Search NASA⌕ Search

SEARCH · Search NASA

Results for “STRONG FORCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Effect of homolog doping on surface morphology and mass-loss rates from PETN crystals. Studies using atomic force microscope and thermo-gravimetric analysis

Pentaerythritol tetranitrate (PETN) is an important energetic material and its performance as a secondary explosive depends strongly on the density as well as flow porosity of powdered material, which in turn is governed by the size and surface properties of the PETN crystallite particles. Historically there has been evidence that the surface properties of PETN particles can be strongly influenced by the presence of homolog impurities of PETN, in particular, dipentaerythritol hexanitrate (diPEHN) and tripentaerythritol octanitrate (triPEON), although not many systematic studies characterizing such influence exist. In this work we employ thermogravimetric analysis (TGA) to measure mass-loss rates at elevated temperatures and show that doping with a small amount of diPEHN and triPEON can reduce the mass-loss rate from PETN single-crystal surfaces by as much as 35 % as compared to undoped crystals. Arrhenius plots of mass-loss rates as a function of temperature suggest that the reduction in evaporation is not due to the change in activation barrier of the molecular evaporation process, but perhaps due to the impedance to the receding motion of the steps by the immobile impurities on the surface. Removal of surface impurities through gentle washing with ethanol leads to enhanced mass-loss rate relative to pure PETN suggesting a roughened surface morphology. Some surface roughening in doped crystals is supported by Atomic force microscopy (AFM) images of growth layers that show evidences of growth layer stacking and rough edges. Furthermore, we find that a larger amount of impurity added to the original solution does not necessarily lead to a more highly doped crystal, which could perhaps be interpreted as PETN crystals being able to accommodate only up to a certain weight percent of homolog impurities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Renormalization versus strong form factors for one-boson-exchange potentials

We analyze the one-boson-exchange potential from the point of view of renormalization theory. We show that the nucleon-meson Lagrangian, while predicting the NN force, does not predict the NN scattering matrix nor the deuteron properties unambiguously due to the appearance of short distance singularities. While the problem has traditionally been circumvented by introducing vertex functions via phenomenological strong form factors, we propose to impose physical renormalization conditions on the scattering amplitude at low energies. Working in the large N{sub c} approximation with pi, sigma, rho, and omega mesons we show that, once these conditions are applied, results for low-energy phases of proton-neutron scattering as well as deuteron properties become largely insensitive to the form factors and to the vector mesons yielding reasonable agreement with the data and for realistic values of the coupling constants.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

I Would Like to Know... [Slides]

Problems of High-Energy Physics (NAL Design Report, January 1968) We would like to have answers to many questions. Among them are the following: Which, if any, of the particles that have so far been discovered, is, in fact, elementary, and is there any validity in the concept of “elementary” particles? What new particles can be made at energies that have not yet been reached? Is there some set of building blocks that is still more fundamental than the neutron and the proton? Is there a law that correctly predicts the existence and nature of all the particles, and if so, what is that law? Will the characteristics of some of the very short-lived particles appear to be different when they are produced at such higher velocities that they no longer spend their entire lives within the strong influence of the particle from which they are produced? Do new symmetries appear or old ones disappear for high momentum-transfer events? What is the connection, if any, of electromagnetism and strong interactions? Do the laws of electromagnetic radiation, which are now known to hold over an enormous range of lengths and frequencies, continue to hold in the wavelength domain characteristic of the subnuclear particles? What is the connection between the weak interaction that is associated with the massless neutrino and the strong one that acts between neutron and proton? Is there some new particle underlying the action of the “weak” forces, just as, in the case of the nuclear force, there are mesons, and, in the case of the electromagnetic force, there are photons? If there is not, why not? In more technical terms: Is local field theory valid? A failure in locality may imply a failure in our concept of space. What are the fields relevant to a correct local field theory? What are the form factors of the particles? What exactly is the explanation of the electromagnetic mass difference? Do “weak” interactions become strong at sufficiently small distances? Is the Pomeranchuk theorem true? Do the total cross sections become constant at high energy? Will new symmetries appear, or old ones disappear, at higher energy?

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Applied Meteorology Unit (AMU) Quarterly Report

This Quarter's Highlights include reports on the following tasks: (1) Mr. Wheeler completed a study for the 30th Weather Squadron at Vandenberg Air Force Base in California in which he found precursors in weather observations that will help the forecasters determine when they will get strong wind gusts at their northern towers. The final report is now on the AMU website at http://science.ksc.nasa.gov/amu/final-reports/30ws-north-base-winds.pdf. (2) continued work on the second phase of verifying the performance of the MesoNAM weather model at Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS). (3) continued work to improve the AMU peak wind tool by analyzing wind tower data to determine peak wind behavior during times of onshore and offshore flow. (4) continued updating lightning c1imatologies for KSC/CCAFS and other airfields around central Florida and created new c1imatologies for moisture and stability thresholds.

Bauman, William↗

Impact of MgO thickness on the perpendicular magnetic anisotropy of Mo/Co2FeAl/MgO/Mo multilayers with improved annealing stability

Highlights: • Robust PMA is demonstrated for thermally stable Mo/Co{sub 2}FeAl(CFA)/MgO/Mo multilayer. • Thickness of CFA and MgO over-layer plays a main role in achieving the strong PMA. • Significant PMA energy of K{sub eff} ≈ 1.67 × 10{sup 6} erg/cm{sup 3} is achieved for film annealed at 400 °C. • Co and/or Fe – 3d{sub Z}{sup 2} and O-2P{sub Z} orbital hybridization at interface is the origin for PMA. - Abstract: In this study, an interfacial perpendicular magnetic anisotropy (PMA) is achieved in Mo/Co{sub 2}FeAl (CFA)/MgO/Mo multilayer with good thermal stability up to 400 °C by tuning the annealing temperature and film thickness of CFA and MgO. For an optimized CFA film thickness (1.0 nm) and annealing temperature (400 °C), the CFA/MgO interface plays a main role in achieving the strong PMA property when the MgO film thickness was tuned from 0.5 nm to 2.0 nm. The effective perpendicular magnetic anisotropy energy density (K{sub eff}) is approximately 1.67 × 10{sup 6} erg/cc when t{sub MgO} = 2 nm. Surface morphology and surface roughness changes in the films are investigated by atomic force microscopy (AFM). An enhancement in surface smoothness is observed for the annealed films. X-ray photoelectron spectroscopy (XPS) reveals that the strong PMA in Mo/CFA/MgO is originated from the adequate oxidation of Co and Fe at CFA/MgO interface.

36 MATERIALS SCIENCE↗

A Transferable Force Field for Simulating Adsorption in Metal–Organic Frameworks with Open Metal Sites Based on the 12–6–4 Lennard-Jones Potential

Metal−organic frameworks (MOFs) that contain coordinatively unsaturated open metal sites (OMSs) provide strong host− guest interactions, making them promising sorbents for low-concentration gas adsorption applications such as direct air capture and atmospheric water harvesting. However, accurately modeling host−guest interactions involving OMSs remains challenging for classical force fields (FFs) based on the 12−6 Lennard−Jones (LJ) potential, as the polarization effect of the guest molecule induced by the positively charged OMS is not considered. Here, we introduce an FF based on the 12−6−4 LJ potential, which incorporates charge−induced dipole interactions and is parametrized against a diverse set of host−guest potential energy surfaces (PESs) obtained from density functional theory (DFT). The resulting FF, trained on a generic trimetallic cluster, performs well in both host−guest binding energetics and gas adsorption isotherms across different OMS-containing MOFs, including MOF-74 series and Cu-BTC. These results highlight the excellent transferability of our approach and its potential to enhance the accuracy and robustness of high-throughput MOF discovery workflows, particularly for gas adsorption and separation in large and diverse MOF databases.

36 MATERIALS SCIENCE↗

Conservative corrections to the innermost stable circular orbit (ISCO) of a Kerr black hole: A new gauge-invariant post-Newtonian ISCO condition, and the ISCO shift due to test-particle spin and the gravitational self-force

The innermost stable circular orbit (ISCO) delimits the transition from circular orbits to those that plunge into a black hole. In the test-mass limit, well-defined ISCO conditions exist for the Kerr and Schwarzschild spacetimes. In the finite-mass case, there are a large variety of ways to define an ISCO in a post-Newtonian (PN) context. Here I generalize the gauge-invariant ISCO condition of Blanchet and Iyer [Classical Quantum Gravity 20, 755 (2003)] to the case of spinning (nonprecessing) binaries. The Blanchet-Iyer ISCO condition has two desirable and unexpected properties: (1) it exactly reproduces the Schwarzschild ISCO in the test-mass limit, and (2) it accurately approximates the recently calculated shift in the Schwarzschild ISCO frequency due to the conservative-piece of the gravitational self-force [L. Barack and N. Sago, Phys. Rev. Lett. 102, 191101 (2009)]. The generalization of this ISCO condition to spinning binaries has the property that it also exactly reproduces the Kerr ISCO in the test-mass limit (up to the order at which PN spin corrections are currently known). The shift in the ISCO due to the spin of the test-particle is also calculated. Remarkably, the gauge-invariant PN ISCO condition exactly reproduces the ISCO shift predicted by the Papapetrou equations for a fully relativistic spinning particle. It is surprising that an analysis of the stability of the standard PN equations of motion is able (without any form of 'resummation') to accurately describe strong-field effects of the Kerr spacetime. The ISCO frequency shift due to the conservative self-force in Kerr is also calculated from this new ISCO condition, as well as from the effective-one-body Hamiltonian of Barausse and Buonanno [Phys. Rev. D 81, 084024 (2010)]. These results serve as a useful point of comparison for future gravitational self-force calculations in the Kerr spacetime.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Hydraulic concentration of fields in the solar photosphere. IV - Evolution of fields near equipartition

It has previously been inferred that small isolated flux tubes appearing in supergranule boundaries are compressed to 1500 gauss or more. This paper considers whether some dynamic condition within a flux tube exists which provides both stability and a 'mechanical advantage' so that a small force over a small period of time can accomplish the enormous compression from the weak-field to the strong-field state. It is found that the equipartition solutions to the hydromagnetic equations apparently may have the desired property of permitting an infinitesimal external pressure to convert a gentle flow of gas along a weak field into a very intense field through a succession of equipartition states. An illustrative example is presented, and field compression by convective forces is analyzed.

Parker, E. N.↗

A production-tagged aerosol module for Earth system models, OsloAero5.3 – extensions and updates for CAM5.3-Oslo

Abstract. We document model updates and present and discuss modeling and validation results from a further developed production-tagged aerosol module, OsloAero5.3, for use in Earth system models. The aerosol module has in this study been implemented and applied in CAM5.3-Oslo. This model is based on CAM5.3–CESM1.2 and its own predecessor model version CAM4-Oslo. OsloAero5.3 has improved treatment of emissions, aerosol chemistry, particle life cycle, and aerosol–cloud interactions compared to its predecessor OsloAero4.0 in CAM4-Oslo. The main new features consist of improved aerosol sources; the module now explicitly accounts for aerosol particle nucleation and secondary organic aerosol production, with new emissions schemes also for sea salt, dimethyl sulfide (DMS), and marine primary organics. Mineral dust emissions are updated as well, adopting the formulation of CESM1.2. The improved model representation of aerosol–cloud interactions now resolves heterogeneous ice nucleation based on black carbon (BC) and mineral dust calculated by the model and treats the activation of cloud condensation nuclei (CCN) as in CAM5.3. Compared to OsloAero4.0 in CAM4-Oslo, the black carbon (BC) mass concentrations are less excessive aloft, with a better fit to observations. Near-surface mass concentrations of BC and sea salt aerosols are also less biased, while sulfate and mineral dust are slightly more biased. Although appearing quite similar for CAM5.3-Oslo and CAM4-Oslo, the validation results for organic matter (OM) are inconclusive, since both of the respective versions of OsloAero are equipped with a limited number of OM tracers for the sake of computational efficiency. Any information about the assumed mass ratios of OM to organic carbon (OC) for different types of OM sources is lost in the transport module. Assuming that observed OC concentrations scaled by 1.4 are representative for the modeled OM concentrations, CAM5.3-Oslo with OsloAero5.3 is slightly inferior for the very sparsely available observation data. Comparing clear-sky column-integrated optical properties with data from ground-based remote sensing, we find a negative bias in optical depth globally; however, it is not as strong as in CAM4-Oslo, but has positive biases in some areas typically dominated by mineral dust emissions. Aerosol absorption has a larger negative bias than the optical depth globally. This is reflected in a lower positive bias in areas where mineral dust is the main contributor to absorption. Globally, the low bias in absorption is smaller than in CAM4-Oslo. The Ångström parameter exhibits small biases both globally and regionally, suggesting that the aerosol particle sizes are reasonably well represented. Cloud-top droplet number concentrations over oceans are generally underestimated compared to satellite retrievals, but seem to be overestimated downwind of major emissions of dust and biomass burning sources. Finally, we find small changes in direct radiative forcing at the top of the atmosphere, while the cloud radiative forcing due to anthropogenic aerosols is now more negative than in CAM4-Oslo, being on the strong side compared to the multi-model estimate in IPCC AR5. Although not all validation results in this study show improvement for the present CAM5.3-Oslo version, the extended and updated aerosol module OsloAero5.3 is more advanced and applicable than its predecessor OsloAero4.0, as it includes new parameterizations that more readily facilitate sensitivity and process studies and use in climate and Earth system model studies in general.

54 ENVIRONMENTAL SCIENCES↗

Overview of ACE-Asia Spring 2001 Investigations On Aerosol-Radiation Interactions

ACE-Asia's extensive measurements from land, ocean, air and space quantified aerosol-radiation interactions. Results from each platform type, plus satellite-suborbital combinations, include: 1. Time series of multiwavelength aerosol optical depth (ADD), Angstrom exponent (alpha), single-scattering albedo (SSA), and size distribution from AERONET radiometry at 13 stations. In China and Korea AOD and alpha were strongly anticorrelated (reflecting transient dust events); dust volume-size modes peaked near 8 microns diameter; and SSA(dust) greater than SSA(pollution). 2. Calculations and measurements of photosynthetically active radiation and aerosols in China yield 24-h average downward surface radiative forcing per AOD(500 nm) of -27 W/sq m (400-700 nm). 3. The Hawaii-Japan cruise sampled a gradient with AOD(500 nm) extremes of 0.1 and 1.1. Shipboard measurements showed that adding dust to pollution increased SSA(550 nm, 55% RH), typically from -0.91 to approx. 0.97. Downwelling 8-12 micron radiances showed aerosol effects, especially in the major April dust event, with longwave forcing estimated at -5 to 15 W/sq m. 4. Extinction profiles from airborne sunphotometry and total-direct-diffuse radiometry show wavelength dependence often varying strongly with height, reflecting layering of dust-dominated over pollution-dominated aerosols. Comparing sunphotometric extinction profiles to those from in situ measurements (number and composition vs size, or scattering and absorption) shows layer heights agree, but extinction sometimes differs. 5. Airborne solar spectral flux radiometry yields absorption spectra for layers. Combining with AOD spectra yields best-fit aerosol single scattering albedo spectra. 6. Visible, NIR and total solar fluxes combined with AOD give radiative forcing efficiencies at surface and aloft.

Russell, P. B.↗

Superbanana transport in the collisional heating of a plasma column forced across a squeeze potential

When weakly collisional plasmas have locally trapped particle populations, perturbations to the plasma equilibrium (such as waves or static field-errors) can induce phase-space discontinuities in the particle distribution function that strongly enhance entropy production, plasma loss, and wave damping via superbanana transport. Here, this paper presents a simple version of this superbanana transport process, wherein a plasma is heated as it is slowly forced back and forth across a squeeze potential (at a frequency ω that is small compared with the particle bounce frequency). The squeeze potential traps low-energy particles on either side of the squeeze, but particles with higher energy can pass through it. Trapped and passing particles have different responses to the forcing, causing a collisionless discontinuity in the distribution function at the separatrix between the trapped and passing particles. Expressions for both the adiabatic and non-adiabatic distribution functions are presented, and the heating rate caused by collisional broadening of the separatrix discontinuity is derived. The heating rate is proportional to √νω , provided that ν<<ω, where ν is the collision rate (i.e., the √ν regime of superbanana theory).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Identification of nonlinear structural elements by force-state mapping

A major contributor to the passive damping and potentially nonlinear behavior of large space structures is the behavior of the joints. Proposed is an experimental technique called 'force-state mapping' that will allow ground testing of these key structural elements. The technique includes the use of very accurate instrumentation to measure the force transmission properties of a structural element as a function of its mechanical state. When these data are presented in the form of a force-state map, the nonlinearities exhibit distinctively recognizable patterns. This presentation of the data allows the extraction of the describing parameters of the linear and nonlinear behavior and the energy dissipation characteristics of the joint. A series of tests were carried out on an idealized laboratory test article to demonstrate the technique. Strong structural nonlinearities, including a cubic hardening spring, friction, and impact phenomena, were introduced and measured. Parameters identified by the force-state mapping technique are compared with those made by traditional techniques and the errors involved in the measurement are estimated.

Crawley, E. F.↗

Simulated responses of terrestrial aridity to black carbon and sulfate aerosols

Aridity index (AI), defined as the ratio of precipitation to potential evapotranspiration (PET), is a measure of the dryness of terrestrial climate. Global climate models generally project future decreases of AI (drying) associated with global warming scenarios driven by increasing greenhouse gas and declining aerosols. Given their different effects in the climate system, scattering and absorbing aerosols may affect AI differently. In this work, we explore the terrestrial aridity responses to anthropogenic black carbon (BC) and sulfate (SO 4 ) aerosols with Community Earth System Model simulations. Positive BC radiative forcing decreases precipitation averaged over global land at a rate of 0.9%/°C of global mean surface temperature increase (moderate drying), while BC radiative forcing increases PET by 1.0%/°C (also drying). BC leads to a global decrease of 1.9%/°C in AI (drying). SO 4 forcing is negative and causes precipitation a decrease at a rate of 6.7%/°C cooling (strong drying). PET also decreases in response to SO 4 aerosol cooling by 6.3%/°C cooling (contributing to moistening). Thus, SO 4 cooling leads to a small decrease in AI (drying) by 0.4%/°C cooling. Despite the opposite effects on global mean temperature, BC and SO 4 both contribute to the twentieth century drying (AI decrease). Sensitivity test indicates that surface temperature and surface available energy changes dominate BC- and SO 4 -induced PET changes.

54 ENVIRONMENTAL SCIENCES↗

Nitrogen enrichment suppresses other environmental drivers and homogenizes salt marsh leaf microbiome

Microbial community assembly is affected by a combination of forces that act simultaneously, but the mechanisms underpinning their relative influences remain elusive. This gap strongly limits our ability to predict human impacts on microbial communities and the processes they regulate. Here, we experimentally demonstrate that increased salinity stress, food web alteration and nutrient loading interact to drive outcomes in salt marsh fungal leaf communities. Both salinity stress and food web alterations drove communities to deterministically diverge, resulting in distinct fungal communities. Increased nutrient loads, nevertheless, partially suppressed the influence of other factors as determinants of fungal assembly. Using a null model approach, we found that increased nutrient loads enhanced the relative importance of stochastic over deterministic divergent processes; without increased nutrient loads, samples from different treatments showed a relatively (deterministic) divergent community assembly whereas increased nutrient loads drove the system to more stochastic assemblies, suppressing the effect of other treatments. These results demonstrate that common anthropogenic modifications can interact to control fungal community assembly. As a result, our results suggest that when the environmental conditions are spatially heterogeneous (as in our case, caused by specific combinations of experimental treatments), increased stochasticity caused by greater nutrient inputs can reduce the importance of deterministic filters that otherwise caused divergence, thus driving to microbial community homogenization.

54 ENVIRONMENTAL SCIENCES↗

A novel red phosphor Na{sub 2}Ca{sub 4}Mg{sub 2}Si{sub 4}O{sub 15}:Eu{sup 3+} for plasma display panels

A novel red emitting phosphor, Eu{sup 3+}-doped Na{sub 2}Ca{sub 4}Mg{sub 2}Si{sub 4}O{sub 15}, was prepared by the solid-state reaction. X-ray powder diffraction (XRD) analysis confirmed the formation of Na{sub 2}Ca{sub 4}Mg{sub 2}Si{sub 4}O{sub 15}:Eu{sup 3+}. Field-emission scanning electron-microscopy (FE-SEM) observation indicated a narrow size-distribution of about 300 nm for the particles with spherical shape. Upon excitation with vacuum ultraviolet (VUV) and near UV light, the phosphor showed strong red-emission lines at around 611 and 617 nm, respectively, corresponding to the forced electric dipole {sup 5}D{sub 0} {yields} {sup 7}F{sub 2} transition of Eu{sup 3+}, and the highest PL intensity at 617 nm was found at a content of about 8 mol% Eu{sup 3+}. The optical properties study suggests that it is a potential candidate for plasma display panels (PDPs) application.

36 MATERIALS SCIENCE↗

Elucidating the Mechanism of Helium Evaporation from Liquid Water

Here, we investigate the evaporation of trace amounts of helium solvated in liquid water using molecular dynamics simulations and theory. Consistent with experimental observations, we find a super-Maxwellian distribution of kinetic energies of evaporated helium. This excess of kinetic energy over typical thermal expectations is explained by an effective continuum theory of evaporation based on a Fokker–Planck equation, parametrized molecularly by a potential of mean force and position-dependent friction. Using this description, we find that helium evaporation is strongly influenced by the friction near the interface, which is anomalously small near the Gibbs dividing surface due to the ability of the liquid–vapor interface to deform around the gas particle. Our reduced description provides a mechanistic interpretation of trace gas evaporation as the motion of an underdamped particle in a potential subject to a viscous environment that varies rapidly across the air–water interface. From it we predict the temperature dependence of the excess kinetic energy of evaporation, which is yet to be measured.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamical insights into the mechanism of a droplet detachment from a fiber

Quantifying the detachment behavior of a droplet from a fiber is important in many applications such as fog harvesting, oil–water separation, or water management in fuel cells. When the droplets are forcibly removed from hydrophilic fibers, the ease of detachment strongly depends on droplet volume and the rate of the process controlled by the applied force. Experiments, conducted on a ferrofluid under magnetic force, as well as continuum level calculations from fluid mechanics have so far been unable to resolve the time-dependent dynamics of droplet detachment and, most importantly, to assess the role of the applied force as the key determinant of the volume of the droplet residue remaining on the fiber after detachment. In the present work, we study the mechanism of water droplet detachment and retention of residual water on smooth hydrophilic fibers using nonequilibrium molecular dynamics simulations. We investigate how the applied force affects the breakup of a droplet and how the minimal detaching force per unit mass decreases with droplet size. We extract scaling relations that allow extrapolation of our findings to larger length scales that are not directly accessible by molecular models. We find that the volume of the residue on a fiber varies nonmonotonically with the detaching force, reaching the maximal size at an intermediate force and associated detachment time. The strength of this force decreases with the size of the drop, while the maximal residue increases with the droplet volume, V, sub-linearly, in proportion to the V 2/3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interaction of photosensitive surfactant with DNA and poly acrylic acid

In this paper, we investigate interactions and phase transitions in polyelectrolyte-surfactant complexes formed between a cationic azobenzene-containing surfactant and two types of polyelectrolytes: natural (DNA) or synthetic (PAA: poly acrylic acid). The construction of a phase diagram allowed distancing between four major phases: extended coil conformation, colloidally stable compacted globules, colloidal instability range, and surfactant-stabilized compact state. Investigation on the complexes’ properties in different phases and under irradiation with UV light provides information about the role of the surfactant's hydrophobic trans isomers both in the formation and destruction of DNA and PAA globules as well as in their colloidal stabilization. The trans isomer shows much stronger affinity to the polyelectrolytes than the hydrophilic cis counterpart. There is no need for complete compensation of the polyelectrolyte charges to reach the complete compaction. On contrary to the findings previously reported in the literature, we demonstrate – for the first time – complete polyelectrolyte compaction which occurs already at 20% of DNA (and at 50% of PAA) charge compensation. The trans isomer plays the main role in the compaction. The aggregation between azobenzene units in the photosensitive surfactant is a driving force of this process. The decompaction can be realized during UV light irradiation and is strongly influenced by the interplay between surfactant-surfactant and surfactant-DNA interactions in the compacted globules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗