Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase problem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Titanium Melting Curve: Data Consistency Assessment, Problems and Achievements

Experimental data for the thermodynamic properties of titanium on the melting curve in the pressure range from atmospheric value to 90 GPa are analyzed and brought into correspondence. The problems that have been considered are (i) the lack of data for the solid β-phase density near the normal melting point and (ii) the formation probability of a triple point on the melting curve for the coexisting β-, ω-, and liquid phases of titanium. To estimate the change of the volume upon melting 3d elements from Mendeleev’s periodic system, a correlation between the change of the volume, ΔV{sub m}, and the change of the entropy, ΔS{sub m}, on the melting curve at atmospheric pressure is suggested and effectively used.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reversible simulations of elastic collisions

Consider a system of N identical hard spherical particles moving in a d-dimensional box and undergoing elastic, possibly multi-particle, collisions. We develop a new algorithm that recovers the pre-collision state from the post-collision state of the system, across a series of consecutive collisions, \textit{with essentially no memory overhead}. The challenge in achieving reversibility for an n-particle collision (where, in general, n<< N) arises from the presence of nd-d-1 degrees of freedom (arbitrary angles) during each collision, as well as from the complex geometrical constraints placed on the colliding particles. To reverse the collisions in a traditional simulation setting, all of the particular realizations of these degrees of freedom (angles) during the forward simulation must be tracked. This requires memory proportional to the number of collisions, which grows very fast with N and d, thereby severely limiting the \textit{de facto} applicability of the scheme. This limitation is addressed here by first performing a pseudo-randomization of angles, which ensures determinism in the reverse path for any values of n and d. To address the more difficult problem of geometrical and dynamic constraints, a new approach is developed which correctly samples the constrained phase space. Upon combining the pseudo-randomization with correct phase space sampling, perfect reversibility of collisions is achieved, as illustrated for n<=3, d=2, and n=2, d=3. This result enables, for the first time, reversible simulations of elastic collisions with essentially zero memory accumulation. In principle, the approach presented here could be generalized to larger values of n, which would be of definite interest for molecular dynamics simulations at high densities.

Perumalla, Kalyan S.↗

Reference solutions for linear radiation transport: the Hohlraum and Lattice Benchmarks

Radiation transport describes the propagation of energetic particles through space as they interact with a surrounding material medium. In a kinetic description, radiation transport is modeled by a radiation transport equation (RTE) that prescribes the density of the radiation in position-momentum phase space. The purpose of this dataset is to provide highly resolved solutions to two benchmark problems. These two benchmarks do not possess exact solutions; moreover, the construction of a manufactured solution may require a non-physical source that is not desirable, especially if it spoils the physical nature of the solution. Thus the goal of this computational study is to provide a highly resolved reference solution for testing newer, more cost efficient methods that are currently being developed in the research community.

97 MATHEMATICS AND COMPUTING↗

Miniaturized Air-to-Refrigerant Heat Exchangers

Air-to-refrigerant Heat eXchangers (HX) are an essential component of Heating, Ventilation, Air-Conditioning, and Refrigeration (HVAC&R) systems, serving as the main heat transfer component. The major limiting factor to HX performance is the large airside thermal resistance. Recent literature aims at improving heat transfer performance by utilizing enhancement methods such as fins and small tube diameters; this has lead to almost exhaustive research on the microchannel HX (MCHX). The objective of this project is to develop a miniaturized air-to-refrigerant HX with at least 20% reduction in volume, material volume, and approach temperature compared to current state-of-the-art multiport flat tube designs and also be capable of production within five years. Moreover, the proposed HX’s are expected to have good water drainage and should succeed in both evaporator and condenser applications. The project leveraged Parallel-Parametrized Computational Fluid Dynamics (PPCFD) and Approximation-Assisted Optimization (AAO) techniques to perform multi-scale analysis and shape optimization with the intent of developing novel HX designs whose thermal-hydraulic performance exceeds that of state-of-the-art MCHX. Nine heat exchanger geometries were initially chosen for detailed analysis, selected from 35+ geometries which were identified in previous work at the University of Maryland, College Park. The newly developed optimization framework was exercised for three design optimization problems: (DP I) 1.0kW radiator, (DP II) 10kW radiator and (DP III) 10kW two-phase HX. DP I consisted of the design and optimization of 1.0kW air-to-water HX’s which exceeded the project requirements of 20% volume/material reduction and 20% better performance. Two prototypes for the 1.0kW HX were prototyped, tested and validated using newly-designed airside and refrigerant side test facilities. DP II, a scaled version DP I for 10kW air-to-water HX applications, also yielded optimized HX designs which met project requirements. Attempts to prototype a 10kW have presented unique manufacturing challenges, especially regarding tube blockages and structural stability. DP III comprised optimizing two-phase HX’s for a 3.0Ton capacity in a heat pump / air-conditioning unit for cooling mode application using R410A as the working fluid. The HX’s theoretically address the project requirements. System-level analysis showed the HX’s achieved up to 15% improvement in COP while also reducing overall unit charge by 30-40%. The project methodology was capable of developing HX’s which can outperform current state-of-the-art MCHX by at least 20% reduction in volume, material volume, and approach temperature. Additionally, the capability for optimization using refrigerant charge as an objective function was developed. The five-year manufacturing feasibility of the proposed HX’s was shown to have a good outlook. Successful prototyping through both conventional manufacturing methods and next generation methods such as additive manufacturing was achieved.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Overview of lower length scale model development for accident tolerant fuels regarding U 3 Si 2 fuel and FeCrAl cladding

U 3 Si 2 and FeCrAl have been proposed as fuel and cladding concepts, respectively, for accident tolerance fuels with higher tolerance to accident scenarios compared to UO 2 . However, a lot of key physics and material properties regarding their in-pile performance are yet to be explored. To accelerate the understanding and reduce the cost of experimental studies, multiscale modeling and simulation are used to develop physics-based materials models to assist engineering scale fuel performance modeling. In this report, the lower-length-scale efforts in method and material model development supported by the Accident Tolerance Fuel (ATF) high-impact-problem (HIP) under the NEAMS program are summarized. Significant progresses have been made regarding interatomic potential, phase field models for phase decomposition and gas bubble formation, and thermal conductivity for U 3 Si 2 fuel, and precipitation in FeCrAl cladding. The accomplishments are very useful by providing atomistic and mesoscale tools, improving the current understanding, and delivering engineering scale models for these two ATF concepts.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Riverine Plastic Pollution: Field Sampling Protocol and Implementation in U.S. Rivers

Riverine plastic pollution is increasingly being recognized as a serious environmental concern. The flux of plastic from U.S. rivers into the oceans is estimated to be on the order of hundreds of tons per year. Plastic pollution has been detected in all major U.S. rivers but the observations did not measure metrics that could be used for mass flux calculations. The Department of Energy is addressing the problem of riverine plastic pollution with the Waterborne Plastics Resource Assessment and Debris Characterization (WaterPACT) project. Phase one of the WaterPACT project includes the development of a sampling protocol, field sampling events that implement the protocol, and numerical modeling studies. The field sampling will quantify and characterize the plastic pollution and the numerical modeling studies will analyze the movement of the plastic pollution by rivers. This report details the WaterPACT sampling protocol and its implementation in four major U.S. rivers. The WaterPACT sampling protocol was implemented in the Mississippi, Columbia, Delaware, and Los Angeles rivers with at least three sampling events in each river. The rivers represent four types ranging from the large Mississippi with its vast agricultural watershed to the small Los Angeles with its highly engineered urban waterway. The three sampling events covered a variety of discharge conditions from low drought flow to extreme storm events. The data obtained by the WaterPACT sampling of the four rivers will be combined to provide an invaluable dataset to researchers studying the source and chemical composition of plastic pollution and modelers estimating the flux of plastic being transported to and released into the oceans.

13 HYDRO ENERGY↗

Assessing the Dynamics and Complexity of Disease Pathogenicity Using 4-Dimensional Immunological Data

Investigating disease pathogenesis and personalized prognostics are major biomedical needs. Because patients sharing the same diagnosis can experience different outcomes, such as survival or death, physicians need new personalized tools, including those that rapidly differentiate several inflammatory phases. To address these topics, a pattern recognition-based method (PRM) that follows an inverse problem approach was designed to assess, in <10 min, eight concepts: synergy , pleiotropy , complexity , dynamics , ambiguity , circularity , personalized outcomes , and explanatory prognostics (pathogenesis). By creating thousands of secondary combinations derived from blood leukocyte data, the PRM measures synergic, pleiotropic, complex and dynamic data interactions, which provide personalized prognostics while some undesirable features—such as false results and the ambiguity associated with data circularity-are prevented. Here, this method is compared to Principal Component Analysis (PCA) and evaluated with data collected from hantavirus-infected humans and birds that appeared to be healthy. When human data were examined, the PRM predicted 96.9 % of all surviving patients while PCA did not distinguish outcomes. Demonstrating applications in personalized prognosis, eight PRM data structures sufficed to identify all but one of the survivors. Dynamic data patterns also distinguished survivors from non-survivors, as well as one subset of non-survivors, which exhibited chronic inflammation. When the PRM explored avian data, it differentiated immune profiles consistent with no, early, or late inflammation. Yet, PCA did not recognize patterns in avian data. Findings support the notion that immune responses, while variable, are rather deterministic: a low number of complex and dynamic data combinations may be enough to, rapidly, unmask conditions that are neither directly observable nor reliably forecasted.

60 APPLIED LIFE SCIENCES↗

Quantitative hard x-ray phase contrast imaging of micropipes in SiC

Peculiarities of quantitative hard x-ray phase contrast imaging of micropipes in SiC are discussed. The micropipe is assumed as a hollow cylinder with an elliptical cross section. The major and minor diameters can be restored using the least square fitting procedure by comparing the experimental data, i.e. the profile across the micropipe axis, with those calculated based on phase contrast theory. It is shown that one projection image gives an information which does not allow a complete determination of the elliptical cross section, if an orientation of micropipe is not known. Another problem is a weak accuracy in estimating the diameters, partly because of using pink synchrotron radiation, which is necessary because a monochromatic beam intensity is not sufficient to reveal the weak contrast from a very small object. The general problems of accuracy in estimating the two diameters using the least square procedure are discussed. Two experimental examples are considered to demonstrate small as well as modest accuracies in estimating the diameters.

36 MATERIALS SCIENCE↗

A monolithic mass tracking formulation for bubbles in incompressible flow

We devise a novel method for treating bubbles in incompressible flow that relies on the conservative advection of bubble mass and an associated equation of state in order to determine pressure boundary conditions inside each bubble. We show that executing this algorithm in a traditional manner leads to stability issues similar to those seen for partitioned methods for solid–fluid coupling. Therefore, we reformulate the problem monolithically. This is accomplished by first proposing a new fully monolithic approach to coupling incompressible flow to fully nonlinear compressible flow including the effects of shocks and rarefactions, and then subsequently making a number of simplifying assumptions on the air flow removing not only the nonlinearities but also the spatial variations of both the density and the pressure. The resulting algorithm is quite robust, has been shown to converge to known solutions for test problems, and has been shown to be quite effective on more realistic problems including those with multiple bubbles, merging and pinching, etc. Notably, this approach departs from a standard two-phase incompressible flow model where the air flow preserves its volume despite potentially large forces and pressure differentials in the surrounding incompressible fluid that should change its volume. Our bubbles readily change volume according to an isothermal equation of state.

97 MATHEMATICS AND COMPUTING↗

Electron cyclotron current drive modelling with parallel momentum correction for tokamaks and stellarators

The electron cyclotron current drive (ECCD) is described by the solution of a drift-kinetic equation (DKE) with the quasi-linear heating term which is highly localised in phase space. Within the adjoint approach, an equivalent DKE must be solved without this highly localised source, and the ECCD is described by a straightforward convolution in phase space. The parallel momentum correction technique [Maassberg et al., Phys. Plasmas 16, 072504 (2009)] reduces the problem to the solution of a simplified mono-energetic DKE. The mono-energetic distribution functions are calculated by the DKES code [W. I. van Rij and S. P. Hirshman, Phys. Fluids B 1, 563 (1989)]. Parallel momentum correction, requiring only an energy-dependent weighting factor, is applied to these distribution functions allowing for the direct estimation of the EC-driven current. For small yet finite collisionalities, a rather simple model for ECCD is presented. In this approach, the symmetric portion of the electron distribution function with respect to v{sub Parallel-To} (the Ware pinch contribution) is neglected and an 'off-set' only in the passing particle domain adds to the collisionless (anti-symmetric) distribution function. For this approximation, only the mono-energetic parallel conductivity coefficient as function of the collisionality is needed. The impact of small yet finite collisionalities on ECCD is shown for X2- and O2-scenarios at W7-X.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reversible Disorder-to-Order Transition Induced by Aqueous Lithiation in Vanadate Electrode Materials

Vanadium-based oxides are intriguing electrode materials in aqueous electrochemical systems owing to their low cost and high theoretical capacity for alkali storage, especially lithium (Li) ions. However, a sequence of phase transformations and irreversible structure distortion upon Li-ion intercalation causes structural instability and has been a lingering problem for vanadium oxide electrodes. Here, in this work, we investigate lithium vanadate (Li–V 3 O 8 ) for aqueous Li-ion intercalation and deintercalation processes. Unlike its crystalline V 2 O 5 polymorph, Li–V 3 O 8 retains monophasic lithiation, which is attributed to its disordered crystalline nature and large interplanar distance. Importantly, we show a unique and reversible sequence of disorder-to-order structural transition induced by the extent of lithiation, which indicates sequential interlayer and intralayer lithiation process, and vice versa in delithiation process, supported by electrokinetic analysis, in situ X-ray diffraction (XRD), and Debye scattering simulations. The absence of distortive phase transitions and multilithiation pathways facilitates Li-ion diffusion across the vanadate electrode materials to improve storage capacity. This work opens a new dimension for vanadium-based disordered oxides, accelerating the development of low-cost, aqueous electrochemical systems.

36 MATERIALS SCIENCE↗

Theoretical Studies of Polar Systems near Ferroelectrics Quantum Critical Points (Final Report)

The PI has studied emergent quantum phases near polar quantum critical points. A first challenge was to develop a theoretical description of the observation that many polar materials undergo classical first-order transitions while displaying quantum criticality. The possibility of novel metallic states near polar quantum critical points was then studied; identification and characterization of a non-Fermi liquid phase was made in a multiband system. In dilute quantum critical polar metals, electronic coupling to polar energy fluctuations was shown to result in attractive electron-electron interactions and to superconductivity. A spin-phonon resonance measurement in applied magnetic field was proposed to determine the magnitude of spin-orbit mediated electron-phonon coupling; furthermore in the polar phase new field-induced phonon collective modes were identified with specific signatures for experiment. In order to keep current, the PI has also worked on other types of strongly correlated problems. With experimental groups, she has developed phenomenologies to identify and explain observed dynamical critical behaviors. The PI has studied the interplay of topology, fractionalization and deconfinement in a minimalist spin model. An emergent phase transition in a 1 + 1 frustrated spin nanotube has also been identified and characterized. The PI has also begun exploring criticality out of equilibrium, characterizing rich dynamical phases associated with photoinduced polar transitions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Novel approach to modeling hybrid stars

We extend the hadronic SU(3) nonlinear sigma model to include quark degrees of freedom. The choice of potential for the deconfinement order parameter as a function of temperature and chemical potential allows us to construct a realistic phase diagram from the analysis of the order parameters of the system. These parameters are the chiral condensate for the chiral symmetry restoration, and the scalar field PHI (as an effective field related to the Polyakov loop) for the deconfinement to quark matter. Besides reproducing lattice QCD results, for zero and low chemical potential, we are in agreement with neutron-star observations for zero temperature.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nonlinear dynamics in a trapped atomic Bose-Einstein condensate induced by an oscillating Gaussian potential

We consider a trapped atomic Bose-Einstein condensate penetrated by a repulsive Gaussian potential and theoretically investigate the dynamics induced by oscillating the Gaussian potential. Our study is based on the numerical calculation of the two-dimensional Gross-Pitaevskii equation. Our calculation reveals the dependence of the characteristic behavior of the condensate on the amplitude and frequency of the oscillating potential. These dynamics are deeply related to the nucleation and dynamics of quantized vortices and solitons. When the potential oscillates with a large amplitude, it nucleates many vortex pairs that move away from the potential. When the amplitude of the oscillation is small, it nucleates solitons through an annihilation of vortex pairs. We discuss three issues concerning the nucleation of vortices. The first is the phase diagram for the nucleation of vortices and solitons near the oscillating potential. The second is the mechanism and critical velocity of the nucleation. The critical velocity of the nucleation is an important issue in quantum fluids, and we propose an expression for the velocity containing both the coherence length and the size of the potential. The third is the divergence of the nucleation time, which is the time it takes for the potential to nucleate vortices, near the critical parameters for vortex nucleation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spin-1 microcondensate in a magnetic field

We study a spin-1 Bose-Einstein condensate small enough to be treated as a single magnetic domain: a system that we term a microcondensate. Because all particles occupy a single spatial mode, this quantum many-body system has a well-defined classical limit consisting of three degrees of freedom, corresponding to the three macroscopically occupied spin states. We study both the classical limit and its quantization, finding an integrable system in both cases. Depending on the sign of the ratio of the spin interaction energy and the quadratic Zeeman energy, the classical limit displays either a separatrix in phase space or Hamiltonian monodromy corresponding to nontrivial phase space topology. We discuss the quantum signatures of these classical phenomena using semiclassical quantization as well as an exact solution using the Bethe ansatz.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantum phase estimation with lossy interferometers

We give a detailed discussion of optimal quantum states for optical two-mode interferometry in the presence of photon losses. We derive analytical formulae for the precision of phase estimation obtainable using quantum states of light with a definite photon number and prove that maximization of the precision is a convex optimization problem. The corresponding optimal precision, i.e., the lowest possible uncertainty, is shown to beat the standard quantum limit thus outperforming classical interferometry. Furthermore, we discuss more general inputs: states with indefinite photon number and states with photons distributed between distinguishable time bins. We prove that neither of these is helpful in improving phase estimation precision.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Toward nonthermal control of excited quantum materials: framework and investigations by ultrafast electron scattering and imaging

Quantum material systems upon applying ultrashort laser pulses provide a rich platform to access excited material phases and their transformations that are not entirely like their equilibrium counterparts. The addressability and potential controls of metastable or long-trapped out-of-equilibrium phases have motivated interests both for the purposes of understanding the nonequilibrium physics and advancing the quantum technologies. Thus far, the dynamical spectroscopic probes eminently focus on microscopic electronic and phonon responses. For characterizing the long-range dynamics, such as order parameter fields and fluctuation effects, the ultrafast scattering probes offer direct sensitivity. Bridging the connections between the microscopic dynamics and macroscopic responses is central toward establishing the nonequilibrium physics behind the light-induced phases. Here, we present a path toward such understanding by cross-examining the structure factors associated with different dynamical states obtained from ultrafast electron scattering, imaging, and modeling. We give the basic theoretical framework on describing the non-equilibrium scattering problems and briefly describe how such framework relates to the out-of-equilibrium phenomena. We give effective models outlining the emergences of nonthermal critical points, hidden phases, and non-equilibrium relaxational responses from vacuum-suspended rare-earth tritellurides, tantalum disulfides thin films, and vanadium dioxide nanocrystalline materials upon light excitations.

79 ASTRONOMY AND ASTROPHYSICS↗