Search NASA⌕ Search

SEARCH · Search NASA

Results for “University Programs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

sCO2 Primary Power Large-Scale Pilot Plant FEED Summary

Echogen Power Systems and its project partners the Electric Power Research Institute, CDM Smith, Riley Power Inc. (a Babcock Power Inc. company), and the University of Missouri completed the Front-End Engineering Design (FEED) study of a nominal 10 MWe supercritical carbon dioxide (sCO2) large-scale pilot plant based on Recompression Brayton Cycle (RCBC) architecture. The FEED study was completed under Phase II of the U.S. Department of Energy Fossil Fuel Large-Scale Pilots program. The FEED study scope included the preliminary design of the combustion and environmental control systems, the primary heater, the sCO2 power cycle and its associated turbomachinery, and the balance of plant equipment to determine accurate cost and schedule requirements for fabrication and installation of the system at the University of Missouri’s Combined Cooling, Heat, and Power Plant, located in Columbia, Missouri. The RCBC sCO2 cycle presents superior thermodynamic efficiency compared to steam-Rankine cycles and is adaptable to a broad range of heat sources. The risk aversion of the power generation industry requires a successful large-scale pilot plant demonstration to enable financing and deployment of commercial-scale plants. Therefore, successful construction and demonstration of a 10 MWe RCBC sCO2 power plant would empower a transformational step forward for the efficiency of the next generation of utility power plants. This paper provides details on the primary heater, environmental control systems, and sCO2 power cycle design and performance.

01 COAL, LIGNITE, AND PEAT↗

Indiana: Indiana's Clean Energy Resources and Economy [Brochure]

Strong in clean energy manufacturing, renewables, and efficiency technologies, Indiana ranks in the top third of states in wind energy potential, with a capacity of more than 148,227 megawatts—enough to generate more than four times the state’s current electricity consumption. The four utility-scale wind power plants currently operating in Indiana generate more than 1,000 megawatts—up from virtually zero in 2005. Several dozen Indiana companies produce components, tools, or materials for the wind energy industry. Indiana’s automotive manufacturing industry employed more than 84,000 people and produced more than $\$$8 billion worth of goods in 2010. Several of Indiana’s auto and auto part manufacturers have entered or are preparing to enter the growing clean transportation sector. Indiana is one of 20 states with a binding energy savings target. The annual savings target starts at 0.3% in 2010 and will ramp up to 2% in 2019. By 2019, this effort is expected to save more than 2.3 million megawatt hours—$\$$177 million worth of electricity—per year statewide. Indiana utility companies also sponsor 43 rebate programs for energy efficiency and renewable energy, as well as a loan program for residential energy efficiency improvements.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Energy-Efficient Maneuvering of Connected and Automated Vehicles (CAVs) with Situational Awareness at Intersections (Final Progress Report)

The increased development of Connected and Automated Vehicle (CAV) systems, currently used for safety and driver convenience, presents new opportunities to improve the energy efficiency of vehicles. Southwest Research Institute (SwRI) achieved a 20% energy consumption reduction in a 2017 Toyota Prius Prime plug-in hybrid by using connectivity (V2V, V2I, V2X) as part of the Next Generation Energy Technologies for Connected and Automated on-Road Vehicles (NEXTCAR) program. The energy consumption gains were achieved by a combination of vehicle dynamics and powertrain control algorithms with a focus on SAE L1 and L2 automated vehicles where a human is still responsible for safe operation. SwRI is now involved in NEXTCAR-II, focusing on energy-efficient control tech for SAE Level 4/5 automated vehicles, aiming for a 30% energy reduction compared to stock hybrids. The rise of Mobility as a Service (MaaS) is driving investments in L4 and L5 automated vehicles. A study by the University of Michigan shows these vehicles might increase energy use and emissions by 3-20%. Technology similar to NEXTCAR can enhance energy efficiency in highly automated vehicles, leveraging improved sensing and actuation capabilities. While the NEXTCAR programs targeted energy efficiency improvements for a single vehicle, this program adopts a more expansive approach. It places its focus on understanding and testing the cumulative effects within a region or corridor, aiming to assess how a subset of vehicles equipped with NEXTCAR-style technologies influence the overall energy consumption of all vehicles traveling within that area. Additionally, the program explores infrastructure-based mobility solutions to optimize efficiency, and seeks to understand and quantify public perception and likelihood of technology adoption.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Multi-Timescale Three-Phase Unbalanced Distribution System Operation With Variable Renewable Generations

This paper proposes a multi-timescale operational approach for a three-phase unbalanced distribution system, which contains hourly scheduling at substation level and minutes power flow operation at feeder level. In the substation scheduling model, the objective is to minimize the system cost with variable renewable generations. The given error distribution model of renewable generation is formulated as a chance constraint, and derived into a deterministic form by Gaussian mixture model (GMM) with genetic algorithm-based expectation-maximization (GAEM). In the feeder scheduling model, the system cost is further reduced with the optimal power flow (OPF) at a timescale of minutes. Considering the nonconvexity of the three-phase unbalanced OPF problem in distribution systems, the semidefinite programming (SDP) is used to relax the problem into a convex problem, and a distributed computation approach is built based on alternating direction method of multiplier (ADMM). The IEEE 123-bus distribution system, DU (University of Denver) campus distribution system, and the IEEE 8500-bus distribution system are used as the test bench for the proposed approach. And the numerical results demonstrate the effectiveness and validity of the proposed method.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Glass Furnace Model (GFM) development and technology transfer program final report.

A Glass Furnace Model (GFM) was developed under a cost-shared R&D program by the U.S. Department of Energy's Argonne National Laboratory in close collaboration with a consortium of five glass industry members: Techneglas, Inc., Owens-Corning, Libbey, Inc., Osram Sylvania, Inc., and Visteon, Inc. Purdue University and Mississippi State University's DIAL Laboratory were also collaborators in the consortium. The GFM glass furnace simulation model that was developed is a tool industry can use to help define and evaluate furnace design changes and operating strategies to: (1) reduce energy use per unit of production; (2) solve problems related to production and glass quality by defining optimal operating windows to reduce cullet generation due to rejects and maximize throughput; and (3) make changes in furnace design and/or operation to reduce critical emissions, such as NO{sub x} and particulates. A two-part program was pursued to develop and validate the furnace model. The focus of the Part I program was to develop a fully coupled furnace model which had the requisite basic capabilities for furnace simulation. The principal outcome from the Phase I program was a furnace simulation model, GFM 2.0, which was copyrighted. The basic capabilities of GFM 2.0 were: (1) built-in burner models that can be included in the combustion space simulation; (2) a participating media spectral radiation model that maintains local and global energy balances throughout the furnace volume; and (3) a multiphase (liquid, solid) melt model that calculates (does not impose) the batch-melting rate and the batch length. The key objectives of the Part II program, which overlapped the Part I program were: (1) to incorporate a full multiphase flow analytical capability with reduced glass chemistry models in the glass melt model and thus be able to compute and track key solid, gas, and liquid species through the melt and the combustion space above; and (2) to incorporate glass quality indices into the simulation to facilitate optimization studies with regard to productivity, energy use and emissions. Midway through the Part II program, however, at the urging of the industrial consortium members, the decision was made to refocus limited resources on transfer of the existing GFM 2.0 software to the industry to speed up commercialization of the technology. This decision, in turn, necessitated a de-emphasis of the development of the planned final version of the GFM software that had full multiphase capability, GFM 3.0. As a result, version 3.0 was not completed; considerable progress, however, was made before the effort was terminated. The objectives of the Technology Transfer program were to transfer the Glass Furnace Model (GFM) to the glass industry and to promote its widespread use by providing the requisite technical support to allow effective use of the software. GFM Version 2.0 was offered at no cost on a trial, six-month basis to expedite its introduction to and use by the industry. The trial licenses were issued to generate a much more thorough user beta test of the software than the relatively small amount completed by the consortium members prior to the release of version 2.0.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Exploiting the Spinel Structure for Li-ion Battery Applications: A Tribute to John B. Goodenough

This review provides a personal account of career-long efforts, interwoven with the contributions of others, to exploit the [B 2 ]O 4 framework of an A[B 2 ]O 4 spinel structure for lithium-ion battery applications, where A = Li, and B is one or more metal cations. The narrative begins at the Council for Scientific and Industrial Research (CSIR) in South Africa in the mid-1970s when, in response to the Middle East oil crisis, worldwide efforts were turned to develop high-temperature sodium and lithium batteries to power electric vehicles. In 1981, results in CSIR's program on a high-temperature lithium battery led to a collaborative project on room-temperature lithium cells with Prof. John B. Goodenough at Oxford University, where studies of Fe 3 O 4 , Mn 3 O 4 , and LiMn 2 O 4 cathodes led to the recognition of the broad utility of the [B2]O4 spinel framework as an anode, cathode, or solid electrolyte for rechargeable lithium cells. This finding has had a profound and lasting impact, influencing further ideas and discoveries at the CSIR, Argonne National Laboratory, and elsewhere. The narrative emphasizes the compositional versatility of the spinel structure and the opportunities to tailor the electrochemical potential and stability of a Li-ion cell.

25 ENERGY STORAGE↗

New prospects for PV powered water desalination plants: case studies in Saudi Arabia: New prospects for PV powered water desalination plants

Increased water demand and increased drought episodes in the Middle East and other regions necessitate an expansion in desalination projects and create a great market opportunity for photovoltaics (PV). PV-powered desalination has previously been regarded as not being a cost-competitive solution when compared with conventionally powered desalination; however, the decline in PV costs over the last few years has changed this outlook. Here, this article presents up-to-date performance and cost analysis of reverse osmosis (RO) desalination powered with PV connected to the Saudi Arabian grid. Reference cases include relatively small (i.e., producing 6550 m 3 water per day) and large (i.e., 190 000 m 3 /day) desalination plants using seawater at a salinity of 40 000 ppm. We used data from a King Abdullah University for Science and Technology presentation and Hybrid Optimization Model for Electric Renewables 2.81 Energy Modeling Software (HOMER Energy LLC) in tandem with Desalination Economic Evaluation Program 4.0 (International Atomic Energy Agency) desalination software to analyze the techno-economic feasibility of these plants. The first phase of our work entailed a comparison between dual-axis high concentration PV (CPV) equipped with triple junction III/V solar cells and CdTe PV-powered RO systems. The estimated levelized cost of electricity from CPV is 0.16/kWh dollars, whereas that from CdTe PV is $0.10/kWh dollars and 0.09/kWh dollars for fixed-tilt and one-axis tracking systems, respectively. These costs are higher than the price of diesel-based grid electricity in the region because diesel fuel is heavily subsidized in Saudi Arabia.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Cosmology meets cohomology

The cosmological polytope and bootstrap programs have revealed interesting connections between positive geometries, modern on-shell methods and bootstrap principles studied in the amplitudes community with the wavefunction of the Universe in toy models of FRW cosmologies. To compute these FRW correlators, one often faces integrals that are too difficult to evaluate by direct integration. Borrowing from the Feynman integral community, the method of (canonical) differential equations provides an efficient alternative for evaluating these integrals. Moreover, we further develop our geometric understanding of these integrals by describing the associated relative twisted cohomology. Leveraging recent progress in our understanding of relative twisted cohomology in the Feynman integral community, we give an algorithm to predict the basis size and simplify the computation of the differential equations satisfied by FRW correlators.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A Decomposition-Based Learn-To-Optimize Approach with Feasibility Layer Assistance for Sub-Hourly Unit Commitment

Sub-hourly unit commitment (UC) with 15-min intervals is gaining significant attention as a way to respond rapidly to the fluctuations in electricity supply and demand introduced by renewable resources. However, the increased temporal resolution and complex inter-temporal dependencies pose substantial computational challenges for traditional optimization methods. To this end, this paper explores a decomposition-based learn-to-optimize approach. Building on recent advances in machine learning, our method revisits the long- overlooked Lagrangian relaxation framework, which is a classical decomposition technique that enables tractable subproblem solving. These smaller subproblems are inherently well-suited for machine learning, as their reduced dimensionality and structural regularity allow predictive models to efficiently learn and generalize solution patterns. We thus propose a generic predictive model, which embeds Gated Recurrent Units (GRUs) and Attention in the encoder-decoder structure, and integrate a rule-based feasibility layer to capture temporal dependencies, reduce training effort, and improve feasibility w.r.t. unit-level constraints. Our method has been validated on the IEEE 118-bus system, demonstrating promising performance in solving sub-hourly UC problems efficiently and feasibly.

97 MATHEMATICS AND COMPUTING↗

Relationship between student selection criteria and learner success for medical dosimetry students

Medical dosimetry education occupies a specialized branch of allied health higher education. Noted international shortages of health care workers, reduced university funding, limitations on faculty staffing, trends in learner attrition, and increased enrollment of nontraditional students force medical dosimetry educational leadership to reevaluate current admission practices. Program officials wish to select medical dosimetry students with the best chances of successful graduation. The purpose of the quantitative ex post facto correlation study was to investigate the relationship between applicant characteristics (cumulative undergraduate grade point average (GPA), science grade point average (SGPA), prior experience as a radiation therapist, and previous academic degrees) and the successful completion of a medical dosimetry program, as measured by graduation. A key finding from the quantitative study was the statistically significant positive correlation between a student's previous degree and his or her successful graduation from the medical dosimetry program. Future research investigations could include a larger research sample, representative of more medical dosimetry student populations, and additional studies concerning the relationship of previous work as a radiation therapist and the effect on success as a medical dosimetry student. Based on the quantitative correlation analysis, medical dosimetry leadership on admissions committees could revise student selection rubrics to place less emphasis on an applicant's undergraduate cumulative GPA and increase the weight assigned to previous degrees.

61 RADIATION PROTECTION AND DOSIMETRY↗

European MSc Programs in Nuclear Sciences - To meet the Need of Stakeholders

A stakeholder needs assessment, carried out under the EU-EURAC and EU-ENEN II projects, clearly showed that, at the European level, there are a significant and constant need for post-graduates with skills in radiochemistry, radioecology, radiation dosimetry and environmental modelling and a smaller, but still important, demand for radiobiologists and bio-modellers. Most of these needs are from government organizations. If only the nuclear industry is considered, then the largest demand is for radiochemists and radiation protection dosimetrists. Given this spectrum of need and existing capacity in the areas of radiobiology it was concluded that the needs identified would be most efficiently met by three new degree programs: European MSc Radiation Protection European MSc Analytical Radiochemistry European MSc Radioecology. All three master programs would be developed using the framework provided by the Bologna Convention and the lecturing could be shared among specialist Scientists within a network of collaborating universities. Therefore, educational plans have been developed for the above MSc degrees. These plans envisage each degree comprising three modules that are common to all the degrees (3x10 ECTS credits), three specialist modules (3x10 ECTS credits) and a research project (1x60 ECTS credits). The courses should be aimed, not only to fill the identified European postgraduate education gap in radiological sciences, but also to provide a modular structure that is easily accessed by stakeholders for CPD training. It is anticipated that the European Masters will meet the academic training requirements of qualified 'experts', as defined by the European Commission and the IAEA. At the Norwegian University of Life Sciences (UMB) a pilot MSc in Radioecology has successfully been initiated in collaboration with UK and France.

99 GENERAL AND MISCELLANEOUS↗

A SPECTROSCOPICALLY CONFIRMED EXCESS OF 24 mum SOURCES IN A SUPER GALAXY GROUP AT z = 0.37: ENHANCED DUSTY STAR FORMATION RELATIVE TO THE CLUSTER AND FIELD ENVIRONMENT

To trace how dust-obscured star formation varies with environment, we compare the fraction of 24 mum sources in a super galaxy group to the field and a rich galaxy cluster at z approx 0.35. We draw on multi-wavelength observations{sup 9}Based on observations made with (1) The ESO telescopes at Paranal Observatories under program IDs 072.A-0367, 076.B-0362, 078.B-0409; (2) the NASA/ESA Hubble Space Telescope (GO-10499); STScI is operated by the association of Universities for Research in Astronomy, Inc. under the NASA contract NAS 5-26555; (3) the Spitzer Space Telescope, which is operated by the Jet Propulsion Laboratory, California Institute of Technology under a contract with NASA; support for this work was provided by NASA through an award issued by JPL/Caltech (GO-20683); (4) the Chandra X-ray Observatory Center, which is operated by the Smithsonian Astrophysical Observatory for and on behalf of the National Aeronautics Space Administration under contract NAS8-03060; and (5) the Magellan 6.5 m telescope operated by OCIW. that combine Hubble, Chandra, and Spitzer imaging with extensive optical spectroscopy (>1800 redshifts) to isolate galaxies in each environment and thus ensure a uniform analysis. We focus on the four galaxy groups (sigma{sub 1D} = 303-580 km s{sup -1}) in supergroup 1120-12 that will merge to form a galaxy cluster comparable in mass to Coma. We find that (1) the fraction of supergroup galaxies with SFR{sub IR} >= 3 M {sub sun} yr{sup -1} is 4 times higher than in the cluster (32% +- 5% versus 7% +- 2%); (2) the supergroup's infrared luminosity function confirms that it has a higher density of IR members compared to the cluster and includes bright IR sources (log(L {sub IR})[erg s{sup -1}] >45) not found in galaxy clusters at z approx< 0.35; and (3) there is a strong trend of decreasing 24 mum fraction with increasing galaxy density, i.e., an infrared-density relation, not observed in the cluster. These dramatic differences are surprising because the early-type fraction in the supergroup is already as high as in clusters, i.e., the timescales for morphological transformation cannot be strongly coupled to when the star formation is completely quenched. The supergroup has a significant fraction (approx17%) of luminous, low-mass (10.0 < log(M {sub *})[M {sub sun}] < 10.6), SFR{sub IR} >= 3 M {sub sun} yr{sup -1} members that are outside the group cores (R {sub proj} >= 0.5 Mpc); once their star formation is quenched, most will evolve into faint red galaxies. Our analysis indicates that the supergroup's 24 mum population also differs from that in the field: (1) despite the supergroup having twice the fraction of E/S0s as the field, the fraction of SFR{sub IR} >= 3 M {sub sun} yr{sup -1} galaxies is comparable in both environments, and (2) the supergroup's IR luminosity function has a higher L*{sub IR} than that previously measured for the field.

79 ASTRONOMY AND ASTROPHYSICS↗

Crosscutting Technology Development at the Center for Advanced Separation Technologies

The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium -- Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno - that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/biological extraction; (4) Modeling and control; and (5) Environmental control. Distribution of funds is handled via competitive solicitation of research proposals through Site Coordinators at the seven member universities. These were first reviewed and ranked by a group of technical reviewers (selected primarily from industry). Based on these reviews, and an assessment of overall program requirements, the CAST Technical Committee made an initial selection/ranking of proposals and forwarded these to the DOE/NETL Project Officer for final review and approval. The successful projects are listed by category, along with brief abstracts of their aims and objectives.

01 COAL, LIGNITE, AND PEAT↗

Theoretical and Computational Modeling of Magnetically Ordered Molecules & Electronic Nano-Transport of Spins: State of Art and Unanswered Questions : Workshop

As a culmination of a five-year Nordforsk Network project entitled “Nanospintronics: Theory and Simulations”, Professor Carlo Canali (Linneaus University, Sweden) and members of the network, and Vincenza Benza (Local Organizer Milan) organized a summer workshop in conjunction with the A. Volta Scientific Cultural Exchange program. This workshop took place 24-30 August 2013. Several Basic Energy Scientists from the US conducted lectures and also provided hands-on tutorials to developing materials and chemicals scientists. We have received a total of $10,000 of support to offset the travel expenses of US-based participants for this workshop.

36 MATERIALS SCIENCE↗

Online Monitoring of Concrete Structures in Nuclear Power Plants: Interim Report

The existing fleet of nuclear power plants in the United States have initial operating licenses of 40 years, and many of these plants have applied for and received license extensions. As plant structures, systems, and components age, their useful life—considering both structural integrity and performance—is reduced as a result of deterioration of the materials. Assessment and management of aging concrete structures in nuclear plants require a more systematic approach than simple reliance on existing code-based design margins of safety. Structural health monitoring is required to produce actionable information regarding structural integrity that supports operational and maintenance decisions. The online monitoring of concrete structures project conducted under the Advanced Instrumentation, Information, and Control Technologies Pathway of the Light Water Reactor Sustainability program at Idaho National Laboratory is seeking to develop and demonstrate capabilities for concrete structures health monitoring. Through this research project, several national laboratories and Vanderbilt University propose to develop a framework of research activities for the health monitoring of nuclear power plant concrete structures that includes the integration of four elements—damage modeling, monitoring, data analytics, and uncertainty quantification. This report briefly discusses activities in this project during October-December, 2014. The most significant activity during this period was the organizing of a two-day workshop on research needs in online monitoring of concrete structures, hosted by Vanderbilt University in November 2014. Thirty invitees from academia, industry and government participated in the workshop. The presentations and discussions at the workshop surveyed current activities related to concrete structures deterioration modeling and monitoring, and identified the challenges, knowledge gaps, and opportunities for advancing the state of the art; these discussions are summarized in this report

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Collaborative Research: Louis Stokes Regional Center of Excellence: Louis Stokes Midwest Regional Center of Excellence (LSMRCE) for Broadening Participation in STEM

The Louis Stokes Midwest Regional Center of Excellence (LSMRCE) for Broadening Participation in STEM, a partnership of Chicago State University (CSU), aimed to increase the number of underrepresented minority (URM) students graduating with science, technology, engineering, and math (STEM) degrees and matriculating into graduate STEM programs. As a member institution of the LSMRCE, Fermi Research Alliance, LLC, (Fermilab) looked to support its continued mission of increasing URM student participation in its Summer Internship in Science and Technology (SIST) internship program. The program provided URMs with access to research skills development, mentoring and professionalization activities via paid, summer research internships at Fermilab. Students received instruction and mentoring while gaining exposure to a global laboratory workforce and community with diverse academic and professional expertise. In addition, students established professional relationships and networked with senior researchers, early career scientists, technical professionals, post-docs and other undergraduate interns to help forge collaboration, innovation and mentoring opportunities at Fermilab and LSMRCE partner institutions

99 GENERAL AND MISCELLANEOUS↗

Magnetotelluric data from Gabbs Valley, Nevada, 2017

This dataset consists of 24 magnetotelluric (MT) stations collected in 2017 in Gabbs Valley, Nevada. The U.S. Geological Survey acquired these data as part of Phase 2 of the Nevada Play Fairway Analysis Project led by the University of Nevada at Reno and funded by the Department of Energy (grant number DE-EE0006731) with support from the U.S. Geological Survey's Energy Program.

15 GEOTHERMAL ENERGY↗

Coordinating Space Nuclear Research Advancement and Education

The advancement of space exploration using nuclear science and technology has been a goal sought by many individuals over the years. The quest to enable space nuclear applications has experienced many challenges such as funding restrictions; lack of political, corporate, or public support; and limitations in educational opportunities. The Center for Space Nuclear Research (CSNR) was established at the Idaho National Laboratory (INL) with the mission to address the numerous challenges and opportunities relevant to the promotion of space nuclear research and education.1 The CSNR is operated by the Universities Space Research Association and its activities are overseen by a Science Council comprised of various representatives from academic and professional entities with space nuclear experience. Program participants in the CSNR include academic researchers and students, government representatives, and representatives from industrial and corporate entities. Space nuclear educational opportunities have traditionally been limited to various sponsored research projects through government agencies or industrial partners, and dedicated research centers. Centralized research opportunities are vital to the growth and development of space nuclear advancement. Coordinated and focused research plays a key role in developing the future leaders in the space nuclear field. The CSNR strives to synchronize research efforts and provide means to train and educate students with skills to help them excel as leaders.

99 GENERAL AND MISCELLANEOUS↗