Search NASA⌕ Search

SEARCH · Search NASA

Results for “REDOX PROCESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

The Role of Pulse Radiolysis in Advanced Nuclear Fuel Cycles

The effects of ionizing radiation are ubiquitous throughout all aspects of a nuclear fuel cycle. The complexity and intensity of these effects are greatest during reactor operations and in the management of used nuclear fuel and waste. Radiation-induced processes typically promote the chemical transformation of molecules and materials with the formation of potentially detrimental degradation products and corresponding changes in physical and chemical properties, which ultimately impact the effectiveness and longevity of nuclear technologies. Consequently, a molecular-level understanding of radiation effects over multiple time, distance, and material domains is essential for the innovation and deployment of next generation nuclear technologies. Attaining this knowledge necessitates a firm grasp of radiation-induced reaction kinetics, for which pulsed electron radiolysis is the methodology of choice. Presented here are several recent studies from our group that demonstrate the critical role of pulsed electron radiolysis techniques in the advancement of our understanding of radiation-induced chemistry under advanced nuclear fuel cycle conditions. Research topics include late actinide redox chemistry, radiation robustness of used nuclear fuel reprocessing complexants, and the behavior of metal cations in high temperature molten salt media.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Novel Chalcopyrites for Advanced Photoelectrochemical Water Splitting

With the support of DoE’s EERE office, our team has established a unique tool-chest of capabilities, including theoretical modeling (Lawrence Livermore National Laboratory: LLNL), state-of-the-art synthesis (Hawaii Natural Energy Institute: HNEI, Stanford, and the National Renewable Energy Laboratory: NREL) and advanced materials and interfaces characterization (University of Nevada, Las Vegas: UNLV, and Lawrence Berkeley National Laboratory: LBNL), to accelerate the development of high efficiency and durable chalcopyrite materials for advanced photoelectrochemical (PEC) water splitting. Using this synergistic approach, we have successfully created new wide bandgap chalcopyrite photocathodes generating over 10 mA/cm 2 , developed innovative strategies to protect them from corrosion, and engineered novel integration methods to circumvent thin film materials mechanical, chemical and thermal incompatibility. In Task 1 “Modeling and synthesis of chalcopyrite photocathodes”, we expanded our library of wide bandgap chalcopyrites for PEC water splitting. With support from LLNL’s “Computational Materials Diagnostics and Optimization of PEC Devices”, LBNL’s “photophysical” and NREL’s “I-III-VI Compound Semiconductors for Water-Splitting” nodes, we investigated two new chalcopyrite candidates for PEC water splitting: Cu(In,Al)Se 2 and Cu(In,B)Se 2 . We also further developed ordered vacancy compounds, such as CuGa 3 Se 5 , with unprecedented durability during PEC waters splitting in acidic solutions. In Task 2 “Interfaces engineering for enhanced efficiency and durability”, we addressed both the non-ideal band-edge positions of chalcopyrites with respect to water redox potentials, as well as their chemical instability under PEC water splitting, with a buried-junctions approach. With help from NREL’s “High-Throughput Experimental Thin Film Combinatorial Capabilities” and “Corrosion Analysis of Materials” nodes, we engineered environmentally friendly n-type buffers, including Mn x Zn 1-x O, to adjust the chalcopyrite band-edge positions and achieved photovoltages as high as 925 mV. Also, we integrated non-precious catalytic-protecting layers, such as WO 3 , to enhance the water splitting long-term stability of chalcopyrite absorbers. Finally, in Task 3 “Hybrid photoelectrode device integration”, we proposed an innovative method to bond wide bandgap photocathodes onto narrow bandgap PV drivers at room temperature using conductive polymers. Our semi-monolithic approach addressed fundamental processing incompatibility issues, as both the photocathode and the PV driver are processed separately. Proof-of-concept whole-chalcopyrite tandems were obtained by consecutive exfoliation and transfer of fully integrated 1.85 eV CuGa 3 Se 5 and 1.13 eV CuInGaSe 2 stacks from their Mo/SLG substrates onto a new single FTO host substrate.

08 HYDROGEN↗
NASA NTRS1999

The Mars Environmental Compatibility Assessment (MECA) Wet Chemistry Experiment on the Mars 2001 Lander

The Mars Environmental Compatibility Assessment (MECA) is an instrument suite that will fly on the Mars Surveyor 2001 Lander Spacecraft. MECA is sponsored by the Human Exploration and Development of Space (HEDS) program and will evaluate potential hazards that the dust and soil of Mars might present to astronauts and their equipment on a future human mission to Mars. Four elements constitute the integrated MECA payload: a microscopy station, patch plates, an electrometer, and the wet chemistry laboratory (WCL). The WCL consists of four identical cells, each of which will evaluate a sample of Martian soil in water to determine conductivity, pH, redox potential, dissolved C02 and 02 levels, and concentrations of many soluble ions including sodium, potassium, magnesium, calcium and the halides. In addition, cyclic voltammetry will be used to evaluate reversible and irreversible oxidants present in the water/soil solution. Anodic stripping voltammetry will be used to measure concentrations of trace metals including lead, copper, and cadmium at ppb levels. Voltammetry is a general electrochemical technique that involves controlling the potential of an electrode while simultaneously measuring the current flowing at that electrode. The WCL experiments will provide information on the corrosivity and reactivity of the Martian soil, as well as on soluble components of the soil which might be toxic to human explorers. They will also guide HEDS scientists in the development of high fidelity Martian soil simulants. In the process of acquiring information relevant to HEDS, the WCL will assess the chemical composition and properties of the salts present in the Martian soil.

Grannan, S. M.↗
DOE OSTI2022

Probing Distinctive Redox Mechanism in Ni-Rich Cathode Via Real-Time Quick X-Ray Absorption Spectroscopy

X-ray radiation damage on the measuring system has been a critical issue regularly for a long-time exposure to X-ray beam during the in operando characterizations, which is particularly severe when the applied X-ray energy is near the absorption edges (M, L, K, etc.) of the interest element. Here, to minimize the negative effects raised by beam radiation, we employ quick X-ray absorption spectroscopy (QXAS) to study the electrochemical reaction mechanism of a Ni-rich layered structure cathode for lithium-ion batteries. With the advanced QXAS technique, the electronic structure and local coordination environment of the transition metals (TMs) are monitored in-operando with limited radiation damage. Compared to the conventional step-mode X-ray absorption spectroscopy, the QXAS can provide more reliable oxidation state change and more detailed local structure evolutions surrounding TMs (Ni and Co) in Ni-rich layered oxides. By leveraging these advantages of QXAS, we demonstrated that the Ni dominates the electrochemical process with the Co being almost electrochemically inactive. Reversible Ni ions movement between TMs sites and Li sites is also revealed by the time-resolved QXAS technique.

25 ENERGY STORAGE↗
DOE OSTI2017

Atomic Resolution Structural and Chemical Imaging Revealing the Sequential Migration of Ni, Co, and Mn upon the Battery Cycling of Layered Cathode

Layered lithium transition metal oxides (LTMO) are promising candidate cathode materials for next generation high energy density lithium ion battery. The challenge for using this category of cathode is the capacity and voltage fading, which is believed to be associated with the layered structure disordering, a process that is initiated from the surface or solid-electrolyte interface and facilitated by transition metal (TM) reduction and oxygen vacancy formation. However, the atomic level dynamic mechanism of such a layered structure disordering is still not fully clear. In this work, utilizing atomic resolution electron energy loss spectroscopy (EELS), we map, for the first time at atomic scale, the spatial evolution of Ni, Co and Mn in a cycled LiNi1/3M1/3Co1/3O2 layered cathode. In combination with atomic level structural imaging, we discovered the direct correlation of TM ions migration behavior with lattice disordering, featuring the residing of TM ions in the tetrahedral site and a sequential migration of Ni, Co, and Mn upon the increased lattice disordering of the layered structure. This work highlights that Ni ions, though acting as the dominant redox species in many LTMO, are labile to migrate to cause lattice disordering upon battery cycling; while the Mn ions are more stable as compared with Ni and Co and can act as pillar to stabilize layered structure. Direct visualization of the behavior of TM ions during the battery cycling provides insight for designing of cathode with structural stability and correspondingly a superior performance.

annular bright field image↗
DOE OSTI2019

Medium-Chain Fatty Acid Synthesis by “ Candidatus Weimeria bifida” gen. nov., sp. nov., and “ Candidatus Pseudoramibacter fermentans” sp. nov.

ABSTRACT Chain elongation is emerging as a bioprocess to produce valuable medium-chain fatty acids (MCFA; 6 to 8 carbons in length) from organic waste streams by harnessing the metabolism of anaerobic microbiomes. Although our understanding of chain elongation physiology is still evolving, the reverse β-oxidation pathway has been identified as a key metabolic function to elongate the intermediate products of fermentation to MCFA. Here, we describe two uncultured chain-elongating microorganisms that were enriched in an anaerobic microbiome transforming the residues from a lignocellulosic biorefining process. Based on a multi-omic analysis, we describe “ Candidatus Weimeria bifida” gen. nov., sp. nov., and “ Candidatus Pseudoramibacter fermentans” sp. nov., both predicted to produce MCFA but using different substrates. The analysis of a time series metatranscriptomic data set suggests that “ Ca . Weimeria bifida” is an effective xylose utilizer since both the pentose phosphate pathway and the bifid shunt are active. Furthermore, the metatranscriptomic data suggest that energy conservation during MCFA production in this organism is essential and occurs via the creation of an ion motive force using both the RNF complex and an energy-conserving hydrogenase. For “ Ca . Pseudoramibacter fermentans,” predicted to produce MCFA from lactate, the metatranscriptomic analysis reveals the activity of an electron-confurcating lactate dehydrogenase, energy conservation via the RNF complex, H 2 production for redox balance, and glycerol utilization. A thermodynamic analysis also suggests the possibility of glycerol being a substrate for MCFA production by “ Ca . Pseudoramibacter fermentans.” In total, this work reveals unknown characteristics of MCFA production in two novel organisms. IMPORTANCE Chain elongation by medium-chain fatty acid (MCFA)-producing microbiomes offers an opportunity to produce valuable chemicals from organic streams that would otherwise be considered waste. However, the physiology and energetics of chain elongation are only beginning to be studied, and many of these organisms remain uncultured. We analyzed MCFA production by two uncultured organisms that were identified as the main MCFA producers in a microbial community enriched from an anaerobic digester; this characterization, which is based on meta-multi-omic analysis, complements the knowledge that has been acquired from pure-culture studies. The analysis revealed previously unreported features of the metabolism of MCFA-producing organisms.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1993

Critical review of electrical conductivity measurements and charge distribution analysis of magnesium oxide

The electrical conductivity sigma of MgO single crystals shows a sharp increase at 500-800 C, in particular of sigma surface, generally attributed to surface contamination. Charge Distribution Analysis (CDA), a new technique providing information on fundamental properties that was previously unavailable, allows for the determination of surface charges, their sign and associated internal electric field. Data on 99.99% purity, arc-fusion grown MgO crystals show that mobile charge carriers start to appear in the bulk of the MgO crystals between 200 and 400 C when sigma (measured by conventional techniques) is in t he 10(exp -14) to 10(exp -16) /omega/cm range. Above 500 C, as sigma increases to 10(exp -6) to 10(exp -7)/omega/cm, more charges appear giving rise to a strong positive surface charge supported by a strong internal field. This indicates that charges are generated in the bulk and diffuse to the surface by an internally controlled process. On the basis of their positive sign they are identified as holes (defect electrons). Because of the low cation content of these very pure MgO crystals, theses holes cannnot be associated with transition metal impurties. Instead, they are associated with the O(2-) sublattice, e.g. consist of O(-) states or positive holes. This conclusion is supported by magnetic susceptibility data showing the appearance of 1000 +/- 500 ppm paramagnetic species between 200-500 C. The magnetic data are consistent with strongly coupled, diamagnetic O(-) pairs below 200-500 C, chemically equivalent to peroxy anions, O2(2-), and probably associated with cation vacancies in the MgO matrix. The formation of O2(2-) in arc-fusion grown MgO crystals is very unexpected because of the highly reducing growth conditions. Their presence implies an internal redox reaction involving dissolved 'water' by which OH(-) pairs convert to O2(2-) plus H2 molecules. This redox conversion is supported by mass spectroscopic measurements of the H2 release from highly OH(-)-doped, finely divided MgO and by wet-chemical analysis of its oxidant concentration.

Freund, Friedemann↗
DOE OSTI2017

Nitric-glycolic flowsheet evaluation with the slurry-fed melt rate furnace

The Savannah River National Laboratory (SRNL) was tasked to support validation of the Defense Waste Processing Facility (DWPF) melter offgas flammability model for the nitric-glycolic (NG) flowsheet. The work supports Deliverable 4 of the DWPF & Saltstone Facility Engineering Technical Task Request (TTR)1 and is supplemental to the Cold Cap Evaluation Furnace (CEF) testing conducted in 2014.2 The Slurry-fed Melt Rate Furnace (SMRF) was selected for the supplemental testing as it requires significantly less resources than the CEF and could provide a tool for more rapid analysis of melter feeds in the future. The SMRF platform has been used previously to evaluate melt rate behavior of DWPF glasses, but was modified to accommodate analysis of the offgas stream. Additionally, the Melt Rate Furnace (MRF) and Quartz Melt Rate Furnace (QMRF) were utilized for evaluations. MRF data was used exclusively for melt behavior observations and REDuction/OXidation (REDOX) prediction comparisons and will be briefly discussed in conjunction with its support of the SMRF testing. The QMRF was operated similarly to the SMRF for the same TTR task, but will be discussed in a separate future report. The overall objectives of the SMRF testing were to; 1) Evaluate the efficacy of the SMRF as a platform for steady state melter testing with continuous feeding and offgas analysis; and 2) Generate supplemental melter offgas flammability data to support the melter offgas flammability modelling effort for DWPF implementation of the NG flowsheet.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2018

Understanding the Dynamics of Primary Zn-MnO 2 Alkaline Battery Gassing with Operando Visualization and Pressure Cells

The leading cause for safety vent rupture in alkaline batteries is the intrinsic instability of Zn in the highly alkaline reacting environment. Zn and aqueous KOH react in a parasitic process to generate hydrogen gas, which can rupture the seal and vent the hydrogen along with small amounts of electrolyte, and thus, damage consumer devices. Abusive conditions, particularly deep discharge, are known to accelerate this “gassing” phenomena. In order to understand the fundamental drivers and mechanisms for such gassing behavior, the results from multiphysics modeling, ex-situ microscopy and operando measurements of cell potential, pressure and visualization have been combined. Operando measurements were enabled by the development a new research platform that enables a cross-sectional view of a cylindrical Zn-MnO 2 primary alkaline battery throughout its discharge and recovery. A second version of this cell can actively measure the in-cell pressure during the discharge. It is shown that steep concentration gradients emerge during the cell discharge through a redox electrolyte mechanism, leading to the formation of high surface area Zn deposits that experience rapid corrosion when the cell rests to its open circuit voltage. Such corrosion is paired with the release of hydrogen and high cell pressure – eventually leading to cell rupture.

25 ENERGY STORAGE↗
DOE OSTI2018

Understanding the electrochemical lithiation/delithiation process in the anode material for lithium ion batteries NiFeOPO 4 /C using ex-situ X-ray absorption near edge spectroscopy and in-situ synchrotron X-ray

Here, nickel iron (III) oxyphosphate NiFeOPO 4 (NFP) was successfully synthesized using solid-state route and modified with carbon layer using sucrose as carbon source. The electrochemical performances of the composite anode material NiFeOPO 4 /C (NFP/C) vs. Li + /Li 0 were investigated at C/5 current rate and in a wide voltage window 0.01-3.0 V. During the first lithiation at C/5, NFP/C was able to uptake more than six lithium ions into the structure delivering a capacity of 736.63 mAh g -1 . In this study, NFP phosphate was characterized using XRD, SEM, EDS mapping, and Raman spectroscopy. The first cycle was investigated using high energy spectroscopies including: in-situ synchrotron X-Ray Diffraction and ex-situ X-ray Absorption Near Edge Spectroscopy (XANES). In-situ synchrotron XRD revealed that the crystal structure of NFP/C undergoes structural transformations leading to lower degrees of crystallinity during the first lithiation. Ex-situ XANES measurements disclosed that the redox reaction of iron and nickel during the first lithiation and delithiation is reversible.

25 ENERGY STORAGE↗
DOE OSTI2018

Downregulation of mitochondrial alternative oxidase affects chloroplast function, redox status and stress response in a marine diatom

Diatom dominance in contemporary aquatic environments indicates that they have developed unique and effective mechanisms to cope with the rapid and considerable fluctuations that characterize these environments. In view of their evolutionary history from a secondary endosymbiosis, inter-organellar regulation of biochemical activities may be of particular relevance. Diatom mitochondrial alternative oxidase (AOX) is believed to play a significant role in supplying chloroplasts with ATP produced in the mitochondria. Using the model diatom Phaeodactylum tricornutum we generated AOX knockdown lines, and followed sensitivity to stressors, photosynthesis and transcriptome and metabolome profiles of wild-type and knockdown lines. We show here that expression of the AOX gene is upregulated by various stresses including H 2 O 2 , heat, high light illumination, and iron or nitrogen limitation. AOX knockdown results in hypersensitivity to stress. Knockdown lines also show significantly reduced photosynthetic rates and their chloroplasts are more oxidized. Comparisons of transcriptome and metabolome profiles suggest a strong impact of AOX activity on gene expression, which is carried through to the level of the metabolome. Our data provide evidence for the involvement of mitochondrial AOX in processes central to the cell biology of diatoms, revealing that cross-talk between mitochondria and chloroplasts is crucial for maintaining sensitivity to changing environments.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Understanding the Role of Lithium Iodide in Lithium–Oxygen Batteries

Lithium–oxygen (Li–O 2 ) batteries possess a high theoretical energy density, which means they could become a potential alternative to lithium-ion batteries. Nevertheless, the charging process of Li–O 2 batteries requires much higher energy, due to the insulating nature of the discharge product. It has been revealed that the anion additive, lithium iodide (LiI), can tune the cell chemistry to form lithium hydroxide (LiOH) as the product and facilitate the kinetics during the charging process. Although numerous studies have been reported, the role of this additive is still under investigation. Herein, the recent advances focusing on the use of LiI in Li–O 2 batteries are reviewed, its catalytic behavior on discharge and charge is discussed, and its synergistic effect with water is understood. Here, the ambiguity existing among the studies are also revealed, and solutions to the current issues are introduced.

25 ENERGY STORAGE↗
DOE OSTI2023

Metaoptics Enabled Multifunctional Imaging

Despite the fact that most microorganisms occupy two- and three-dimensional space in heterogeneous arrangements and in proximity to other microorganisms of different species, much of our current knowledge about their metabolic processes is derived from homogenizing, then analyzing, the chemical content of cultures containing a single microbial species. This project addressed this fundamental dichotomy by developing a set of optical imaging principles combining multiple new technologies. The imaging strategies developed in this project combine metaoptics structures with active in situ nanoscale control of the chemical environment and applied them to a microbial system, Myxococcus xanthus, with particular relevance to the DoE mission. The combination of metaoptical architectures and nanoscale control over the molecular environment enables: (a) precise control over the electromagnetic (EM) field at length scales smaller than the wavelength of light; (b) control of the interaction of the EM field with critical molecular systems in DOE relevant microbes; (c) control over the chemical environment – especially the presence and quantity of reactive oxygen species (ROS) that can affect redox homeostasis; and (d) the ability to ask new kinds of questions not accessible to ‘omics’ approaches or standard methods of biological imaging. These capabilities are applicable to detailed studies of metabolic pathways in microbes and to lignocellulosic biomass deconstruction. To accomplish these objectives, we pursued two over-arching technical goals: (1) the development of new metaoptics-enabled approaches to imaging and spectroscopic characterization; and (2) the development of tools to control the chemical environment of a microbial sample with nanometer-scale precision. Goal 1 was addressed through the design, fabrication, and characterization of new metasurfaces capable of super-resolution imaging through extreme confinement of the optical field. Goal 2 was addressed by controlling the redox potential on the nanoscale in microbial communities and characterizing their effect on intrinsic bacterial fluorophores which act as molecular sentinels and through characterization of soluble factors secreted by Myxococcus xanthus by confocal Raman imaging. The optical imaging/sensing approaches developed here make it possible to use these powerful new imaging and sensing modalities in metabolic studies by making it possible to visualize and track the spatial and temporal expression patterns of natural or engineered pathways in microorganisms.

09 BIOMASS FUELS↗
DOE OSTI2020

Dynamic changes in dissolved organic matter composition in a Mountain Lake under ice cover and relationships to changes in nutrient cycling and phytoplankton community composition

We studied Bear Lake, a sub-alpine oligotrophic lake in Rocky Mountain National Park, Colorado U.S.A, during the winter ice cover period of 2018. Our goal was to understand relationships between biogeochemical processes and the chemical quality of the dissolved organic matter, a major pool of organic carbon in all lakes. The lake exhibited a highly stratified environment with limited light availability, a consistent oxycline at 7 meters, and dilute hydrochemistry. Nutrient concentrations were low and depletion of nitrogen, particularly for NH4 to a lesser extent NO3, were related to increasing phytoplankton abundance. The deep chlorophyll maxima that developed above the oxycline was dominated by a potentially mixotrophic dinoflagellate. DOM chemical quality as measured through high-resolution mass spectrometry was related to these shifts in aquatic ecosystem structure. However, CDOM spectroscopy of the whole water was a poor indicator of biogeochemical changes in the DOM pool. The spectrometry data highlighted an evolving and contrasting reservoir of phosphorus, nitrogen, and sulfur-containing organic compounds sensitive to nutrient cycling and redox conditions. We also observed reduced chemodiversity between the surface and bottom water DOM molecular formulas over time. Homogeneity increased in the surface and more unique compounds were produced in the bottom waters, where an overall increase occurred in the favorability of carbon to support microbial respiration. Our results show dynamic chemical changes in the DOM pool reflect dynamic nutrient cycling under ice cover, potentially driven by mixotrophic growth of the dinoflagellate Gymnodinium sp.

Rue, Garrett↗
DOE OSTI2019

Electrochemical investigations of high-voltage Na 4 Ni 3 (PO 4 ) 2 P 2 O 7 cathode for sodium-ion batteries

In this work, the electrochemical properties of carbon and reduced graphene-coated Na 4 Ni 3 (PO 4 ) 2 P 2 O 7 materials have been evaluated as high-voltage positive electrodes for sodium-ion batteries. Na 4 Ni 3 (PO 4 ) 2 P 2 O 7 exhibits the highest Ni 3+ /Ni 2+ redox potential of 4.8 V vs. Na + /Na with a theoretical capacity of 127 mAh g -1 . Here, we report on the synthesis and characterizations of Na 4 Ni 3 (PO 4 ) 2 P 2 O 7 -reduced graphene oxide and Na 4 Ni 3 (PO 4 ) 2 P 2 O 7 -carbon composites. The high-voltage dimethyl carbonate–based electrolyte has been chosen to explore the electrochemical properties of Na 4 Ni 3 (PO 4 ) 2 P 2 O 7 as a cathode. Carbon-coated Na 4 Ni 3 (PO 4 ) 2 P 2 O 7 composite electrode delivers a stable discharge capacity of 51 mAh g -1 at 0.1 C rate for 40 cycles which corresponds to a reversible intercalation/de-intercalation of 1.3 sodium ions. The structural deformation has been observed during the charge–discharge process beyond the removal of 1.3 Na + ions and has been confirmed by in situ PXRD measurements. The present results provide a guideline to improve the performances of the high-voltage Na 4 Ni 3 (PO 4 ) 2 P 2 O 7 material for the next generation sodium-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Proton-Coupled Group Transfer Enables Concerted Protonation Pathways Relevant to Small-Molecule Activation

The mechanistic identification of Nature's use of concerted reactions, in which all bond-breaking and bond-making occurs in a single step, has inspired rational designs for artificial synthetic transformations via pathways that bypass high energy intermediates that would otherwise be thermodynamically and kinetically inaccessible. Here, we electrochemically activate an organometallic Ruthenium(II) complex to show that, in acetonitrile solutions, the movement of protons from weak Brønsted acids, such as water and methanol, is coupled with the transfer of its negatively charged counterpart to carbon dioxide (CO 2 ) - a process termed proton-coupled group transfer - to stoichiometrically produce a metal-hydride complex and a carbonate species. These previously unidentified pathways have played key roles in CO 2 and proton reduction catalysis by enabling the generation of key intermediates such as hydrides and metallocarboxylic acids, while its applicability to carbon acids may provide alternative approaches in the electrosynthesis of chemical commodities via alkylation and carboxylation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Subsurface microbial community structure shifts along the geological features of the Central American Volcanic Arc

Subduction of the Cocos and Nazca oceanic plates beneath the Caribbean plate drives the upward movement of deep fluids enriched in carbon, nitrogen, sulfur, and iron along the Central American Volcanic Arc (CAVA). These compounds fuel diverse subsurface microbial communities that in turn alter the distribution, redox state, and isotopic composition of these compounds. Microbial community structure and functions vary according to deep fluid delivery across the arc, but less is known about how microbial communities differ along the axis of a convergent margin as geological features (e.g., extent of volcanism and subduction geometry) shift. Here, we investigate changes in bacterial 16S rRNA gene amplicons and geochemical analysis of deeply-sourced seeps along the southern CAVA, where subduction of the Cocos Ridge alters the geological setting. We find shifts in community composition along the convergent margin, with communities in similar geological settings clustering together independently of the proximity of sample sites. Microbial community composition correlates with geological variables such as host rock type, maturity of hydrothermal fluid and slab depth along different segments of the CAVA. This reveals tight coupling between deep Earth processes and subsurface microbial activity, controlling community distribution, structure and composition along a convergent margin.

Science & Technology - Other Topics↗
NASA NTRS2014

Griffith Saponite as an Analog for Clay Minerals at Yellowknife Bay in Gale Crater, Mars: A Marker for Low-temperature Hydrothermal Processes

The CheMin X-ray diffraction (XRD) instrument onboard the Mars Science Laboratory rover Curiosity in Gale Crater, Mars, discovered smectite in drill fines of the Sheepbed mudstone at Yellowknife Bay (YNB). The mudstone has a basaltic composition, and the XRD powder diffraction pattern shows smectite 02l diffraction bands peaking at 4.59 A for targets John Klein and Cumberland, consistent with tri-octahedral smectites (saponite). From thermal analysis, the saponite abundance is ~20 wt. %. Among terrestrial analogues we have studied, ferrian saponite from Griffith Park (Los Angeles, CA) gives the best match to the position of the 02l diffraction band of YNB saponites. Here we describe iron-rich saponites from a terrestrial perspective, with a focus on Griffith saponite, and discuss their implications for the mineralogy of Sheepbed saponite and its formation pathways. Iron-rich saponite: Iron-rich saponite on the Earth is recognized as a low-temperature (<100 C), authigenic alteration product of basalt [e.g., 4-16]. In the discussion that follows, we reference the position of the 02l band because it is a measure of the unit cell 'b' dimension of the octahedral layer and thus the cations (including Fe redox state) in the octahedral layer. Ordinarily, the 06l band near 1.5 A is used to determine the 'b' dimension of smectite, but this band is not accessible with MSL CheMin instrument. For reference, a ferrosaponite (i.e., Fe2+ saponite) studied by [15] has a 02l spacing of 4.72 A and Fe3+/Fe = 0.27 [15]. Samples of terrestrial ferrosaponite, however, are reported to oxidize on the timescale of days when removed from their natural environment and not protected from oxidation. The Griffith saponite is Mg-rich ferrian saponite, and sample AMNH 89172 has an 02l spacing of 4.59 A (same as the Sheepbed saponites) and Fe3+/Fe = 0.64 [3]. This similarity suggests that Sheepbed saponites are ferrian (incompletely oxidized ferrosaponite). More oxidized Griffith saponites (Fe3+/Fe > 0.90) have somewhat smaller 02l d-spacings and also show Mossbauer evidence for an XRD amorphous Fe-bearing phase (e.g., ferrihydrite, hisingerite, superparamagnetic ferric oxides, etc.). The Griffith saponite occurs as vesicle fills, as replacements of olivine, and as replacements of mesostasis (basaltic glass). Similar occurrence modes are reported elsewhere. Hisingerite has been proposed by [13] as the alteration product of ferrian saponite whose precursor by oxidation was ferrosaponite.

Morris, R.V.↗