Search NASA⌕ Search

SEARCH · Search NASA

Results for “section”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Description of Differential Cross Sections for {sup 63}Cu + p Nuclear Reactions Induced by High-Energy Cosmic-Ray Protons

The results of calculation of {sup 63}Cu + p differential cross sections at incident-proton energies between 10 and 200 MeV and a comparative analysis of these results are presented as a continuation of the earlier work of our group on developing methods for calculating the contribution of nuclear reactions to radiative effects arising in the onboard spacecraft electronics under the action of high-energy cosmic-ray protons on {sup 63}Cu nuclei (generation of single-event upsets) and as a supplement to the earlier calculations performed on the basis of the TАLYS code in order to determine elastic- and inelastic-scattering cross sections and charge, mass, and energy distributions of recoil nuclei (heavy products of the {sup 63}Cu + p nuclear reaction). The influence of various mechanisms of the angular distributions of particles emitted in the {sup 63}Cu + p nuclear reaction is also discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2017

Energy scan of cross sections for e{sup +}e{sup –} annihilation into quarkonia and light hadrons in the Belle experiment

The cross sections of the reactions e{sup +}e{sup –} → ϒ(nS)π{sup +}π{sup −} (n = 1, 2,3) and e{sup +}e{sup –} → h{sub b}(nP)π{sup +}π{sup −} (n = 1, 2) are measured as a function of the cms collision energy from their thresholds up to 11.02 GeV using the data of the Belle experiment operating at the KEKB e{sup +}e{sup –} collider. The peaks of the ϒ(10 860) and ϒ(11020) resonances are observed in the cross sections with an insignificant contribution of the continuum. The decay ϒ(11020) → h{sub b}(nP)π{sup +}π{sup −} is found to fully proceed through intermediate isovector states Z{sub b}(10610) and Z{sub b}(10650).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2017

Time-dependent microscopic description of total reaction cross sections for collisions of {sup 6}He and {sup 9}Li nuclei with {sup 28}Si nuclei at low and intermediate energies

A microscopic description is given for the collisions of the {sup 9}Li and {sup 6}He nuclei with the {sup 28}Si nucleus. It is based on numerical solution of the time-dependent Schrödinger equation for the external neutrons of the projectile nuclei. The corrections to the nucleus-nucleus potential associated with the redistribution of external neutrons were determined for energies of 5 to 60 MeV/nucleon using the time-dependent folding potential. The probability of leaving the elastic channel was calculated using the reflectionless boundary condition for partial waves. The calculated cross sections are in agreement with the experimental data on the total cross sections for the above reactions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2017

Geodesic acoustic modes in noncircular cross section tokamaks

The influence of the shape of the plasma cross section on the continuous spectrum of geodesic acoustic modes (GAMs) in a tokamak is analyzed in the framework of the MHD model. An expression for the frequency of a local GAM for a model noncircular cross section plasma equilibrium is derived. Amendments to the oscillation frequency due to the plasma elongation and triangularity and finite tokamak aspect ratio are calculated. It is shown that the main factor affecting the GAM spectrum is the plasma elongation, resulting in a significant decrease in the mode frequency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Analysis of Data on the Cross Sections for Electron-Impact Ionization and Excitation of Electronic States of Atomic Hydrogen (Review)

A review is given of experimental and theoretical data on the cross sections for ionization, excitation, and deexcitation of atomic hydrogen. The set of the cross sections required to calculate the electron energy distribution function and find the level-to-level rate coefficients needed to solve balance equations for the densities of neutral and charged particles in hydrogen plasma is determined.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Layer-by-Layer Analysis of the Thickness Distribution of Silicon Dioxide in the Structure SiO{sub 2}/Si(111) by Inelastic Electron Scattering Cross-Section Spectroscopy

The SiO{sub 2}-concentration profile in the structure SiO{sub 2}/Si(111) is determined from experimental spectra of the cross section for the inelastic scattering of reflected electrons in the primary electron energy range from 300 to 3000 eV. The spectra are analyzed with the use of a proposed algorithm and developed computer program for simulating the spectra of the cross section for the inelastic scattering of reflected electrons for layered structures with an arbitrary number of layers, arbitrary thickness, and variable concentration of components in each layer. The best agreement between the calculated and experimental spectra is attained by varying the silicon dioxide and silicon concentrations in each layer. The results obtained can be used for profiling film-substrate structures with an arbitrary composition.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Study of the structures of cleaved cross sections by Raman spectroscopy

Scanning confocal Raman spectroscopy is used to study the crystal structure of GaAs irradiated with Mn{sup +} ions with subsequent pulse laser annealing. The scanning of cleaved cross sections of samples shows that the structure completely recovers over the depth of implantation after the annealing. Scattering in the coupled phonon–plasmon mode is revealed, which is indicative of electrical activation of the impurity at Mn doses above 1 × 10{sup 16} cm{sup –2}. The study shows the possibilities of using scanning confocal Raman spectroscopy in investigations of cleaved cross sections of structures. Using a test structure with a single δ-doped C layer, we show that the lateral resolution of the technique is 300 nm.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Neutron Induced Nuclear Reaction Cross Sections for Radiochemistry in the Region of Thallium, Lead, and Bismuth

We have developed a set of modeled nuclear reaction cross sections for use in radiochemical detector diagnostics. Systematics for the input parameters required by the Hauser-Feshbach statistical model developed in the TALYS code system are used to calculate neutron induced nuclear reaction cross sections for targets ranging from Thallium (Z = 81) to Bismuth (Z = 83).

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2020

An Exploratory Approach Using Regression and Machine Learning in the Analysis of Mass Absorption Cross Section of Black Carbon Aerosols: Model Development and Evaluation

Mass absorption cross-section of black carbon (MAC BC ) describes the absorptive cross-section per unit mass of black carbon, and is, thus, an essential parameter to estimate the radiative forcing of black carbon. Many studies have sought to estimate MAC BC from a theoretical perspective, but these studies require the knowledge of a set of aerosol properties, which are difficult and/or labor-intensive to measure. We therefore investigate the ability of seven data analytical approaches (including different multivariate regressions, support vector machine, and neural networks) in predicting MAC BC for both ambient and biomass burning measurements. Our model utilizes multi-wavelength light absorption and scattering as well as the aerosol size distributions as input variables to predict MAC BC across different wavelengths. We assessed the applicability of the proposed approaches in estimating MAC BC using different statistical metrics (such as coefficient of determination (R 2 ), mean square error (MSE), fractional error, and fractional bias). Overall, the approaches used in this study can estimate MAC BC appropriately, but the prediction performance varies across approaches and atmospheric environments. Based on an uncertainty evaluation of our models and the empirical and theoretical approaches to predict MAC BC , we preliminarily put forth support vector machine (SVM) as a recommended data analytical technique for use. We provide an operational tool built with the approaches presented in this paper to facilitate this procedure for future users.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

Re-evaluation of the {sup 16}O(N, γ){sup 17}O cross section at astrophysical energies and its role as a neutron poison in the s-process

The doubly magic nucleus {sup 16}O has a small neutron-capture cross section of just a few tens of microbarns in the astrophysical energy region. Despite this, {sup 16}O plays an important role as a neutron poison in the astrophysical slow neutron capture (s) process due to its high abundance. We present in this paper a re-evaluation of the available experimental data for {sup 16}O(n,γ){sup 17}O and derive a new recommendation for the Maxwellian-averaged cross sections between kT = 5 and 100 keV. Our new recommendations are lower up to kT = 60 keV compared to the previously recommended values but up to 14% higher at kT = 100 keV. We explore the impact of this different energy dependence on the weak s-process during core helium burning (kT = 26 keV) and shell carbon burning (kT = 90 keV) in massive stars where {sup 16}O is the most abundant isotope.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1986

Turbine Engine Hot Section Technology 1986

On October 21 and 22, 1986, the Turbine Engine Hot Section Technology (HOST) Project of the NASA Lewis Research Center sponsored a workshop to discuss current research pertinent to turbine engine durability problems. Presentations were made concerning the hot-section environment and the behavior of combustion liners, turbine blades, and turbine vanes. The presentations were divided Into six sessions: Instrumentation, Combustion, Turbine Heat Transfer, Structural Analysis, Fatigue and Fracture, and Surface Protection. The principal objective of each session was to disseminate research results to date. Topics discussed included modeling of thermal and fluid-flow phenomena, structural analysis, fatigue and fracture, surface protective coatings, constitutive behavior of materials, stress-strain response, and life-prediction methods. Researchers from industry, academia, and government presented results of their work sponsored by the HOST Project. This publication contains extended abstracts and visual material presented during the workshop.

Turbine Engine Hot Section Technology (HOST)↗
NASA NTRS1993

Cross Sections for Electron Scattering by Ground State Ba; Elastic Scattering and Excitation of the ...6s6p (sup 1)P(sub 1) Level

Differential cross sections for elastic and inelastic (6s6p (sup 1)P(sub 1)) electron scattering from ground state Ba atom have been measured at 5eV, 10eV, 15eV, and 20eV impact energies in the angular range from 0(sup 0) to 130(sup 0). Extrapolation to the larger angles have been performed using theoretical calculations as a guide, and integral and momentum transfer cross sections were derived. Theoretical calculations based on two channel clos coupling and relativistic and non-relativistic distorted wave methods have been compared with the present results. Good agreement between experiment and various theoretical results is found at small scattering angles but significant deviations exist at larger scattering angles.

electon scattering extrapolation scattering angles↗
NASA NTRS2017

SpaRibs Geometry Parameterization for Wings with Multiple Sections using Single Design

The SpaRibs topology of an aircraft wing has a significant effect on its structural behavior and stability as well as the flutter performance. The development of additive manufacturing techniques like Electron Beam Free Form Fabrication (EBF3) has made it feasible to manufacture aircraft wings with curvilinear spars, ribs (SpaRibs) and stiffeners. In this article a new global-local optimization framework for wing with multiple sections using curvilinear SpaRibs is described. A single design space is used to parameterize the SpaRibs geometry. This method has been implemented using MSC-PATRAN to create a broad range of SpaRibs topologies using limited number of parameters. It ensures C0 and C1 continuities in SpaRibs geometry at the junction of two wing sections with airfoil thickness gradient discontinuity as well as mesh continuity between all structural components. This method is advantageous in complex multi-disciplinary optimization due to its potential to reduce the number of design variables. For the global-local optimization the local panels are generated by an algorithm which is totally based on a set algebra on the connectivity matrix data. The great advantage of this method is that it is completely independent of the coordinates of the nodes of the finite element model. It is also independent of the order in which the elements are distributed in the FEM. The code is verified by optimizing of the CRM Baseline model at trim condition at Mach number equal to 0.85 for five different angle of attack (-2deg, 0deg,2deg,4deg and 6deg). The final weight of the wing is 19,090.61 lb. This value is comparable to that obtained by Qiang et al. 6 (19,269 lb).

wing sections↗
NASA NTRSDate not supplied

Three-Dimensional Reconstruction of Defects and Structures in Additively Manufactured Parts with Automated Serial Sectioning

Metal additive manufacturing (AM) processes have been demonstrated to be effective at reducing costs and lead times associated with complex components for space flight applications. Laser powderbed fusion (L-PBF) is a commonly used AM technology due to the ability to produce complex parts with fine feature resolution in a wide variety of alloys and applications. L-PBF, like many other manufacturing processes, can produce minor flaws in parts when in nominal operation as well as process-escape defects when process abnormalities occur. The effects of the flaws and methods of detecting the flaws are a subject of interest to understand the difficulties in detecting these flaws with current technology and how much risk the flaws or defects pose to potential flight parts. Using a RoboMet.3D automated serial sectioning system, seeded defects as well as minor process flaws can be imaged and reconstructed in three dimensions to compare to non-destructive evaluation (NDE) techniques, such as x-ray computed tomography (CT), neutron CT, and in-situ monitoring. The RoboMet automates the metallography process by automatically grinding, polishing, and imaging samples in a single system and providing the control data for NDE comparisons to know the real size of defects built into coupons. These comparisons provide an understanding behind the technological limitations of the NDE techniques for different alloys. The same serial sectioning methods have also been utilized to characterize the surfaces of parts to reconstruct the surfaces and take measurements of internal features not easily examined with non-destructive methods. Using the RoboMet, fine lattice structures built with L-PBF have been characterized to determine the actual thicknesses of struts and density of the lattice structures. These structures have been used as finer build supports for the L-PBF process, designs for fine catalysts, and other design considerations for small components. The RoboMet data helps to inform the modeling and design efforts around these fine components.

additive manufacturing↗
DOE OSTI2015

On Baryon-Antibaryon Cross Sections from Initial State Radiation Processes at BABAR and their Surprising Threshold Behavior

BABAR has measured with unprecedented accuracy the e + e - → pp-bar and e + e - → ΛΛ-bar cross sections by means of the initial state radiation technique, which has the advantages of good efficiency and energy resolution, and full angular acceptance in the threshold region. A striking feature of these cross sections is their non-vanishing values at threshold. In the case of charged baryons, the phenomenon is well understood in terms of the Coulomb interaction between the outgoing baryon and antibaryon. However, such an effect is not expected for neutral baryons. We suggest a simple explanation for both charged and neutral baryon pairs based on Coulomb interactions at the valence quark level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2017

PIA and REWIND: Two New Methodologies for Cross Section Adjustment

This paper presents two new cross section adjustment methodologies intended for coping with the problem of compensations. The first one PIA, Progressive Incremental Adjustment, gives priority to the utilization of experiments of elemental type (those sensitive to a specific cross section), following a definite hierarchy on which type of experiment to use. Once the adjustment is performed, both the new adjusted data and the new covariance matrix are kept. The second methodology is called REWIND (Ranking Experiments by Weighting for Improved Nuclear Data). This new proposed approach tries to establish a methodology for ranking experiments by looking at the potential gain they can produce in an adjustment. Practical applications for different adjustments illustrate the results of the two methodologies against the current one and show the potential improvement for reducing uncertainties in target reactors.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗