Search NASA⌕ Search

SEARCH · Search NASA

Results for “Time parallelization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

Waveguide Photonic Choke Joint with Wide Out-of-Band Rejection

A photonic choke joint structure with a wide- stop-band is proposed for use as a waveguide flange interface. The structure consists of arrays of square metal pillars arranged in a periodic pattern to suppress the dominant-mode wave propagation in parallel-plate waveguide over a wide frequency bandwidth. The measurement results at microwave frequencies confirm the structure can provide broadband suppression, more than 56 dB over 6.25 times its operating frequency. Applications at millimeter wavelength are discussed.

U-yen, Kongpop↗
NASA NTRS2017

Robotically Assembled Aerospace Structures: Digital Material Assembly using a Gantry-Type Assembler

This paper evaluates the development of automated assembly techniques for discrete lattice structures using a multi-axis gantry type CNC machine. These lattices are made of discrete components called digital materials. We present the development of a specialized end effector that works in conjunction with the CNC machine to assemble these lattices. With this configuration we are able to place voxels at a rate of 1.5 per minute. The scalability of digital material structures due to the incremental modular assembly is one of its key traits and an important metric of interest. We investigate the build times of a 5x5 beam structure on the scale of 1 meter (325 parts), 10 meters (3,250 parts), and 30 meters (9,750 parts). Utilizing the current configuration with a single end effector, performing serial assembly with a globally fixed feed station at the edge of the build volume, the build time increases according to a scaling law of n4, where n is the build scale. Build times can be reduced significantly by integrating feed systems into the gantry itself, resulting in a scaling law of n3. A completely serial assembly process will encounter time limitations as build scale increases. Automated assembly for digital materials can assemble high performance structures from discrete parts, and techniques such as built in feed systems, parallelization, and optimization of the fastening process will yield much higher throughput.

Mechanical Structure↗
NASA NTRS2017

Robotically Assembled Aerospace Structures: Digital Material Assembly using a Gantry-Type Assembler

This paper evaluates the development of automated assembly techniques for discrete lattice structures using a multi-axis gantry type CNC machine. These lattices are made of discrete components called "digital materials." We present the development of a specialized end effector that works in conjunction with the CNC machine to assemble these lattices. With this configuration we are able to place voxels at a rate of 1.5 per minute. The scalability of digital material structures due to the incremental modular assembly is one of its key traits and an important metric of interest. We investigate the build times of a 5x5 beam structure on the scale of 1 meter (325 parts), 10 meters (3,250 parts), and 30 meters (9,750 parts). Utilizing the current configuration with a single end effector, performing serial assembly with a globally fixed feed station at the edge of the build volume, the build time increases according to a scaling law of n4, where n is the build scale. Build times can be reduced significantly by integrating feed systems into the gantry itself, resulting in a scaling law of n3. A completely serial assembly process will encounter time limitations as build scale increases. Automated assembly for digital materials can assemble high performance structures from discrete parts, and techniques such as built in feed systems, parallelization, and optimization of the fastening process will yield much higher throughput.

Manufacturing↗
NASA NTRSDate not supplied

Failure Behavior and Control-Based Mitigation for a Parallel Hybrid Propulsion System

NASA is pursuing research to advance Electrified Aircraft Propulsion (EAP) technologies that address fuel burn and emission reduction goals. EAP brings the potential for improved performance over the state of the art. However, for these systems to be practical and certifiable, they need to possess adequate robustness to adverse conditions including a variety of system failures that are not applicable to conventional turbofans today. Numerous EAP concepts interface gas turbine engines with an electrical power system that includes electric machines and sometimes electrical energy storage. The expansion of the powertrain increases the probability of encountering a failure and introduces new failure modes. Failures within the electrical power system may also impact the gas turbine engine(s) to which the electrical powertrain is coupled. This effort investigates failures originating in the electrical power system and their impact on the parallel hybrid propulsion system. Reversionary control strategies are also demonstrated to reduce the impact of the failures. Failure mitigation strategies were devised and employed in simulation. Various failure scenarios were simulated including those occurring during steady state operation, transients, and takeoff and landing scenarios. The timing of the failure and delay in failure identification and activation of mitigation strategies are noteworthy variables in the study. While the system remained stable throughout all failure scenarios, delays in failure identification could result in undesirable conditions such as increased operating temperatures and reduced stall margin. The results demonstrate successful mitigation of failures through reversionary control modes and help to generate confidence in the robustness of the conceptual parallel hybrid propulsion system.

Failure behavior↗
NASA NTRSDate not supplied

Failure Behavior and Control Based Mitigation for a Parallel Hybrid Propulsion System

NASA is pursuing research to advance Electrified Aircraft Propulsion (EAP) technologies that address fuel burn and emission reduction goals. EAP brings the potential for improved performance over the state of the art. However, for these systems to be practical and certifiable, they need to possess adequate robustness to adverse conditions including a variety of system failures that are not applicable to conventional turbofans today. Numerous EAP concepts interface gas turbine engines with an electrical power system that includes electric machines and sometimes electrical energy storage. The expansion of the powertrain increases the probability of encountering a failure and introduces new failure modes. Failures within the electrical power system may also impact the gas turbine engine(s) to which the electrical powertrain is coupled. This effort investigates failures originating in the electrical power system and their impact on the parallel hybrid propulsion system. Reversionary control strategies are also demonstrated to reduce the impact of the failures. Failure mitigation strategies were devised and employed in simulation. Various failure scenarios were simulated including those occurring during steady state operation, transients, and takeoff and landing scenarios. The timing of the failure and delay in failure identification and activation of mitigation strategies are noteworthy variables in the study. While the system remained stable throughout all failure scenarios, delays in failure identification could result in undesirable conditions such as increased operating temperatures and reduced stall margin. The results demonstrate successful mitigation of failures through reversionary control modes and help to generate confidence in the robustness of the conceptual parallel hybrid propulsion system.

Failure behavior↗
NASA NTRS2002

Time-Dependent Simulations of Turbopump Flows

Unsteady flow simulations for RLV (Reusable Launch Vehicles) 2nd Generation baseline turbopump for one and half impeller rotations have been completed by using a 34.3 Million grid points model. MLP (Multi-Level Parallelism) shared memory parallelism has been implemented in INS3D, and benchmarked. Code optimization for cash based platforms will be completed by the end of September 2001. Moving boundary capability is obtained by using DCF module. Scripting capability from CAD (computer aided design) geometry to solution has been developed. Data compression is applied to reduce data size in post processing. Fluid/Structure coupling has been initiated.

Kiris, Cetin↗
NASA NTRS2006

Progress in Computational Simulation of Earthquakes

GeoFEST(P) is a computer program written for use in the QuakeSim project, which is devoted to development and improvement of means of computational simulation of earthquakes. GeoFEST(P) models interacting earthquake fault systems from the fault-nucleation to the tectonic scale. The development of GeoFEST( P) has involved coupling of two programs: GeoFEST and the Pyramid Adaptive Mesh Refinement Library. GeoFEST is a message-passing-interface-parallel code that utilizes a finite-element technique to simulate evolution of stress, fault slip, and plastic/elastic deformation in realistic materials like those of faulted regions of the crust of the Earth. The products of such simulations are synthetic observable time-dependent surface deformations on time scales from days to decades. Pyramid Adaptive Mesh Refinement Library is a software library that facilitates the generation of computational meshes for solving physical problems. In an application of GeoFEST(P), a computational grid can be dynamically adapted as stress grows on a fault. Simulations on workstations using a few tens of thousands of stress and displacement finite elements can now be expanded to multiple millions of elements with greater than 98-percent scaled efficiency on over many hundreds of parallel processors (see figure).

Donnellan, Andrea↗
NASA NTRS1988

Retargeting of existing FORTRAN program and development of parallel compilers

The software models used in implementing the parallelizing compiler for the B-HIVE multiprocessor system are described. The various models and strategies used in the compiler development are: flexible granularity model, which allows a compromise between two extreme granularity models; communication model, which is capable of precisely describing the interprocessor communication timings and patterns; loop type detection strategy, which identifies different types of loops; critical path with coloring scheme, which is a versatile scheduling strategy for any multicomputer with some associated communication costs; and loop allocation strategy, which realizes optimum overlapped operations between computation and communication of the system. Using these models, several sample routines of the AIR3D package are examined and tested. It may be noted that automatically generated codes are highly parallelized to provide the maximized degree of parallelism, obtaining the speedup up to a 28 to 32-processor system. A comparison of parallel codes for both the existing and proposed communication model, is performed and the corresponding expected speedup factors are obtained. The experimentation shows that the B-HIVE compiler produces more efficient codes than existing techniques. Work is progressing well in completing the final phase of the compiler. Numerous enhancements are needed to improve the capabilities of the parallelizing compiler.

Agrawal, Dharma P.↗
NASA NTRS1996

Application of the pressure sensitive paint technique to steady and unsteady flow

Pressure sensitive paint is a newly-developed optical measurement technique with which one can get a continuous pressure distribution in much shorter time and lower cost than a conventional pressure tap measurement. However, most of the current pressure sensitive paint applications are restricted to steady pressure measurement at high speeds because of the small signal-to-noise ratio at low speed and a slow response to pressure changes. In the present study, three phases of work have been completed to extend the application of the pressure sensitive paint technique to low-speed testing and to investigate the applicability of the paint technique to unsteady flow. First the measurement system using a commercially available PtOEP/GP-197 pressure sensitive paint was established and applied to impinging jet measurements. An in-situ calibration using only five pressure tap data points was applied and the results showed good repeatability and good agreement with conventional pressure tap measurements on the whole painted area. The overall measurement accuracy in these experiments was found to be within 0.1 psi. The pressure sensitive paint technique was then applied to low-speed wind tunnel tests using a 60 deg delta wing model with leading edge blowing slots. The technical problems encountered in low-speed testing were resolved by using a high grade CCD camera and applying corrections to improve the measurement accuracy. Even at 35 m/s, the paint data not only agreed well with conventional pressure tap measurements but also clearly showed the suction region generated by the leading edge vortices. The vortex breakdown was also detected at alpha=30 deg. It was found that a pressure difference of 0.2 psi was required for a quantitative pressure measurement in this experiment and that temperature control or a parallel temperature measurement is necessary if thermal uniformity does not hold on the model. Finally, the pressure sensitive paint was applied to a periodically changing pressure field with a 12.8s time period. A simple first-order pole model was applied to deal with the phase lag of the paint. The unsteady pressure estimated from the time-changing pressure sensitive paint data agreed well with the pressure transducer data in regions of higher pressure and showed the possibility of extending the technique to unsteady pressure measurements. However, the model still needs further refinement based on the physics of the oxygen diffusion into the paint layer and the oxygen quenching on the paint luminescence.

Shimbo, Y.↗
NASA NTRS2003

Step Bunching and Solution Flow

Imagine a sequence of equidistant steps parallel to one another on a crystal face growing from solution. Steps may be one or part of a lattice spacing high. With such ideal morphology, the most perfect material is expected to be produced. Sometimes this happens. Much more often, however, steps form bunches, acquire wavy shapes and interlace. With time, these spontaneous perturbations may be increased in amplitude, i.e. the stepped surface becomes morphologically unstable. Interferometric studies of Y.G. Kuznetsov, L.N. Rashkovich, P.G. Vekilov and N.A. Booth and the author demonstrated that the step bunching depends at least on direction and rate of solution flow over the interface, supersaturation and presence of impurities. In particular, if solution and step flow are parallel to one another, the steps convene into bunches. If these flows are antiparallel, the bunches disappear. As the step train propagates, the overall bunch height often increases infinitely. However, we have found recently that if the flow rate is large enough, (approximately 1 meter per second), the bunch height may be limited. All these phenomena come from interaction between steps. The interaction mechanisms are still not fully understood. I plan to overview major approaches to the still unresolved problem on how these dissipative structures on growing crystal face appear and evolve.

Chernov, A. A.↗
NASA NTRS1970

Voltage regulator with multiple parallel power source sections

Voltage regulator provides improved voltage-regulating system in which power dissipation and consequent heat generation are minimized. Each power source section is controlled sequentially so that only one operates in a linear range at a time.

Binckley, W. G.↗
NASA NTRS1973

Development of a high speed parallel hybrid boost bearing

The analysis, design, and testing of the hybrid boost bearing are discussed. The hybrid boost bearing consists of a fluid film bearing coupled in parallel with a rolling element bearing. This coupling arrangement makes use of the inherent advantages of both the fluid film and rolling element bearing and at the same time minimizes their disadvantages and limitations. The analytical optimization studies that lead to the final fluid film bearing design are reported. The bearing consisted of a centrifugally-pressurized planar fluid film thrust bearing with oil feed through the shaft center. An analysis of the test ball bearing is also presented. The experimental determination of the hybrid bearing characteristics obtained on the basis of individual bearing component tests and a combined hybrid bearing assembly is discussed and compared to the analytically determined performance characteristics.

Winn, L. W.↗
NASA NTRS1972

Spectral-line structures of saturated parametric instabilities.

The nonlinear saturation spectrum of parametric instabilities is shown to be restricted to discrete values of the propagation vector if spontaneous emission is neglected and a one-dimensional analysis is used. The purely growing instability is not excited for equal ion and electron temperatures if the power is less than 3.5 times the threshold power. The inadequacy of the present one-dimensional treatment is pointed out, and it is shown that waves with propagation vectors that are not parallel to the pump field must be present even if spontaneous emission is neglected.

Kuo, Y.-Y.↗
NASA NTRS1973

The Space Shuttle Main Engine

A reusable high-performance rocket engine intended for putting the Space Shuttle orbiter vehicle into earth orbit is described. Three such engines are clustered in the aft end of the orbiter stage. They burn in parallel with the solid-propellant boosters during the initial ascent phase and continue to burn after booster ejection until just prior to orbit insertion. The nominal burn time is roughly 10 min. Propulsion requirements demand maximum performance from liquid oxygen/hydrogen propellants with a minimum hardware weight. The engine design and the present progress made in the development of the engine are discussed.

Castenholz, P. D.↗
NASA NTRS1984

Ancient Volcano-Tectonic Structures of the Olympus Mons Region, Mars

Two old volcano-tectonic collapse structures are exposed north and northeast of the huge shield volcano, Olympus Mons. They are semicircular and were probably low shield volcanoes similar to Alba Patera, but whose central portions have subsided or collapsed. They form the basement upon which younger volcanic materials of Alba Patera Olympus Mons have been emplaced. The oldest structure, Acheron Fossae is over 700 km across and is north of Olympus Mons. It has a surface of considerable relief broken by graben and extensive en echelon and parallel fractures and faults with varied displacements. Acheron Fossae is the most densely cratered in the Olympus Mons region. The structure must have formed very early in martian time. The second is Halex Fossae, northeast of Olympus Mons. Where exposed, it is cut by a series of arcuate grabens that become closer spaced toward its center. The radii of the fractures indicate that the structure may be at least 250 km across and centered beneath the Olympus Plains. Lava flows appear to have issued from some of the arcuate fractures and to have flowed radially away from the center of Halex Fossae. North of Halex Fossae, material of the same age as Halex Fossae overlaps Acheron Fossae. The density of craters on the Halex Fossae material (3,200-4,400 >1km/10 6 km 2 indicates an old age for its formation but one younger than that of Acheron Fossae. These two ancient volcanic-tectonic structures are evidence that the Olympus Mons region has been the locus of major volcanism over much of martian history.

Elliot C Morris↗
NASA NTRS1986

A high-order language for a system of closely coupled processing elements

The research reported in this paper was occasioned by the requirements on part of the Real-Time Digital Simulator (RTDS) project under way at NASA Lewis Research Center. The RTDS simulation scheme employs a network of CPUs running lock-step cycles in the parallel computations of jet airplane simulations. Their need for a high order language (HOL) that would allow non-experts to write simulation applications and that could be implemented on a possibly varying network can best be fulfilled by using the programming language Ada. We describe how the simulation problems can be modeled in Ada, how to map a single, multi-processing Ada program into code for individual processors, regardless of network reconfiguration, and why some Ada language features are particulary well-suited to network simulations.

Feyock, S.↗
NASA NTRS1989

Critical currents of aligned grains of Tl-Ba-Ca-Cu-O compounds

A study of irreversibility in the magnetization curves of Tl2Ba2Ca2Cu3O10 and Tl2Ba2Ca1Cu2O8 was undertaken to determine the intragranular critical currents and the effects of flux-creep in grain-aligned samples of these materials. For fields of greater than 0.3 T, and H parallel to c axis, the critical supercurrent falls approximately exponentially with both magnetic field and temperature. Flux-creep is found to be linear in the logarithm of time at low fields over a wide temperature range.

Fang, M. M.↗
NASA NTRS1989

The PARTY parallel runtime system

In the present automated system for the organization of the data and computational operations entailed by parallel problems, in ways that optimize multiprocessor performance, general heuristics for partitioning program data and control are implemented by capturing and manipulating representations of a computation at run time. These heuristics are directed toward the dynamic identification and allocation of concurrent work in computations with irregular computational patterns. An optimized static-workload partitioning is computed for such repetitive-computation pattern problems as the iterative ones employed in scientific computation.

Saltz, J. H.↗