Search NASA⌕ Search

SEARCH · Search NASA

Results for “control electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Size-Resolved Chemical Composition of Particles Collected Using STAC at the Ground Site During the SAIL Campaign in Gunnison, Colorado

Aerosol particles were collected using a four-stage Size and Time-resolved Aerosol Collector (STAC) during the SAIL field campaign. Each stage of STAC separates particles into distinct aerodynamic size fractions with 50% cut-off diameters: Stage A: 2.27 µm Stage B: 0.615 µm Stage C: 0.421 µm Stage D: 0.119 µm Each stage provides both size- and time-resolved sampling, enabling investigation of particle composition across different atmospheric regimes. Only a subset of samples was selected for analysis based on prevailing meteorological conditions (e.g., temperature, humidity, and air-mass influence) to capture representative aerosol types under distinct weather patterns. Collected substrates were first examined under Scanning Electron Microscopy (SEM) to evaluate particle loading, morphology, and spatial distribution. Subsequently, Computer-Controlled Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopy (CCSEM/EDX) was performed to obtain size-resolved elemental composition of individual particles. A rule-based classification scheme was applied to categorize particles into major compositional groups (e.g., biological, carbonaceous, dust, sulfate, Na-rich, and mixed types). This dataset provides high-resolution morphological and chemical information on atmospheric particles collected during the SAIL campaign, offering insights into the influence of meteorology on aerosol composition and mixing state.

Size and Time-resolved Aerosol Collector↗

Electro-optic architecture (EOA) for sensors and actuators in aircraft propulsion systems

Results of a study to design an optimal architecture for electro-optical sensing and control in advanced aircraft and space systems are described. The propulsion full authority digital Electronic Engine Control (EEC) was the focus for the study. The recommended architecture is an on-engine EEC which contains electro-optic interface circuits for fiber-optic sensors on the engine. Size and weight are reduced by multiplexing arrays of functionally similar sensors on a pair of optical fibers to common electro-optical interfaces. The architecture contains common, multiplex interfaces to seven sensor groups: (1) self luminous sensors; (2) high temperatures; (3) low temperatures; (4) speeds and flows; (5) vibration; (6) pressures; and (7) mechanical positions. Nine distinct fiber-optic sensor types were found to provide these sensing functions: (1) continuous wave (CW) intensity modulators; (2) time division multiplexing (TDM) digital optic codeplates; (3) time division multiplexing (TDM) analog self-referenced sensors; (4) wavelength division multiplexing (WDM) digital optic code plates; (5) wavelength division multiplexing (WDM) analog self-referenced intensity modulators; (6) analog optical spectral shifters; (7) self-luminous bodies; (8) coherent optical interferometers; and (9) remote electrical sensors. The report includes the results of a trade study including engine sensor requirements, environment, the basic sensor types, and relevant evaluation criteria. These figures of merit for the candidate interface types were calculated from the data supplied by leading manufacturers of fiber-optic sensors.

Glomb, W. L., Jr.↗

Redox Gating for Colossal Carrier Modulation and Unique Phase Control

Redox gating, a novel approach distinct from conventional electrolyte gating, combines reversible redox functionalities with common ionic electrolyte moieties to engineer charge transport, enabling power-efficient electronic phase control. This study achieves a colossal sheet carrier density modulation beyond 10 16 cm -2 , sustainable over thousands of cycles, all within the sub-volt regime for functional oxide thin films. The key advantage of this method lies in the controlled injection of a large quantity of carriers from the electrolyte into the channel material without the deleterious effects associated with traditional electrolyte gating processes such as the production of ionic defects or intercalated species. The redox gating approach offers a simple and practical means of decoupling electrical and structural phase transitions, enabling the isostructural metal-insulator transition and improved device endurance. The versatility of redox gating extends across multiple materials, irrespective of their crystallinity, crystallographic orientation, or carrier type (n- or p-type). This inclusivity encompasses functional heterostructures and low-dimensional quantum materials composed of sustainable elements, highlighting the broad applicability and potential of the technique in electronic devices.

36 MATERIALS SCIENCE↗

Gas Flow Detection System

This system provides a portable means to detect gas flow through a thin-walled tube without breaking into the tubing system. The flow detection system was specifically designed to detect flow through two parallel branches of a manifold with only one inlet and outlet, and is a means for verifying a space shuttle program requirement that saves time and reduces the risk of flight hardware damage compared to the current means of requirement verification. The prototype Purge Vent and Drain Window Cavity Conditioning System (PVD WCCS) Flow Detection System consists of a heater and a temperature-sensing thermistor attached to a piece of Velcro to be attached to each branch of a WCCS manifold for the duration of the requirement verification test. The heaters and thermistors are connected to a shielded cable and then to an electronics enclosure, which contains the power supplies, relays, and circuit board to provide power, signal conditioning, and control. The electronics enclosure is then connected to a commercial data acquisition box to provide analog to digital conversion as well as digital control. This data acquisition box is then connected to a commercial laptop running a custom application created using National Instruments LabVIEW. The operation of the PVD WCCS Flow Detection System consists of first attaching a heater/thermistor assembly to each of the two branches of one manifold while there is no flow through the manifold. Next, the software application running on the laptop is used to turn on the heaters and to monitor the manifold branch temperatures. When the system has reached thermal equilibrium, the software application s graphical user interface (GUI) will indicate that the branch temperatures are stable. The operator can then physically open the flow control valve to initiate the test flow of gaseous nitrogen (GN2) through the manifold. Next, the software user interface will be monitored for stable temperature indications when the system is again at thermal equilibrium with the test flow of GN2. The temperature drop of each branch from its "no flow" stable temperature peak to its stable "with flow" temperature will allow the operator to determine whether a minimum level of flow exists. An alternative operation has the operator turning on the software only long enough to record the ambient temperature of the tubing before turning on the heaters and initiating GN2 flow. The stable temperature of the heated tubing with GN2 flow is then compared with the ambient tubing temperature to determine if flow is present in each branch. To help quantify the level of flow in the manifolds, each branch will be bench calibrated to establish its thermal properties using the flow detection system and different flow rates. These calibration values can then be incorporated into the software application to provide more detailed flow rate information.

Moss, Thomas↗

Applications of high thermal conductivity composites to electronics and spacecraft thermal design

Recently, high thermal conductivity graphite fiber-reinforced metal matrix composites (MMCs) have become available that can save weight over present methods of heat conduction. Another significant advantage is that these materials can be used without the plumbing and testing complexities that accompany the use of liquid heat pipes. A spinoff of this research was the development of other MMCs as electronic device heat sinks. These use particulates rather than fibers and are formulated to match the coefficient of thermal expansion of electronic substrates in order to alleviate thermally induced stresses. The development of both types of these materials as viable weight-saving substitutes for the traditional methods of thermal control for electronics packaging and also for spacecraft thermal control applications are the subjects of this report.

Sharp, G. Richard↗

Using Graphene Liquid Cell Transmission Electron Microscopy to Study in Situ Nanocrystal Etching

Graphene liquid cell electron microscopy provides the ability to observe nanoscale chemical transformations and dynamics as the reactions are occurring in liquid environments. This manuscript describes the process for making graphene liquid cells through the example of graphene liquid cell transmission electron microscopy (TEM) experiments of gold nanocrystal etching. The protocol for making graphene liquid cells involves coating gold, holey-carbon TEM grids with chemical vapor deposition graphene and then using those graphene-coated grids to encapsulate liquid between two graphene surfaces. These pockets of liquid, with the nanomaterial of interest, are imaged in the electron microscope to see the dynamics of the nanoscale process, in this case the oxidative etching of gold nanorods. By controlling the electron beam dose rate, which modulates the etching species in the liquid cell, the underlying mechanisms of how atoms are removed from nanocrystals to form different facets and shapes can be better understood. Graphene liquid cell TEM has the advantages of high spatial resolution, compatibility with traditional TEM holders, and low start-up costs for research groups. Current limitations include delicate sample preparation, lack of flow capability, and reliance on electron beam-generated radiolysis products to induce reactions. With further development and control, graphene liquid cell may become a ubiquitous technique in nanomaterials and biology, and is already being used to study mechanisms governing growth, etching, and self-assembly processes of nanomaterials in liquid on the single particle level.

36 MATERIALS SCIENCE↗

High‐Performance Al–S Batteries by Spin Polarization Modulation via Catalytic Ni‐MoS 2 Nanosheets

Aluminum–sulfur (Al–S) batteries catalysts with adsorption and catalytic capabilities can effectively improve the slow redox kinetics, but the current research often ignores the effect of optimizing the electronic structure of the catalyst on improving charge transfer and adsorption. Here, in this study, Ni-doped monolayer MoS 2 nanosheets are synthesized and used as a catalytic additive for the sulfur cathode. The addition of Ni promotes spin splitting of 4d orbital of Mo, thereby affecting polarization degree of the basal plane sulfur and making it change from a low spin state to a high spin one. This high spin configuration raises the electron energy level and provides an active electron state to react with aluminum polysulfides (AlPSs), which optimizes the adsorption energy. At the same time, it accelerates electron transfer and lowers the energy barrier for the overall conversion of the polysulfides. Benefiting from these features, Al–S batteries based on rationally designed S@Ni-MoS 2 /C cathodes exhibit a high initial capacity (1603.0 mAh g −1 at 0.5 A g −1 ) and extraordinary cycling stability (0.035% capacity decay rate during 2000 cycles). This study showcases a spin-polarized electronic structure control strategy to enhance catalytic activity, providing a viable approach for developing efficient catalysts for practical Al–S batteries.

Aluminum-sulfur batteries↗

Controlling ferromagnetism of (In,Fe)As semiconductors by electron doping

Based on experimental results, using the Korringa-Kohn-Rostoker coherent potential approximation (KKR-CPA) method and Monte Carlo simulation, we study the mechanism of ferromagnetic behavior of (In,Fe)As. We show that with doped Be atoms occupying in interstitial sites, chemical pair interactions between atoms and magnetic exchange interactions between Fe atoms change due to electron concentration. Therefore, by controlling the doping process, magnetic behavior of (In,Fe)As is controlled and ferromagnetism is observed in this semiconductor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Floquet engineering of strongly driven excitons in monolayer tungsten disulfide

Interactions of quantum materials with strong-laser fields can induce exotic nonequilibrium electronic states. Monolayer transition-metal dichalcogenides, a new class of direct-gap semiconductors with prominent quantum confinement, offer exceptional opportunities toward Floquet engineering of quasiparticle electron-hole states, or excitons. Strong-field driving has a potential to achieve enhanced control of electronic band structure, thus a possibility to open a new realm of exciton light-matter interactions. However, experimental implementation of strongly-driven excitons has so far remained out of reach. Here, we use mid-infrared laser pulses below the optical bandgap to excite monolayer tungsten disulfide up to a field strength of 0.3 V/nm, and demonstrate strong-field light dressing of excitons in the excess of a hundred millielectronvolt. Our high-sensitivity transient absorption spectroscopy further reveals formation of a virtual absorption feature below the 1s-exciton resonance, which is assigned to a light-dressed sideband from the dark 2p-exciton state. Quantum-mechanical simulations substantiate the experimental results and enable us to retrieve real-space movies of the exciton dynamics. Here, this study advances our understanding of the exciton dynamics in the strong-field regime, and showcases the possibility of harnessing ultrafast, strong-field phenomena in device applications of two-dimensional materials.

36 MATERIALS SCIENCE↗

Moderate pressure plasma source of nonthermal electrons

Plasma sources of electrons offer control of gas and surface chemistry without the need for complex vacuum systems. The plasma electron source presented here is based on a cold cathode glow discharge (GD) operating in a dc steady state mode in a moderate pressure range of 2–10 torr. Ion-induced secondary electron emission is the source of electrons accelerated to high energies in the cathode sheath potential. The source geometry is a key to the availability and the extraction of the nonthermal portion of the electron population. The source consists of a flat and a cylindrical electrode, 1 mm apart. Our estimates show that the length of the cathode sheath in the plasma source is commensurate (~0.5–1 mm) with the inter-electrode distance so the GD operates in an obstructed regime without a positive column. Estimations of the electron energy relaxation confirm the non-local nature of this GD, hence the nonthermal portion of the electron population is available for extraction outside of the source. The use of a cylindrical anode presents a simple and promising method of extracting the high energy portion of the electron population. Langmuir probe measurements and optical emission spectroscopy confirm the presence of electrons with energies ~15 eV outside of the source. These electrons become available for surface modification and radical production outside of the source. In conclusion, the extraction of the electrons of specific energies by varying the anode geometry opens exciting opportunities for future exploration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evolution of magnetoresistance in the magnetic topological semimetals NdS⁢b 𝑥⁢ T⁢e 2−𝑥

Magnetic topological semimetals 𝐿𝑛⁢SbTe (𝐿𝑛=lanthanide elements) provide a platform to study the interplay of structure, magnetism, topology, and electron correlations. Varying Sb and Te compositions in 𝐿⁢𝑛⁢S⁢b 𝑥 ⁢T⁢e 2−𝑥 can effectively control the electronic, magnetic, and transport properties. Here, we report the evolution of transport properties with Sb and Te contents in NdS⁢b 𝑥 ⁢T⁢e 2−𝑥 , (0<𝑥<1). Our work reveals nonmonotonic evolution in magnetoresistance with varying composition stoichiometry. Specifically, reducing Sb content 𝑥 leads to strong negative magnetoresistance up to 99.9%. Such a strong magnetoresistance, which is likely attributed to the interplay between structure, magnetism, and electronic bands, establishes this material as a promising platform for investigating topological semimetal for future device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multiple sensor smart robot hand with force control

A smart robot hand developed at JPL for the Protoflight Manipulator Arm (PFMA) is described. The development of this smart hand was based on an integrated design and subsystem architecture by considering mechanism, electronics, sensing, control, display, and operator interface in an integrated design approach. The mechanical details of this smart hand and the overall subsystem are described elsewhere. The sensing and electronics components of the JPL/PFMA smart hand are summarized and it is described in some detail in control capabilities.

Killion, Richard R.↗

Thermal control across a chain of electronic nanocavities

Here, we study a chain of alternating hot and cold electronic nanocavities—connected to one another via resonant-tunneling quantum dots—with the intent of achieving precise thermal control across the chain. This is accomplished by positioning the dots' energy levels such that a predetermined distribution of heat currents is realized across the chain in the steady state. The number of electrons in each cavity is conserved in the steady state which constrains the cavities' chemical potentials. We determine these chemical potentials analytically in the linear response regime where the energy differences between the dots' resonant levels and the neighboring chemical potentials are much smaller than the thermal energy. In this regime, the thermal control problem can be solved exactly, while, in the general case, thermal control can only be achieved in a relative sense, that is, when one only preassigns the ratios between different heat currents. We apply our results to two different cases: We first demonstrate that a “heat switch” can be easily realized with three coupled cavities, and then we show that our linear response results can provide accurate results in situations with a large number of cavities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Achieving 19% efficiency in non-fused ring electron acceptor solar cells via solubility control of donor and acceptor crystallization

Non-fused ring electron acceptors (NFREAs) potentially have lower synthetic costs than their fused counterparts. However, the low backbone planarity and the presence of bulky substituents adversely affect the crystallinity of NFREAs, impeding charge transport and the formation of bicontinuous morphology in organic solar cells. Here we show that a binary solvent system can individually control the crystallization and phase separation of the donor polymer (for example, D18) and the NFREA (for example, 2BTh-2F-C 2 ). We select solvents such as chloroform and o -xylene that evaporate at different temperatures and rates and have different solubility for D18. Upon evaporation of chloroform, D18 starts to assemble into fibrils. Then, the evaporation of o-xylene induces the rapid formation of a fibril network that phase segregates 2BTh-2F-C 2 into pure domains and leads to a bicontinuous morphology. In conclusion, the well-defined interpenetrating network morphology affords an efficiency of 19.02% on small-area cells and 17.28% on 1 cm 2 devices.

14 SOLAR ENERGY↗

In vitro chick pre-cardiac explant tissue differentiation during spaceflight on SpaceHab-02

Chick precardiac tissue explants were cultured on the 8-day mission of STS-60, space shuttle Discovery. Development of in vitro cultures of precardiac chick tissue from embryo stages 5 though 8 (H-H) were initiated during orbit and were terminated after approximately fifteen hours of 37 degree C culture. Transmission electron microscopy and tritiated thymidine studies were performed postflight. No significant differences in cell proliferation were observed between flight and ground controls. Electron-microscopic studies revealed stage 8 explants were capable of differentiation during flight in a pattern which matched ground control tissues. As anticipated, stage 7 explant tissues had differentiated to a lesser extent compared to stage 8 tissues. Interestingly, stage 7 precardiac explant flight tissue differentiation was less than ground control tissue. This difference in differentiation between flight and ground cultures was enhanced in stage 6 tissues, as high levels of myofibril organization were only seen in ground controls. Other cellular components such as Golgi apparatus, junctional complexes, and mitochondria were present and appeared normal and healthy.

NASA Program NSCORT↗

An enhanced SOCP-based method for feeder load balancing using the multi-terminal soft open point in active distribution networks

The integration of distributed generators (DGs) exacerbates the feeder power flow fluctuation and load unbalanced condition in active distribution networks (ADNs). The unbalanced feeder load causes inefficient use of network assets and network congestion during system operation. The flexible interconnection based on the multi-terminal soft open point (SOP) significantly benefits the operation of ADNs. The multi-terminal SOP, which is a controllable power electronic device installed to replace the normally open point, provides accurate active and reactive power flow control to enable the flexible connection of feeders. An enhanced SOCP-based method for feeder load balancing using the multi-terminal SOP is proposed in this paper. Furthermore, by regulating the operation of the multi-terminal SOP, the proposed method can mitigate the unbalanced condition of feeder load and simultaneously reduce the power losses of ADNs. Then, the original non-convex model is converted into a second-order cone programming (SOCP) model using convex relaxation. In order to tighten the SOCP relaxation and improve the computation efficiency, an enhanced SOCP-based approach is developed to solve the proposed model. Finally, case studies are performed on the modified IEEE 33-node system to verify the effectiveness and efficiency of the proposed method.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Nanoscale topographical replication of graphene architecture by artificial DNA nanostructures

Despite many studies on how geometry can be used to control the electronic properties of graphene, certain limitations to fabrication of designed graphene nanostructures exist. Here, we demonstrate controlled topographical replication of graphene by artificial deoxyribonucleic acid (DNA) nanostructures. Owing to the high degree of geometrical freedom of DNA nanostructures, we controlled the nanoscale topography of graphene. The topography of graphene replicated from DNA nanostructures showed enhanced thermal stability and revealed an interesting negative temperature coefficient of sheet resistivity when underlying DNA nanostructures were denatured at high temperatures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electronic structure of boron and aluminum δ -doped layers in silicon

Recent work on atomic-precision dopant incorporation technologies has led to the creation of both boron and aluminum δ-doped layers in silicon with densities above the solid solubility limit. For this study, we use density functional theory to predict the band structure and effective mass values of such δ layers, first modeling them as ordered supercells. Structural relaxation is found to have a significant impact on the impurity band energies and effective masses of the boron layers, but not the aluminum layers. However, disorder in the δ layers is found to lead to a significant flattening of the bands in both cases. We calculate the local density of states and doping potential for these δ-doped layers, demonstrating that their influence is highly localized with spatial extents at most 4 nm. We conclude that acceptor δ-doped layers exhibit different electronic structure features dependent on both the dopant atom and spatial ordering. This suggests prospects for controlling the electronic properties of these layers if the local details of the incorporation chemistry can be fine-tuned.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗