Search NASA⌕ Search

SEARCH · Search NASA

Results for “Particle characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Tracer particle transport dynamics in the diffusive sandpile cellular automaton

The confinement properties of the diffusive running sandpile are characterized by tracking the motion of a population of marked grains of sand. It is found that, as the relative strength of the avalanching to the diffusive transport channel is varied, a point is reached at which the particle global confinement time and the probability density functions of the jump-sizes and waiting-times of the tracked grains experience a sudden change, thus revealing a dynamical transition, that is consistent with previous studies (Newman DE et al., Phys Rev Lett 2002;88(20):204304). Across this transition, the sandpile moves from a regime characterized by self-similarity and memory, where avalanches of all possible sizes dominate transport across the system, to another regime where transport is taken over by near system-size, quasi-periodic avalanches. Values for the fractional transport exponents that quantify effective transport across the sandpile prior to the transition are also obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRSDate not supplied

Comparing Particle Flow Regimes in the L2K Arcjet with Martian Entry Conditions

In this study, the US3D-DUST code will be used to simulate particles in the L2K dusty-flow test environments and compare them to conditions in the shock layer of the Schiaparelli capsule during its entry into the Martian atmosphere in 2016. The particle Reynolds, Mach, and Knudsen numbers, key non-dimensional numbers that characterize the dusty-flow environments, will be compared between the L2K and Martian shock layers. This study will provide a preliminary assessment of how well-suited L2K dusty-flow conditions are for particle drag model validation and the development of particle impact surface damage correlations. The results of this study may help to guide the design of future dusty flow environments in the L2K facility

Dusty flow↗
DOE OSTI2021

Turn-key constrained parameter space exploration for particle accelerators using Bayesian active learning

Abstract Particle accelerators are invaluable discovery engines in the chemical, biological and physical sciences. Characterization of the accelerated beam response to accelerator input parameters is often the first step when conducting accelerator-based experiments. Currently used techniques for characterization, such as grid-like parameter sampling scans, become impractical when extended to higher dimensional input spaces, when complicated measurement constraints are present, or prior information known about the beam response is scarce. Here in this work, we describe an adaptation of the popular Bayesian optimization algorithm, which enables a turn-key exploration of input parameter spaces. Our algorithm replaces the need for parameter scans while minimizing prior information needed about the measurement’s behavior and associated measurement constraints. We experimentally demonstrate that our algorithm autonomously conducts an adaptive, multi-parameter exploration of input parameter space, potentially orders of magnitude faster than conventional grid-like parameter scans, while making highly constrained, single-shot beam phase-space measurements and accounts for costs associated with changing input parameters. In addition to applications in accelerator-based scientific experiments, this algorithm addresses challenges shared by many scientific disciplines, and is thus applicable to autonomously conducting experiments over a broad range of research topics.

43 PARTICLE ACCELERATORS↗
NASA NTRS1992

Multiple dataset water-quality analyses in the vicinity of an ocean wastewater plume

The White's Point ocean outfall is the method of disposal for approximately 374 million gallons of treated wastewater per day from Los Angeles County. The photosynthetic characteristics and particle distributions have well-defined properties that can be exploited to yield information on transport of the plume, mixing dynamics, and resuspension of bottom sediments during periods of bottom current velocity in excess of ca. 0.1 m/s. This plume of particles serves as a conservative tracer, which was studied using a number of sampling platforms and strategies, including underway sawtooth, or 'tow-yo' sampling, moored arrays of instruments, stationary profiling, and now for the first time with remotely-sensed multispectral color imagery. Research in this area previously focused on examination of the plume as it relates to the local current field and transport of particles, and on the resuspension of bottom sediments during periods of increased currents. In addition, Wu et al elucidated techniques for separating the particle signal into photosynthetic and nonphotosynthetic components, based on the beam attenuation to chlorophyll fluorescence ratio. High-frequency time series measurements of the current field and bio-optical characteristics at a site close to the waste diffusers were also collected. These are being analyzed for the spectral characteristics of the longer-timescale variability, in order to predict particle transport through simple meteorological measurements. With the advent of high spectral and spatial resolution imaging spectrometers such as AVIRIS, it is now possible to construct causal relationships between particle distributions and signature of the upwelled radiance from the surface. The availability of a constant and well-characterized source of material lends itself well to models which predict upwelled radiance from the surface. The availability of a constant and well-characterized source of material lends itself well to models which predict upwelled light as a function of particle distributions, photosynthetic pigments, colored dissolved organic material, and detrital and degradation products of photosynthesis. In addition, the spatial coverage provided by the tow-yo sampling device, combined with the profile measurements of the light field, should facilitate the best inverse modeling attempts possible thus far.

Hamilton, Michael↗
NASA NTRS2013

The Hayabusa Curation Facility at Johnson Space Center

The Japan Aerospace Exploration Agency (JAXA) Hayabusa spacecraft made contact with the asteroid 25143 Itokawa and collected regolith dust from Muses Sea region of smooth terrain [1]. The spacecraft returned to Earth with more than 10,000 grains ranging in size from just over 300 μm to less than 10 μm [2, 3]. These grains represent the only collection of material returned from an asteroid by a spacecraft. As part of the joint agreement between JAXA and NASA for the mission, 10% of the Hayabusa grains are being transferred to NASA for parallel curation and allocation. In order to properly receive process and curate these samples, a new curation facility was established at Johnson Space Center (JSC). Since the Hayabusa samples within the JAXA curation facility have been stored free from exposure to terrestrial atmosphere and contamination [4], one of the goals of the new NASA curation facility was to continue this treatment. An existing lab space at JSC was transformed into a 120 sq.ft. ISO class 4 (equivalent to the original class 10 standard) clean room. Hayabusa samples are stored, observed, processed, and packaged for allocation inside a stainless steel glove box under dry N2. Construction of the clean laboratory was completed in 2012. Currently, 25 Itokawa particles are lodged in NASA's Hayabusa Lab. Special care has been taken during lab construction to remove or contain materials that may contribute contaminant particles in the same size range as the Hayabusa grains. Several witness plates of various materials are installed around the clean lab and within the glove box to permit characterization of local contaminants at regular intervals by SEM and mass spectrometry, and particle counts of the lab environment are frequently acquired. Of particular interest is anodized aluminum, which contains copious sub-mm grains of a multitude of different materials embedded in its upper surface. Unfortunately the use of anodized aluminum was necessary in the construction of the clean room frame to strengthen it and eliminate corrosion and wear over time. All anodized aluminum interior to the lab was thus covered or replaced by minimally contaminating materials.

Zolensky, M.↗
NASA NTRS2016

First-Principles Modeling Of Electromagnetic Scattering By Discrete and Discretely Heterogeneous Random Media

A discrete random medium is an object in the form of a finite volume of a vacuum or a homogeneous material medium filled with quasi-randomly and quasi-uniformly distributed discrete macroscopic impurities called small particles. Such objects are ubiquitous in natural and artificial environments. They are often characterized by analyzing theoretically the results of laboratory, in situ, or remote-sensing measurements of the scattering of light and other electromagnetic radiation. Electromagnetic scattering and absorption by particles can also affect the energy budget of a discrete random medium and hence various ambient physical and chemical processes. In either case electromagnetic scattering must be modeled in terms of appropriate optical observables, i.e., quadratic or bilinear forms in the field that quantify the reading of a relevant optical instrument or the electromagnetic energy budget. It is generally believed that time-harmonic Maxwell's equations can accurately describe elastic electromagnetic scattering by macroscopic particulate media that change in time much more slowly than the incident electromagnetic field. However, direct solutions of these equations for discrete random media had been impracticable until quite recently. This has led to a widespread use of various phenomenological approaches in situations when their very applicability can be questioned. Recently, however, a new branch of physical optics has emerged wherein electromagnetic scattering by discrete and discretely heterogeneous random media is modeled directly by using analytical or numerically exact computer solutions of the Maxwell equations. Therefore, the main objective of this Report is to formulate the general theoretical framework of electromagnetic scattering by discrete random media rooted in the Maxwell- Lorentz electromagnetics and discuss its immediate analytical and numerical consequences. Starting from the microscopic Maxwell-Lorentz equations, we trace the development of the first principles formalism enabling accurate calculations of monochromatic and quasi-monochromatic scattering by static and randomly varying multiparticle groups. We illustrate how this general framework can be coupled with state-of-the-art computer solvers of the Maxwell equations and applied to direct modeling of electromagnetic scattering by representative random multi-particle groups with arbitrary packing densities. This first-principles modeling yields general physical insights unavailable with phenomenological approaches. We discuss how the first-order-scattering approximation, the radiative transfer theory, and the theory of weak localization of electromagnetic waves can be derived as immediate corollaries of the Maxwell equations for very specific and well-defined kinds of particulate medium. These recent developments confirm the mesoscopic origin of the radiative transfer, weak localization, and effective-medium regimes and help evaluate the numerical accuracy of widely used approximate modeling methodologies.

Michael I Mishchenko↗
DOE OSTI2024

Inscribing geodesic circles on the face of the superstratum

Abstract We use families of circular null geodesics as probes of a family of microstate geometries, known as (1,0, n) superstrata. These geometries carry a left-moving momentum wave and the behavior of some of the geodesic probes is very sensitive to this background wave. The left-moving geodesics behave like BPS particles and so can be placed in circular orbits anywhere in the geometry and actually “float” at fixed radius and angle in the three-dimensional “capped BTZ” geometry. The right-moving geodesics behave like non-BPS particles. We show that they provide a simple geometric characterization of the black-hole bound: when the momentum charge of the geometry is below this bound, such geodesics can be placed anywhere, but exceeding the bound, even by a small amount, means these geodesics are restricted to the deep interior of the geometry. We also show that for left-moving string probes, the tidal forces remain comparable with those of global AdS 3 . Nevertheless, for some of these probes, the “bumps” in the geometry induce an oscillatory mass term and we discuss how this can lead to chaotic scrambling of the state of the string.

Physics↗
DOE OSTI2026

Characterizing microscale signatures in uranium ore concentrates using electron probe microanalyzer

Impurities in uranium ore concentrates (UOCs) serve as forensic signatures of processing history and origin. Here, this study utilizes Electron Probe Microanalyzer (EPMA) to characterize microscale compositional and textural features in individual UOC particles from both commercial and bench-scale production. At the particle scale, multiple internal phases with distinct morphologies, chemical signatures, and stoichiometries are documented. Our data shows that chemical impurities are heterogeneously distributed within single particles and among particles within a sample. These microscale heterogeneities correlate with known processing histories, indicating that microscale signatures of early fuel cycle materials can provide valuable information for nuclear forensic material analysis.

organic↗
DOE OSTI2019

Effect of Forging on Microstructure, Mechanical Properties and Acoustic Emission Characteristics of Al Alloy (2014): 10 wt.% SiC{sub p} Composite

In this paper a systematic study has been undertaken to study the effect of forging on microstructure, mechanical properties and acoustic emission (AE) characteristics of Al alloy (2014)—10 wt.% SiC metal-matrix composites. Hammer forging was carried out at a temperature of 470 °C in an open die, with a deformation ratio of 3.5:1. Microstructural analyses were carried out at three different positions of forged billet. Significant material flow was observed in the sample taken from the sides of the forged billet, but no appreciable material flow was observed at the center of the forged billet. The microstructural characterization showed that forging resulted in cracking of SiC particles in Al alloy (2014)—10 wt.% SiC composite. The AE results during forging showed an increase in AE signal intensity during the initial yielding period and a subsequent decrease in the intensity of AE signals with sudden burst at the end of the forging. The plastic deformation at room temperature was less ductile in nature but at high temperature, appreciable ductility was observed. The FESEM micrographs of fracture surfaces of the tensile specimens showed appreciable clustering of SiC particles during plastic deformation both at room and high temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Low-pressure methanol synthesis from CO 2 over metal-promoted Ni-Ga intermetallic catalysts

Ni-Ga and M-Ni-Ga (M = Au, Co, Cu) catalysts were evaluated for methanol synthesis from CO 2 at 10 bar and 200-270°C. The following trend in turnover frequency (TOF) for CO 2 hydrogenation was observed: AuNiGa > CuNiGa > NiGa > CoNiGa, where TOF increased with decreasing catalyst affinity for CO. The presence of a third metal was found to influence both the formation of the Ni-Ga intermetallic phase as well as the number of available sites for CO chemisorption. Phase formation, catalyst composition and stability were evaluated using therm ogravimetric analysis (TGA), X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning transmission electron microscopy and energy dispersive X-ray spectroscopy (STEM-EDX). Au-Ni-Ga, which showed a nearly 4-fold improvement in TOF at 263°C and 10 bar compared to Ni-Ga, consisted of Ni 3 Ga particles decorated with Au, as evidenced by post catalysis characterization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Determination of preferential binder oxidation in HTGR matrix material subjected to high temperature steam

Graphitic matrix material encapsulates tristructural isotropic (TRISO) coated fuel particles and is a structural component for both pebble and cylindrical fuel compacts in high temperature gas reactor (HTGR) designs. In an off-normal event involving steam exposure, the matrix material is exposed to oxidants, leading to degradation of the fuel compact and subsequent exposure of the TRISO particle fuel to oxidizing species. This study presents microstructural characterization of matrix material after exposure to high temperature (1200°C), 48 kPa steam in which the evolved microstructure demonstrated nonuniform degradation. Subsequent Raman spectroscopy determined the nature of the remaining material post-exposure. Finally, the electron microscopy characterization suggests and Raman spectroscopic analysis confirms, under off-normal conditions, the carbonized phenolic resin binder is preferentially oxidized ahead of the graphite flake filler and is responsible for the nonuniform degradation and enhanced depth of attack.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Mesoporous Ag/In{sub 2}O{sub 3} composite derived from indium organic framework as high performance formaldehyde sensor

Mesoporous Ag/In{sub 2}O{sub 3} composite materials with different concentrations of Ag particles have been prepared by the calcination of Ag{sup +}-entrapped indium-organic frameworks (InOFs). The structures and components of these MOF-derived Mesoporous Ag/In{sub 2}O{sub 3} composite materials have been characterized thoroughly. Gas sensing measurements indicated that the incorporation of metallic Ag particles into the mesoporous structure significantly improves the gas-sensing properties of In{sub 2}O{sub 3}. Specially, the response of 5% Ag-loaded In{sub 2}O{sub 3} sensor to 50 ppm formaldehyde is 5 times higher than that of pure In{sub 2}O{sub 3} particles at 210 °C, which is among the best formaldehyde sensor materials reported to date. Also, Ag/In{sub 2}O{sub 3} composite sensor exhibit short response time (~22 s) and excellent recovery. These results indicated that the InOF-derived mesoporous Ag/In{sub 2}O{sub 3} materials maybe can be used to fabricate high performance formaldehyde sensors in practice. - Graphical abstract: Mesoporous Ag/In{sub 2}O{sub 3} materials have been produced by calcining indium-organic frameworks showing very fast and extremely high response towards HCHO. - Highlights: • Thermal decomposition of indium-organic framework. • Ag-loaded mesoporous In{sub 2}O{sub 3} materials. • Fast and high responses to HCHO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

General study on the crystal, electronic and band structures, the morphological characterization, and the magnetic properties of the Sr{sub 2}DyRuO{sub 6} complex perovskite

A comprehensive investigation of the general properties of the Sr{sub 2}DyRuO{sub 6} complex perovskite was undertaken. Crystal structure characterization performed by X-ray diffraction measurements and Rietveld analysis allowed establishing that the material crystallizes in a distorted monoclinic perovskite-like structure belonging to the P2{sub 1}/n (#14) space group, with alternating distribution of Dy{sup 3} {sup +} (2c: 0, 0.5, 0) and Ru{sup 5} {sup +} (2d: 0.5, 0, 0). Because of the mismatch in the ionic radii, the DyO{sub 6} and RuO{sub 6} octahedra are forced to tilt around the cubic directions so as to optimize the Sr–O inter-atomic bond lengths. Morphological characterization carried out by scanning electron microscopy indicated a particle size D = 37.17 nm and an activation energy Q = 109.8 kJ/mol. Semi-quantitative compositional study, performed through energy-dispersive X-ray experiments, corroborated that the pure phase of the Sr{sub 2}DyRuO{sub 6} was correctly obtained. Magnetic properties determined from the fit of the Curie–Weiss law to the curves of magnetic susceptibility as a function of temperature showed that Sr{sub 2}DyRuO{sub 6} exhibits an antiferromagnetic-like behavior at low temperatures as a consequence of a magnetic transition at T = 38 K. Data collected with respect to the field dependence of the magnetization showed the existence of a weak ferromagnetic moment relationship with antiferromagnetic-like behavior. Density functional theory allowed establishing the optimum electronic structure for Sr{sub 2}DyRuO{sub 6}, and the study of the density of states showed that Dy{sup 3} {sup +} and Ru{sup 5} {sup +} are responsible for the magnetic character of the compound, with the prediction that at T = 0 K it behaves as a half-metallic material. The spin magnetic moment of the cell is close to 16 μ{sub B}, and the integer number of Bohr magneton is a signature of half-metallic character. Evolution of crystal structure at high temperature revealed that Sr{sub 2}DyRuO{sub 6} does not undergo any structural phase transitions, since the Bragg reflections [hkl] do not undergo changes, and the structure is preserved. - Highlights: • General properties of the Sr{sub 2}DyRuO{sub 6} complex perovskite are widely discussed. • Structural description of octahedral distortions from X-ray diffraction analysis is performed. • Morphological and compositional characteristics are related with the physical properties reported. • Antiferromagnetic response is discussed form experimental results. • Theoretical calculations reveal the possible half-metallic character of material.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The role of cellular structure, non-equilibrium eutectic phases and precipitates on quasi-static strengthening mechanisms of as-built AlSi10Mg parts 3D printed via laser powder bed fusion

The quasi-static loading strengthening mechanism in the as-built state of an AlSi10Mg alloy 3D-printed via Laser Powder Bed Fusion (LPBF) was thoroughly identified and quantified using state-of-the-art electron microscopy and synchrotron X-ray diffraction techniques. The yield strength was comprehensively modelled through an in-depth characterization and quantification of the microstructural features as well as their effective volumes for strengthening. In particular, the non-equilibrium eutectic network was characterized with a two-fold structure: cell boundary particles as well as intracellular lamellar/fibrous networks, each consisting of discrete phases exhibiting a thru-thickness compositional gradient, a semi-coherent interface with the matrix and an abundance of crystal defects such as nano-sized sub-grains, microstrains and stacking faults. Further, these altogether made the eutectic phase the most potent contributor to the yield strength accounting for ~30–40% of the estimated value (i.e., cell boundary and eutectic network strengthening combined). Precipitates strengthening was identified as the second most potent mechanism via a shearing process only. Moreover, the presented methodology was able to capture the effect of LPBF processing variables on the individual strengthening contributions, e.g., the effect of a lower laser scanning speed on increasing the cell size as well as the mean precipitate size, which are shown to exhibit opposing impacts on strengthening.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Synthesis of polyaniline/SnO{sub 2} nanocomposite and its improved electrochemical performance

Highlights: • Supercapacitors based on PANI/SnO{sub 2} nanocomposite were reported. • Supercapacitors using this material gave a specific capacitance of 501 F g{sup −1}. • Capacitance retention was 85.8% over 2000 charge–discharge cycles. - Abstract: SnO{sub 2} was prepared by the hydrothermal route. Aniline monomer was polymerized in the suspension of SnO{sub 2} to form inorganic–organic nanocomposite materials, in which SnO{sub 2} particles were embedded within polyaniline (PANI). Morphological and structural characterizations of the prepared samples were carried out using scanning electron microscope; transmission electron microscope; power X-ray diffraction and Fourier transform infrared spectroscopy. Their electrochemical properties were also investigated using cyclic voltammetry, galvanostatic charge–discharge and electrochemical impedance spectroscopy. The as-prepared nanocomposites had excellent properties in the capacitance, and its specific capacitance was up to 501 F g{sup −1} with a specific energy density of 66.8 W h kg{sup −1} at a power density of 960.6 W kg{sup −1}. The device fulfilled the requirement of long durability necessary for an energy storage system, since after 2000 galvanostatic charge–discharge cycles, retention of 85.8% in capacitance was observed. These results indicated that the PANI/SnO{sub 2} had a synergistic effect of the complementary properties of both components.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Identifying point defects and ordering in the high-entropy layered oxide Li 1.5 MO 3-δ (M=Mn, Al, Fe, Co, Ni) for energy storage applications

High-entropy layered oxides (HELOs) represent a very promising class of next-generation battery cathodes, combining the well-studied properties of layered cathode materials such as LiCoO 2 with the chemical tunability and stability of high-entropy materials. HELO materials often form particles with complex defects and domain structures, complicating accurate characterization of structure and cation mixing. Understanding disorder and order in HELO materials is necessary for understanding their performance and utility as cathodes. Here we demonstrate the characterization of the HELO Li 1.5 MO 3-δ (M = Mn, Al, Fe, Co, Ni), wherein X-ray powder diffraction, transmission electron microscopy imaging, and electron diffraction patterns are analyzed to reveal the presence of ordering in the HELO, with imaging and diffraction simulation employed to compare experimental results to atomic modeling. Finally, without rigorous characterization at the atomic scale, important features such as defect ordering can be easily overlooked and therefore remain unconsidered when interpreting experimental results.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Enhancement of effective linear RF surface resistance of superconducting surfaces by microscopic topography

Minimization of Radio-Frequency (RF) dissipation on superconducting surfaces is of interest for many applications. A prominent one is the use of Superconducting RF (SRF) cavities for charged particle acceleration. In addition to our previous investigation which characterized the occurrence of high-field non-linear losses by microscopic surface topography, the topic of increased linear losses as a function of surface topographic character merits consideration. Surfaces with isotropic homogeneous surface topography may be well characterized by power spectral density (PSD) derived from systematic height measurements. PSD characterizations of representative niobium cavity surface treatments have been developed: Electro-Polishing (EP), Nano-Mechanical Polishing (NMP) and Centrifugal Barrel Polishing (CBP) A perturbation model based on PSD statistical analysis is used to calculate additional RF loss on these surfaces when superconducting. The model assesses the penetration depth effects for a superconductor. We thus estimate the RF power dissipation ratio between these rough surfaces and an ideal smooth surface.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗