Search NASA⌕ Search

SEARCH · Search NASA

Results for “current operating point”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

3D CFD Electrochemical and Heat Transfer Model of an Integrated-Planar Solid Oxide Electrolysis Cells

A three-dimensional computational fluid dynamics (CFD) electrochemical model has been created to assess hightemperature electrolysis performance of an Integrated Planar porous-tube-supported Solid Oxide Electrolysis Cell (IPSOEC). The model includes ten integrated planar cells in a segmented-in-series geometry deposited on a flattened ceramic support tube. Mass, momentum, energy, and species conservation and transport are provided via the core features of the commercial CFD code FLUENT. A solid-oxide fuel cell (SOFC) module adds the electrochemical reactions and loss mechanisms and computation of the electric field throughout the cell. The FLUENT SOFC user-defined subroutine was modified for this work to allow for operation in the SOEC mode. Model results provide detailed profiles of temperature, Nernst potential, operating potential, activation over-potential, anode-side gas composition, cathode-side gas composition, current density and hydrogen production over a range of stack operating conditions. Predicted mean outlet hydrogen and steam concentrations vary linearly with current density, as expected. Contour plots of local electrolyte temperature, current density, and Nernst potential indicated the effects of heat transfer, endothermic reaction, Ohmic heating, and change in local gas composition. Results are discussed for using this design in the electrolysis mode. Discussion of thermal neutral voltage, enthalpy of reaction, hydrogen production is reported herein. Predictions show negative pressure in the H2 electrode, indicating a possible limit of H2O diffusion through the ceramic tube. Minimum temperatures occur in the fuel and air downstream corner of the ceramic tube for voltages below the thermal neutral point.

Source record↗

Delay/Disruption Tolerance Networking (DTN) Implementation and Utilization Options on the International Space Station

The International Space Station (ISS) is in an operational configuration and nearing final assembly. With its maturity and diverse payloads onboard, the opportunity exists to extend the orbital lab into a facility to exercise and demonstrate Delay/Disruption Tolerant Networking (DTN). DTN is an end-to-end network service providing communications through environments characterized by intermittent connectivity, variable delays, high bit error rates, asymmetric links and simplex links. The DTN protocols, also known as bundle protocols, provide a store-and-forward capability to accommodate end-to-end network services. Key capabilities of the bundling protocols include: the Ability to cope with intermittent connectivity, the Ability to take advantage of scheduled and opportunistic connectivity (in addition to always up connectivity), Custody Transfer, and end-to-end security. Colorado University at Boulder and the Huntsville Operational Support Center (HOSC) have been developing a DTN capability utilizing the Commercial Generic Bioprocessing Apparatus (CGBA) payload resources onboard the ISS, at the Boulder Payload Operations Center (POC) and at the HOSC. The DTN capability is in parallel with and is designed to augment current capabilities. The architecture consists of DTN endpoint nodes on the ISS and at the Boulder POC, and a DTN node at the HOSC. The DTN network is composed of two implementations; the Interplanetary Overlay Network (ION) and the open source DTN2 implementation. This paper presents the architecture, implementation, and lessons learned. By being able to handle the types of environments described above, the DTN technology will be instrumental in extending networks into deep space to support future missions to other planets and other solar system points of interest. Thus, this paper also discusses how this technology will be applicable to these types of deep space exploration missions.

Holbrook, Mark↗

Human Mars Landing Site and Impacts on Mars Surface Operations

This paper describes NASA's initial steps for identifying and evaluating candidate Exploration Zones (EZs) and Regions of Interests (ROIs) for the first human crews that will explore the surface of Mars. NASA's current effort to define the exploration of this planet by human crews, known as the Evolvable Mars Campaign (EMC), provides the context in which these EZs and ROIs are being considered. The EMC spans all aspects of a human Mars mission including launch from Earth, transit to and from Mars, and operations on the surface of Mars. Studies related to Mars surface operations and related system capabilities have led to the current definition of an EZ as well as ROIs. An EZ is a collection of ROIs that are located within approximately 100 kilometers of a centralized landing site. ROIs are areas that are relevant for scientific investigation and/or development/maturation of capabilities and resources necessary for a sustainable human presence. The EZ also contains one or more landing sites and a habitation site that will be used by multiple human crews during missions to explore and utilize the ROIs within the EZ. With the EMC as a conceptual basis, the EZ model has been refined to a point where specific site selection criteria for scientific exploration and in situ resource utilization can be defined. In 2015 these criteria were distributed to the planetary sciences community and the in situ resource utilization and civil engineering communities as part of a call for EZ proposals. The resulting "First Landing Site/Exploration Zone Workshop for Human Missions to the Surface of Mars" was held in October 2015 during which 47 proposals for EZs and ROIs were presented and discussed. Proposed locations spanned all longitudes and all allowable latitudes (+/- 50 degrees). Proposed justification for selecting one of these EZs also spanned a significant portion of the scientific and resource criteria provided to the community. Workshop results will be used to prepare for follow-on workshops to refine our understanding of proposed EZs and ultimately select a single location to be explored and utilized by human crews. Another significant workshop outcome was a recognition that new data will be needed to refine our understanding of the value of proposed EZs. These new data will come in part from existing spacecraft at Mars and may come from future robotic Mars missions as appropriate consideration is given to these new data needs during mission definition and development.

Bussey, Ben↗

Broadening JPL’s Mission Formulation Paradigm with Human Centered Design

Within NASA’s highly competitive environment for funding, Human Centered Design (HCD) and cybernetics could provide advantages to proposers during the mission formulation phase. Opportunities are limited when it comes to funding new science missions. Proposers are challenged to make a compelling case about the scientific desirability, technical feasibility, and resource viability of their concepts. Organizations follow established processes for proposal development using teams that typically include scientists, engineers, and managers. These team members are highly experienced subject matter experts (SME) in their own disciplines, and can respond to requirements from the solicitation. However, they are typically not trained as designers and communicators. Their approach is rooted within NASA’s science and technology paradigm. How can we improve the proposal development process, refine workflow between team members, and deliver clear and appealing offerings to the stakeholders and evaluators? These questions have been addressed by today’s most innovative companies (e.g., Apple, Google, 3M, Dyson), where the design process is not limited simply to engineering and management, but involves an all-encompassing approach drawing from fields such as social sciences, design, and the arts. Like these commercial enterprises, NASA currently employs systems thinking and integrated design, but can benefit further by moving beyond its current practices, which are mostly driven by rigid engineering, technology, science, and project management considerations. At JPL’s Innovation Foundry and through the Solar System Mission Formulation Office, we broadened this paradigm by including HCD in the mission formulation workflow. Our goal was to create a proposal with improved clarity and appeal, thus helping our team to communicate its message and aid evaluators with their work. In this paper we provide examples and lessons learned from our recent proposal development effort using HCD. We discuss touch points where we infused non-linear designerly approaches and cybernetic circularity into the workflow. Implemented design topics include operational design for team building; process design throughout distinct phases of the proposal development and writing process; communication design for streamlined exchange of information within the team and to stakeholders; interaction design; graphic design; and creating boundary objects. While these approaches may feel new or foreign to SMEs and managers in the aerospace community, they produced significant benefits in this mission formulation effort. We will describe how such approaches can be used to broaden NASA’s technology-driven paradigm through design, thus creating an environment which fosters innovation, improved communication, and strategic advantage for proposers and their organizations.

Turner, Neal↗

Marine & hydrokinetic technology development.

The Wind and Water Power Program supports the development of marine and hydrokinetic devices, which capture energy from waves, tides, ocean currents, the natural flow of water in rivers, and marine thermal gradients, without building new dams or diversions. The program works closely with industry and the Department of Energy's national laboratories to advance the development and testing of marine and hydrokinetic devices. In 2008, the program funded projects to develop and test point absorber, oscillating wave column, and tidal turbine technologies. The program also funds component design, such as techniques for manufacturing and installing coldwater pipes critical for ocean thermal energy conversion (OTEC) systems. Rigorous device testing is necessary to validate and optimize prototypes before beginning full-scale demonstration and deployment. The program supports device testing by providing technology developers with information on testing facilities. Technology developers require access to facilities capable of simulating open-water conditions in order to refine and validate device operability. The program has identified more than 20 tank testing operators in the United States with capabilities suited to the marine and hydrokinetic technology industry. This information is available to the public in the program's Hydrodynamic Testing Facilities Database. The program also supports the development of open-water, grid-connected testing facilities, as well as resource assessments that will improve simulations done in dry-dock and closed-water testing facilities. The program has established two university-led National Marine Renewable Energy Centers to be used for device testing. These centers are located on coasts and will have open-water testing berths, allowing researchers to investigate marine and estuary conditions. Optimal array design, development, modeling and testing are needed to maximize efficiency and electricity generation at marine and hydrokinetic power plants while mitigating nearby and distant impacts. Activities may include laboratory and computational modeling of mooring design or research on device spacing. The geographies, resources, technologies, and even nomenclature of the U.S. marine and hydrokinetic technology industry have yet to be fully understood or defined. The program characterizes and assesses marine and hydrokinetic devices, and then organizes the collected information into a comprehensive and searchable Web-based database, the Marine and Hydrokinetic Technology Database. The database, which reflects intergovernmental and international collaboration, provides industry with one of the most comprehensive and up-to-date public resources on marine and hydrokinetic devices.

13 HYDRO ENERGY↗

Automated Optical Meteor Fluxes and Preliminary Results of Major Showers

NASA's Meteoroid Environment Office (MEO) recently established a two‐station system to calculate daily automated meteor fluxes in the millimeter‐size‐range for both single‐station and double‐station meteors. The cameras each consist of a 17 mm focal length Schneider lens (f/0.95) on a Watec 902H2 Ultimate CCD video camera, producing a 21.7x15.5 degree field of view. This configuration sees meteors down to a magnitude of +6. This paper outlines the concepts of the system, the hardware and software, and results of 3,000+ orbits from the first 18 months of operations. Video from the cameras are run through ASGARD (All Sky and Guided Automatic Real‐time Detection), which performs the meteor detection/photometry, and invokes MILIG and MORB (Borovicka 1990) codes to determine the trajectory, speed, and orbit of the meteor. A subroutine in ASGARD allows for approximate shower identification in single‐station detections. The ASGARD output is used in routines to calculate the flux. Before a flux can be calculated, a weather algorithm indicates if sky conditions are clear enough to calculate fluxes, at which point a limiting magnitude algorithm is employed. The limiting stellar magnitude is found using astrometry.net (Lang et al. 2012) to identify stars and translated to the corresponding shower and sporadic limiting meteor magnitude. It is found every 10 minutes and is able to react to quickly changing sky conditions. The extensive testing of these results on the Geminids and Eta Aquariids is shown. The flux involves dividing the number of meteors by the collecting area of the system, over the time interval for which that collecting area is valid. The flux algorithm employed here differs from others currently in use in that it does not make the gross oversimplication of choosing a single height to calculate the collection area of the system. In the MEO system, the volume is broken up into a set of height intervals, with the collecting areas determined by the position of the active shower or sporadic source radiant. The flux per height interval is calculated and summed to obtain the total meteor flux. Both single station and double station fluxes are currently found daily. Geminid fluxes on the peak night in 2012 (12‐14‐2012) were 0.058 meteors/km2/hr as found with double‐station meteors and 0.057 meteors/ km2/hr as found with single‐station meteors, to a limiting magnitude of +6.5. Both of those numbers are in agreement with the well‐calibrated fluxes from the Canadian Meteor Orbit Radar. Along with flux algorithms and initial flux results, presented will be results from the first 18 months of operation, covering 3,000+ meteoroid orbits.

Blaauw, R.↗

Improving seasonal precipitation forecasts in the Western United States through statistical downscaling

Abstract Seasonal precipitation forecasts in the western United States are critical resources for water resource management, especially during winter. While current seasonal forecasting systems provide monthly precipitation forecasts operationally, their coarse resolution limits their effectiveness in capturing the localized precipitation patterns and snowpack conditions essential for water resource managers in the mountainous regions. Here, analog statistical downscaling is demonstrated as an effective approach to enhance the spatial resolution of operational seasonal forecasts provided by the North American Multi-Model Ensemble. Downscaling was performed by building an analog ‘library’, in which corresponding model forecasts and observed values during the training period were stored. In the testing period, unseen model forecasts referenced the closest historical forecast from the analog library and applied the corresponding observational value for each point. This analysis indicates that downscaled products can capture localized features more accurately than the original coarse resolution forecasts, reducing forecast error across the western United States. Moreover, downscaling individual ensemble members—rather than downscaling the ensemble mean—further reduces forecasting error for their multi-model ensemble mean products. The greatest error reductions in the downscaled product, measured by root mean squared error (RMSE), were observed at low to mid-elevations (500–2000 meters), with 50%–70% improvement relative to the original forecasts. In the higher elevations (2000 meters and above), changes in RMSE relative to the original forecast were limited to 10%–30% improvements. The improvement is more substantial for forecast systems with 10 ensemble members compared to that with 4 members, but this relationship does not hold for the system with 24 ensemble members. These findings show that analog statistical downscaling can effectively address the spatial limitations of seasonal precipitation forecasts with minimal computational cost, providing a valuable framework for enhancing coarse resolution forecasting products while providing insights into the timing of ensemble mean calculations during the downscaling process.

Vernon, B. (ORCID:0009000891670689)↗

Thermal conductivity and theory of inelastic scattering of phonons by collective fluctuations

We study the intrinsic scattering of phonons by a general quantum degree of freedom, i.e., a fluctuating “field” Q, which may have completely general correlations, restricted only by unitarity and translational invariance. From the induced scattering rates, generalizing the model studied in a companion paper [Mangeolle et al., Phys. Rev. X 12, 041031 (2022)], we obtain the consequences on the thermal conductivity tensor of the phonons. We confirm that, even within our generalized model, the off-diagonal scattering rates involve a minimum of three- to four-point correlation functions of the Q fields, and we discuss the “semiclassical” versus “quantum” nature of all contributions. We obtain general and explicit forms for these correlations which isolate the contributions to the Hall conductivity, and we provide a general discussion of the implications of symmetry and equilibrium; this elaborates on, and extends, the results of Mangeolle et al. [Phys. Rev. X 12, 041031 (2022)]. We also extend the discussion and evaluation of these two- (diagonal scattering) and four-point correlation functions, and hence the thermal transport, for the illustrative example of an ordered two-dimensional antiferromagnet, where the Q field is a composite of magnon operators arising from spin-lattice coupling, and confirm numerically that the results, while satisfying all the necessary symmetry restrictions, lead to nonvanishing scattering and Hall effects. In particular, we investigate, both analytically and numerically, the dependence of such intrinsic scattering on a crucial parameter—the magnon to phonon velocity ratio v. We in particular confirm that within some range of v of order 1 the skew-scattering mechanism leads to comparable thermal Hall conductivity for thermal currents within and normal to the plane of the antiferromagnetism, and we discover that the temperature scaling of the longitudinal conductivity displays a threshold effect and a nonuniversal, continuous variation of the scaling exponent with v.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Projecting Future Energy Production from Operating Wind Farms in North America. Part II: Statistical Downscaling

Abstract Capacity factors (CFs) derived from daily expected power at 22 operating wind farms in different regions of North America are used as predictands to train statistical downscaling algorithms using output from ERA5. The statistical downscaling models are then used to make CF projections for a suite of CMIP6 Earth System Models (ESMs). Downscaling is performed using a hybrid statistical approach that employs synoptic types derived using k -means clustering applied to sea level pressure fields with variance corrections applied as a function of the pressure gradient intensity. ESMs exhibit marked variability in terms of the skill with which the frequency of synoptic types and pressure gradients are reproduced relative to ERA5, and that differential skill is used to infer differential credibility in the associated CF projections. Projections of median annual mean CF [P50(CF)] in each 20-yr period from 1980 to 2099 show evidence of declines at most wind farms except in parts of the southern Great Plains, although the magnitude of the changes is strongly dependent on the ESM. For example, P50(CF) in 2080–99 deviate from those in 1980–99 by from −3.1 to +0.2 percentage points in the Northeast. The largest-magnitude declines in P50(CF) ranging from −3.9 to −2 percentage points are projected for the southern West Coast. CF trends exhibit marked seasonality and are strongly linked to changes in the relative intensity of future synoptic patterns, with much less impact from shifts in the occurrence of synoptic types over time. Internal climate modes continue to play a significant role in inducing interannual variability in wind power production, even under high radiative forcing scenarios. Significance Statement We describe how future climate changes may affect wind resources and wind power generation. Near-term changes in projected wind power electricity generation potential at operating wind farms over North America are small, but by the end of the current century electricity production is projected to decrease in many areas but may increase in parts of the southern Great Plains. The amount of change in projected wind power production is a strong function of the Earth system model that is downscaled and also depends on the continued presence of internally forced climate variability. An additional dependence on the amount of greenhouse gas–induced global warming indicates the transition of the energy sector to low-carbon sources may assist in maintaining the abundant U.S. wind resource.

Meteorology & Atmospheric Sciences↗

Quantifying the Value of Hydropower in the Electric Grid: Final Report

The report summarizes research to Quantify the Value of Hydropower in the Electric Grid. This 3-year DOE study focused on defining value of hydropower assets in a changing electric grid. Methods are described for valuation and planning of pumped storage and conventional hydropower. The project team conducted plant case studies, electric system modeling, market analysis, cost data gathering, and evaluations of operating strategies and constraints. Five other reports detailing these research results are available a project website, www.epri.com/hydrogrid. With increasing deployment of wind and solar renewable generation, many owners, operators, and developers of hydropower have recognized the opportunity to provide more flexibility and ancillary services to the electric grid. To quantify value of services, this study focused on the Western Electric Coordinating Council region. A security-constrained, unit commitment and economic dispatch model was used to quantify the role of hydropower for several future energy scenarios up to 2020. This hourly production simulation considered transmission requirements to deliver energy, including future expansion plans. Both energy and ancillary service values were considered. Addressing specifically the quantification of pumped storage value, no single value stream dominated predicted plant contributions in various energy futures. Modeling confirmed that service value depends greatly on location and on competition with other available grid support resources. In this summary, ten different value streams related to hydropower are described. These fell into three categories; operational improvements, new technologies, and electricity market opportunities. Of these ten, the study was able to quantify a monetary value in six by applying both present day and future scenarios for operating the electric grid. This study confirmed that hydropower resources across the United States contribute significantly to operation of the grid in terms of energy, capacity, and ancillary services. Many potential improvements to existing hydropower plants were found to be cost-effective. Pumped storage is the most likely form of large new hydro asset expansions in the U.S. however, justifying investments in new pumped storage plants remains very challenging with current electricity market economics. Even over a wide range of possible energy futures, up to 2020, no energy future was found to bring quantifiable revenues sufficient to cover estimated costs of plant construction. Value streams not quantified in this study may provide a different cost-benefit balance and an economic tipping point for hydro. Future studies are essential in the quest to quantify the full potential value. Additional research should consider the value of services provided by advanced storage hydropower and pumped storage at smaller time steps for integration of variable renewable resources, and should include all possible value streams such as capacity value and portfolio benefits i.e.; reducing cycling on traditional generation.

13 HYDRO ENERGY↗

Tris (isodecyl) guanidine degradation in the MCU system

The current solvent blend consists of four components; an extractant, the modifier, a suppressor, and the diluent. Of the four components, only the suppressor – tris(isodecyl)guanidine (TiDG) has exhibited an appreciable depletion rate during facility operations.∇ Using data derived from MCU process samples, SRNL derived a method to predict the TiDG depletion based upon time and volume of feed processed. With the current data set, the following formula can estimate the TiDG concentrations after processing: A t = [A 0 ×exp(-0.000900×t)] – [5.39E-06×volume] where A t is the TiDG concentration (mM) at time t (days), A 0 is the TiDG concentration (mM) at time = 0, and volume is the amount of salt solution processed in gallons from time 0 to time t. The ability to use this formula as a predictive tool is limited due to the number of data points obtained for this scope of work. As such, this formula should not be used to precisely predict future TiDG concentrations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Manned Space-laboratories Control Center (MSCC) operations concept

The initiation of the (German-) nationally funded control center for manned spaceflight operations triggered by the invitation of President Reagan to ESA, Japan, and Canada in 1984 to join the International Space Station Freedom Program is recalled. The requirements for a Manned Space-Laboratories Control Center (MSCC) as defined at the beginning of the planning and construction process in 1987 and the resulting modifications during the various programmatic scenario changes on NASA and ESA side between 1987 and now are presented. The validity of the original requirements with respect to the current scenario, which asks for a logical evolution from the execution of the D-2 mission in January 1993 via the European Columbus Precursor flights (in particular the E-1 mission) towards Columbus Attached Laboratory (APM)-operations by the end of this century are discussed. The resulting tasks of the MSCC for the various missions, the current configuration, and the ensuing operations concept leading from a more centralized concept for D-2 towards a decentralized payload operations concept for the APM and the implications with respect to European and International interfaces are presented. The planned Columbus MSCC facility architecture and its expected modifications introduced by the ESA Ministerial Conference in Munich (Nov. 1991) and follow-on discussions are briefly addressed. The last chapter outlines the planned services to be provided by the MSCC to the decentralized User (experimenter) community. Issues like decentralized mission planning on executional level, command validation, data flow coordination, archiving services, and telescience capabilities are highlighted from a MSCC point of view.

Kehr, Joachim↗

Recent Progress with the JWST Observatory

The James Webb Space Telescope (JWST) is a large aperture (6.5 meter), cryogenic space telescope with a suite of near and mid-infrared instruments covering the wavelength range of 0.6 micrometers - 28 micrometers. JWST's primary science goal is to detect and characterize the first galaxies. It will also study the assembly of galaxies, star formation, and the formation of evolution of planetary systems. JWST is a segmented mirror telescope operating at (is) approximately 40K, a temperature achieved by passive cooling of the observatory, via a large, 5-layer membrane-based sunshield. We present an overview of the observatory systems design, the science instruments and the mission science objectives. With the completion of the Spacecraft Critical Design Review, the spacecraft has also fully transitioned to fabrication. We will discuss recent highlights associated with the Observatory, including completion and delivery of the primary mirror segments, delivery of the primary mirror backplane and its wings, and the delivery of five template membrane layers. We will also summarize the current predicted performance of the telescope, including stray light, pointing and image quality following the completion of the final design review. Finally, the current schedule through to launch will be presented with a summary of integration and test activities planned when the science payload is delivered to Northrop Grumman following cryo-optical testing at the Johns Space Flight Center.

James Webb Space Telescope (JWST)↗

On-Orbit Cryogenic Refueling: Potential Mission Benefits, Associated Orbital Mechanics, and Fuel Transfer Thermodynamic Modeling Efforts

The placement of cryogenic fuel/propellant depot stations in Earth orbit has the potential to transform the nature and operations for many types of spaceflight missions. Today, spaceflight missions are almost universally required to carry the entire amount of fuel required for the mission, for the entire duration of the mission, from the point of launch. This is the rough equivalent of making a drive from Ohio to California, requiring the traveler to bring along the total sum of gasoline required for the entire trip, without being able to ‘fill-up’ anywhere along the route. Obviously, this framework of travel greatly encumbers the breadth, scope, and efficiency of potential journeys. Cryogenic fuel/propellant depots have not been implemented because many technical, operational, and engineering challenges still exist. These must be overcome prior to the placement of usable on-orbit propellant depots. This thesis investigates three specific engineering challenges related to on-orbit propellant depots, and presents the current state, technological challenges, and ultimate benefits of on-orbit cryogenic refueling.

No vent fill↗

Diagnosing lepton-nonuniversality in b → sℓℓ

Ratios of branching fractions of semileptonic B decays, (B→Hμμ) over (B→Hee) with H=K, K*,X s , K 0 (1430),$\phi$,… are sensitive probes of lepton universality. In the Standard Model, the underlying flavor changing neutral current process b→sℓℓ is lepton flavor universal. However models with new flavor violating physics above the weak scale can give substantial non-universal contributions. The leading contributions from such new physics can be parametrized by effective dimension six operators involving left- or right-handed quarks. We show that in the double ratios R X s /R K , R K* /R K and R $\phi$ /R K the dependence on new physics coupling to left-handed quarks cancels out. Thus a measurement of any of these double ratios is a clean probe of flavor nonuniversal physics coupling to right-handed quarks. We also point out that the observables R X s , R K* , R K 0(1430) and R$\phi$ depend on the same combination of Wilson coefficients and therefore satisfy simple consistency relations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Automatic voltage regulation application for PV inverters in low-voltage distribution grids – A digital twin approach

This paper proposes a hierarchical coordinated control strategy for PV inverters to keep voltages in low-voltage (LV) distribution grids within specified limits. The top layer of the proposed architecture consists of the designed automatic voltage regulation (AVR) application, which has access to voltage measurements and grid parameters from the LV distribution grid, both current and historical. The AVR application solves a constrained optimization problem, which provides a set of local control set-points that bring the voltage across the grid within bounds. The middle layer consists of a local Volt/VAR controller, which is adjusted by the AVR app, while the bottom layer is the inner-loop controller of the PV inverter. The proposed method not only improves the voltage quality in the grid but also manages the reactive power outputs of PV inverters efficiently. Further, a digital twin of the cyber-physical system has also been employed that interacts with the control system to ensure its appropriate operation. The effectiveness of the proposed methodology is demonstrated on a representative low-voltage feeder located in Denmark.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Electron stripping processes of H{sup −} ion beam in the 80 kV high voltage extraction column and low energy beam transport line at LANSCE

Basic vacuum calculations were performed for various operating conditions of the Los Alamos National Neutron Science H{sup −} Cockcroft-Walton (CW) injector and the Ion Source Test Stand (ISTS). The vacuum pressure was estimated for both the CW and ISTS at five different points: (1) inside the H{sup −} ion source, (2) in front of the Pierce electrode, (3) at the extraction electrode, (4) at the column electrode, and (5) at the ground electrode. A static vacuum analysis of residual gases and the working hydrogen gas was completed for the normal ion source working regime. Gas density and partial pressure were estimated for the injected hydrogen gas. The attenuation of H{sup −} beam current and generation of electron current in the high voltage acceleration columns and low energy beam transport lines were calculated. The interaction of H{sup −} ions on molecular hydrogen (H{sub 2}) is discussed as a dominant collision process in describing electron stripping rates. These results are used to estimate the observed increase in the ratio of electrons to H{sup −} ion beam in the ISTS beam transport line.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

First-ever deployment of a SiPM-on-tile calorimeter in a collider: a parasitic test with 200 GeV p p collisions at RHIC.

We describe the testing of a prototype SiPM-on-tile iron-scintillator calorimeter at the Relativistic Heavy Ion Collider (RHIC) during its 200 GeV p p run in 2024. The prototype, measuring 20 × 20 cm 2 and 24 radiation lengths in depth, was positioned in the STAR experimental hall, approximately 8 m from the interaction point and 65 cm from the beam line, covering a pseudorapidity range of about 3.1 < η < 3.4. By using the dark current of a reference SiPM as a radiation monitor, we estimate that the prototype was exposed to a fluence of about 10 10 1-MeV n eq /cm 2 . Channel-by-channel calibration was performed in a data-driven way with the signature from minimum-ionizing particles during beam-on conditions. AGeant4 detector simulation, with inputs from thePythia8 event generator, describes measurements of energy spectra and hit multiplicities reasonably well. These results mark the first deployment, commissioning, calibration, and long-term operation of a SiPM-on-tile calorimeter in a collider environment. This experimental campaign will guide detector designs and operational strategies for the ePIC detector at the future EIC, as well as other applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗