Search NASA⌕ Search

SEARCH · Search NASA

Results for “progress properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Therapeutic targeting of replicative immortality

One of the hallmarks of malignant cell populations is the ability to undergo continuous proliferation. This property allows clonal lineages to acquire sequential aberrations that can fuel increasingly autonomous growth, invasiveness, and therapeutic resistance. Innate cellular mechanisms have evolved to regulate replicative potential as a hedge against malignant progression. When activated in the absence of normal terminal differentiation cues, these mechanisms can result in a state of persistent cytostasis. This state, termed “senescence,” can be triggered by intrinsic cellular processes such as telomere dysfunction and oncogene expression, and by exogenous factors such as DNA damaging agents or oxidative environments. Despite differences in upstream signaling, senescence often involves convergent interdependent activation of tumor suppressors p53 and p16/pRB, but can be induced, albeit with reduced sensitivity, when these suppressors are compromised. Doses of conventional genotoxic drugs required to achieve cancer cell senescence are often much lower than doses required to achieve outright cell death. Additional therapies, such as those targeting cyclin dependent kinases or components of the PI3K signaling pathway, may induce senescence specifically in cancer cells by circumventing defects in tumor suppressor pathways or exploiting cancer cells’ heightened requirements for telomerase. Such treatments sufficient to induce cancer cell senescence could provide increased patient survival with fewer and less severe side effects than conventional cytotoxic regimens. This positive aspect is countered by important caveats regarding senescence reversibility, genomic instability, and paracrine effects that may increase heterogeneity and adaptive resistance of surviving cancer cells. Nevertheless, agents that effectively disrupt replicative immortality will likely be valuable components of new combinatorial approaches to cancer therapy.

60 APPLIED LIFE SCIENCES↗

Interfacial engineering of gallium indium phosphide photoelectrodes for hydrogen evolution with precious metal and non-precious metal based catalysts

Gallium indium phosphide (GaInP 2 ) is a semiconductor with promising optical and electronic properties to serve as the large bandgap, top junction in a dual absorber tandem solar water splitting device. Poor intrinsic catalytic ability and surface corrosion in aqueous electrolyte remain key obstacles. Significant progress has been made developing thin-film protection layers and active catalysts for photoelectrochemical devices, but combining these into a catalytic protection layer that can provide long-term stability without sacrificing performance has proven difficult due, in large part, to challenges in developing active and stable interfaces. In this work, we demonstrate that a nanoscale molybdenum disulfide (MoS 2 ) film functions both as an effective protection layer and excellent hydrogen evolution catalyst for GaInP 2 photocathodes, with only a ~10% loss in initial light-limited current density after 100 h, and a photocurrent onset potential better than that of the same state-of-the-art device with a platinum-ruthenium catalyst. Using transient photoreflectance spectroscopy, we probed the carrier dynamics of these photocathodes and show that the MoS 2 coated device exhibits improved electron transfer at the surface interface compared to the PtRu catalyzed device. These MoS 2 protected devices are among the most active and stable single-absorber photocathodes for solar water splitting to date and offer a promising pathway towards generating hydrogen with high efficiency and significant longevity.

08 HYDROGEN↗

On the structure and statistical theory of turbulence of extended magnetohydrodynamics

Recent progress regarding the noncanonical Hamiltonian formulation of extended magnetohydrodynamics (XMHD), a model with Hall drift and electron inertia, is summarized. The advantages of the Hamiltonian approach are invoked to study some general properties of XMHD turbulence, and to compare them against their ideal MHD counterparts. For instance, the helicity flux transfer rates for XMHD are computed, and Liouville's theorem for this model is also verified. The latter is used, in conjunction with the absolute equilibrium states, to arrive at the spectra for the invariants, and to determine the direction of the cascades, e.g., generalizations of the well-known ideal MHD inverse cascade of magnetic helicity. After a similar analysis is conducted for XMHD by inspecting second order structure functions and absolute equilibrium states, a couple of interesting results emerge. When cross helicity is taken to be ignorable, the inverse cascade of injected magnetic helicity also occurs in the Hall MHD range-this is shown to be consistent with previous results in the literature. In contrast, in the inertial MHD range, viz at scales smaller than the electron skin depth, all spectral quantities are expected to undergo direct cascading. Finally, the consequences and relevance of our results in space and astrophysical plasmas are also briefly discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Updated galactic radio constraints on Dark Matter

We perform a detailed analysis of the synchrotron signals produced by dark matter annihilations and decays. We consider different set-ups for the propagation of electrons and positrons, the galactic magnetic field and dark matter properties. We then confront these signals with radio and microwave maps, including PLANCK measurements, from a frequency of 22 MHz up to 70 GHz. We derive two sets of constraints: conservative and progressive, the latter based on a modeling of the astrophysical emission. Radio and microwave constraints are complementary to those obtained with other indirect detection methods, especially for dark matter annihilating into leptonic channels.

79 ASTRONOMY AND ASTROPHYSICS↗

Predicting resistive wall mode stability in NSTX through balanced random forests and counterfactual explanations

Abstract Recent progress in the disruption event characterization and forecasting framework has shown that machine learning guided by physics theory can be easily implemented as a supporting tool for fast computations of ideal stability properties of spherical tokamak plasmas. In order to extend that idea, a customized random forest (RF) classifier that takes into account imbalances in the training data is hereby employed to predict resistive wall mode (RWM) stability for a set of high beta discharges from the NSTX spherical tokamak. More specifically, with this approach each tree in the forest is trained on samples that are balanced via a user-defined over/under-sampler. The proposed approach outperforms classical cost-sensitive methods for the problem at hand, in particular when used in conjunction with a random under-sampler, while also resulting in a threefold reduction in the training time. In order to further understand the model’s decisions, a diverse set of counterfactual explanations based on determinantal point processes (DPP) is generated and evaluated. Via the use of DPP, the underlying RF model infers that the presence of hypothetical magnetohydrodynamic activity would have prevented the RWM from concurrently going unstable, which is a counterfactual that is indeed expected by prior physics knowledge. Given that this result emerges from the data-driven RF classifier and the use of counterfactuals without hand-crafted embedding of prior physics intuition, it motivates the usage of counterfactuals to simulate real-time control by generating the β N levels that would have kept the RWM stable for a set of unstable discharges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Precipitation in pores: A geochemical frontier

This article's purpose is to review some of the recent research in which geochemists have examined precipitation of solid phases in porous media, particularly in pores a few nanometers in diameter (nanopores). While this is a “review,” it is actually more forward-looking in that the list of things about this phenomenon that we do not know or cannot control at this time is likely longer than what we do know and can control. For example, there are three directly contradictory theories on how to predict how precipitation proceeds in a medium of varying pore size, as will be discussed below. The confusion on this subject likely stems from the complexity of the phenomenon itself: One can easily clog a porous medium by inducing a rapid, homogeneous precipitation directly from solution, or have limited precipitation occur that does not affect permeability or even porosity substantially. It is more difficult to engineer mineral precipitation in order to obtain a specific outcome, such as filling all available pore space over a targeted area for the purposes of contaminant sequestration. However, breakthrough discoveries could occur in the next five to ten years that enhance our ability to predict robustly and finely control precipitation in porous media by understanding how porosity and permeability evolve in response to system perturbations. These discoveries will likely stem (at least in part) from advances in our ability to 1) perform and interpret X-ray/neutron scattering experiments that reveal the extent of precipitation and its locales within porous media (Anovitz and Cole 2015, this volume), and 2) utilize increasingly powerful simulations to test concepts and models about the evolution of porosity and permeability as precipitation occurs (Steefel et al. 2015, this volume). A further important technique to isolate specific phenomena and understand reactivity is also microfluidics cell experiments that allow specific control of flow paths and fluid velocities (Yoon et al. 2012). An improved ability to synthesize idealized porous media will allow for tailored control of pore distributions, mineralogy and will allow more reproducible results. This in turn may allow us to isolate specific processes without the competing and obfuscatory effects that hinder generalization of observations when working with solely natural samples. It is likely that no one single experiment, or simulation technique will provide the key discoveries: to make substantive progress will require a collaborative effort to understand the interplay between fluid transport and geochemistry. Finally, where rock fracturing and elevated pressures are of concern, an understanding and capability to model geomechanical properties are necessary (Scherer 1999).

58 GEOSCIENCES↗

X-ray emission from RS CVn systems - A progress report

A report is given on progress made in a search for soft X-ray emission from RS CVn systems, using the low-energy detectors aboard HEAO 1. To date, nine systems have been seen. The properties of these systems are discussed. The failure to detect certain systems is considered. The possibility is discussed of discovering hitherto unknown RS CVn systems with soft X-ray observations.

Walter, F.↗

Silicon production process evaluations

The chemical engineering analysis of the preliminary process design of a process for producing solar cell grade silicon from dichlorosilane is presented. A plant to produce 1,000 MT/yr of silicon is analyzed. Progress and status for the plant design are reported for the primary activities of base case conditions (60 percent), reaction chemistry (50 percent), process flow diagram (35 percent), energy balance (10 percent), property data (10 percent) and equipment design (5 percent).

Source record↗

Remote sensing research for agricultural applications

Materials and methods used to characterize selected soil properties and agricultural crops in San Joaquin County, California are described. Results show that: (1) the location and widths of TM bands are suitable for detecting differences in selected soil properties; (2) the number of TM spectral bands allows the quantification of soil spectral curve form and magnitude; and (3) the spatial and geometric quality of TM data allows for the discrimination and quantification of within field variability of soil properties. The design of the LANDSAT based multiple crop acreage estimation experiment for the Idaho Department of Water Resources is described including the use of U.C. Berkeley's Survey Modeling Planning Model. Progress made on Peditor software development on MIDAS, and cooperative computing using local and remote systems is reported as well as development of MIDAS microcomputer systems.

Colwell, R. N.↗

Thermal barrier coating life prediction model development, phase 1

The objective of this program was to establish a methodology to predict thermal barrier coating (TBC) life on gas turbine engine components. The approach involved experimental life measurement coupled with analytical modeling of relevant degradation modes. Evaluation of experimental and flight service components indicate the predominant failure mode to be thermomechanical spallation of the ceramic coating layer resulting from propagation of a dominant near interface crack. Examination of fractionally exposed specimens indicated that dominant crack formation results from progressive structural damage in the form of subcritical microcrack link-up. Tests conducted to isolate important life drivers have shown MCrAlY oxidation to significantly affect the rate of damage accumulation. Mechanical property testing has shown the plasma deposited ceramic to exhibit a non-linear stress-strain response, creep and fatigue. The fatigue based life prediction model developed accounts for the unusual ceramic behavior and also incorporates an experimentally determined oxide rate model. The model predicts the growth of this oxide scale to influence the intensity of the mechanic driving force, resulting from cyclic strains and stresses caused by thermally induced and externally imposed mechanical loads.

Demasi, Jeanine T.↗

Satellite-derived cloud fields during the FIRE cirrus IFO case study

The First ISCCP Regional Experiment (FIRE) Cirrus Intensive Field Observation (IFO) program measured cirrus cloud properties with a variety of instruments from the surface, aircraft, and satellites. Surface and aircraft observations provide a small scale point and line measurements of different micro- and macro-physical properties of advecting and evolving cloud systems. Satellite radiance data may be used to measure the areal variations of the bulk cloud characteristics over meso- and large scales. Ideally, the detailed cloud properties derived from the small scale measurements should be tied to the bulk cloud properties typically derived from the satellite data. Full linkage of these data sets for a comprehensive description of a given cloud field, one of the goals of FIRE, should lead to significant progress in understanding, measuring, and modeling cirrus cloud systems. The relationships derived from intercomparisons of lidar and satellite data by Minnis et al. are exploited in a mesoscale analysis of the satellite data taken over Wisconsin during the Cirrus IFO case study.

Heck, Patrick W.↗

Observations of comets and asteroids

All available ground based observational techniques were used to study the chemical and physical properties of the small bodies of the solar system, primarily comets and next asteroids. The ultimate goal is to use these bodies to understand the formation and evolution of the solar system. Progress and accomplishments, and publications are given.

Ahearn, Michael F.↗

Ensuring correct rollback recovery in distributed shared memory systems

Distributed shared memory (DSM) implemented on a cluster of workstations is an increasingly attractive platform for executing parallel scientific applications. Checkpointing and rollback techniques can be used in such a system to allow the computation to progress in spite of the temporary failure of one or more processing nodes. This paper presents the design of an independent checkpointing method for DSM that takes advantage of DSM's specific properties to reduce error-free and rollback overhead. The scheme reduces the dependencies that need to be considered for correct rollback to those resulting from transfers of pages. Furthermore, in-transit messages can be recovered without the use of logging. We extend the scheme to a DSM implementation using lazy release consistency, where the frequency of dependencies is further reduced.

Janssens, Bob↗

Observational Review of Gamma-Ray Bursts

The observed gamma-ray temporal, spectral, intensity and spatial distribution characteristics of GRBs, primarily from data obtained from the Compton Observatory, will be described. The talk will concentrate on recent studies of burst properties, correlations of GRB parameters and other statistical studies that have only recently come to light with the unprecedented sample of over two thousand GRBs, along with some mention of studies in progress by members of the BATSE team. Recent studies of possible observational biases, un-triggered GRBs and threshold calculations for BATSE will also be described.

Fishman, Gerald J.↗

Observational Review of Gamma-Ray Bursts

The observed gamma-ray temporal, spectral, intensity and spatial distribution characteristics of GRBs (Gamma Ray Bursts), primarily from data obtained from the Compton Observatory, will be described. The talk will concentrate on recent studies of burst properties, correlations of GRB parameters and other statistical studies that have only recently come to light with the unprecedented sample of over two thousand GRBs, along with some mention of studies in progress by members of the BATSE (Burst and Transient Source Experiment) team. Recent studies of possible observational biases, un-triggered GRBs and threshold calculations for BATSE will also be described.

Fishman, Gerald J.↗

Observational Review of Gamma-Ray Bursts

The observed gamma-ray temporal, spectral, intensity and spatial distribution characteristics of GRBs, primarily from data obtained from the Compton Observatory, will be described. The talk will concentrate on recent studies of burst properties, correlations of GRB parameters and other statistical studies that have only recently come to light with the unprecedented sample of over two thousand GRBs, along with some mention of studies in progress by members of the BATSE team.

Fishman, Gerald J.↗

Joint Discussion/Mini-Workshop: Gamma-Ray Bursts and their Hosts

The observed gamma-ray temporal, spectral, intensity and spatial distribution characteristics of GRBs, primarily from data obtained from the Compton Observatory, will be described. The talk will concentrate on recent studies of burst properties, correlations of GRB parameters and other statistical studies that have only recently come to light with the unprecedented sample of over two thousand GRBs, along with some mention of studies in progress by members of the BATSE team.

Fishman, Gerald J.↗

Ceramic Matrix Composite (CMC) Materials Characterization

Under the former NASA EPM Program, much initial progress was made in identifying constituent materials and processes for SiC/SiC ceramic composite hot-section components. This presentation discusses the performance benefits of these approaches and elaborates on further constituent and property improvements made under NASA UEET. These include specific treatments at NASA that significantly improve the creep and environmental resistance of the Sylramic(TM) SiC fiber as well as the thermal conductivity and creep resistance of the CVI Sic matrix. Also discussed are recent findings concerning the beneficial effects of certain 2D-fabric architectures and carbon between the BN interphase coating and Sic matrix.

Calomino, Anthony↗