Search NASA⌕ Search

SEARCH · Search NASA

Results for “analysis codes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

SU-E-T-65: Characterization of a 2D Array for QA and Pretreatment Plan Verification

Purpose: The OCTAVIUS detector729 is a 2D array of 729 air vented cubic plane parallel ion chambers used for pretreatment verification and QA. In this study we investigated dosimetric characteristics of this system for clinical photon beam dosimetry. Methods: Detector performance evaluation included determination of the location of the effective point of measurement (EPM), sensitivity, linearity, and reproducibility of detector response, as well as output factor, dose rate, and source to surface distance (SSD) dependence. Finally, assessment of wedge modulated fields was carried out. All the evaluations were performed five times for low and high photon energies. For reference measurements, a 0.6 cc ionization chamber was used. Data analysis and comparison of the OCTAVIUS detector with reference ion chamber data was performed using the VeriSoft patient plan verification software. Results: The reproducibility and stability of the measurements are excellent, the detector showed same signal with a maximum deviation of less than 0.5% in short and long term. Results of sensitivity test showed same signal with a maximum deviation of approximately 0.1%. As the detector 729 response is linear with dose and dose rate, it can be used for the measurement at regions of high dose gradient effectively. The detector agrees with the ionization chamber measurement to within 1% for SSD range of 75 to 125 cm. Also, its measured wedge modulated profiles matched very well with ion chamber dose profiles acquired in a water tank. Conclusions: As the response of the detector 729 is linear with dose and dose rate, it can be used for the measurements in the areas of dose gradients effectively. Based on the measurements and comparisons performed, this system is a reliable and accurate dosimeter for QA and pretreatment plan verification in radiotherapy.

60 APPLIED LIFE SCIENCES↗

An independent analysis of bias sources and variability in wind plant pre-construction energy yield estimation methods

The wind resource assessment community has long had the goal of reducing the bias between wind plant pre-construction energy yield assessment (EYA) and the observed annual energy production (AEP). This comparison is typically made between the 50% probability of exceedance (P50) value of the EYA and the long-term corrected operational AEP (hereafter OA P50), and is known as the P50 bias. The industry has critically lacked an independent analysis of bias reduction investigated across multiple consultants to identify the greatest sources of uncertainty and variance in the EYA process and the best opportunities for uncertainty reduction. The present study addresses this gap by benchmarking consultant methodologies against each other and against operational data at a scale not seen before in industry collaborations. We consider data from 10 wind plants and evaluate discrepancies between eight consultancies in the steps taken from estimates of gross to net energy. Consultants tend to overestimate the gross energy produced at the turbines and then compensate by further overestimating downstream losses, leading to a mean P50 bias near zero, still with significant variability among the individual wind plants. Within our data sample, we find that consultant estimates of all loss categories, except environmental losses, tend to reduce the project-to-project variability of the P50 bias. The disagreement between consultants, however, remains flat throughout the addition of losses. Finally, we find that differences in consultants’ estimates of project performance can lead to differences up to $10/MWh in the levelized cost of energy for a wind plant.

Todd, Austin C.↗

Uncertainty Underprediction in Monte Carlo Eigenvalue Calculations

It is well-known that statistical estimates obtained from Monte Carlo criticality simulations can be adversely affected by cycle-to-cycle correlations in the fission source, which can lead to estimates of statistical uncertainties that are lower than the true uncertainty by a factor of 5 or more. However, several other more fundamental issues such as adequate source sampling over the fissionable regions and source convergence can have a significant impact on the uncertainties for the calculated eigenvalue and localized tally means, and these issues may be mistaken for effects resulting from cycle-to-cycle correlations. In worst-case scenarios, the uncertainty may be underpredicted by a factor of 40 or more. Since Monte Carlo methods are widely used in criticality safety applications and are increasingly being used for benchmarking reactor analyses, an in-depth understanding of the effects of these issues must be developed in order to support the practical use of Monte Carlo software packages. A rigorous statistical analysis of eigenvalue and localized tally results in Monte Carlo criticality calculations is presented using the SCALE/KENO-VI (continuous-energy version) and MCNP codes. The purpose of this analysis is to investigate the underprediction of uncertainty and its sensitivity to problem characteristics and calculational parameters using two of the most widely used Monte Carlo criticality codes. For the problems considered here, which are fuel rod and fuel assembly problems with reflecting boundary conditions on all four horizontal sides, we show that adequate source convergence along with proper specification of Monte Carlo parameters can reduce the magnitude of uncertainty underprediction to reasonable levels, below a factor of 2 in most cases.

Mervin, Brenden T↗

Evaluating a Historical Airborne Release Test with Modern Modeling Methods

Safety analysts throughout the U.S. Department of Energy (DOE) complex rely on the data provided in the DOE Handbook, DOE-HDBK-3010, to determine source terms that may be incorporated into the document safety analyses. Most often, analysts simply take the bounding values due to time constraints or simply to bound calculations. This is a safe approach that helps avoid regulatory critique; however, it may not provide results that are meaningful or relevant to the conditions being evaluated. The derivation of the data, such as airborne release fractions (ARFs) and respirable fractions (RFs) in the Handbook often depend on very limited table-top and bench/laboratory experiments, as well as engineering judgment which may not be well substantiated, and may not be representative of the actual situation. One historical dataset included a test where a solid contaminant was sprinkled over a liquid gasoline pool and set on fire (also referred to as Mishima and Schwendiman's test later in this paper). The airborne release was measured over the duration of the burn, but then collected separately for a time after the burning was completed. It can be assumed that the collected contaminant in the latter period corresponds to re-suspended particles, whereas the earlier period collected contaminant includes a combination of directly released as well as early released re-suspended particles. This scenario was recently modeled using SIERRA/Fuego as part of a parametric sensitivity study, however there were some shortcomings of the analysis methods. First, the code at the time lacked a multi-component particle evaporation model, which is necessary to capture the particle size effect of liquid/solid particles that can dynamically evaporate the liquid component. Second, a particle sticking and resuspension model did not exist at the time of the study. Recent model implementation now permits the study be repeated with the improved physical models. In the earlier work, four potential mechanisms were considered to potentially contribute to the release of the particles. These were: 1. Evaporation Induced Entrainment (EIE); 2. Surface Agitation by Wind; 3. Surface Agitation by Boiling; 4. Residue Entrainment (Resuspension). The sensitivity study evaluated mechanism 1 and 3 in the above list. Parameters varied were selected to be a reflection of a practical range of test conditions. The varied parameters included the boiling duration, fuel height, injected mass, particle size, turbulence intensity, and initial particle height. The boiling duration was the most significant parameter. The most significant mechanism was no.3, Surface Agitation by Boiling. This paper reports the implementation of the new multi-component evaporation model and its effect on the findings from the previous effort. The Mishima and Schwendiman test was re-modeled with the new evaporation model, and the results of the re-evaluation are presented. (authors)

07 ISOTOPE AND RADIATION SOURCES↗

Dataset for 'Ombadi, M. & Varadharajan, C. (2022). Urbanization and aridity mediate distinct salinity response to floods in rivers and streams across the Contiguous United States, Water Research'

This package contains data sets and code used to obtain the results in Ombadi, M., & Varadharajan, C. (2022). Urbanization and aridity mediate distinct salinity response to floods in rivers and streams across the Contiguous United States. Water Research, 118664. The folder "data" contains 259 .csv files, each of which has daily time series of concurrent streamflow (Q) and specific conductance (SC) for each of the sites used in this study originally downloaded from the USGS National Water Information System (NWIS; USGS, 2016). The number of data points in each of the files is at least 3650 (i.e. 10 years of daily measurements). The folder "RF_single_data" contains 259 .csv files, each of which include data used to train and test the Random Forest models at individual sites for predicting SC during days of floods. The folder "RF_regional_data" contains 3 .csv files, each of which include scaled data compiled from all sites within each climate zone (arid, temperate and wet). "metadata.csv" contains the physical properties of the 259 catchments corresponding to the sites used in this study; this data was extracted from GAGES-II dataset (Falcone et al., 2010). "RF_implementation.ipynb" is a Jupyter notebook with the code needed to implement the analysis using Random Forest models either for individual sites or for the regional models (for each climate zone). The code utilizes the data in the two folders: "RF_single_data" and "RF_regional_data" and the metadata.csv file.

54 ENVIRONMENTAL SCIENCES↗

Analysis of LH Launcher Arrays (Like the ITER One) Using the TOPLHA Code

TOPLHA (Torino Polytechnic Lower Hybrid Antenna) code is an innovative tool for the 3D/1D simulation of Lower Hybrid (LH) antennas, i.e. accounting for realistic 3D waveguides geometry and for accurate 1D plasma models, and without restrictions on waveguide shape, including curvature. This tool provides a detailed performances prediction of any LH launcher, by computing the antenna scattering parameters, the current distribution, electric field maps and power spectra for any user-specified waveguide excitation. In addition, a fully parallelized and multi-cavity version of TOPLHA permits the analysis of large and complex waveguide arrays in a reasonable simulation time. A detailed analysis of the performances of the proposed ITER LH antenna geometry has been carried out, underlining the strong dependence of the antenna input parameters with respect to plasma conditions. A preliminary optimization of the antenna dimensions has also been accomplished. Electric current distribution on conductors, electric field distribution at the interface with plasma, and power spectra have been calculated as well. The analysis shows the strong capabilities of the TOPLHA code as a predictive tool and its usefulness to LH launcher arrays detailed design.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Improving Limit Surface Search Algorithms in RAVEN Using Acceleration Schemes: Level II Milestone

The RAVEN code is becoming a comprehensive tool to perform Probabilistic Risk Assessment (PRA); Uncertainty Quantification (UQ) and Propagation; and Verification and Validation (V&V). The RAVEN code is being developed to support the Risk-Informed Safety Margin Characterization (RISMC) pathway by developing an advanced set of methodologies and algorithms for use in advanced risk analysis. The RISMC approach uses system simulator codes applied to stochastic analysis tools. The fundamental idea behind this coupling approach to perturb (by employing sampling strategies) timing and sequencing of events, internal parameters of the system codes (i.e., uncertain parameters of the physics model) and initial conditions to estimate values ranges and associated probabilities of figures of merit of interest for engineering and safety (e.g. core damage probability, etc.). This approach applied to complex systems such as nuclear power plants requires performing a series of computationally expensive simulation runs. The large computational burden is caused by the large set of (uncertain) parameters characterizing those systems. Consequently, exploring the uncertain/parametric domain, with a good level of confidence, is generally not affordable, considering the limited computational resources that are currently available. In addition, the recent tendency to develop newer tools, characterized by higher accuracy and larger computational resources (if compared with the presently used legacy codes, that have been developed decades ago), has made this issue even more compelling. In order to overcome to these limitations, the strategy for the exploration of the uncertain/parametric space needs to use at best the computational resources focusing the computational effort in those regions of the uncertain/parametric space that are “interesting” (e.g., risk-significant regions of the input space) with respect the targeted Figures Of Merit (FOM): for example, the failure of the system, subject of the analysis. These methodologies are named, in the RAVEN environment, adaptive sampling strategies. These methodologies infer system responses from surrogate models constructed from already existing samples (produced using high fidelity simulations) and suggest the most relevant location (coordinate in the input space) of the next sampling point to be explored in the uncertain/parametric domain. When using those methodologies, it is possible to understand features of the system response with a small number of carefully selected samples. This report focuses on the development and improvement of the limit surface search. The limit surface is an important concept in system reliability analysis. Without going into the details, which will be covered later in the report, the limit surface could be briefly described as an hyper-surface in the system uncertainty/parametric space separating the regions leading to a prescribed system outcome. For example, if the uncertainty/parametric space is the one generated by the reactor power level and the duration of the batteries, the system is a nuclear power plant and the system outcome discriminating variable is the clad failure in a station blackout scenario, then the limit surface separates the combinations of reactor power level and battery duration that lead to clad failure from the ones that do not.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Data for “Tree root nutrient uptake kinetics vary with nutrient availability, environmental conditions, and root traits: A global analysis”

This data package contains data and code used in the paper “Tree root nutrient uptake kinetics vary with nutrient availability, environmental conditions, and root traits: A global analysis”. The central product is a global dataset of root inorganic nutrient uptake rates and kinetics parameters covering temperate, boreal, and sub/tropical tree species, representing a collection of nutrient uptake data from published studies. This dataset enables tree investigation of root nutrient uptake rates across species, space, and experimental conditions. The data can also be combined with supplementary data on root and soil traits or with external datasets (e.g. R scripts contained within use data from FRED 3.0; (Iversen et al., 2021)). Contained within is the main nutrient data “uptake_data.csv” as well as 4 additional .csv files that link uptake data to supplementary measurements, source references, taxonomic information, and additional nutrient uptake measurements across nutrient gradients, and 1 .csv file that records meta-analysis results for plotting with the R scripts. There are seven R scripts that support data analysis and creation of the figures in the related publication.

54 ENVIRONMENTAL SCIENCES↗

SIMULTANEOUS MULTI-BAND DETECTION OF LOW SURFACE BRIGHTNESS GALAXIES WITH MARKOVIAN MODELING

We present to the astronomical community an algorithm for the detection of low surface brightness (LSB) galaxies in images, called MARSIAA (MARkovian Software for Image Analysis in Astronomy), which is based on multi-scale Markovian modeling. MARSIAA can be applied simultaneously to different bands. It segments an image into a user-defined number of classes, according to their surface brightness and surroundings-typically, one or two classes contain the LSB structures. We have developed an algorithm, called DetectLSB, which allows the efficient identification of LSB galaxies from among the candidate sources selected by MARSIAA. The application of the method to two and three bands simultaneously was tested on simulated images. Based on our tests, we are confident that we can detect LSB galaxies down to a central surface brightness level of only 1.5 times the standard deviation from the mean pixel value in the image background. To assess the robustness of our method, the method was applied to a set of 18 B- and I-band images (covering 1.3 deg{sup 2} in total) of the Virgo Cluster to which Sabatini et al. previously applied a matched-filter dwarf LSB galaxy search algorithm. We have detected all 20 objects from the Sabatini et al. catalog which we could classify by eye as bona fide LSB galaxies. Our method has also detected four additional Virgo Cluster LSB galaxy candidates undetected by Sabatini et al. To further assess the completeness of the results of our method, both MARSIAA, SExtractor, and DetectLSB were applied to search for (1) mock Virgo LSB galaxies inserted into a set of deep Next Generation Virgo Survey (NGVS) gri-band subimages and (2) Virgo LSB galaxies identified by eye in a full set of NGVS square degree gri images. MARSIAA/DetectLSB recovered {approx}20% more mock LSB galaxies and {approx}40% more LSB galaxies identified by eye than SExtractor/DetectLSB. With a 90% fraction of false positives from an entirely unsupervised pipeline, a completeness of 90% is reached for sources with r{sub e} > 3'' at a mean surface brightness level of {mu}{sub g} = 27.7 mag arcsec{sup -2} and a central surface brightness of {mu}{sup 0}{sub g} = 26.7 mag arcsec{sup -2}. About 10% of the false positives are artifacts, the rest being background galaxies. We have found our proposed Markovian LSB galaxy detection method to be complementary to the application of matched filters and an optimized use of SExtractor, and to have the following advantages: it is scale free, can be applied simultaneously to several bands, and is well adapted for crowded regions on the sky.

79 ASTRONOMY AND ASTROPHYSICS↗

Dry Air Cooler Modeling for Supercritical Carbon Dioxide Brayton Cycle Analysis

Modeling for commercially available and cost effective dry air coolers such as those manufactured by Harsco Industries has been implemented in the Argonne National Laboratory Plant Dynamics Code for system level dynamic analysis of supercritical carbon dioxide (sCO 2 ) Brayton cycles. The modeling can now be utilized to optimize and simulate sCO 2 Brayton cycles with dry air cooling whereby heat is rejected directly to the atmospheric heat sink without the need for cooling towers that require makeup water for evaporative losses. It has sometimes been stated that a benefit of the sCO 2 Brayton cycle is that it enables dry air cooling implying that the Rankine steam cycle does not. A preliminary and simple examination of a Rankine superheated steam cycle and an air-cooled condenser indicates that dry air cooling can be utilized with both cycles provided that the cycle conditions are selected appropriately

42 ENGINEERING↗

Development of Switchable Polarity Solvent Draw Solutes

Results of a computational fluid dynamic (CFD) study of flow and heat transfer in a printed circuit heat exchanger (PCHE) geometry are presented. CFD results obtained from a two-plate model are compared to corresponding experimental results for the validation. This process provides the basis for further application of the CFD code to PCHE design and performance analysis in a variety of internal flow geometries. As a part of the code verification and validation (V&V) process, CFD simulation of a single semicircular straight channel under laminar isothermal conditions was also performed and compared to theoretical results. This comparison yielded excellent agreement with the theoretical values. The two-plate CFD model based on the experimental PCHE design overestimated the effectiveness and underestimated the pressure drop. However, it is found that the discrepancy between the CFD result and experimental data was mainly caused by the uncertainty in the geometry of heat exchanger during the fabrication. The CFD results obtained using a slightly smaller channel diameter yielded good agreement with the experimental data. A separate investigation revealed that the average channel diameter of the OSU PCHE after the diffusion-bonding was 1.93 mm on the cold fluid side and 1.90 mm on the hot fluid side which are both smaller than the nominal design value. Consequently, the CFD code was shown to have sufficient capability to evaluate the heat exchanger thermal-hydraulic performance.

42 ENGINEERING↗

Experimental and numerical studies of seismic fluid-structure interaction in a base-supported cylindrical vessel

Seismic design and qualification of advanced reactors will rely heavily on the use of verified and validated numerical models capable of capturing the interaction of the vessel, its contained fluid, and the internal equipment: fluid-structure interaction (FSI) analysis. Analytical solutions can be used for preliminary sizing and design of such vessels but their application is limited to simple geometries and boundary conditions, and small amplitude, translational (and rotational) inputs. To validate numerical models for seismic FSI analysis in finite element codes, a comprehensive set of experiments was performed on a liquid-filled cylindrical vessel, using a 6 degree-of-freedom earthquake simulator. Results in terms of sloshing frequency, damping ratio in sloshing modes, and hydrodynamic responses (wave height, hydrodynamic pressure, base shear, and base moment) for multi-directional earthquake simulator inputs are reported and compared with analytical solutions for liquid-filled vessels. The impact of seismic (base) isolation on hydrodynamic responses was studied using earthquake simulator inputs generated using a virtual isolation system. Data from the experiments are used to validate a numerical model of the fluid-filled vessel using the Arbitrary Lagrangian Eulerian (ALE) solver in the commercial finite element program LS-DYNA. Validation studies are presented for multi-directional seismic inputs, including rocking motions. Lagrangian modeling approaches using an elastic material formulation for the fluid are also investigated and their limitations and possible applications are identified. Here, the results are broadly applicable to the seismic response of base supported, liquid-filled vessels.

58 GEOSCIENCES↗

Algorithms and algebraic solutions of decay chain differential equations for stable and unstable nuclide fractionation

Radioactive decay processes, such as alpha decay, produce decay chains where the mass numbers of nuclides decrease as larger nuclides expel energetic particles to form smaller nuclides. Under these conditions, the coefficient matrix that describes the differential rate expressions for radioactive decay can be made lower triangular. With this special structure, formulating an algebraic solution to the decay chains can be done by first formulating the eigenvectors that make up the coefficient matrix, which can then be solved using forward substitution for a lower triangular matrix. This work details the derivation of algebraic solutions for decay chains of any number of stable and unstable nuclides with any number of branching based on this eigenvector analysis. A prototype computational code was developed to validate and compare this methodology against a number of other methods for solving similar systems. A two-phase sorting algorithm yielding the lower triangular matrix structure was established to apply the developed algebraic solutions for decay chains involving beta-emitting radionuclides transformed into daughter nuclides without change in their mass number. In conclusion, the methodologies produced in this work provide an efficient way to estimate nuclide fractions from natural decay processes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Reproducibility in G 0 W 0 calculations for solids

Ab initio many-body perturbation theory within the GW approximation is a Green's function formalism widely used in the calculation of quasiparticle excitation energies of solids. In what has become an increasingly standard approach, Kohn–Sham eigenenergies, generated from a DFT calculation with a strategically-chosen exchange–correlation functional “starting point”, are used to construct G and W, and then perturbatively corrected by the resultant GW self-energy. In practice, there are several ways to construct the GW self-energy, and these can lead to variations in predicted quasiparticle energies. For example, for ZnO and TiO 2 , the GW fundamental gaps reported in the literature can vary by more than 1 eV depending on the GW code used. In this work, we calculate and analyze GW quasiparticle (QP) energies of these and other systems with three different GW codes: BERKELEYGW, ABINIT and YAMBO. Through a systematic analysis of the GW implementation of these three codes, we identify the primary origin of major discrepancies between codes reported in prior literature to be the different implementations the Coulomb divergence in the Fock exchange term and the frequency integration scheme of the GW self-energy. We then eliminate these discrepancies by using common numerical methods and algorithms, demonstrating that the same quasiparticle energies for a given material can be obtained with different codes, within numerical differences ascribable to the technical details of the underling implementations. This work will be important for users and developers in assessing the precision of future GW applications and methods.

36 MATERIALS SCIENCE↗

What to expect when you're expecting engagement: Delivering procedural justice in large-scale solar energy deployment

Community engagement in the planning process to build large-scale solar (LSS) projects can win local support and advance procedural justice. However, an understanding of community engagement in current LSS development is lacking. Using responses from a U.S. nationwide survey (n = 979) of residential neighbors living within 3 miles (4.8 km) of completed LSS projects (i.e. “solar neighbors”) and project details from the U.S. Large-Scale Solar Photovoltaic Database (USPVDB), this study seeks to answer the following questions: How are solar neighbors' perceptions of community engagement associated with their attitudes toward their LSS projects? How do solar neighbors' perceptions of community engagement compare to their expectations? And, how do neighbors explain what they perceived about the planning process? We answer these questions using mixed methods, including regression modeling, a new gap analysis technique, and qualitative coding. We find that higher perceived engagement is associated with more positive attitudes toward the project, even when controlling for respondents who acted in opposition. Supporters and opponents alike expect more engagement than they perceived and information about projects both before construction and after operation is lacking. Awareness and engagement expectations increase at certain project size and proximity thresholds. However, most neighbors expect the public to offer input during engagement, but not make decisions. We contextualize these findings with explanatory comments from respondents.

14 SOLAR ENERGY↗

Integrated simulation of U-10Mo monolithic fuel swelling behavior

Here, a separate computational branch has been implemented within the DART (Dispersion Analysis Research Tool) computational code to simulate the swelling behavior of U-10Mo monolithic fuel under the operating conditions of high-power research and test reactors (RTRs). The monolithic branch of the DART code implements a mechanistic rate-theory-based fission-gas-behavior model for the calculation of fission gas swelling, as well as a suite of thermal, physical, and mechanical models to take into account various processes occurring in RTR fuels during irradiation. In order to accurately simulate and eventually predict U-10Mo monolithic fuel irradiation behavior, the code uses materials properties calculated with lower length-scale computational methods, such as gas atom diffusivity and U-Mo surface energy from atomic simulations and grain-morphology-specific recrystallization kinetics (recrystallized fuel volume fractions vs. fission density) predicted using the phase-field method. The remainder of fission gas behavior parameters used in the model were calibrated with measured intergranular bubble size distributions. With this integrated simulation approach, the swelling behavior of U-10Mo monolithic fuel was simulated for various initial grain sizes at different operating conditions and compared with measured data. Furthermore, because limited experimental data exist for parameter calibration detailed sensitivity studies for the important parameters used in the fission gas behavior model were performed in order to examine their impact on both intergranular gas bubble morphology at low fission density, and on total porosity at high fission density.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Verification and validation of the Alternative Nonlinear Two-phase Subchannel (ANTS) code

The Alternative Nonlinear Two-phase Subchannel solver (ANTS) code was written to provide a fast-running, steady-state, pin-resolved modeling and simulation tool for analysis of common boiling water reactor (BWR) geometry and common operating conditions. ANTS has been integrated into the Virtual Environment for Reactor Application (VERA) core simulator software, where it can be used to provide a thermal/hydraulic (T/H) subchannel solution that is then used to provide neutronic feedback as well as perform the fuel depletion and temperature solution. Herein, this paper presents the rigorous analysis performed on the ANTS code, which includes both code and solution verification testing, benchmarking with the existing two-phase subchannel capability in VERA, CTF, and validation testing using popular two-phase experiments such as PWR Sub-channel and Bundle Tests (PSBT), BWR Full-size Fine-mesh Bundle Tests (BFBT), Risø, and FRIGG. This assessment was used to qualify ANTS for its intended applications before its use for core-scale, multiphysics BWR simulations. In general, it was found that agreement with experimental data was good; errors were within the range of experimental data uncertainty. Furthermore, code and solution verification confirmed that the governing equations and the most important closure terms were correctly implemented and behaving as expected.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

RELAP5-3D validation studies based on the High Temperature Test facility

In the spring and summer of 2019, experiments were conducted at the High Temperature Test Facility (HTTF) that form the basis of an upcoming high-temperature gas-cooled reactor (HTGR) thermal hydraulics (T/H) benchmark. HTTF is an integral effects test facility for HTGR T/H modeling validation. This paper presents RELAP5-3D models of two of those experiments: PG-27, a pressurized conduction cooldown (PCC); and PG-29, a depressurized conduction cooldown (DCC). These models used the RELAP5-3D model of HTTF originally developed by Paul Bayless as a starting point. The sensitivity analysis and uncertainty quantification code, RAVEN was used to perform calibration studies for the steady-state portion of PG-27. Here we developed four PG-27 calibrations based on steady-state conditions. These calibrations all used an effective thermal conductivity equal to 36 % of the measured thermal conductivity, but they differed with respect to the frictional pressure drops and radial conduction models. These models all captured the trends in steady-state temperature distributions and transient temperature behavior well. All four calibrations show room for improvement in predicting the transient temperature rise. The smallest error in temperature rise during the transient was a 21 % underprediction, and the largest was a 48 % underprediction. The errors in transient temperature rise are largely a result of a mismatch in power density between the RELAP5-3D model and the experiment due to the location of active heater rods along the boundary between heat structures in the model. The best of these calibrations was applied to PG-29 to model the DCC. Once again, temperatures during the transient were underpredicted but trends in temperature were captured. The RELAP5-3D model captured trends in the data but could not reproduce measured temperatures exactly. This result is not attributed to deficiencies in the experimental data or to RELAP5–3D itself. Rather, this result likely arises due to the some of the assumptions and decisions made when the RELAP5-3D model was first developed, prior to the execution of HTTF experiments. An agreement in prediction of temperature trends but challenges reproducing HTTF temperatures within measurement uncertainty is consistent with previous analyses of HTTF in the literature. Future RELAP5-3D validation activities centered around HTTF may be able to provide greater insight into the code’s capabilities for HTGR modeling with a more finely nodalized model.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗