Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Stress-induced martensitic transformation during tensile test of full-size TF conductor jacket tube at 4.2 K

The toroidal-field (TF) conductor jacket of International Thermonuclear Experimental Reactor (ITER) is made of modified 316LN stainless steel, which is influenced by heat treatment at approximately 650 °C for 200 h to produce Nb{sub 3}Sn superconducting materials at the final stage. Due to the high electromagnetic forces arising during magnet operation, higher mechanical properties of the jacket materials at cryogenic temperatures are required. In our work, mechanical properties of the full-size TF conductor jacket tube were investigated, which satisfied the ITER requirements. Stress-induced martensitic transformation mechanism during tensile test of the conductor jacket material at 4.2 K was characterized by means of in-situ temperature dependent XRD, vibrating sample magnetometer (VSM) and in conjunction with transmission electron microscopy (TEM). The tensile behavior related to the amount of stress-induced phase transformation at cryogenic temperature was also discussed.

36 MATERIALS SCIENCE↗

Effect of austempering temperature on cavitation behaviour of unalloyed ADI material

This paper provides an in-depth study and description of cavitation damage and microstructural changes in two types of unalloyed austempered ductile iron (ADI). ADI materials used were austempered at 300 and 400 °C having ausferrite microstructure with 16 and 31.4% of retained austenite, respectively. Metallographic examination was carried out to study the morphology of their cavitation-damaged surfaces. Cavitation damage was initiated at graphite nodules as well as in the interface between a graphite nodule and an ausferrite matrix. Furthermore, microcracking and ferrite/retained austenite morphology were proved to be of great importance for cavitation resistance. Mass loss rate revealed that ADI austempered at 400 °C has a higher cavitation resistance in water than ADI austempered at 300 °C. A higher amount of retained austenite in ADI austempered at 400 °C played an important role in increasing cavitation resistance. The good cavitation behaviour of ADI austempered at 400 °C was due to the matrix hardening by stress assisted phase transformation of retained austenite into martensite (SATRAM) phenomenon, as shown by X-ray diffraction analysis. - Highlights: • Cavitation rate of two ADI materials was tested. • ADI material with a lower hardness has had a lower cavitation rate. • The main reason is microstructural transformations during cavitation. • SATRAM phenomenon increases cavitation resistance.

36 MATERIALS SCIENCE↗

Phase Verification and Thermophysical Properties Evaluation of Pu-Zr alloys

Pu-Zr alloys have been investigated for almost 60 years, with much of the experimental data collected during the 1950's and 1960's'. Key features of the Pu-Zr phase diagram include continuous solubility between the body-centered cubic phases {beta}-Zr and {epsilon}-Pu, extensive solubility of Zr in {delta}-Pu and limited solubility in {alpha}-Pu, {beta}-Pu, {gamma}-Pu, and {delta}'-Pu, and the existence of {theta}-(Pu-Zr) as an intermediate phase that is stable at room-temperature. The available experimental data were synthesized by Okamoto to produce a single phase diagram. However, many details of the phase diagram remain poorly known, particularly those involving temperatures below {approx}400 deg. C or concentrations of Zr below {approx}30 at% or above {approx}65 at%. Thermal property measurements and microstructural characterization on Pu-Zr alloys are complicated by sluggish kinetics, high sensitivity to low concentrations of oxygen and other impurities leading to the possible formation of oxygen-stabilized low-temperature phases, and the metallurgical complexity and unique characteristics of Pu. As a result of these difficulties, the identities of some possible Pu-Zr phases are controversial, and there is little published data on phase transformations or thermophysical properties.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Processing and structural properties of random oriented lead lanthanum zirconate titanate thin films

Highlights: • Pyrochlore phase crystallizes near the bottom film-electrode interface. • PLZT films show a non-uniform microstrain and crystallite size in depth profile. • Complex grainy structure leads to different elastic modulus at the nanoscale. - Abstract: Polycrystalline lead lanthanum zirconate titanate (PLZT) thin films have been prepared by a polymeric chemical route to understand the mechanisms of phase transformations and map the microstructure and elastic properties at the nanoscale in these films. X-ray diffraction, atomic force microscopy (AFM) and ultrasonic force microscopy (UFM) have been used as investigative tools. On one side, PLZT films with mixed-phase show that the pyrochlore phase crystallizes predominantly in the bottom film-electrode interface while a pure perovskite phase crystallizes in top film surface. On the contrary, pyrochlore-free PLZT films show a non-uniform microstrain and crystallite size along the film thickness with a heterogeneous complex grainy structure leading to different elastic properties at nanoscale.

36 MATERIALS SCIENCE↗

Quantum geometric phase under pre- and post-selection

We consider a quantum system subjected to a controlled phase transformation and interaction with the environment in between the acts of selection, which leads to the emergence of interference effects. It is shown that the shift of the dependence of the statistics of contacts’ information with the environement on the controlled phase shift can be interpreted as a geometric phase. This interpretation is consistent with the known operational approach to the geometric phase. As a result, we suggest generalising the operational approach to the realm of pre- and post-selected quantum states. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

In Situ Spectroscopic Observation of Activation and Transformation of Tantalum Suboxides

Using ambient pressure X-ray Photoelectron Spectroscopy (AP-XPS), we were able to observe the process of oxidation of tantalum with different morphological parameters. Being able to trace surface evolution during oxidation, we evaluated activation energy of oxidation under the influence of strain and grain boundaries. It was found that the metal oxidized through three different stages and there was a transition stage where the phase transformation from suboxides to the equilibrium state of pentoxide. The applied stress and surface defects reduced the activation energy oxidation.

36 MATERIALS SCIENCE↗

Rapid Strengthening Without Loss of Ductility via Electropulsing Treatment in Ti-6Al-4V Alloy

The commercial (hot-rolled and annealed) Ti-6Al-4V alloy subjected to electropulsing was investigated in this study. The results show that the electropulsing-treated sample with optimized parameter exhibits greatly refined microstructure and notable strength improvement without loss of ductility. The main strengthening mechanism is recognized as phase transformation and rapid grain refinement induced by recrystallization under EPT.

36 MATERIALS SCIENCE↗

Finite sample size effects in transformation kinetics

The effect of finite sample size on the kinetic law of phase transformations is considered. The case where the second phase develops by a nucleation and growth mechanism is treated under the assumption of isothermal conditions and constant and uniform nucleation rate. It is demonstrated that for spherical particle growth, a thin sample transformation formula given previously is an approximate version of a more general transformation law. The thin sample approximation is shown to be reliable when a certain dimensionless thickness is small. The latter quantity, rather than the actual sample thickness, determines when the usual law of transformation kinetics valid for bulk (large dimension) samples must be modified.

Weinberg, M. C.↗

Effect of austenite grain size on acicular ferrite transformation in a HSLA steel

Highlights: • The fraction of acicular ferrite increases with reduced austenite grain sizes. • The reduction of austenite grain size refines and homogenises the microstructure. • There is a limit to increase the acicular ferrite fraction by reducing austenite size. • An equation relating effective grain sizes with processing parameters was proposed. - Abstract: Austenite grain size is well known to have a significant influence on various phase transformations in steels. Although the effects of many thermomechanical processing parameters on acicular ferrite (AF) transformation in HSLA steels have been investigated, little attention has been paid to the influence of austenite grain size. Therefore, in this research, different parameters of solid-solution heat treatment and rough deformation were adopted to generate austenite with different grain sizes and the effects of austenite grain size before deformation on the AF transformation and grain refinement were investigated. It was found that the reduction of prior-austenite grain size (PAGS) from 62.8 μm to 37.0 μm before austenite deformation promotes the AF transformation and simultaneously refines and homogenises the transformed microstructures. A reciprocally increased density of deformation induced dislocations with the reduction of PAGS was proposed to account for these results, which not only increase the nucleation sites of AF but also suppress the lengthening of BF laths. Further reducing PAGS from 37.0 μm to 22.3 μm, the fraction of AF is not increased and the transformed microstructure is not refined. Possible differences in the type, distribution, and density of austenite deformation substructures between austenite with PAGSs of 37.0 μm and 22.3 μm were argued to be responsible for the cease of grain refinement. The relationship between effective grain sizes and the S{sub v} parameter was investigated and an equation relating effective grain sizes with processing parameters was also proposed.

36 MATERIALS SCIENCE↗

Influence of Melt-Pouring Temperature and Composition of Primary Coating of Shell Mold on Tensile Strength and Creep Resistance of Ni-Based Superalloy

Eight investment castings of Inconel 713C superalloy were fabricated, varying in the melt-pouring temperature, from 1400 to 1520 °C, and CoAl{sub 2}O{sub 4} inoculant content, 0 or 5 wt.%, in the primary coat. Their influence on grain size on tensile and creep properties was investigated. The best combination of yield stress (815 MPa) and elongation (A{sub 4} = 7.65%) at ambient temperature was obtained in surface-modified castings poured from 1520 °C. The longest time to rupture was for the unmodified castings (76.8 h) poured from 1520 °C, while for the modified variant, the time to rupture was lower around, 7.4 h, which was still a satisfactory value. During tensile testing, microcracks were formed in large eutectic γ′, carbides and borides, due to the accumulation of stress at interfaces with the matrix. During creep, N-type rafting of γ′ precipitates and phase transformation MC + γ → γ′ + M{sub 23}C{sub 6} took place.

36 MATERIALS SCIENCE↗

Electron backscatter diffraction study of deformation and recrystallization textures of individual phases in a cross-rolled duplex steel

The evolution of microstructure and texture during cross-rolling and annealing was investigated by electron backscatter diffraction in a ferritic–austenitic duplex stainless steel. For this purpose an alloy with nearly equal volume fraction of the two phases was deformed by multi-pass cross-rolling process up to 90% reduction in thickness. The rolling and transverse directions were mutually interchanged in each pass by rotating the sample by 90° around the normal direction. In order to avoid deformation induced phase transformation and dynamic strain aging, the rolling was carried out at an optimized temperature of 898 K (625 °C) at the warm-deformation range. The microstructure after cross warm-rolling revealed a lamellar structure with alternate arrangement of the bands of two phases. Strong brass and rotated brass components were observed in austenite in the steel after processing by cross warm-rolling. The ferrite in the cross warm-rolling processed steel showed remarkably strong RD-fiber (RD//< 011 >) component (001)< 011 >. The development of texture in the two phases after processing by cross warm-rolling could be explained by the stability of the texture components. During isothermal annealing of the 90% cross warm-rolling processed material the lamellar morphology was retained before collapse of the lamellar structure to the mutual interpenetration of the phase bands. Ferrite showed recovery resulting in annealing texture similar to the deformation texture. In contrast, the austenite showed primary recrystallization without preferential orientation selection leading to the retention of deformation texture. The evolution of deformation and annealing texture in the two phases of the steel was independent of one another. - Highlights: • Effect of cross warm-rolling on texture formation is studied in duplex steel. • Brass texture in austenite and (001)<110 > in ferrite are developed. • Ferrite shows recovery during annealing retaining the (001)<110 > component. • Austenite shows recrystallization during annealing retaining the deformation texture. • The deformation of recrystallization of two phases is independent of one other.

36 MATERIALS SCIENCE↗

Fractal nature of medium-range order in metallic glasses

The atomic structure of metallic glasses has been a long-standing scientific mystery. Unlike crystalline metals, where long-range ordering is established by periodic stacking of fundamental building blocks known as unit cells, a metallic glass has no long-range translational order, although some degrees of short- and medium-range order do exist.1,2,3 Previous studies1,2,3,4 have identified solute-centered clusters, characterized by short-range order (SRO) in favor of unlike bonds, as the fundamental building blocks of metallic glasses. However, how these building blocks are connected or packed to form the medium range order (MRO) remains an open question.1,2,3 Here, based on neutron and x-ray diffraction experiments, we propose a new packing scheme - the self-similar packing of atomic clusters. We show that MRO has the characteristics of a fractal network with a dimension of 2.38, and is described by a power-law correlation function over the medium-range length scale. Our finding provides a new prospective of order in disordered materials and has broad implications for understanding the structure-property relationship in metallic glasses, particularly those involving change in length scales due to phase transformation and mechanical deformation.

36 MATERIALS SCIENCE↗

Soliton microdynamics of structural phase transitions in crystalline materials and phonons of a new type on phase interfaces

It is shown that the generation of nonlinear soliton, breather, and shock waves at high dynamic excitations leads to martensitic phase transformations in crystalline materials of the {alpha}-uranium type. Investigations have been performed by modeling the atomic microdynamics with the use of the modified interaction potential. It is shown that collisions of compression shock waves and rarefaction solitons lead to the generation of nuclei of new phases, which evolve according to the domino principle. The phonon spectra of systems with phase interfaces are investigated. A new effect of the total internal phonon reflection has been discovered. It is shown that surface phonons of radically a new type (different from the Rayleigh surface waves) are excited on interfaces. The results are adapted to materials of the {alpha}-uranium type, where solitons have been found at slow-neutron scattering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Numerical study of mechanical behavior of ceramic composites under compression loading in the framework of movable cellular automaton method

Movable cellular automaton method was used for investigating the mechanical behavior of ceramic composites under uniaxial compression. A 2D numerical model of ceramic composites based on oxides of zirconium and aluminum with different structural parameters was developed using the SEM images of micro-sections of a real composite. The influence of such structural parameters as the geometrical dimensions of layers, inclusions, and their spatial distribution in the sample, the volume content of the composite components and their mechanical properties (as well as the amount of zirconium dioxide that underwent the phase transformation) on the fracture, strength, deformation and dissipative properties was investigated.

36 MATERIALS SCIENCE↗

Rapid assessment of interfacial stabilization mechanisms of metastable precipitates to accelerate high-temperature Al-alloy development

Precipitate strengthened high-temperature alloys are currently used in safety-critical applications. Understanding precipitate stability and solute segregation mechanisms at high temperatures is key to designing high-strength alloys. Rapid in-situ approaches, therefore, are pivotal in accelerating the alloy design process. Hereby using the test case of a promising high-temperature Al-Cu-Mn-Zr alloy, we demonstrate the value of in-situ atom probe tomography coupled with in-situ transmission electron microscopy to reveal atomic-scale mechanisms that lead to the emergence of non-equilibrium solute segregation. Mn and Zr segregation at strengthening precipitate(θ’)-matrix interface increases the kinetic barrier for phase transformation thus retaining high-temperature strength.

36 MATERIALS SCIENCE↗

Thermal Properties of Structural Materials Found in Light Water Reactor Vessels

High temperature material property data for structural materials used in existing Light Water Reactors (LWRs) are limited. Often, extrapolated values recommended in the literature differ significantly. To reduce such uncertainties, new data for SA533 Grade B, Class 1 (SA533B1) low alloy steel, Stainless Steel 304 (SS304), and Inconel 600, found in Light Water Reactor (LWR) vessels and penetrations, were acquired and tested using material property systems available at the High Temperature Test Laboratory (HTTL) at the Idaho National Laboratory (INL). Properties measured include thermal expansion, specific heat capacity, and thermal diffusivity for temperatures up to 1200 oC. From these results, thermal conductivity and density were calculated. Results show that, in some cases, previously recommended values for these material differ significantly from measured values at high temperatures. This is especially true for SA533B1, as previous data do not account for the phase transformation of this material between 740 oC and 840 oC.

36 MATERIALS SCIENCE↗

TIME-TEMPERATURE-TRANSFORMATION (TTT) DIAGRAMS FOR FUTURE WASTE COMPOSITIONS

As a part of the Waste Acceptance Product Specifications (WAPS) for Vitrified High-Level Waste Forms defined by the Department of Energy - Office of Environmental Management, the waste form stability must be determined for each of the projected high-level waste (HLW) types at the Savannah River Site (SRS). Specifically, WAPS 1.4.1 requires the glass transition temperature (T{sub g}) to be defined and time-temperature-transformation (TTT) diagrams to be developed. The T{sub g} of a glass is an indicator of the approximate temperature where the supercooled liquid converts to a solid on cooling or conversely, where the solid begins to behave as a viscoelastic solid on heating. A TTT diagram identifies the crystalline phases that can form as a function of time and temperature for a given waste type or more specifically, the borosilicate glass waste form. In order to assess durability, the Product Consistency Test (PCT) was used and the durability results compared to the Environmental Assessment (EA) glass. The measurement of glass transition temperature and the development of TTT diagrams have already been performed for the seven Defense Waste Processing Facility (DWPF) projected compositions as defined in the Waste Form Compliance Plan (WCP) and in SRNL-STI-2009-00025. Additional phase transformation information exists for other projected compositions, but overall these compositions did not cover composition regions estimated for future waste processing. To develop TTT diagrams for future waste types, the Savannah River National Laboratory (SRNL) fabricated two caches of glass from reagent grade oxides to simulate glass compositions which would be likely processed with and without Al dissolution. These were used for glass transition temperature measurement and TTT diagram development. The glass transition temperatures of both glasses were measured using differential scanning calorimetry (DSC) and were recorded to be 448 C and 452 C. Using the previous TTT diagrams as guidance, subsamples of each glass were isothermally heat treated for 1 to 768 hours at temperatures between 500 C to 1000 C. Each of the heat treated samples, along with quenched and centerline canister cooled (CCC) treated samples, were analyzed using X-ray diffraction (XRD) and the PCT. Maximum crystallization was detected in samples treated at 700 C and 600 C for more than 96 hours in both glasses. Phases crystallized were similar in composition if not the same as those found in the previous TTT studies. Six different crystalline phases were detected, including nepheline, aegirine, lithium silicate, trevorite (spinel based), krinovite, and calcium magnesium iron silicon oxide. Overall, phases were spinel (iron) based, lithium metasilicate, sodium aluminosilicate or alkali transition metal silicate in composition. No new crystalline families were detected. Durability, as measured by the PCT, decreased when lithium silicate or nepheline crystals were present. The conclusions of this study were consistent with previous studies. In order to continue to meet the requirements of the WCP, a simplified strategy is suggested for the generation of future TTT diagrams. Only extremely significant changes in composition resulting from processing strategy changes would require generating more TTT diagrams.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Lattice crossover and phase transitions in NdAlO{sub 3}-GdAlO{sub 3} system

Phase and structural behaviour in the (1-x)NdAlO{sub 3}-xGdAlO{sub 3} system in a whole concentration range has been studied by means of in situ high-resolution X-ray synchrotron powder diffraction technique and differential thermal analysis. Two kinds of solid solutions Nd{sub 1-x}Gd{sub x}AlO{sub 3} have been found at room temperature: one with rhombohedral (x<0.15) and one with orthorhombic (x{>=}0.20) symmetry. A morphotropic phase transition occurs at x Almost-Equal-To 0.15, where the co-existence of both phases was observed. Peculiarity of the orthorhombic solid solution is the lattice parameter crossover at the compositions with x=0.33, 0.49 and 0.62. First-order structural transition Pbnm{r_reversible}R3{sup Macron }c has been detected both from in situ powder diffraction and thermal analysis data. Continuous phase transformation R3{sup Macron }c{r_reversible}Pm3{sup Macron }m above 2140 K has been predicted for Nd-rich sample Nd{sub 0.85}Gd{sub 0.15}AlO{sub 3} from the extrapolation of high-temperature behaviour of the lattice parameter ratio of the rhombohedral phase. Based on the experimental data, the phase diagram of the pseudo-binary system NdAlO{sub 3}-GdAlO{sub 3} has been constructed. - Graphical abstract: Concentration dependencies of normalized lattice parameters of Nd{sub 1-x}Gd{sub x}AlO{sub 3} perovskite solid solutions. Highlights: Black-Right-Pointing-Pointer Two kinds of solid solutions Nd{sub 1-x}Gd{sub x}AlO{sub 3} were found in the NdAlO{sub 3}-GdAlO{sub 3} system. Black-Right-Pointing-Pointer Morphotropic transition between both perovskite phases occurs at x Almost-Equal-To 0.15. Black-Right-Pointing-Pointer Lattice parameter crossover was found in orthorhombic solid solution. Black-Right-Pointing-Pointer Temperature driven first-order phase transition Pbnm{r_reversible}R3{sup Macron }c was found in Nd{sub 1-x}Gd{sub x}AlO{sub 3}. Black-Right-Pointing-Pointer Phase diagram of the pseudo-binary system NdAlO{sub 3}-GdAlO{sub 3} has been constructed.

36 MATERIALS SCIENCE↗