Search NASA⌕ Search

SEARCH · Search NASA

Results for “Process Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Global Carbon Budget 2017

Here an accurate assessment of anthropogenic carbon dioxide (CO 2 ) emissions and their redistribution among the atmosphere, ocean, and terrestrial biosphere – the global carbon budget – is important to better understand the global carbon cycle, support the development of climate policies, and project future climate change. Here we describe data sets and methodology to quantify the five major components of the global carbon budget and their uncertainties. CO 2 emissions from fossil fuels and industry ( E FF ) are based on energy statistics and cement production data, respectively, while emissions from land-use change ( E LUC ), mainly deforestation, are based on land-cover change data and bookkeeping models. The global atmospheric CO 2 concentration is measured directly and its rate of growth ( G ATM ) is computed from the annual changes in concentration. The ocean CO 2 sink ( S OCEAN ) and terrestrial CO 2 sink ( S LAND ) are estimated with global process models constrained by observations. The resulting carbon budget imbalance ( B IM ), the difference between the estimated total emissions and the estimated changes in the atmosphere, ocean, and terrestrial biosphere, is a measure of imperfect data and understanding of the contemporary carbon cycle. All uncertainties are reported as ±1 σ . For the last decade available (2007–2016), E FF was 9.4 ± 0.5 GtC yr –1 , E LUC 1.3 ± 0.7 GtC yr –1 , G ATM 4.7 ± 0.1 GtC yr –1 , S OCEAN 2.4 ± 0.5 GtC yr –1 , and S LAND 3.0 ± 0.8 GtC yr –1 , with a budget imbalance B IM of 0.6 GtC yr –1 indicating overestimated emissions and/or underestimated sinks. For year 2016 alone, the growth in E FF was approximately zero and emissions remained at 9.9 ±\ 0.5 GtC yr –1 . Also for 2016, E LUC was 1.3 ± .7 GtC yr –1 , G ATM was 6.1 ± 0.2 GtC yr –1 , S OCEAN was 2.6 ± 0.5 GtC yr –1 , and S LAND was 2.7 ± 1.0 GtC yr –1 , with a small B IM of –0.3 GtC. G ATM continued to be higher in 2016 compared to the past decade (2007–2016), reflecting in part the high fossil emissions and the small S LAND consistent with El Niño conditions. The global atmospheric CO 2 concentration reached 402.8 ± 0.1 ppm averaged over 2016. For 2017, preliminary data for the first 6–9 months indicate a renewed growth in E FF of +2.0 % (range of 0.8 to 3.0 %) based on national emissions projections for China, USA, and India, and projections of gross domestic product (GDP) corrected for recent changes in the carbon intensity of the economy for the rest of the world. This living data update documents changes in the methods and data sets used in this new global carbon budget compared with previous publications of this data set.

54 ENVIRONMENTAL SCIENCES↗

Engine System Model Development for Nuclear Thermal Propulsion

In order to design, analyze, and evaluate conceptual Nuclear Thermal Propulsion (NTP) engine systems, an improved NTP design and analysis tool has been developed. The NTP tool utilizes the Rocket Engine Transient Simulation (ROCETS) system tool and many of the routines from the Enabler reactor model found in Nuclear Engine System Simulation (NESS). Improved non-nuclear component models and an external shield model were added to the tool. With the addition of a nearly complete system reliability model, the tool will provide performance, sizing, and reliability data for NERVA-Derived NTP engine systems. A new detailed reactor model is also being developed and will replace Enabler. The new model will allow more flexibility in reactor geometry and include detailed thermal hydraulics and neutronics models. A description of the reactor, component, and reliability models is provided. Another key feature of the modeling process is the use of comprehensive spreadsheets for each engine case. The spreadsheets include individual worksheets for each subsystem with data, plots, and scaled figures, making the output very useful to each engineering discipline. Sample performance and sizing results with the Enabler reactor model are provided including sensitivities. Before selecting an engine design, all figures of merit must be considered including the overall impacts on the vehicle and mission. Evaluations based on key figures of merit of these results and results with the new reactor model will be performed. The impacts of clustering and external shielding will also be addressed. Over time, the reactor model will be upgraded to design and analyze other NTP concepts with CERMET and carbide fuel cores.

Nelson, Karl W.↗

Imulation of polymer forming processes - addressing industrial needs

The objective of this paper is to present the development of simulation and design optimization capabilities, for polymer forming processes, in the context of addressing industrial needs. Accomplishments generated from close to twenty years of research in this field, at the National Research Council (NRC), are presented. Polymer forming processes such as extrusion blow moulding, stretch blow moulding and thermoforming have been the focus of the work, yet the research is extendable to similar polymer forming operations such as micro-blow moulding, sheet blow moulding and composites stamping. The research considers material models, process sequence integration and design optimization, derivative processes and 3D finite elements with multi-body contact.

36 MATERIALS SCIENCE↗

Timescales of mafic magmatic fractionation documented by paleosecular variation in basaltic drill core, Snake River Plain volcanic province, Idaho, USA

Abstract The timescales over which fractional crystallization and recharge work in mafic volcano-plutonic provinces is subject to great uncertainty. Currently modeled processes are subject to the scale of measurement: monogenetic basaltic fields accumulate over hundreds of thousands of years, consistent with U-Th-Ra isotopic variations that imply 50% crystallization of basic magmas on timescales of 100,000 years or more, whereas crystal diffusion modeling implies phenocryst residence times of ~1–1000 years. Monogenetic basalts of the Snake River Plain in southern Idaho, USA, are up to 2 km thick and postdate passage over the Yellowstone–Snake River Plain hotspot. Detailed lithologic and geophysical logging of core from deep drill holes, along with chemical stratigraphy and high-resolution paleomagnetic inclination measurements, document individual eruptive units, compound lava flows, and basaltic flow groups that accumulated over 1–6 m.y. Hiatuses are commonly marked by loess or fluvial interbeds that vary from ~0.1 m thick to 20 m thick. Radiometric (40Ar-39Ar, detrital zircon U-Pb) and paleomagnetic timescale ages show that the deepest hole (Kimama drill hole, 1912 m total depth) accumulated over ~6 m.y. Cycles of fractional crystallization and recharge are recognized in the chemical stratigraphy as up-section shifts in major and trace elements; these fractionation cycles commonly represent 40%–50% fractionation. Individual fractionation cycles may comprise 20–40 eruptive units (8–17 lava flows) with little to no change in paleomagnetic inclination (0°–1°), whereas adjacent cycles may differ by several degrees from one another or reflect changes in polarity. Rates of paleosecular variation in Holocene lavas and sediments dated using 14C document significant shifts in magnetic inclination over short timescales, ranging from ~0.05° to 2°/decade, with an average of ~0.5°/decade and a minimum rate of 0.05°/decade. This implies that fractionation cycles with ≤1° variation in magnetic inclination formed on timescales of a few decades up to a few centuries (20–200 years). Thus, the lavas collectively represent only a few thousand years of eruptive activity, with major flow groups separated in time by tens to hundreds of thousands of years. We suggest that the rates defined by paleosecular variation capture the timescales of magmatic chamber evolution (fractionation/recharge) in the seismically imaged mid-crustal sill complex; in contrast, we suggest that crystal diffusion modeling captures the residence times in shallow subvolcanic magmatic chambers that underlie individual monogenetic volcanoes.

Geology↗

Parallel Implicit Hydrodynamics for High Explosive Burn Calculations

High explosives in hostile environments will require calculational capabilities that model processes, which evolve on timescales from minutes to nanoseconds. Eventually the HE will begin to move metal. To handle this temporal evolution an implicit hydrodynamics coupled to the chemical release of the HE energy is required. In addition, the use of chemical kinetics to model the transition from, the initially, slow heating of a confined high explosive through to deflagration and on to detonation requires many computational zones to model high explosive engineering systems. This requirement means that a fully parallel implicit hydrodynamics is essential. In this paper we present the calculation of a nonlinear matrix equation for the advanced particle pressure that has been made parallel and implemented in our AMR code, BABBO. This new parallel implicit hydrodynamics has been applied to a cookoff problem, as well as, one and two dimensional shock problems. Results are presented and discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Process Mining in Healthcare - A Case Study for the Corporate Data Warehouse of the Veterans Affairs Office

Researchers at Oak Ridge National Laboratory are working with the Veteran’s Affairs Administration Office (VA) on a series of studies having the objective of detecting harmful anomalies (i.e., hazards) in VA health information technology systems using its Corporate Data Warehouse (CDW). This progress report describes an ORNL study focused on applying a process mining methodology to that CDW database. In the approach presented herein, process mining methodology is combined with additional software tools, metrics, and filters to permit a quick examination of large volumes of data to address specific research questions. In this work, a case study is presented in which the performance of the combined ORNL approach is evaluated by applying it to the CDW database. We performed an evidence-based study to effectively identify process models and to define metrics of frequency and performance for four health care domains: Consults, Radiology, Laboratory, and Outpatient Medication (RxOut) orders. Additionally, we classified the termination classes of the different cases by mapping to the OASIS Human Task Specification standard. We demonstrated, via process mining, that extracted raw data can aid the understanding of the flow of information in different clinical order processes. We showed that using the stepby- step approach described herein to discover processes in raw electronic health record data can be extremely effective in revealing irregular state transitions in the data and understanding clinical order information flows that are not apparent in analyzing the CDW as it is, without feature extraction.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

On the relationships between the Michaelis–Menten kinetics, reverse Michaelis–Menten kinetics, equilibrium chemistry approximation kinetics, and quadratic kinetics

The Michaelis–Menten kinetics and the reverse Michaelis–Menten kinetics are two popular mathematical formulations used in many land biogeochemical models to describe how microbes and plants would respond to changes in substrate abundance. However, the criteria of when to use either of the two are often ambiguous. Here I show that these two kinetics are special approximations to the equilibrium chemistry approximation (ECA) kinetics, which is the first-order approximation to the quadratic kinetics that solves the equation of an enzyme–substrate complex exactly for a single-enzyme and single-substrate biogeochemical reaction with the law of mass action and the assumption of a quasi-steady state for the enzyme–substrate complex and that the product genesis from enzyme–substrate complex is much slower than the equilibration between enzyme–substrate complexes, substrates, and enzymes. In particular, I show that the derivation of the Michaelis–Menten kinetics does not consider the mass balance constraint of the substrate, and the reverse Michaelis–Menten kinetics does not consider the mass balance constraint of the enzyme, whereas both of these constraints are taken into account in deriving the equilibrium chemistry approximation kinetics. By benchmarking against predictions from the quadratic kinetics for a wide range of substrate and enzyme concentrations, the Michaelis–Menten kinetics was found to persistently underpredict the normalized sensitivity ∂ ln v / ∂ ln k 2 + of the reaction velocity v with respect to the maximum product genesis rate k 2 + , persistently overpredict the normalized sensitivity ∂ ln v / ∂ ln k 1 + of v with respect to the intrinsic substrate affinity k 1 + , persistently overpredict the normalized sensitivity ∂ ln v / ∂ ln [ E ] T of v with respect the total enzyme concentration [ E ] T , and persistently underpredict the normalized sensitivity ∂ ln v / ∂ ln [ S ] T of v with respect to the total substrate concentration [ S ] T . Meanwhile, the reverse Michaelis–Menten kinetics persistently underpredicts ∂ ln v / ∂ ln k 2 + and ∂ ln v / ∂ ln [ E ] T , and persistently overpredicts ∂ ln v / ∂ ln k 1 + and ∂ ln v / ∂ ln [ S ] T . In contrast, the equilibrium chemistry approximation kinetics always gives consistent predictions of ∂ ln v / ∂ ln k 2 + , ∂ ln v / ∂ ln k 1 + , ∂ ln v / ∂ ln [ E ] T , and ∂ ln v / ∂ ln [ S ] T , indicating that ECA-based models will be more calibratable if the modeled processes do obey the law of mass action. Since the equilibrium chemistry approximation kinetics includes advantages from both the Michaelis–Menten kinetics and the reverse Michaelis–Menten kinetics and it is applicable for almost the whole range of substrate and enzyme abundances, land biogeochemical modelers therefore no longer need to choose when to use the Michaelis–Menten kinetics or the reverse Michaelis–Menten kinetics. I expect that removing this choice ambiguity will make it easier to formulate more robust and consistent land biogeochemical models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of design and control of remote manipulators. Modeling manipulator arms with distributed flexibility for design and control

The interactions of control system and distributed flexible structural dynamics is explored for mechanical arms. A modeling process using 4 x 4 transfer matrices is described which permits the closed loop response of many current arm configurations to be evaluated. Root locus, frequency response, modal shapes, and time impulse response have all been obtained from the digital computer implementation of this model, which is oriented to arm design and allows for easy variation of the arm configuration through data cards. The model corresponds with experimentally observed natural frequencies with an average error of less than 5% in the first three flexible modes in the seven cases considered. The model was used to explore the limits imposed by structural flexibility on a nondimensionalized two link arm with one and two joints for planar motion.

Book, W. J.↗

Geomorphic and Aqueous Chemistry of a Portion of the Upper Rio Tinto System, Spain

Observations from the two Mars rovers, Spirit and Opportunity, combined with discoveries of extensive hydrated sulfate deposits from OMEGA and CRISM show that aqueous deposition and alteration involving acidic systems and sulfate deposition has been a key contributor to the martian geologic record. Rio Tinto, Spain, provides a process model for formation of sulfates on Mars by evaporation of acidic waters within shallow fluvial pools, particularly during dry seasons. We present results from a detailed investigation of an upper portion of the Rio Tinto, focusing on geomorphology, clastic sediment transport, and acidic aqueous processes. We also lay out lessons-learned for under-standing sulfate formation and alteration on Mars.

Osburn, M. R.↗

Using EO-1 Hyperion to Simulate HyspIRI Products for a Coniferous Forest: The Fraction of PAR Absorbed by Chlorophyll (fAPAR(sub chl)) and Leaf Water Content(LWC)

This paper presents development of prototype products for terrestrial ecosystems in preparation for the future imaging spectrometer planned for the Hyperspectral Infrared Imager (HyspIRI) mission. We present a successful demonstration example in a coniferous forest of two product prototypes: fraction of photosynthetically active radiation (PAR) absorbed by chlorophyll of a canopy (fAPARchl) and leaf water content (LWC), for future HyspIRI implementation at 60-m spatial resolution. For this, we used existing 30-m resolution imaging spectrometer data available from the Earth Observing One (EO-1) Hyperion satellite to simulate and prototype the level one radiometrically corrected radiance (L1R) images expected from the HyspIRI visible through shortwave infrared spectrometer. The HyspIRIlike images were atmospherically corrected to obtain surface reflectance and spectrally resampled to produce 60-m reflectance images for wavelength regions that were comparable to all seven of the MODerate resolution Imaging Spectroradiometer (MODIS) land bands. Thus, we developed MODIS-like surface reflectance in seven spectral bands at the HyspIRI-like spatial scale, which was utilized to derive fAPARchl and LWC with a coupled canopy-leaf radiative transfer model (PROSAIL2) for the coniferous forest. With this paper, we provide additional evidence that the fAPARchl product is more realistic in describing the physiologically active canopy than the traditional fAPAR parameter for the whole canopy (fAPARcanopy), and thus, it should replace it in ecosystem process models to reduce uncertainties in terrestrial carbon cycle and ecosystem studies.

Earth Observing One↗

New Developments in MadGraph/MadEvent

We here present some recent developments of MadGraph/MadEvent since the latest published version, 4.0. These developments include: Jet matching with Pythia parton showers for both Standard Model and Beyond the Standard Model processes, decay chain functionality, decay width calculation and decay simulation, process generation for the Grid, a package for calculation of quarkonium amplitudes, calculation of Matrix Element weights for experimental events, automatic dipole subtraction for next-to-leading order calculations, and an interface to FeynRules, a package for automatic calculation of Feynman rules and model files from the Lagrangian of any New Physics model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Leverage Score Sampling for Parametric PDEs (Final Technical Report)

This final technical report summarizes the accomplishments of work performed under DOE Office of Science Award DE-SC0022266, which is titled “Leverage Score Sampling for Parametric PDEs”. The goal of the project was to extend methods from Randomized Numerical Linear Algebra (RandNLA) to tackle central computational challenges in model order reduction and uncertainty quantification (UQ) for parametric partial differential equations (PDEs). In particular, we sought to use importance sampling methods originally developed for RandNLA to develop sample efficient active learning algorithms for approximating high-dimensional scalar functions, e.g. by polynomials, Gaussian process models, and simple neural networks. Such methods can be immediately applied to developing surrogate models or to approximating quantity of interest (QoI) surfaces. In the context of PDEs, each sample used for learning equates to the solution of the differential equation for a particular set of parameters, so sample efficiency translates to improved computational efficiency for a variety of downstream tasks.

97 MATHEMATICS AND COMPUTING↗

A general framework for the assessment of solar fuel technologies

The conversion of carbon dioxide and water into fuels in a solar refinery presents a potential solution for reducing greenhouse gas emissions, while providing a sustainable source of fuels and chemicals. Towards realizing such a solar refinery, there are many technological advances that must be met in terms of capturing and sourcing the feedstocks (namely CO2, H2O, and solar energy) and in catalytically converting CO2 and H2O. In the first part of this paper, we review the state-of-the-art in solar energy collection and conversion to solar utilities (heat, electricity, and as a photon source for photo-chemical reactions), CO2 capture and separation technology, and non-biological methods for converting CO2 and H2O to fuels. The two principal methods for CO2 conversion include (1) catalytic conversion using solar-derived hydrogen and (2) direct reduction of CO2 using H2O and solar energy. Both hydrogen production and direct CO2 reduction can be performed electro-catalytically, photo-electrochemically, photo-catalytically, and thermochemically. All four of these methods are discussed. In the second part of this paper, we utilize process modeling to assess the energy efficiency and economic feasibility of a generic solar refinery. The analysis demonstrates that the realization of a solar refinery is contingent upon significant technological improvements in all areas described above (solar energy capture and conversion, CO2 capture, and catalytic conversion processes).

Herron, JA↗

Framework For Optimization Of Resources And Economics Ecosystem

The Framework for Optimization of ResourCes and Economics is a collection of software tools, models, and datasets acquired and developed under the Integrated Energy Systems (IES) program to enable analysis of technical and economic viability of myriad IES configurations. FORCE is the consolidating interface and data repository for all the IES toolsets ranging from macro technoeconomic analysis to transient process modeling and experimental validation for integrated energy systems.

Frick, KonorL↗

Approach and Model Used to Represent a Timeline Analysis for Security Design Enhancements

Next-generation reactors will be able to use risk to inform and performance base the licensing of many aspects of the reactor, facility, and site design, including attributes of physical security. There are several factors related to security, including site topography, reactor design, and physical protection system components, to consider when designing the physical protection system into the overall facility design and plan of operation. With the versatility of advanced reactors, especially micro reactors, methods are needed to simplify and quickly evaluate potential timelines for designing a site configuration. This report describes an approach to generate qualitative and quantitative insights using a risk-informed simulation. The modeling process is described in detail, focusing on three aspects: (1) the facility mission time (the time required to control the plant until safe), (2) the attacker timeline (the time to potential sabotage), and (3) the response timeline (the time to counter the facility attack). The modeling capabilities also are extended to include facility physical phenomena such as thermal-hydraulics and heat transfer to capture realistic representation of dynamic changes to a facility. While the plant models and examples are hypothetical and do not represent a real facility, these modeling approaches could be used for future security-by-design engineering in advanced reactors. The outputs and insights from the modeling approach may be used to modify and optimize the security posture of a facility by efficiently making modifications to the model and seeing the overall impact from the modification. Lastly, use of the approach described in this report can also provide the technical basis for a physical protection program, describing how the facility and security strategy will cope with off-normal events.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Effect of Mixed Working Fluid Composition on Binary Cycle Condenser Heat Transfer Coefficients

Effect of Mixed Working Fluid Composition on Binary Cycle Condenser Heat Transfer Coefficients Dan Wendt, Greg Mines Idaho National Laboratory The use of mixed working fluids in binary power plants can provide significant increases in plant performance, provided the heat exchangers are designed to take advantage of these fluids non-isothermal phase changes. In the 1980's testing was conducted at DOE's Heat Cycle Research Facility (HCRF) where mixtures of different compositions were vaporized at supercritical pressures and then condensed. This testing had focused on using the data collected to verify that Heat Transfer Research Incorporated (HTRI) codes were suitable for the design of heat exchangers that could be used with mixtures. The HCRF data includes mixture compositions varying from 0% to 40% isopentane and condenser tube orientations of 15{sup o}, 60{sup o}, and 90{sup o} from horizontal. Testing was performed over a range of working fluid and cooling fluid conditions. Though the condenser used in this testing was water cooled, the working fluid condensation occurred on the tube-side of the heat exchanger. This tube-side condensation is analogous to that in an air-cooled condenser. Tube-side condensing heat transfer coefficient information gleaned from the HCRF testing is used in this study to assess the suitability of air-cooled condenser designs for use with mixtures. Results of an air-cooled binary plant process model performed with Aspen Plus indicate that that the optimal mixture composition (producing the maximum net power for the scenario considered) is within the range of compositions for which data exist. The HCRF data is used to assess the impact of composition, tube orientation, and process parameters on the condensing heat transfer coefficients. The sensitivity of the condensing coefficients to these factors is evaluated and the suitability of air-cooled condenser designs with mixtures is assessed. This paper summarizes the evaluation of the HCRF data and discusses the next steps in the project evaluation of air-cooled condenser designs that can take advantage of the performance gains possible with these fluids.

15 GEOTHERMAL ENERGY↗

FORCE Development Status Update: Vertical Integration and Benchmarking of System Dynamics

Recent efforts to establish effective models for grid energy analysis, especially given the increase in variable renewable energy (VRE) sources and the economic challenges faced by traditional nuclear energy, have generated new technological considerations. One effort to improve the economic viability of nuclear power involves investigating integrated energy systems (IES) which include secondary energy systems that introduce flexibility and secondary market possibilities to existing and perceived future nuclear energy generation technologies. To analyze the technical and economic potential of IES, the Framework for Optimization of Resources and Economics (FORCE) tool suite was developed through a collaboration among national laboratories. Within the FORCE tool suite, the Holistic Energy Resource Optimization Network (HERON) provides algorithms for analyzing the long-term viability of potential IES technologies, while HYBRID provides algorithms and models to achieve high-resolution analysis of coupling physics over a short time period. Continued maturing of the FORCE tool suite requires further interconnections between the various tools in the suite in order to ensure consistent analysis. Analyses performed by applying HYBRID to transient process modeling should be easily harvestable as inputs to HERON analyses. The first item in this status update is a demonstration of an automated data pipeline for loading data from HYBRID into HERON analyses. Application of HYBRID results to HERON, as part of using the FORCE tool suite, relies on robust modeling assumptions for the various models included in HYBRID. The second result of this status update is the benchmarking and validation of cost and operational data, with a particular focus on natural gas energy generators. These generators are benchmarked with a focus on contrasting them with proposed thermal energy storage (TES) technologies.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Climate and Environmental Sciences Division, North Slope of Alaska Priorities Workshop, September 10–12, 2014

The U.S. Department of Energy (DOE) Climate and Environmental Sciences Division (CESD) within the Office of Biological and Environmental Research (BER), is hosting a series of workshops to solicit community feedback on how key scientific needs, gaps, and priorities in process model understanding and climate model prediction could be addressed through strategic deployment and operation of instruments and routine high resolution modeling. In particular, the use of the Atmospheric Radiation Measurement (ARM) Climate Research Facility—a DOE Office of Science user facility— is being reconfigured to better support the integration of observations and high-resolution modeling and to address these types of emerging science questions. As part of ARM’s reconfiguration, instruments are being concentrated to produce denser observational capabilities at fewer sites. In September 2014, the North Slope of Alaska (NSA) Priorities Workshop was held to obtain scientific input on priorities for observational and scientific research activities related to atmospheric processes in the North Slope region and to identify gaps or needs that limit the ability of the research community to address these scientific priorities. Topics of discussion included capabilities at the existing ARM NSA facilities in Barrow and Oliktok Point, additional observations that may supplement and/or link these facilities (e.g., aircraft, unmanned aerial systems, tethered balloons, scanning radar systems, surface stations), and modeling activities.

54 ENVIRONMENTAL SCIENCES↗