redshift starburst galaxies in the COS Legacy Archive Spectroscopic SurveY (CLASSY), augmented by five additional similar starbursts with Cosmic Origins Spectrograph (COS) data. The outflows are traced by blueshifted absorption lines of metals spanning a wide range of ionization potential. The high quality and broad spectral coverage of CLASSY data enable us to disentangle the absorption due to the static interstellar medium (ISM) from that due to outflows. We further use different line multiplets and doublets to determine the covering fraction, column density, and ionization state as a function of velocity for each outflow. We measure the outflow's mean velocity and velocity width, and find that both correlate in a highly significant way with the star formation rate, galaxy mass, and circular velocity over ranges of four orders of magnitude for the first two properties. We also estimate outflow rates of metals, mass, momentum, and kinetic energy. We find that, at most, only about 20% of silicon created and ejected by supernovae in the starburst is carried out in the warm phase we observe. The outflows' mass-loading factor increases steeply and inversely with both circular and outflow velocity (log–log slope ~–1.6), and reaches ~10 for dwarf galaxies. We find that the outflows typically carry about 10%–100% of the momentum injected by massive stars and about 1%–20% of the kinetic energy. We show that these results place interesting constraints on, and new insights into, models and simulations of galactic winds.

79 ASTRONOMY AND ASTROPHYSICS↗

Computationally efficient CFD prediction of bubbly flow using physics-guided deep learning

To realize efficient computational fluid dynamics (CFD) prediction of two-phase flow, a multi-scale framework was proposed in this paper by applying a physics-guided data-driven approach. Instrumental to this framework, Feature Similarity Measurement (FSM) technique was developed for error estimation in two-phase flow simulation using coarse-mesh CFD, to achieve a comparable accuracy as fine-mesh simulations with fast-running feature. In this work, by defining physics-guided parameters and variable gradients as physical features, FSM has the capability to capture the underlying local patterns in the coarse-mesh CFD simulation. Massive low-fidelity data and respective high-fidelity data are used to explore the underlying information relevant to the main simulation errors and the effects of phenomenological scaling. By learning from previous simulation data, a surrogate model using deep feedforward neural network (DFNN) can be developed and trained to estimate the simulation error of coarse-mesh CFD. In a demonstration case of two-phase bubbly flow, the DFNN model well captured and corrected the unphysical “peaks” in the velocity and void fraction profiles near the wall in the coarse-mesh configuration, even for extrapolative predictions. The research documented supports the feasibility of the physics-guided deep learning methods for coarse mesh CFD simulations which has a potential for the efficient industrial design.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Kinematic modeling of the Milky Way using the RAVE and GCS stellar surveys

We investigate the kinematic parameters of the Milky Way disk using the Radial Velocity Experiment (RAVE) and Geneva-Copenhagen Survey (GCS) stellar surveys. We do this by fitting a kinematic model to the data and taking the selection function of the data into account. For stars in the GCS we use all phase-space coordinates, but for RAVE stars we use only (ℓ, b, v {sub los}). Using the Markov Chain Monte Carlo technique, we investigate the full posterior distributions of the parameters given the data. We investigate the age-velocity dispersion relation for the three kinematic components (σ {sub R}, σ{sub φ}, σ {sub z}), the radial dependence of the velocity dispersions, the solar peculiar motion (U {sub ☉}, V {sub ☉}, W {sub ☉}), the circular speed Θ{sub 0} at the Sun, and the fall of mean azimuthal motion with height above the midplane. We confirm that the Besançon-style Gaussian model accurately fits the GCS data but fails to match the details of the more spatially extended RAVE survey. In particular, the Shu distribution function (DF) handles noncircular orbits more accurately and provides a better fit to the kinematic data. The Gaussian DF not only fits the data poorly but systematically underestimates the fall of velocity dispersion with radius. The radial scale length of the velocity dispersion profile of the thick disk was found to be smaller than that of the thin disk. We find that correlations exist between a number of parameters, which highlights the importance of doing joint fits. The large size of the RAVE survey allows us to get precise values for most parameters. However, large systematic uncertainties remain, especially in V {sub ☉} and Θ{sub 0}. We find that, for an extended sample of stars, Θ{sub 0} is underestimated by as much as 10% if the vertical dependence of the mean azimuthal motion is neglected. Using a simple model for vertical dependence of kinematics, we find that it is possible to match the Sgr A* proper motion without any need for V {sub ☉} being larger than that estimated locally by surveys like GCS.

79 ASTRONOMY AND ASTROPHYSICS↗

Rolling hills on the core-mantle boundary

Recent results suggest that an iron-rich oxide may have fractionally crystallized from a primordial magma ocean and settled on the core–mantle boundary (CMB). Based on experimental results, the presence of only a few percent of Fe-rich oxide could slow seismic waves down by several percent. This heavy layer can become highly undulating as predicted from dynamic modeling but can remain as a distinct structure with uniform velocity reductions. Here, we use the large USArray seismic network to search for such structures. Strong constraints on D" are provided by the core-phase SKS where it bifurcates, containing a short segment of P-wave diffractions (P d ) when crossing the CMB, called SKS d . Synthetics from models with moderate velocity drops (less than 10%) involving a layer with variable thickness, perhaps a composite of sharp small structures, with strong variation in thickness can explain both the observed SKS d waveforms and large scatter in differential times between SKKS and SKS. A smooth 3D image is obtained from inverting SKS d waveforms displaying rolling-hills with elongated dome-like structures sitting on the CMB. The most prominent one has an 80-km height, ~8° length, and ~4° width, thus adding still more structural complexity to the lower mantle. We suggest that these results can be explained by a dynamically-stabilized material containing small amounts (~5%) iron-rich (Mg,Fe)O providing a self-consistent physical interpretation.

Sun, Daoyuan↗

THE COSMIC EVOLUTION OF MASSIVE BLACK HOLES AND GALAXY SPHEROIDS: GLOBAL CONSTRAINTS AT REDSHIFT z {approx}< 1.2

We study observational constraints on the cosmic evolution of the relationships between massive black hole (MBH) mass (M{sub .}) and stellar mass (M{sub *,sph}; or velocity dispersion {sigma}) of a host galaxy/spheroid. Assuming that the M{sub .}-M{sub *,sph} (or M{sub .}-{sigma}) relation evolves with redshift as {proportional_to}(1 + z){sup {Gamma}}, the MBH mass density can be obtained from either the observationally determined galaxy stellar mass functions or velocity dispersion distribution functions over redshift z {approx} 0-1.2 for any given {Gamma}. The MBH mass density at different redshifts can also be inferred from the luminosity function of QSOs/active galactic nuclei (AGNs) provided the radiative efficiency {epsilon} is known. By matching the MBH density inferred from galaxies to that obtained from QSOs/AGNs, we find that {Gamma} = 0.64{sup +0.27}{sub -0.29} for the M{sub .}-M{sub *,sph} relation and {Gamma} = -0.21{sup +0.28}{sub -0.33} for the M{sub .}-{sigma} relation, and {epsilon} = 0.11{sup +0.04}{sub -0.03}. Our results suggest that MBH mass growth precedes bulge mass growth but that the galaxy velocity dispersion does not increase with the mass growth of the bulge after nuclear activity is quenched, which is roughly consistent with the two-phase galaxy formation scenario proposed by Oser et al. in which a galaxy roughly doubles its mass after z = 1 due to accretion and minor mergers while its velocity dispersion drops slightly.

79 ASTRONOMY AND ASTROPHYSICS↗

SN 2013ej: A type IIL supernova with weak signs of interaction

We present optical photometric and spectroscopic observations of SN 2013ej. It is one of the brightest Type II supernovae (SNe II) exploded in a nearby (∼10 Mpc) galaxy, NGC 628. The light-curve characteristics are similar to SNe II, but with a relatively shorter (∼85 days) and steeper (∼1.7 mag (100 days){sup −1} in V) plateau phase. The SN shows a large drop of 2.4 mag in V-band brightness during the plateau-to-nebular transition. The absolute ultraviolet (UV) light curves are identical to SN 2012aw, showing a similar UV-plateau trend extending up to 85 days. The radioactive {sup 56}Ni mass estimated from the tail luminosity is 0.02 M{sub ⊙}, which is significantly lower than typical SNe IIP. The characteristics of spectral features and evolution of line velocities indicate that SN 2013ej is a Type II event. However, light-curve characteristics and some spectroscopic features provide strong support in classifying it as a Type IIL event. A detailed synow modeling of spectra indicates the presence of some high-velocity components in Hα and Hβ profiles, implying a possible ejecta–circumstellar medium interaction. The nebular phase spectrum shows an unusual notch in the Hα emission, which may indicate bipolar distribution of {sup 56}Ni. Modeling of the bolometric light curve yields a progenitor mass of ∼14 M{sub ⊙} and a radius of ∼450 R{sub ⊙}, with a total explosion energy of ∼2.3×10{sup 51} erg.

79 ASTRONOMY AND ASTROPHYSICS↗

Nonlinear transport, dynamic ordering, and clustering for driven skyrmions on random pinning

Using numerical simulations, we examine the nonlinear dynamics of skyrmions driven over random pinning. For weak pinning, the skyrmions depin elastically, retaining sixfold ordering; however, at the onset of motion there is a dip in the magnitude of the structure factor peaks due to a decrease in positional ordering, indicating that the depinning transition can be detected using the structure factor even within the elastic depinning regime. At higher drives, the moving skyrmion lattice regains full ordering. For increasing pinning strength, we find a transition from elastic to plastic depinning that is accompanied by a sharp increase in the depinning threshold due to the proliferation of topological defects, similar to the peak effect found at the elastic to plastic depinning transition in superconducting vortex systems. For strong pinning and strong Magnus force, the skyrmions in the moving phase can form a strongly clustered or phase-separated state with highly modulated skyrmion density, similar to that recently observed in continuum-based simulations for strong disorder. As the Magnus force is decreased, the density phase-separated state crosses over to a dynamically phase-separated state with uniform density but with flow localized in bands of motion, while in the strongly damped limit, both types of phase-separated states are lost. In the strong pinning limit, we find highly nonlinear velocity-force curves in the transverse and longitudinal directions, along with distinct regions of negative differential conductivity in the plastic flow regime. The negative differential conductivity is absent in the overdamped limit. In conclusion, the Magnus force is responsible for both the negative differential conductivity and the clustering effects since it causes faster moving skyrmions to partially rotate around slower moving or pinned skyrmions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗