Search NASA⌕ Search

SEARCH · Search NASA

Results for “Practical Application”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Chemical Vapor Transformation of Lithium Metal: Mechanism and Enhanced Stability

Constructing a stable solid electrolyte interface (SEI) with high productivity and scalability is essential for the practical application of thin Li metal anodes. Here, in this work, we report a chemical vapor transformation (CVT) strategy in which Li metal is exposed to trimethylaluminum (TMA), inducing a rapid and spontaneous surface reaction that forms a robust, multilayered SEI. In situ quartz crystal microbalance (QCM) and quadrupole mass spectrometry (QMS), combined with ex situ X-ray photoelectron spectroscopy (XPS), UV Raman spectroscopy, and density functional theory (DFT) calculations, reveal that TMA removes the native passivation layer, reacts with Li metal, and drives a coupled bulk-surface transformation involving Li–Al interdiffusion. The resulting SEI exhibits a chemically graded structure consisting of an inner Li–Al alloy and an outer amorphous carbon layer formed via demethylation and ligand-exchange pathways. This modified surface exhibits significantly enhanced stability compared to that of bare Li in electrochemical cycling using liquid and solid-state electrolytes. This work unveils a unique surface-mediated bulk transformation mechanism for lithium metal and establishes CVT as a scalable and fundamentally distinct approach for the interfacial engineering of reactive metals.

Li metal↗

Proton Reduction Using a Hydrogenase-Modified Nanoporous Black Silicon Photoelectrode

Metalloenzymes featuring earth-abundant metal-based cores exhibit rates for catalytic processes such as hydrogen evolution comparable to those of noble metals. Realizing these superb catalytic properties in artificial systems is challenging owing to the difficulty of effectively interfacing metalloenzymes with an electrode surface in a manner that supports efficient charge-transfer. Here, we demonstrate that a nanoporous 'black' silicon (b-Si) photocathode provides a unique interface for binding an adsorbed [FeFe]-hydrogenase enzyme ([FeFe]-H2ase). The resulting [FeFe]-H2ase/b-Si photoelectrode displays a 280 mV more positive onset potential for hydrogen generation than bare b-Si without hydrogenase, similar to that observed for a b-Si/Pt photoelectrode at the same light intensity. Additionally, we show that this H2ase/b-Si electrode exhibits a turnover frequency of >/=1300 s-1 and a turnover number above 107 and sustains current densities of at least 1 mA/cm2 based on the actual surface area of the electrode (not the smaller projected geometric area), orders of magnitude greater than that observed for previous enzyme-catalyzed electrodes. While the long-term stability of hydrogenase on the b-Si surface remains too low for practical applications, this work extends the proof-of-concept that biologically derived metalloenzymes can be interfaced with inorganic substrates to support technologically relevant current densities.

36 MATERIALS SCIENCE↗

Spectroscopic Investigation of the Mechanisms Responsible for the Superior Stability of Hybrid Class 1/Class 2 CO 2 Sorbents: A New Class 4 Category

Hybrid Class 1/Class 2 supported amine CO 2 sorbents demonstrate superior performance under practical steam conditions, yet their amine immobilization and stabilization mechanisms are unclear. Uncovering the interactions responsible for the sorbents’ robust features is critical for further improvements and can facilitate practical applications. We employ solid state 29 Si CP-MAS and 2-D FSLG 1 H– 13 C CP HETCOR NMR spectroscopies to probe the overall molecular interactions of aminosilane/silica, polyamine [poly(ethylenimine), PEI]/silica, and hybrid aminosilane/PEI/silica sorbents. A unique, sequential impregnation sorbent preparation method is executed in a diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) setup to decouple amine binding mechanisms at the amine–silica interface from those within bulk amine layers. These mechanisms are correlated with each sorbents’ resistance to accelerated liquid H 2 O and TGA steam treatments (H 2 O stability) and to oxidative degradation (thermal stability). High percentages of CO 2 capture retained (PCR) and organic content retained (OCR) values after H 2 O testing of N-(3-(trimethoxysilyl)propyl)ethylenediamine (TMPED)/PEI and (3-aminopropyl)trimethoxysilane (APTMS)/PEI hybrid sorbents are associated with a synergistic stabilizing effect of the amine species observed during oxidative degradation (thermal gravimetric analysis-differential scanning calorimetry, TGA-DSC). Solid state NMR spectroscopy reveals that the synergistic effect of the TMPED/PEI mixture is manifested by the formation of hydrogen-bonded PEI–NH 2 ···NH 2 –TMPED and PEI–NH 2 ···HO–Si/O–Si–O (TMPED, T 2 ) linkages within the sorbent. DRIFTS further determines that PEI enhances the grafting of TMPED to silica and that PEI is dispersed among a stable network of polymerized TMPED in the bulk, utilizing H-bonded linkages. These findings provide the scientific basis for establishing a Class 4 category for aminosilane/polyamine/silica hybrid sorbents.

01 COAL, LIGNITE, AND PEAT↗

Cofacial Versus Coplanar Arrangement in Centrosymmetric Packing Dimers of Dipolar Small Molecules: Structural Effects on the Crystallization Behaviors and Optoelectronic Characteristics

Two D-π–A-A molecules ( MIDTP and TIDTP ) composed of an electron-rich ditolylamino group (D) and an electron-deficient 5-dicyanovinylenylpyrimidine (A-A) fragment bridged together with indeno[1,2- b ]thiophene (IDT) were synthesized. These molecules provide an opportunity to examine in-depth the impact of side-chain variations (methyl vs p -tolyl) on the crystallization behaviors, solid-state morphology, physical properties, and optoelectronic characteristics relevant for practical applications. X-ray analyses on single-crystal structures indicate that methyl-substituted MIDTP forms “coplanar antiparallel dimers” via C–H···S interactions and organizes into an ordered slip-staircase arrays. In contrast, p -tolyl-bearing TIDTP shows “cofacial centrosymmetric dimers” via π–π interactions and packs into a less-ordered layered structures. The X-ray diffraction analyses upon thermal treatment are consistent with a superior crystallinity of MIDTP , as compared to that of TIDTP . This difference indicates a greater propensity to organization by introduction of the smaller methyl group versus the bulkier p -tolyl group. The increased propensity for order by MIDTP facilitates the crystallization of MIDTP in both solution-processed and vacuum-deposited thin films. MIDTP forms solution-processed single-crystal arrays that deliver OFET hole mobility of 6.56 × 10 –4 cm 2 V –1 s –1 , whereas TIDTP only forms amorhpous films that gave lower hole mobility of 1.34 × 10 –5 cm 2 V –1 s –1 . MIDTP and TIDTP were utilized to serve as donors together with C 70 as acceptor in the fabrication of small-molecule organic solar cells (SMOSCs) with planar heterojunction (PHJ) or planar-mixed heterojunction (PMHJ) device architectures. OPV devices based on higher crystalline MIDTP delivered power conversion efficiencies (PCEs) of 2.5% and 4.3% for PHJ and PMHJ device, respectively, which are higher than those of TIDTP -based cells. Finally, the improved PCEs of MIDTP -based devices are attributed to better hole-transport character.

36 MATERIALS SCIENCE↗

A Fluorinated Ether Electrolyte Enabled High Performance Prelithiated Graphite/Sulfur Batteries

Lithium/sulfur (Li/S) batteries have attracted great attention as a promising energy storage technology, but so far their practical applications are greatly hindered by issues of polysulfide shuttling and unstable lithium/electrolyte interface. To address these issues, a feasible strategy is to construct a rechargeable prelithiated graphite/sulfur batteries. In this study, a fluorinated ether of bis(2,2,2-trifluoroethyl) ether (BTFE) was reported to blend with 1,3-dioxolane (DOL) for making a multifunctional electrolyte of 1.0 M LiTFSI DOL/BTFE (1:1, v/v) to enable high performance prelithiated graphite/S batteries. First, the electrolyte significantly reduces polysulfide solubility to suppress the deleterious polysulfide shuttling and thus improves capacity retention of sulfur cathodes. Second, thanks to the low viscosity and good wettability, the fluorinated electrolyte dramatically enhances the reaction kinetics and sulfur utilization of high-areal-loading sulfur cathodes. More importantly, this electrolyte forms a stable solid-electrolyte interphase (SEI) layer on graphite surface and thus enables remarkable cyclability of graphite anodes. Lastly, by coupling prelithiated graphite anodes with sulfur cathodes with high areal capacity of ~3 mAh cm -2 , we demonstrate prelithiated graphite/sulfur batteries that show high sulfur-specific capacity of ~1000 mAh g -1 and an excellent capacity retention of >65% after 450 cycles at C/10.

25 ENERGY STORAGE↗

Recovering Rare Earth Elements from Aqueous Solution with Porous Amine–Epoxy Networks

Recovering aqueous rare earth elements (REEs) from domestic water sources is one key strategy to diminish the U.S.’s foreign reliance of these precious commodities. Herein, we synthesized an array of porous, amine–epoxy monolith and particle REE recovery sorbents from different polyamine, namely tetraethylenepentamine, and diepoxide (E2), triepoxide (E3), and tetra-epoxide (E4) monomer combinations via a polymer-induced phase separation (PIPS) method. The polyamines provided -NH 2 (primary amine) plus -NH (secondary amine) REE adsorption sites, which were partially reacted with C–O–C (epoxide) groups at different amine/epoxide ratios to precipitate porous materials that exhibited a wide range of apparent porosities and REE recoveries/affinities. Specifically, polymer particles (ground monoliths) were tested for their recovery of La 3+ , Nd 3+ , Eu 3+ , Dy 3+ , and Yb 3+ (Ln 3+ ) species from ppm-level, model REE solutions (pH ≈ 2.4, 5.5, and 6.4) and a ppb-level, simulated acid mine drainage (AMD) solution (pH ≈ 2.6). Screening the sorbents revealed that E3/TEPA-88 (88% theoretical reaction of -NH 2 plus -NH) recovered, overall, the highest percentage of Ln 3+ species of all particles from model 100 ppm- and 500 ppm-concentrated REE solutions. Water swelling (monoliths) and ex situ, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) (ground monoliths/particles) data revealed the high REE uptake by the optimized particles was facilitated by effective distribution of amine and hydroxyl groups within a porous, phase-separated polymer network. In situ DRIFTS results clarified that phase separation, in part, resulted from polymerization of the TEPA-E3 (N-N-diglycidyl-4-glycidyloxyaniline) species in the porogen via C–N bond formation, especially at higher temperatures. Most importantly, the E3/TEPA-88 material cyclically recovered >93% of ppb-level Ln 3+ species from AMD solution in a recovery–strip–recovery scheme, highlighting the efficacy of these materials for practical applications.

36 MATERIALS SCIENCE↗

Robust and Elastic Polymer Membranes with Tunable Properties for Gas Separation

Here, polymer membranes with the capability to process a massive volume of gas are especially attractive for practical applications of gas separation. Although much effort has been devoted to develop novel polymer membranes with increased selectivity, the overall gas-separation performance and lifetime of membrane are still negatively affected by the weak mechanical performance, low plasticization resistance and poor physical aging tolerance. Recently, elastic polymer membranes with tunable mechanical properties have been attracting significant attentions due to their tremendous potential applications. Herein, we report a series of urethanerich PDMS-based polymer networks (U-PDMS-NW) with improved mechanical performance for gas separation. The cross-link density of U-PDMS-NWs is tailored by varying the molecular weight ( M n ) of PDMS. The U-PDMS-NWs show up to 400% elongation and tunable Young’s modulus (1.3–122.2 MPa), ultimate tensile strength (1.1–14.3 MPa), and toughness (0.7–24.9 MJ/m 3 ). All of the U-PDMS-NWs exhibit salient gas-separation performance with excellent thermal resistance and aging tolerance, high gas permeability (>100 Barrer), and tunable gas selectivity (up to α[ P CO 2 / P N 2 ] ≈ 41 and α[ P CO 2 / P CH 4 ] ≈ 16). With well-controlled mechanical properties and gas-separation performance, these U-PDMS-NW can be used as a polymermembrane platform not only for gas separation but also for other applications such as microfluidic channels and stretchable electronic devices.

36 MATERIALS SCIENCE↗

Enabling High-Energy-Density Cathode for Lithium-Sulfur Batteries

High-loading sulfur electrode is critical for high energy Lithium-sulfur (Li-S) batteries used for practical applications. Unfortunately, dense and high-loading sulfur electrodes usually suffer from low sulfur utilization rate and limited cycle life. In this work, effects of electrode porosity on the electrode energy density, cell cycling stability, Li anode interface, and electrolyte/sulfur ratio were systematically investigated using high loading sulfur electrodes. The reduced electrode porosity increases volumetric energy density but also hinders electrode wetting process. To solve this problem, polysulfide (Li2S6) is selected as an electrolyte additive to enhance electrolyte penetration into dense sulfur cathodes. As a result, a high energy density of 1300 Wh L-1 (at electrode level) has been obtained for a dense sulfur cathode with a sulfur loading of 4 mg cm-2 at a compressed thickness of 60 µm. Li-S batteries with dense electrodes and Li2S6 additive also demonstrate promising cycling stability (~80 % capacity retention for 200 cycles). These significant improvements are contributed by synergistic effects of the dense sulfur cathode, improved electrolyte penetration, and suppressed growth of passivation layer on Li metal anode. This study sheds light on rational sulfur cathode structure design as well as control of electrode porosity for balanced energy density and cycling life.

Lu, Dongping↗

Expanding Interlayer Spacing of Hard Carbon by Natural K + Doping to Boost Na-Ion Storage

Heteroatom-doped carbon is an attractive material for anodes in lithium/sodium ion batteries as a replacement for the traditional graphite anodes. However, the complex fabrication process and high-cost force these carbon materials far from the practical applications. Here we report a low-cost, natural potassium-doped carbon material, which is directly carbonized from the coconut endocarp – a kind of the high-potassium contained biomass materials. The obtained carbon structure features an expanded d(002)-spacing (0.4 nm) originating from the super-high potassium content (6654 mg kg-1). Because of the improvement on charge transfer kinetics and electrical properties, the potassium-doped carbon anode exhibits promising electrochemical performance in sodium ion batteries, including high initial reversible capacity (314 mAh g-1) and good cycle stability (289 mAh g-1 after 200 cycles). Additionally, this work opens up a new approach for the design of heteroatom-doped carbon materials from the view of the natural environmental friendly.

Wu, Feng↗

Controlled Synthesis of Sulfur-Rich Polymeric Selenium Sulfides as Promising Electrode Materials for Long-Life, High-Rate Lithium Metal Batteries

High-energy lithium/sulfur (Li/S) batteries still suffer from unsatisfactory cycle life and poor rate capability caused by the polysulfides shuttle and insulating nature of S cathodes. Here, we report our findings in the controlled synthesis of selenium (Se)-containing S-rich co-polymers of various compositions as novel cathode materials through a facile inverse vulcanization of S with selenium disulfide (SeS2) and 1,3- diisopropenylbenzene (DIB) as co-monomers. Nuclear magnetic resonance and X-ray photoelectron spectroscopy results show that divinyl functional groups of DIB were chemically cross-linked with S/SeS2 chain radicals through a ring-opening polymerization. The newly formed bonds of C-S, C-Se, and S-Se in novel S-SeS2-DIB copolymers effectively alleviate the shuttle effects of polysulfides/polyselenides. Furthermore, various electrochemical techniques confirm the positive roles of Secontaining co-polymers in enhancing the electrode reaction kinetics and the formation of stable solid electrolyte interphase layer with low charge-transfer resistance, leading to improved high-rate performances. The as-synthesized co-polymer was then infiltrated into well-interconnected, porous nanocarbon networks (Ketjenblack EC600JD, KB600) to provide effective paths for the fast electron transport. Due to the synergistic combination of chemical and physical confinement of the reaction intermediates during cycling, good reversibility for 500 cycles with a low decay rate of 0.0549% per cycle was achieved at 1000 mA g-1. These encouraging results suggest that the combination of chemical incorporation of SeS2 into S-rich co-polymer and the physical confinement of carbon networks is a promising strategy for advancing Li/S batteries and their viability for practical applications.

Dong, Panpan↗

Electrolyte Effect on the Electrochemical Performance of Mild Aqueous Zinc-Electrolytic Manganese Dioxide Batteries

Recently, mild aqueous rechargeable Zn-MnO 2 batteries have attracted increasing interest for energy storage due to the appealing attributes of low cost of Zn and Mn resource and high safety and environmental benignity. Despite extensive types of MnO 2 have been proposed for cathodes, the different reported performance, complex synthesis methods and lacking a thorough understanding of reactions in MnO 2 cathodes greatly hinder their practical applications for long life energy storage. Here we demonstrate the low cost and commercially available electrolytic manganese dioxide (EMD) as a promising and reversible cathode for mild aqueous rechargeable Zn-MnO 2 batteries through a rational manipulation of redox reactions in EMD cathode. In optimal Zn(TFSI)2-based electrolyte, the EMD cathode exhibits a mixed diffusion controlled conversation relation between EMD and H + and diffusion-free pseudocapacitance-like reactions without phase change. This mechanism enables EMD cathode with excellent cycling stability over 5000 cycles with a capacity retention of 94%. This study provides new opportunity to develop mild aqueous Zn-MnO 2 batteries with low cost and high-performance cathode materials by a rational control of the reaction mechanisms.

25 ENERGY STORAGE↗

Enhanced Electrochemical Performance of Sodium Manganese Ferrocyanide by Na 3 (VOPO 4 ) 2 F Coating for Sodium-Ion Batteries

Sodium manganese ferrocyanide Na x Mn[Fe(CN) 6 ] y is an attractive cathode material for sodium-ion batteries. However, NaxMn[Fe(CN) 6 ] y prepared by simple coprecipitation of Mn 2+ and [Fe(CN) 6 ] 4– usually shows poor cycling performance, which hinders its practical application. In this work, electrochemical performance of a Na 1.6 Mn[Fe(CN) 6 ] 0.9 (PBM) sample prepared by the simple precipitation method was greatly improved by coating with Na 3 (VOPO 4 ) 2 F (NVOPF) via a solution precipitation method. The as-prepared PBM@NVOPF with a coating quantity of 2.0% molar ratio showed enhanced rate capability and superior cyclic stability. The discharge capacities of PBM@NVOPF were 101.5 mA h g –1 (1 C) and 91.4 mA h g –1 (10 C), with a capacity retention of 84.3% after 500 cycles at 1 C, 20 °C. It also exhibited excellent cyclic stability at elevated temperature with an initial capacity of 109.5 mA h g –1 and a capacity retention of 78.8% after 200 cycles at 1 C, 55 °C. In comparison, uncoated PBM showed a discharge capacity of 105.7 mA h g–1 (1 C) and 76.7 mA h g –1 (10 C), with a capacity retention of only 42.0% after 500 cycles at 1 C, 20 °C. The high-temperature performance of bare PBM was very poor, and the capacity retention was only 35.7% after 40 cycles because of serious Mn/Fe dissolution which caused structural deterioration of PBM. NVOPF coating protected the PBM from suffering corrosion in the electrolyte, thus ensured the framework stability of PBM during long-term cycling and contributed to the excellent electrochemical performance.

25 ENERGY STORAGE↗

Distinct Mechanism of Anti-Corrosion and Swelling-Adhesion Modeling of Low-Dimensional Nylon-Fluoropolymer Composite Coatings

Compared to other polymers, composite coatings with fluoropolymers as the matrix have attracted considerable interest due to their mechanical performance, chemical stability, and low surface energy. Herein, we present an anticorrosion mechanism of fluoropolymer composite coatings achieved by dispersing varying amounts of polyamide 12 (PA-12) particles over a poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) matrix. The choice of PVDF-HFP as a coating matrix was driven by its superior processability and mechanical properties over Teflon, while PA-12 afforded swelling capacity, preventing electrolyte permeation, and inhibiting matrix stress crack propagation. The corrosion resistance of the coatings was assessed mainly by potentiodynamic polarization and impedance measurements while being immersed in a NaCl solution. Our electrochemical measurement findings showed that 0.75% w/w PA-12 in the PVDF-HFP matrix significantly enhanced corrosion protection even after 21 days of immersion. Microscopy, dielectric spectroscopy, surface analysis, and mechanical testing (American Society for Testing and Materials standards) corroborated the results. PVDF-HFP coatings containing a minimum percolation threshold of 0.75 wt % PA-12 with 1 mil thickness on mild steel exhibited a remarkable increase in resistance and film adhesion, and a notable corrosion rate decrease. Finite element analysis simulation with a bilinear traction-separation law confirmed the swelling mechanism and adhesion behavior. Finally, this study highlights the potential of nylon particle dispersion in PVDF-HFP matrices as a practical approach to developing advanced anticorrosion coatings with promising practical applications in various industries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Random Copolymerization of Substituted Dioxolanes: Rational Design of High-Performance Polymer Electrolytes

Polymer electrolytes enhance the safety of lithium-ion battery systems, but current state-of-the-art poly­(ethylene oxide)-based polymer electrolytes fail to achieve the electrochemical properties necessary for practical applications. We probed the impact of substituent density on the electrolyte performance by introducing methyl substituents into the backbone of a series of poly­(1,3-dioxolane) (PDXL)-based copolymers. The polymerization of 1,3-dioxolane (DXL) and 4-methyl-1,3-dioxolane (MeDXL) yielded a series of random copolymers that were amorphous above 10% MeDXL incorporation. The copolymers with 10 and 20% MeDXL incorporation exhibited higher efficacies than those of either PDXL or poly­(ethylene oxide) (PEO), highlighting the use of methyl substituents to control the electrochemical properties of polymer electrolytes.

Rugh, Haley J↗

Dithieno[3,2-c:3′,2′‑ h ][2,6]naphthyridine-4,9(5H,10H)-dione-Based Conjugated Polymers for High Stable n‑Type Organic Electrochemical Transistors

Amide/imide-based conjugated polymers have been utilized as n-type OECT materials and have demonstrated promising device performance. However, their performance remains insufficient in terms of both efficiency and stability, which limits their practical applications. The development of conjugated polymers based on amide and imide groups represents a promising approach to address this issue. Here, in this study, we introduced dithieno­[3,2-c:3′,2′-h]­[2,6]­naphthyridine-4,9­(5H,10H)-dione (TVTDA) into the design of the OECT materials for the first time. By copolymerizing it with (E)-2,2′-(ethene-1,2-diyl)­bis­(thiophene-3-carbonitrile), we prepared two polymers, TVTDA-2CNTVT-ST and TVTDA-2CNTVT-BR, which contain linear or branched ethylene glycol side chains, respectively. OECT devices based on these polymers demonstrate n-type charge transport characteristics, achieving promising μC* values of 7.17 and 26.5 F cm –1 V –1 s –1 for TVTDA-2CNTVT-ST and TVTDA-2CNTVT-BR, respectively. The higher electron mobility and μC* of TVTDA-2CNTVT-BR can be attributed to its mixed edge-on and face-on stacking mode, larger crystalline coherence length, and larger domain size in the thin film. To our delight, the OECT devices based on both polymers exhibit good operational stability after operating in an aqueous solution for 2000 s, with current retention rates exceeding 93%, representing the high level among the OECT devices based on amide/imide-conjugated polymers. Our study demonstrates that the TVTDA unit holds great potential for constructing high-performance n-type OECT materials.

36 MATERIALS SCIENCE↗

Deep Understanding of Strong Metal Interface Confinement: A Journey of Pd/FeO x Catalysts

Tuning the atomic interface configuration of noble metals (NMs) and transition-metal oxides is an effective straightforward yet challenging strategy to modulate the activity and stability of heterogeneous catalysts. Herein, Pd supported on mesoporous Fe 2 O 3 with a high specific surface area was rationally designed and chosen to construct the Pd/iron oxide interface. As a versatile model, the physicochemical environments of Pd nanoparticles (NPs) could be precisely controlled by taming the reduction temperature. The experimental and density functional theory calculation results unveiled that the catalyst in the support–metal interface confinement (SMIC) state showed significantly enhanced catalytic activity and sintering resistance for CO oxidation. The constructed Fe sites at the interfaces between FeO x overlayers and Pd NPs not only provided additional coordinative unsaturated ferrous sites for the adsorption and activation of O 2 , thereby facilitating the activation efficiency of O 2 , but also impressively changed the reaction pathway of CO oxidation. As a result, the catalyst followed the Pd/Fe dual-site mechanism instead of the classical Mars–van Krevelen mechanism. For the catalyst in the strong metal–support interaction (SMSI) state, its catalytic activity was seriously suppressed because of the excessive encapsulation of the active Pd sites by FeO x overlayers. Thus, the present study therefore provides detailed insights into the SMIC and SMSI in ferric oxide-supported Pd catalysts, which could guide the preparation of highly efficient supported catalysts for practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanoporous Gold: Understanding the Origin of the Reactivity of a 21st Century Catalyst Made by Pre-Columbian Technology

Nanoporous gold (np-Au), a three-dimensional nanoporous bulk material, is made by selective corrosion of Ag from Ag–Au alloys, a technique already applied by the pre-Columbian cultures of South America. Nanoporous gold is actually a Au-rich Ag–Au alloy which, specifically the Ag 0.03 Au 0.97 composition, combines high reactivity and selectivity for a wide variety of oxidation reactions, from simple CO oxidation to complex oxygen-assisted coupling reactions. Its catalytic reactivity is surprising because np-Au is a nonsupported Au catalyst with relatively large feature sizes on the order of tens of nanometers, thus breaking the generally accepted notion that gold must be in the form of small particles (about a few nanometers) to be an active catalyst. The ease of sample preparation in combination with high reactivity, selectivity, and long-term stability suggests that nanoporous gold has the potential to bring Au catalysis closer to practical applications. We provide a critical review of the current understanding of the origin of the high catalytic activity of nanoporous gold in context of morphology and surface composition in this perspective.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Co 2 P-Pt Heterostructure Interfaces for Electrocatalytic Hydrogen Evolution

Pt-based electrocatalysts are effective for the hydrogen evolution reaction (HER); however, their limited ability to facilitate water dissociation and suboptimal hydrogen binding energy (H BE ) in alkaline electrolytes result in slow reaction kinetics, which hinders their cost-efficiency and practical applications. This study reports the synthesis of Co 2 P-Pt heterostructure nanorods using a seed-mediated growth method, producing a high density of Co 2 P-Pt interfacial sites. Density functional theory (DFT) calculations indicate that electronic interactions at these interfaces optimize H BE on Pt, while the interfacial sites promote water dissociation. The Co 2 P-Pt nanorods demonstrate an overpotential of 14 mV at 10 mA cm −2 for the HER, highlighting the potential of precisely engineered metal-metal phosphide interfaces for enhancing electrocatalytic efficiency.

36 MATERIALS SCIENCE↗