Search NASA⌕ Search

SEARCH · Search NASA

Results for “X ray diffraction analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Direct processing of PbZr 0.53 Ti 0.47 O 3 films on glass and polymeric substrates

This work reports on direct crystallization of PbZr 0.53 Ti 0.47 O 3 (PZT) thin films on glass and polymeric substrates, using pulsed thermal processing (PTP). Specifically, xenon flash lamps deliver pulses of high intensity, short duration, broadband light to the surface of a chemical solution deposited thin film, resulting in the crystallization of the film. Structural analysis by X-ray diffraction (XRD) and transmission electron microscopy show the existence of perovskite structure in nano-sized grains (≤5 nm). Local functional analysis by band excitation piezoelectric spectroscopy and electrostatic force microscopy confirm the presence of a ferroelectric phase and retention of voltage-written polarization for multiple days. Based on structural and functional analyses, strategies are discussed for optimization of pulse voltage and duration for the realization of crystalline ferroelectric thin films. For ~200 nm-thick PZT films on glass substrates, 500 μs-long pulses were required for crystallization, starting with 100 pulses at 350 V, 10 or 25 pulses at 400 V and in general lower number of pulses at higher voltages (resulting in higher radiant energy). Overall power densities of >6.4 kW/cm 2 were needed for appearance of peaks corresponding to the perovskite phase in the XRD. Films on glass processed at 350–400 V had a higher degree of 111-oriented perovskite grains. Higher applied radiant energy (through increased pulse voltage or count) resulted in more random and/or partially 001-oriented films. For ~1 μm-thick PZT films on polymeric substrates, 10 to 25 250 μs-long pulses at voltages ranging between 200 to 250 V, corresponding to power densities of ~2.8 kW/cm 2 , were optimal for maximized perovskite phase crystallization, while avoiding substrate damage.

36 MATERIALS SCIENCE↗

Kinetics of Pyrolysis and Thermal Evolution of Negev Desert Lithologies

The Negev desert in Israel is home to large quantities of organic-rich, shallow marine sedimentary lithologies that could potentially accommodate the disposal of spent nuclear fuel. Previous thermal analyses of Negev carbonates have focused on industrially relevant considerations such as natural gas and oil extraction or pyrolysis for recovering hydrocarbon fuels. Here, this study addresses thermal evolution of the Negev organic-rich carbonate, siliceous, and phosphorite rocks and associated chemical, mineralogical, and microstructural changes that may occur under prolonged thermal loading in the vicinity of spent nuclear fuel disposal systems. Our employed methods include high-temperature X-ray diffraction, high-temperature infrared spectroscopy, and thermal analysis integrating thermogravimetry, differential scanning calorimetry, and mass spectrometry. Further, we apply iterative iso-conversional model-free methods to derive kinetic parameters for thermal decomposition of the Negev organic-rich carbonate rocks from 200 to 550 °C. Our results have provided mechanistic insights into the thermal evolution encompassing water desorption, decomposition of organic matter, and decarbonation of carbonate phases.

58 GEOSCIENCES↗

Metal-organic and supramolecular networks driven by 5-chloronicotinic acid: Hydrothermal self-assembly synthesis, structural diversity, luminescent and magnetic properties

Four new crystalline solids, namely [Co{sub 2}(µ{sub 2}-5-Clnic){sub 2}(µ{sub 3}-5-Clnic){sub 2}(µ{sub 2}-H{sub 2}O)]{sub n} (1), [Co(5-Clnic){sub 2}(H{sub 2}O){sub 4}]·2(5-ClnicH) (2), [Pb(µ{sub 2}-5-Clnic){sub 2}(phen)]{sub n} (3), and [Cd(5-Clnic){sub 2}(phen){sub 2}]·3H{sub 2}O (4) were generated by hydrothermal self-assembly methods from the corresponding metal(II) chlorides, 5-chloronicotinic acid (5-ClnicH) as a principal building block, and 1,10-phenanthroline (phen) as an ancillary ligand (optional). All the products 1–4 were characterized by IR spectroscopy, elemental analysis, thermogravimetric (TGA), powder X-ray diffraction (PXRD) and single-crystal X-ray diffraction. Their structures range from an intricate 3D metal-organic network 1 with the 3,6T7 topology to a ladder-like 1D coordination polymer 3 with the 2C1 topology, whereas compounds 2 and 4 are the discrete 0D monomers. The structures of 2 and 4 are further extended (0D→2D or 0D→3D) by hydrogen bonds, generating supramolecular networks with the 3,8L18 and ins topologies, respectively. Synthetic aspects, structural features, thermal stability, magnetic (for 1) and luminescent (for 3 and 4) properties were also investigated and discussed. - Graphical abstract: A new series of crystalline solids was self-assembled and fully characterized; their structural, topological, luminescent and magnetic features were investigated. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Martensite crystal structure in Ru-based high temperature shape memory alloys

Highlights: • A three level twinned microstructure is recognized in the β″ phase. • Wavy contrast boundaries which are typical for translation interfaces • Displacements are translations of tetragonal β′ phase, lost during transformation. • Six times bigger monoclinic cell is characterized by the disappearance of 5 translations. - Abstract: High temperature shape memory alloys RuNb and RuTa were investigated by X-ray diffraction in order to determine the structure of the low temperature β” martensite. Powder X-ray diffraction and Rietveld analysis confirm the monoclinic symmetry and allow a precise determination of the atom positions. The low temperature microstructure is the result of a martensitic transformation from a tetragonal β′ martensite. The analysis of how it is controlled by the space groups of the two phases and by their relative orientation is performed by transmission electron microscopy. A three level twinned microstructure is recognized in the β” phase. The investigation at the smallest scale twins reveals the presence of wavy contrast boundaries which are typical for translation interfaces. High resolution transmission electron microscopy images, accompanied by phase contrast imaging analysis, have been used to determine the translation vectors associated to the interfaces. These displacements are the translations of the tetragonal β′ phase which are lost during the transformation. The combination of X-ray diffraction and transmission electron microscopy investigation allows the suggestion of a global distortion mechanism that explains the atomic displacements in the β” form.

36 MATERIALS SCIENCE↗

Enhancing photovoltaic performance of dye-sensitized solar cells by rare-earth doped oxide of SrAl{sub 2}O{sub 4}:Eu{sup 3+}

Graphical abstract: Current–voltage characteristics of DSSCs based on the photoanodes doping different SrAl{sub 2}O{sub 4}:Eu{sup 3+} and doping 3% SrAl{sub 2}O{sub 4}. - Highlights: • A down-conversion (DC) nanocrystal (SrAl{sub 2}O{sub 4}:Eu{sup 3+}) was synthesized. • The effect of SrAl{sub 2}O{sub 4}:Eu{sup 3+} doped in photoanode in DSSCs was investigated. • SrAl{sub 2}O{sub 4}:Eu{sup 3+} doped in photoanode appeared the better photovoltaic performances. • The dual function of DC and p-type doping effect were explained. - Abstract: SrAl{sub 2}O{sub 4}:Eu{sup 3+} down-conversion (DC) nanocrystals were synthesized by a sol–gel method and then doped in TiO{sub 2} as a photoanode in dye-sensitized solar cells (DSSCs). Differential thermal analysis, fourier transform infrared spectroscopy, X-ray diffraction and Brunauer–Emmet–Teller analysis confirmed the formation of SrAl{sub 2}O{sub 4}:Eu{sup 3+} nanocrystals with diameters of ∼47 nm, pore size of ∼25 nm, sintering temperature of 1300 °C. The photoluminescence and UV–vis absorption spectra of the SrAl{sub 2}O{sub 4}:Eu{sup 3+} revealed a DC from ultraviolet light to visible light which matched the strong absorbing region of the N719 dye. The photoelectric conversion efficiency of the DSSCs with a TiO{sub 2} photoanode doped with 3 wt% SrAl{sub 2}O{sub 4}:Eu{sup 3+} was 20% higher than that with a pure TiO{sub 2} photoanode. This phenomenon could be mainly explained by SrAl{sub 2}O{sub 4}:Eu{sup 3+} nanocrystals’ ability of DC and increased the short-circuit current density. It could be minorly due to the p-type doping effect and slightly improved the open-circuit voltage.

36 MATERIALS SCIENCE↗

Depicting the roles of CuO secondary phase and heat treatment in driving the magnetic and magnetocaloric features of Pr 2/3 Sr 1/3 MnO 3 manganite

In this work, we report a detailed experimental study regarding the impact of copper oxide (CuO) secondary phase and heat treatments on the structural, magnetic, and magnetocaloric properties of the near-room temperature Pr 2/3 Sr 1/3 MnO 3 (PSMO) magnetic refrigerant. Our investigations are carried out by using structural and microstructural analyses, alongside magnetization measurements. Here, the analysis of X-ray diffraction data of PSMO(95%)-CuO(5%) (PSMO-CuO) samples shows the coexistence of both CuO and PSMO phases. Further, the microstructural analysis of PSMO-CuO reveals that the addition of CuO significantly enhances the grains size. On the other hand, the added secondary phase markedly reduces the Curie temperature (T c ) from 293 K for PSMO to about 273 K for PSMO-CuO composite while increasing the magnetocaloric effect. This decrease in T c is associated with a significant change from 162° to about 156° in the Mn-OII-Mn bond angle respectively. Moreover, performed investigations regarding the role of heat treatments unveil that the observed changes in the structural and magnetic features are mainly driven by the secondary phase that modify grains size and double-exchange interactions in the PSMO compound. Interestingly, our findings demonstrate that the Curie temperature of the PSMO and accordingly its magnetocaloric effect can be tailored by adding small amounts of CuO without need to substitution on cation sites. In the light of obtained results, a multilayered refrigerant composed of PSMO and PSMO-CuO is proposed to cover the magnetic cooling temperature range close to room-temperature. The resulting entropy change remains practically constant between 273 K and 293 K. Such a behavior is highly appreciated from a practical point of view, particularly in cases where the cooling process is carried out by using the AMR and Ericsson cycles.

36 MATERIALS SCIENCE↗

Heterospin biradicals based on new piperidineoxyl-substituted 3,6-di-tert-butyl-o-benzoquinone

A nucleophilic addition reaction of 4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl (OH-TEMPO) to 3,6-di-tert-butyl-o-benzoquinone was used to obtain a new sterically hindered o-benzoquinone (1) containing 2,2,6,6-tetramethylpiperidineoxyl functional group, which was characterized by IR spectroscopy, mass spectrometry, elemental analysis, and X-ray diffraction. A one-electron reduction of 1 with potassium and thallium is an efficient method for the generation of earlier unknown heterospin biradicals 5a and 5b, respectively, containing nitroxide and o-semiquinone radical centers. Analysis of the hyperfine structure of the ESR spectra of biradicals 5a and 5b in solution showed that they belong to the group of heterospin biradicals with strong (J >> a) and fast exchange interaction between the radical centers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of catalyst and solvent on the preparation of silica particles with mesoporous shell

Silica spheres with sub-micrometer sized mesoporous shell structure were prepared. Effect of different catalyst and solvent on the synthesis of silica particles with mesoporous shell is studied. Depending on its constituents the particle properties are changed. The synthesized materials were characterized by different physicochemical methods such as X-ray diffraction, scanning electron micrograph, transmission electron micrograph, thermogravimetry/differential thermal analysis, nitrogen adsorption and Fourier transform infrared spectroscopy. The analysis reveals that the synthesized materials are having mesoporous shell structure. The mesoporosity increases with catalyst size maybe due to incorporation of more octadecyltrimethoxy silane in shell followed by the elimination of organics on calcinations.

36 MATERIALS SCIENCE↗

Effect of growth temperature on the CVD grown Fe filled multi-walled carbon nanotubes using a modified photoresist

Fe filled carbon nanotubes were synthesized by atmospheric pressure chemical vapor deposition using a simple mixture of iron(III) acetylacetonate (Fe(acac){sub 3}) with a conventional photoresist and the effect of growth temperature (550-950 {sup o}C) on Fe filled nanotubes has been studied. Scanning electron microscopy results show that, as the growth temperature increases from 550 to 950 {sup o}C, the average diameter of the nanotubes increases while their number density decreases. High resolution transmission electron microscopy along with energy dispersive X-ray investigation shows that the nanotubes have a multi-walled structure with partial Fe filling for all growth temperatures. The graphitic nature of the nanotubes was observed via X-ray diffraction pattern. Raman analysis demonstrates that the degree of graphitization of the carbon nanotubes depends upon the growth temperature.

36 MATERIALS SCIENCE↗

Examination of CeFe[subscript 4]Sb[subscript 12] upon exposure to air: Is this material appropriate for use in terrestrial, high-temperature thermoelectric devices?

The rare-earth (RE) filled skutterudites (e.g., CeFe{sub 4}Sb{sub 12}) have been proposed for use in the next-generation of high-temperature thermoelectric devices. In this investigation, the influence of air exposure on the stability of CeFe{sub 4}Sb{sub 12} has been studied for temperatures ranging from 300 K to 1073 K. Examination of the material after exposure to air at these temperatures using thermogravimetric analysis, powder X-ray diffraction, and X-ray absorption near-edge spectroscopy has shown that above 573 K, CeFe{sub 4}Sb{sub 12} decomposes and then rapidly oxidizes. This temperature is much lower than the maximum operating temperature proposed for high-temperature thermoelectric devices used to recover the waste heat from vehicle exhaust systems (700-773 K).

36 MATERIALS SCIENCE↗

Oxidation behavior of arc evaporated Al-Cr-Si-N thin films

The impact of Al and Si on the oxidation behavior of Al-Cr-(Si)-N thin films synthesized by arc evaporation of powder metallurgically prepared Al{sub x}Cr{sub 1-x} targets with x = Al/(Al + Cr) of 0.5, 0.6, and 0.7 and (Al{sub 0.5}Cr{sub 0.5}){sub 1-z}Si{sub z} targets with Si contents of z = 0.05, 0.1, and 0.2 in N{sub 2} atmosphere was studied in detail by means of differential scanning calorimetry, thermogravimetric analysis (TGA), x-ray diffraction, and Raman spectroscopy. Dynamical measurements in synthetic air (up to 1440 Degree-Sign C) revealed the highest onset temperature of pronounced oxidation for nitride coatings prepared from the Al{sub 0.4}Cr{sub 0.4}Si{sub 0.2} target. Isothermal TGA at 1100, 1200, 1250, and 1300 Degree-Sign C highlight the pronounced improvement of the oxidation resistance of Al{sub x}Cr{sub 1-x}N coatings by the addition of Si. The results show that Si promotes the formation of a dense coating morphology as well as a dense oxide scale when exposed to air.

36 MATERIALS SCIENCE↗

Synthesis and characterization of ester and amide derivatives of titanium(IV) carboxymethylphosphonate

A set of layered ester and amide derivatives of titanium(IV) carboxymethylphosphonate was prepared by solvothermal treatment of amorphous titanium(IV) carboxymethylphosphonate with corresponding 1-alkanols, 1,ω-alkanediols, 1-aminoalkanes, 1,ω-diaminoalkanes and 1,ω-amino alcohols and characterized by powder X-ray diffraction, IR spectroscopy and thermogravimetric analysis. Whereas alkyl chains with one functional group form bilayers tilted to the layers, 1,ω-diaminoalkanes and most of 1,ω-alkanediols form bridges connecting the adjacent layers. In the case of amino alcohols, the alkyl chains form bilayer and either hydroxyl or amino group is used for bonding. This simple method for the synthesis of ester and amide derivatives does not require preparation of acid chloride derivative as a precursor or pre-intercalation with alkylamines and can be used also for the preparation of ester and amide derivatives of titanium carboxyethylphosphonate and zirconium carboxymethylphosphonate. - Graphical abstract: Ester and amide derivatives of layered titanium carboxymethylphosphonate were prepared by solvothermal treatment of amorphous solid with alkanol or alkylamine. - Highlights: • Ester and amide derivatives of titanium carboxymethylphosphonate. • Solvothermal treatment of amorphous solid with alkanol or alkylamine. • Ester and amide formation confirmed by IR spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gas adsorption/separation properties of metal directed self-assembly of two coordination polymers with 5-nitroisophthalate

Two new coordination polymers, namely, [Co(µ-nip)(µ-bpe)]{sub n} (1) and [Zn(µ-nip)(µ-bpe)]{sub n} (2) (nip: 5-nitroisophthalate, bpe: 1,2-bis(4-pyridyl)ethane) were hydrothermally synthesized and structurally characterized by single crystal X-ray diffraction, IR spectroscopy, elemental analysis and thermal analysis. Moreover, atomically detailed simulation studies of complex 2 for CO{sub 2}/CH{sub 4} adsorption and separation were performed. Complex 1 consists of two dimensional (2D) (4,4) grid networks with the point symbol of 4{sup 4}.6{sup 2}. Complex 2 exhibits a 3-fold interpenetrating 3D framework with 6{sup 5}.8-dmp topology. Thermal properties of the complexes showed that both complexes were stable over 320 °C. Simulation studies demonstrated that complex 2 can separate CO{sub 2} from CH{sub 4} at low pressures at 273 K. - Graphical abstract: In this study, two new coordination polymers, namely, [Co(µ-nip)(µ-bpe)]{sub n} (1) and [Zn(µ-nip)(µ-bpe)]{sub n} (2) (nip: 5-nitroisophthalate, bpe: 1,2-bis(4-pyridyl)ethane) were hydrothermally synthesized and structurally characterized by single crystal X-ray diffraction, IR spectroscopy, elemental analysis and thermal analysis. Moreover, atomically detailed simulation studies of complex 2 for CO{sub 2}/CH{sub 4} adsorption and separation were performed. Complex 1 consists of two dimensional (2D) (4,4) grid networks with the point symbol of 4{sup 4}.6{sup 2}. Complex 2 exhibits a 3-fold interpenetrating 3D framework with 6{sup 5}.8-dmp topology. Simulation studies demonstrated that complex 2 can separate CO{sub 2} from CH{sub 4} at low pressures at 273 K. Display Omitted - Highlights: • Two new coordination polymers with 5-nitroisophthalate and 1,2-bis(4-pyridyl)ethane. • Atomically detailed simulation studies of the complexes. • Complex 2 can be proposed as molecular sieve to separate CO{sub 2} from CH{sub 4} at low pressures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sub-micrometer sized yttrium oxide fibers prepared through hydrothermal reaction

Research highlights: {yields} Y{sub 2}O{sub 3} fibers were synthesized by hydrothermal reaction followed by calcination. {yields} Y(OH){sub x}Cl{sub 3-x}.yH{sub 2}O was received from hydrothermal reaction. {yields} Y{sub 2}O{sub 3} fibers showed outstanding high-temperature stability. -- Abstract: Yttrium oxide fibers have been synthesized via hydrothermal reaction and subsequent thermal treatment using yttrium chloride as precursor. The products before and after the thermal treatment were characterized by powder X-ray diffractions (XRD), scanning electron microscopy (SEM), ion-chromatograph analysis, and thermogravimetry and differential thermal analysis (TG-DTA). The fiber diameter ranged from 100 to 300 nm, while the length was up to tens of microns. It was found that the chemical composition and morphology of the products were closely related to the pH value of reaction solution, and fibrous products could be obtained at pH 9.5-10.25. These oxide fibers exhibited outstanding high-temperature stability, which maintained their morphology at temperature up to 1400 {sup o}C.

36 MATERIALS SCIENCE↗

Role of Cations in the Cation-Driven Assembly Process and their Effect on the Charge Storage Properties of Bilayered Vanadium Oxide and Reduced Graphene Oxide Heterostructures in Alkali Ion Systems

Exfoliated δ-Li x V 2 O 5 ·nH 2 O (ex-LVO) and reduced graphene oxide (rGO) heterostructures were constructed using different assembling cations (i.e., Li⁺, Na⁺, and K⁺ ions). The ex-LVO and rGO nanoflakes were stacked together using a concentrated chloride solution of each assembling cation and vacuum annealed at 200 °C to form three distinct two-dimensional (2D) layered architectures. X-ray diffraction and thermogravimetric analysis confirmed that the assembling ions can control the interlayer spacing of the bilayered vanadium oxide (BVO) phase as well as impact the crystallographic water content, which in turn affects the electrochemical performance. Scanning electron microscopy, scanning transmission electron microscopy (STEM), electron energy-loss spectroscopy (EELS), and X-ray photoelectron spectroscopy confirmed that a 2D heterointerface formed between LVO and rGO and that the cations used to assemble the heterostructure are trapped in the interlayer BVO region. High-resolution STEM imaging also showed the rGO dispersion throughout the LVO layers. Moreover, STEM-EELS identified a V 2 O 3 phase that forms along the rGO interface and can stabilize the materials during cycling. A charge storage mechanism analysis, combined with the galvanostatic intermittent titration technique, found that increased interlayer spacings of the BVO phase and using the assembling cations to define intercalation sites for identical charge-carrying ions lead to improved ion diffusion and increased capacities during cycling. Therefore, the Li⁺ and Na⁺ ion assembled heterostructures showed improved charge-carrying ion diffusion and charge storage capacities in each of their respective charge storage systems (i.e., Li-ion and Na-ion half-cells). In total, the cation used for heterostructure assembly can modify the final material structure and tailor the ion diffusion and charge storage capacity to tune its properties for the desired electrochemical system using a variety of 2D materials.

25 ENERGY STORAGE↗

Dual phase polymer gel electrolyte based on non-woven poly(vinylidenefluoride-co-hexafluoropropylene)–layered clay nanocomposite fibrous membranes for lithium ion batteries

Graphical abstract: Display Omitted Highlights: ► P(VdF-co-HFP)–clay nanocomposite based electrospun membranes are prepared. ► The membranes are used as polymer gel electrolyte (PGE) in lithium ion batteries. ► The composite PGE shows ionic conductivity of 5.5 mS cm{sup −1} at room temperature. ► Li/PGE/LiFePO{sub 4} cell delivers initial discharge capacity of 160 mAh g{sup −1}. ► The use of prepared electrolyte significantly improved the cell performance. -- Abstract: A new approach for fabricating polymer gel electrolytes (PGEs) based on electrospun poly(vinylidenefluoride-co-hexafluoropropylene) (P(VdF-co-HFP)) incorporated with layered nanoclay has been employed to enhance the ionic conductivity and electrochemical properties of P(VdF-co-HFP) without compromising its mechanical strength. The effect of layered nanoclay on properties of membranes has been evaluated by X-ray diffraction (XRD), differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). Surface morphology of the membranes has been studied using field-emission scanning electron microscopy (FE-SEM). Polymer gel electrolytes are prepared by soaking the fibrous membrane into 1 M LiPF{sub 6} in EC/DEC. The electrochemical studies show that incorporation of layered nanoclay into the polymer matrix greatly enhanced the ionic conductivity and compatibility with lithium electrodes. The charge–discharge properties and cycling performance of Li/LiFePO{sub 4} cells comprising nanocomposite polymer gel electrolytes have been evaluated at room temperature.

36 MATERIALS SCIENCE↗

Effect of Ag in CdSe thin films prepared using thermal evaporation

It has been a general practice to dope thin films with suitable dopants to modify the properties of the films to make them more suitable for potential applications. When the dopant concentrations are low, they do not normally affect the structure and morphology of the films. However, it may lead to drastic changes in electronic properties of the films. This might result from the dopant getting incorporated into the lattice of the material of the films. Cadmium selenide is an important compound semiconductor material with an attractive energy band gap. The present work relates to an attempt made to dope CdSe thin films with silver. CdSe:Ag (1–5%) thin films were deposited on glass substrates at an optimized substrate temperature of 453 K using thermal evaporation technique. The grown films were analyzed using X-ray diffraction, scanning electron microscopy (SEM), energy dispersive analysis of X-ray (EDX) techniques. It is observed that undoped CdSe thin films and CdSe:Ag films have hexagonal structure. The grain size was found to increase marginally with an increase in the Ag concentration. The optical band gap of the films determined by optical transmission measurements agree with that of CdSe. Electrical conductivity is observed to increase from 10{sup –4} to 3.66 (Ω cm){sup –1} on addition of silver. The variation of resistance with temperature indicates that the prepared films consist of CdSe and Ag existing as two separate phases coexisting and contributing individually to the resistivity of the films.

36 MATERIALS SCIENCE↗

Synthesis of nanocrystalline magnesium titanate by an auto-igniting combustion technique and its structural, spectroscopic and dielectric properties

Nanocrystalline magnesium titanate was synthesized through an auto-ignited combustion method. The phase purity of the powder was examined using X-ray diffraction, thermo gravimetric analysis, differential thermal analysis, Fourier transform infrared spectroscopy and Raman spectroscopy. The transmission electron microscopy study showed that the particle size of the as-prepared powder was in between 20 and 40 nm. The nanopowder could be sintered to 98% of the theoretical density at 1200 {sup o}C for 3 h. The microstructure of the sintered surface was examined using scanning electron microscopy. The dielectric constant ({epsilon}{sub r}) of 16.7 and loss factor (tan {delta}) of the order of 10{sup -4} were obtained at 5 MHz when measured using LCR meter. The quality factor (Q{sub u} x f) 73,700 and temperature coefficient of resonant frequency ({tau}{sub f}) -44.3 ppm/{sup o}C, at 6.5 GHz are the best reported values for sintered pellets obtained from phase pure nanocrystalline MgTiO{sub 3} powder.

36 MATERIALS SCIENCE↗