Results for “experimental data analysis” — Page 78

NASA NTRS1985

Impact resistance of fiber composites - Energy-absorbing mechanisms and environmental effects

Energy absorbing mechanisms were identified by several approaches. The energy absorbing mechanisms considered are those in unidirectional composite beams subjected to impact. The approaches used include: mechanic models, statistical models, transient finite element analysis, and simple beam theory. Predicted results are correlated with experimental data from Charpy impact tests. The environmental effects on impact resistance are evaluated. Working definitions for energy absorbing and energy releasing mechanisms are proposed and a dynamic fracture progression is outlined. Possible generalizations to angle-plied laminates are described.

Chamis, C. C.↗

NASA NTRS1985

A method for determining acoustic-liner admittance in ducts with sheared flow in two-cross-sectional directions

A method is developed for determining the acoustic admittance of a test liner installed in the wall of a grazing flow impedance tube. The mean flow is permitted flow gradients in both cross-sectional directions of the tube. The unknown admittance value is obtained by solving an eigenvalue problem. This eigenvalue problem results from the application of the finite-element method to the partial differential equation and boundary conditions governing the acoustic field. The credibility of the method is established by comparing results with exact solutions obtained for a constant mean-flow profile and with previous results for cases involving shear in only one cross-sectional direction. Excellent comparisons are obtained in both cases. The analysis is used in conjunction with a limited amount of experimental data and shows that the flow must be accurately modeled in order to determine the acoustic-liner properties.

Watson, W. R.↗

NASA NTRS1991

Analysis of polarization properties of shallow metallic gratings by an extended Rayleigh-Fano theory

Rayleigh-Fano theory has been extended for the purpose of calculating the polarization anomaly of a grating having shallow grooves and finite conductivity. Simple analytic formulas are derived for predicting the position and the appearance of the anomalies. Phenomenological explanations are given to the origin of the anomalies. The validity of our analysis is examined by comparing computed degree of polarization with experimental data obtained in the visible region for Al-, Ag-, and Au-coated blazed gratings.

Koike, Masato↗

NASA NTRS1993

A Navier-Stokes solver for turbomachinery applications

A computer code for solving the Reynolds-averaged full Navier-Stokes equations has been developed and applied using H- and C-type grids. The Baldwin-Lomax eddy-viscosity model is used for turbulence closure. The integration in time is based on an explicit four-stage Runge-Kutta scheme. Local time stepping, variable coefficient implicit residual smoothing, and a full multigrid method have been implemented to accelerate steady-state calculations. A grid independence analysis is presented for a transonic rotor blade. Comparisons with experimental data show that the code is an accurate viscous solver and can give very good blade-to-blade predictions for engineering applications.

Arnone, A.↗

NASA NTRS1948

Velocity distributions on two-dimensional wing-duct inlets by conformal mapping

The conformal-mapping method of the Cartesian mapping function is applied to the determination of the velocity distribution on arbitrary two-dimensional duct-inlet shapes such as are used in wing installations. An idealized form of the actual wing-duct inlet is analyzed. The effects of leading edge stagger, inlet-velocity ratio, and section lift coefficients on the velocity distribution are included in the analysis. Numerical examples are given and, in part, compared with experimental data.

Perl, W↗

NASA NTRS1999

Preliminary Statistical Analysis of the 1995 Evaluation by NASA LaRC of the IAI Automatic Balance Calibration Machine

The NASA Langley Research Center (LARC) participated in a national cooperative evaluation of the Israel Aircraft Industries (IAI) automatic balance calibration machine at Microcraft, San Diego in September 1995. A LaRC-designed six-component strain gauge balance was selected for test and calibration during LaRC's scheduled evaluation period. Eight calibrations were conducted using three selected experimental designs. Raw data were exported to LaRC facilities for reduction and statistical analysis using the techniques outlined in Tripp and Tcheng (1994). This report presents preliminary assessments of the results, and compares IAI calibration results with manual calibration results obtained at the Modern Machine and Tool Co., Inc. (MM & T). Newport News, VA. A more comprehensive report is forthcoming.

Tcheng, Ping↗

NASA NTRS2002

Wave Journal Bearings Under Dynamic Loads

The dynamic behavior of the wave journal bearing was determined by running a three-wave bearing with an eccentrically mounted shaft. A transient analysis was developed and used to predict numerical data for the experimental cases. The three-wave journal bearing ran stably under dynamic loads with orbits well inside the bearing clearance. The orbits were almost circular and nearly free of the influence of, but dynamically dependent on, bearing wave shape. Experimental observations for both the absolute bearing-housing-center orbits and the relative bearing-housing-center-to-shaft-center orbits agreed well with the predictions. Moreover, the subsynchronous whirl motion generated by the fluid film was found experimentally and predicted theoretically for certain speeds.

Hendricks, Robert C.↗

NASA NTRS2008

Ferroelectric Field-Effect Transistor Differential Amplifier Circuit Analysis

There has been considerable research investigating the Ferroelectric Field-Effect Transistor (FeFET) in memory circuits. However, very little research has been performed in applying the FeFET to analog circuits. This paper investigates the use of FeFETs in a common analog circuit, the differential amplifier. The two input Metal-Oxide-Semiconductor (MOS) transistors in a general MOS differential amplifier circuit are replaced with FeFETs. Resistors are used in place of the other three MOS transistors. The FeFET model used in the analysis has been previously reported and was based on experimental device data. Because of the FeFET hysteresis, the FeFET differential amplifier has four different operating modes depending on whether the FeFETs are positively or negatively polarized. The FeFET differential amplifier operation in the different modes was analyzed by calculating the amplifier voltage transfer and gain characteristics shown in figures 2 through 5. Comparisons were made between the FeFET differential amplifier and the standard MOS differential amplifier. Possible applications and benefits of the FeFET differential amplifier are discussed.

Phillips, Thomas A.↗

NASA NTRS1959

Analysis of Turbulent Flow and Heat Transfer in Noncircular Passages

Previous work on turbulent heat transfer and flow in tubes was generalized and applied to flow in non-circular passages of equilateral triangular and square cross section. Expressions for eddy diffusivity that had been verified for flow and heat transfer in tubes were assumed to apply in general along lines normal to a wall. Velocity distributions, wall shear-stress distributions, and friction factors, as well as wall heat-transfer distributions, wall temperature distributions, and average heat-transfer coefficients were calculated. In addition, results from a previous analysis for axial flow between rods were compared with new experimental data. For calculating wall temperature distributions, uniform heat generation in the passage wall and uniform heat transfer at the outer surface were assumed. The application of the results is restricted to moderately small peripheral wall temperature variations. Calculations were made for Reynolds numbers from 20,000 to 900,000 and Prandtl numbers from 0.73 to 300. Results show that velocities, shear stresses, and heat transfer in the region near the corner were lower than average values and were zero at the corner. Friction factors and average Nusselt numbers were lower than in a tube.

Taylor, Maynard F.↗

NASA NTRS2016

Normalized Temperature Contrast Processing in Infrared Flash Thermography

The paper presents further development in normalized contrast processing used in flash infrared thermography method. Method of computing normalized image or pixel intensity contrast, and normalized temperature contrast are provided. Methods of converting image contrast to temperature contrast and vice versa are provided. Normalized contrast processing in flash thermography is useful in quantitative analysis of flash thermography data including flaw characterization and comparison of experimental results with simulation. Computation of normalized temperature contrast involves use of flash thermography data acquisition set-up with high reflectivity foil and high emissivity tape such that the foil, tape and test object are imaged simultaneously. Methods of assessing other quantitative parameters such as emissivity of object, afterglow heat flux, reflection temperature change and surface temperature during flash thermography are also provided. Temperature imaging and normalized temperature contrast processing provide certain advantages over normalized image contrast processing by reducing effect of reflected energy in images and measurements, therefore providing better quantitative data. Examples of incorporating afterglow heat-flux and reflection temperature evolution in flash thermography simulation are also discussed.

Koshti, Ajay M.↗

NASA NTRS2016

A Method to Measure and Estimate Normalized Contrast in Infrared Flash Thermography

The paper presents further development in normalized contrast processing used in flash infrared thermography method. Method of computing normalized image or pixel intensity contrast, and normalized temperature contrast are provided. Methods of converting image contrast to temperature contrast and vice versa are provided. Normalized contrast processing in flash thermography is useful in quantitative analysis of flash thermography data including flaw characterization and comparison of experimental results with simulation. Computation of normalized temperature contrast involves use of flash thermography data acquisition set-up with high reflectivity foil and high emissivity tape such that the foil, tape and test object are imaged simultaneously. Methods of assessing other quantitative parameters such as emissivity of object, afterglow heat flux, reflection temperature change and surface temperature during flash thermography are also provided. Temperature imaging and normalized temperature contrast processing provide certain advantages over normalized image contrast processing by reducing effect of reflected energy in images and measurements, therefore providing better quantitative data. Examples of incorporating afterglow heat-flux and reflection temperature evolution in flash thermography simulation are also discussed.

Koshti, Ajay M.↗

NASA NTRS2018

CFD Predictions of N+3 Cycle Emissions for a Three-Cup Gas-Turbine Combustor

The National Combustion Code (OpenNCC) was used to perform non-reacting and two-phase reacting flow computations for a unique pre-filming type LDI-3 fuel injector for a three-cup, nineteen-element flametube configuration. All computations were performed with a consistent approach of mesh-generation, spray modeling, reduced finite-rate kinetics and turbulence-chemistry interaction, as developed for CFD analysis of single-element and multi-element LDI-3 designs with OpenNCC. Emissions and flowfield characteristics were predicted for a generic NASA N+3 engine cycle, with particular focus on the 7% and 30% ICAO power operating conditions. For both the conditions studied, the CFD analysis provided very good predictions for EINOx when compared with experimental data measured at NASA Glenn Research Center.

injectors↗

DOE OSTI2023

The AXEAP2 program for K β X-ray emission spectra analysis using artificial intelligence

The processing and analysis of synchrotron data can be a complex task, requiring specialized expertise and knowledge. Our previous work addressed the challenge of X-ray emission spectrum (XES) data processing by developing a standalone application using unsupervised machine learning. However, the task of analyzing the processed spectra remains another challenge. Although the non-resonant K β XES of 3 d transition metals are known to provide electronic structure information such as oxidation and spin state, finding appropriate parameters to match experimental data is a time-consuming and labor-intensive process. Here, a new XES data analysis method based on the genetic algorithm is demonstrated, applying it to Mn, Co and Ni oxides. This approach is also implemented as a standalone application, Argonne X-ray Emission Analysis 2 ( AXEAP2 ), which finds a set of parameters that result in a high-quality fit of the experimental spectrum with minimal intervention. AXEAP2 is able to find a set of parameters that reproduce the experimental spectrum, and provide insights into the 3 d electron spin state, 3 d –3 p electron exchange force and K β emission core-hole lifetime.

36 MATERIALS SCIENCE↗

NASA NTRS1995

Millimeter and Submillimeter Spectroscopy of Molecules of Atmospheric Importance

In our proposal we laid out work in three areas of relevance to atmospheric science: millimeter and submillimeter spectroscopy, variable temperature pressure broadening, and band and intensity measurements in the FIR. Below we will briefly discuss our progress during the second year of this project. In our millimeter and submillimeter (mm/submm) spectroscopic work, one of our goals has been to work towards the unification of the rotational (primarily obtained by mm/submm techniques) and rotational-vibrational (primarily obtained by infrared techniques) data sets in the context of theoretically well founded models which take advantage of the strengths of the data from each experimental technique. From the point of view of the development of the optimal data base for atmospheric observations, this is clearly a desirable goal. During the first year of this project we did an analysis of a weighted, mixed infrared and mm/submm data set of the n = 0, 1, and 2 torsional states of the ground vibrational state of HOOH. The purpose of this work is to provide a unified understanding of the spectrum, which is applicable in both the rotational and rotational - vibrational regimes. We have succeed in doing this in the context of a single weighted fit which accounts for both data sets to their respective experimental uncertainty (-0.1 and 10 MHz, respectively). Additionally, we have now done a similar analysis on the n = 0 torsional state of v(sub 3) and begun a similar analysis on v(sub 6). For several years we have been working on the mm/submm rotational spectra of the many excited vibrational states of HNO3, again with particular emphasis on the relationships between the mm/submm and infrared spectra. During the first year of this project we were able to use mm/submm spectroscopy to fully resolve the torsional splittings in 2 v(sub 9) and v(sub 5), establish a theoretically well founded quantitative relation between them, and show that both have their physical origin in the torsional motion of the v(sub 9) mode.This result has now been incorporated in a recent reanalysis of the infrared spectrum and has resulted in improved fits - eliminating what was in retrospect a systematic error associated with this previously unknown effect.

DeLucia, Frank C.↗

NASA NTRS1988

Interfacial adhesion: Theory and experiment

Adhesion, the binding of different materials at an interface, is of general interest to many branches of technology, e.g., microelectronics, tribology, manufacturing, construction, etc. However, there is a lack of fundamental understanding of such diverse interfaces. In addition, experimental techniques generally have practical objectives, such as the achievement of sufficient strength to sustain mechanical or thermal effects and/or have the proper electronic properties. In addition, the theoretical description of binding at interfaces is quite limited, and a proper data base for such theoretical analysis does not exist. This presentation will review both experimental and theoretical aspects of adhesion in nonpolymer materials. The objective will be to delineate the critical parameters needed, governing adhesion testing along with an outline of testing objectives. A distinction will be made between practical and fundamental objectives. Examples are given where interfacial bonding may govern experimental consideration. The present status of theory is presented along wiith recommendations for future progress and needs.

Ferrante, John↗

NASA NTRS1988

Interfacial adhesion - Theory and experiment

Adhesion, the binding of different materials at an interface, is of general interest to many branches of technology, e.g., microelectronics, tribology, manufacturing, construction, etc. However, there is a lack of fundamental understanding of such diverse interfaces. In addition, experimental techniques generally have practical objectives, such as the achievement of sufficient strength to sustain mechanical or thermal effects and/or have the proper electronic properties. In addition, the theoretical description of binding at interfaces is quite limited, and a proper data base for such theoretical analysis does not exist. This presentation will review both experimental and theoretical aspects of adhesion in nonpolymer materials. The objective will be to delineate the critical parameters needed, governing adhesion testing along with an outline of testing objectives. A distinction will be made between practical and fundamental objectives. Examples are given where interfacial bonding may govern experimental consideration. The present status of theory is presented along with recommendations for future progress and needs.

Ferrante, John↗

NASA NTRS1993

Analysis of the Harrier forebody/inlet design using computational techniques

Under the support of this Cooperative Agreement, computations of transonic flow past the complex forebody/inlet configuration of the AV-8B Harrier II have been performed. The actual aircraft configuration was measured and its surface and surrounding domain were defined using computational structured grids. The thin-layer Navier-Stokes equations were used to model the flow along with the Chimera embedded multi-grid technique. A fully conservative, alternating direction implicit (ADI), approximately-factored, partially flux-split algorithm was employed to perform the computation. An existing code was altered to conform with the needs of the study, and some special engine face boundary conditions were developed. The algorithm incorporated the Chimera technique and an algebraic turbulence model in order to deal with the embedded multi-grids and viscous governing equations. Comparison with experimental data has yielded good agreement for the simplifications incorporated into the analysis. The aim of the present research was to provide a methodology for the numerical solution of complex, combined external/internal flows. This is the first time-dependent Navier-Stokes solution for a geometry in which the fuselage and inlet share a wall. The results indicate the methodology used here is a viable tool for transonic aircraft modeling.

Chow, Chuen-Yen↗

DOE OSTI2020

Optimization of Energy Flow through Synthetic Metabolic Modules and Regulatory Networks in a Model Photosynthetic Eukaryotic Microbe

Photosynthetic organisms have recently gained considerable attention for a role in development of renewable energy sources. Genome-enabled systems biology methods, coupled with functional and synthetic genomics, present opportunities to develop sustainable and economical applications such as fuel production within the next 10 to 15 years. However, optimization of light-driven metabolism for biomass or biofuel production will require a detailed systems biology understanding of photosynthetic processes and cellular metabolism. Genome-scale metabolic models (GEMs) are at the core of systems analysis of cellular processes and form a common organizational framework for analyses of data resulting from functional genomics experimental work and computational studies. Therefore, there is a clear demand for high quality photosynthetic model organisms and the appropriate computational tools that enable systems analysis of light-driven metabolism. Through research conducted we expanded the currently available repertoire of photosynthetic GEMs to include the commercially valuable model diatom Phaeoctylum tricornutum. Diatoms have a peculiar and distinct evolutionary footprint and represent a major eukaryotic lineage that is taxonomically and functionally distinct from green and red algae and vascular plants. Therefore, the true potential for light-driven metabolism aimed at biofuel production remains poorly understood at a systems level for a large subset of the global diversity of photosynthetic organisms. The metabolic capabilities of P. tricornutum were comparatively modeled with those from other photosynthetic groups in order to elucidate the occurrence of metabolic traits within and between phototrophs. Additionally, this research resulted in significant extension of the COnstraints Based Reconstruction and Analysis (COBRA) Toolbox to accommodate the crucial need for infrastructure required for ‘omics data integration and analysis in the context of genome-scale models. Therefore, the proposed research achieved two important goals. First, within the broad scope of photosynthetic organisms, we functionally compared and, as a result, identified cellular processes that require optimization in order to enable deployment as biofuel feedstock. Second, the proposed research resulted in development of key computational infrastructure, which can be further extended to other biological systems, that is currently lacking but necessary for multiple ‘omics data integration.

59 BASIC BIOLOGICAL SCIENCES↗