Search NASA⌕ Search

SEARCH · Search NASA

Results for “soiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Orion Landing Simulation Eight Soil Model Comparison

LS-DYNA finite element simulations of a rigid Orion Crew Module (CM) were used to investigate the CM impact behavior on eight different soil models. Ten different landing conditions, characterized by the combination of CM vertical and horizontal velocity, hang angle, and roll angle were simulated on the eight different soils. The CM center of gravity accelerations, pitch angle, kinetic energy, and soil contact forces were the outputs of interest. The simulation results are presented, with comparisons of the CM behavior on the different soils. The soils analyzed in this study can be roughly categorized as soft, medium, or hard, according to the CM accelerations that occur when landing on them. The soft group is comprised of the Carson Sink Wet soil and the Kennedy Space Center (KSC) Low Density Dry Sand. The medium group includes Carson Sink Dry, the KSC High Density In-Situ Moisture Sand and High Density Flooded Sand, and Cuddeback B. The hard soils are Cuddeback A and the Gantry Unwashed Sand. The softer soils were found to produce lower peak accelerations, have more stable pitch behavior, and to be less sensitive to the landing conditions. This investigation found that the Cuddeback A soil produced the highest peak accelerations and worst stability conditions, and that the best landing performance was achieved on the KSC Low Density Dry Sand.

Mark, Stephen D.↗

Evaluating the Utility of Remotely-Sensed Soil Moisture Retrievals for Operational Agricultural Drought Monitoring

Soil moisture is a fundamental data source used by the United States Department of Agriculture (USDA) International Production Assessment Division (IPAD) to monitor crop growth stage and condition and subsequently, globally forecast agricultural yields. Currently, the USDA IPAD estimates surface and root-zone soil moisture using a two-layer modified Palmer soil moisture model forced by global precipitation and temperature measurements. However, this approach suffers from well-known errors arising from uncertainty in model forcing data and highly simplified model physics. Here we attempt to correct for these errors by designing and applying an Ensemble Kalman filter (EnKF) data assimilation system to integrate surface soil moisture retrievals from the NASA Advanced Microwave Scanning Radiometer (AMSR-E) into the USDA modified Palmer soil moisture model. An assessment of soil moisture analysis products produced from this assimilation has been completed for a five-year (2002 to 2007) period over the North American continent between 23degN - 50degN and 128degW - 65degW. In particular, a data denial experimental approach is utilized to isolate the added utility of integrating remotely-sensed soil moisture by comparing EnKF soil moisture results obtained using (relatively) low-quality precipitation products obtained from real-time satellite imagery to baseline Palmer model runs forced with higher quality rainfall. An analysis of root-zone anomalies for each model simulation suggests that the assimilation of AMSR-E surface soil moisture retrievals can add significant value to USDA root-zone predictions derived from real-time satellite precipitation products.

Bolten, John D.↗

The Biotoxicity of Mars Soils

Recent evidence from the Opportunity and Spirit rovers suggests that the soils on Mars might be very high in biotoxic materials induding sulfate salts, chlorides, and acidifying agents. Yet, very little is known about how the chemistries of Mars soils might affect the survival and growth of terrestrial microorganisms. The primary objectives of the proposed research will be to: (1) prepare and characterize Mars analog soils amended with potential biotoxic levels of sulfates, chlorides, and acidifying minerals; (2) use the stimulants to conduct a series of toxicology assays to determine if terrestrial microorganisms from spacecraft or extreme environments can survive direct exposure to the biotoxic soils, and (3) mix soils from extreme environments on Earth into Mars analog soils to determine if terrestrial microorganisms can grow and replicate under Martian conditions. The Mars analog soils will be thoroughly characterized by a wide diversity of soil chemistry assays to determine the exact nature of the soluble biotoxic components following hydration. The microbial experiments will be designed to test the effects of Mars stimulants on microbial survival, growth and replication during direct challenge experiments. Toxicology experiments will be designed to mimic terrestrial microbes coming into contact with biotoxic soils with and without liquid water. Results are expected to help" ... characterize the limits of life in ... planetary environments ... " and may help constrain the search for life on Mars.

Kerney, Krystal↗

Calculating Soil Wetness, Evapotranspiration and Carbon Cycle Processes Over Large Grid Areas Using a New Scaling Technique

Soil wetness typically shows great spatial variability over the length scales of general circulation model (GCM) grid areas (approx 100 km ), and the functions relating evapotranspiration and photosynthetic rate to local-scale (approx 1 m) soil wetness are highly non-linear. Soil respiration is also highly dependent on very small-scale variations in soil wetness. We therefore expect significant inaccuracies whenever we insert a single grid area-average soil wetness value into a function to calculate any of these rates for the grid area. For the particular case of evapotranspiration., this method - use of a grid-averaged soil wetness value - can also provoke severe oscillations in the evapotranspiration rate and soil wetness under some conditions. A method is presented whereby the probability distribution timction(pdf) for soil wetness within a grid area is represented by binning. and numerical integration of the binned pdf is performed to provide a spatially-integrated wetness stress term for the whole grid area, which then permits calculation of grid area fluxes in a single operation. The method is very accurate when 10 or more bins are used, can deal realistically with spatially variable precipitation, conserves moisture exactly and allows for precise modification of the soil wetness pdf after every time step. The method could also be applied to other ecological problems where small-scale processes must be area-integrated, or upscaled, to estimate fluxes over large areas, for example in treatments of the terrestrial carbon budget or trace gas generation.

Sellers, Piers↗

The NASA Soil Moisture Active Passive (SMAP) Mission - Science and Data Product Development Status

The Soil Moisture Active Passive (SMAP) mission, planned for launch in late 2014, has the objective of frequent, global mapping of near-surface soil moisture and its freeze-thaw state. The SMAP measurement system utilizes an L-band radar and radiometer sharing a rotating 6-meter mesh reflector antenna. The instruments will operate on a spacecraft in a 685 km polar orbit with 6am/6pm nodal crossings, viewing the surface at a constant 40-degree incidence angle with a 1000-km swath width, providing 3-day global coverage. Data from the instruments will yield global maps of soil moisture and freeze/thaw state at 10 km and 3 km resolutions, respectively, every two to three days. The 10-km soil moisture product will be generated using a combined radar and radiometer retrieval algorithm. SMAP will also provide a radiometer-only soil moisture product at 40-km spatial resolution and a radar-only soil moisture product at 3-km resolution. The relative accuracies of these products will vary regionally and will depend on surface characteristics such as vegetation water content, vegetation type, surface roughness, and landscape heterogeneity. The SMAP soil moisture and freeze/thaw measurements will enable significantly improved estimates of the fluxes of water, energy and carbon between the land and atmosphere. Soil moisture and freeze/thaw controls of these fluxes are key factors in the performance of models used for weather and climate predictions and for quantifYing the global carbon balance. Soil moisture measurements are also of importance in modeling and predicting extreme events such as floods and droughts. The algorithms and data products for SMAP are being developed in the SMAP Science Data System (SDS) Testbed. In the Testbed algorithms are developed and evaluated using simulated SMAP observations as well as observational data from current airborne and spaceborne L-band sensors including data from the SMOS and Aquarius missions. We report here on the development status of the SMAP data products. The Testbed simulations are designed to capture various sources of errors in the products including environment effects, instrument effects (nonideal aspects of the measurement system), and retrieval algorithm errors. The SMAP project has developed a Calibration and Validation (Cal/Val) Plan that is designed to support algorithm development (pre-launch) and data product validation (post-launch). A key component of the Cal/Val Plan is the identification, characterization, and instrumentation of sites that can be used to calibrate and validate the sensor data (Level l) and derived geophysical products (Level 2 and higher).

Nloku, E.↗

Numerical Simulation of Rocket Exhaust Interaction with Lunar Soil

This technology development originated from the need to assess the debris threat resulting from soil material erosion induced by landing spacecraft rocket plume impingement on extraterrestrial planetary surfaces. The impact of soil debris was observed to be highly detrimental during NASA s Apollo lunar missions and will pose a threat for any future landings on the Moon, Mars, and other exploration targets. The innovation developed under this program provides a simulation tool that combines modeling of the diverse disciplines of rocket plume impingement gas dynamics, granular soil material liberation, and soil debris particle kinetics into one unified simulation system. The Unified Flow Solver (UFS) developed by CFDRC enabled the efficient, seamless simulation of mixed continuum and rarefied rocket plume flow utilizing a novel direct numerical simulation technique of the Boltzmann gas dynamics equation. The characteristics of the soil granular material response and modeling of the erosion and liberation processes were enabled through novel first principle-based granular mechanics models developed by the University of Florida specifically for the highly irregularly shaped and cohesive lunar regolith material. These tools were integrated into a unique simulation system that accounts for all relevant physics aspects: (1) Modeling of spacecraft rocket plume impingement flow under lunar vacuum environment resulting in a mixed continuum and rarefied flow; (2) Modeling of lunar soil characteristics to capture soil-specific effects of particle size and shape composition, soil layer cohesion and granular flow physics; and (3) Accurate tracking of soil-borne debris particles beginning with aerodynamically driven motion inside the plume to purely ballistic motion in lunar far field conditions. In the earlier project phase of this innovation, the capabilities of the UFS for mixed continuum and rarefied flow situations were validated and demonstrated for lunar lander rocket plume flow impingement under lunar vacuum conditions. Applications and improvements to the granular flow simulation tools contributed by the University of Florida were tested against Earth environment experimental results. Requirements for developing, validating, and demonstrating this solution environment were clearly identified, and an effective second phase execution plan was devised. In this phase, the physics models were refined and fully integrated into a production-oriented simulation tool set. Three-dimensional simulations of Apollo Lunar Excursion Module (LEM) and Altair landers (including full-scale lander geometry) established the practical applicability of the UFS simulation approach and its advanced performance level for large-scale realistic problems.

Liever, Peter↗

Preservation of Lipid Biomarkers Under Prolonged and Extreme Hyperaridity in Atacama Desert Soils

Molecular biomarkers are the most direct biosignatures of life on early Earth and a key target in the search for life on Mars. Lipid biomarkers are of particular interest given their ability to survive oxidative degradation and record microbial presence and activity of microorganisms that occurred billions of years ago (Eigenbrode, 2008). Environmental conditions that suspend biotic and abiotic degradative processes prior to lithification can lead to enhanced biomolecular preservation over geological time-scales. The hyperarid core of the Atacama Desert in northern Chile offers a unique environment to investigate lipid biomarker taphonomy under extreme and prolonged dryness. We investigated the accumulation and degree of preservation of lipid biomarkers in million-year-old hyperarid soils where primarily abiotic conditions influence their taphonomy. Soils were extracted and free and membrane bound lipids were analyzed across a vertical profile of 2.5 meters in the Yungay hyper-arid core of the Atacama Desert. Due to the extremely low inventory of biomass in Atacama soils, samples were collected by scientists wearing cleanroom suits to minimize anthropogenic contamination during sampling. Fatty acids were found to be well preserved in Yungay soils, and were most abundant in the clay-rich soils at approx.2 m depth (approx.750 ng of fatty acid methyl ester/g of soil). These buried clays layers were fluvially deposited approximately 2 million years ago, and have been excluded from exposure to rainwater and modern surficial processes since their emplacement (Ewing et al., 2008). Monocarboxylic fatty acid, monohydroxy fatty acid, glycerol tetraether, and n-alkane hydrocarbon content was found to change with depth. Lipid biomarker content in deeper soil layers is suggestive of soils having been formed at a time when environmental conditions were capable of supporting active microbial communities and plants. In short, total lipid extracts reveal a remarkable degree of lipid biomarker preservation even in the oldest soils analyzed (ca. 2 Myr) indicating that typical diagenetic processes of lipid destruction are arrested under extreme dryness. This result has implications for the search for molecular biomarkers on Mars, which could have experienced millions to billions of years of extreme hyperaridity.

Lipid Biomarkers↗

Global Assessment of the SMAP Level-4 Soil Moisture Product Using Assimilation Diagnostics

The Soil Moisture Active Passive (SMAP) mission Level-4 Soil Moisture (L4_SM) product provides 3-hourly, 9-km resolution, global estimates of surface (0-5 cm) and root-zone (0-100 cm) soil moisture and related land surface variables from 31 March 2015 to present with approx. 2.5-day latency. The ensemble-based L4_SM algorithm assimilates SMAP brightness temperature (Tb) observations into the Catchment land surface model. This study describes the spatially distributed L4_SM analysis and assesses the observation-minus-forecast (O-F) Tb residuals and the soil moisture and temperature analysis increments. Owing to the climatological rescaling of the Tb observations prior to assimilation, the analysis is essentially unbiased, with global mean values of approx. 0.37 K for the O-F Tb residuals and practically zero for the soil moisture and temperature increments. There are, however, modest regional (absolute) biases in the O-F residuals (under approx. 3 K), the soil moisture increments (under approx. 0.01 cu m/cu m), and the surface soil temperature increments (under approx. 1 K). Typical instantaneous values are approx. 6 K for O-F residuals, approx. 0.01 (approx. 0.003) cu m/cu m for surface (root-zone) soil moisture increments, and approx. 0.6 K for surface soil temperature increments. The O-F diagnostics indicate that the actual errors in the system are overestimated in deserts and densely vegetated regions and underestimated in agricultural regions and transition zones between dry and wet climates. The O-F auto-correlations suggest that the SMAP observations are used efficiently in western North America, the Sahel, and Australia, but not in many forested regions and the high northern latitudes. A case study in Australia demonstrates that assimilating SMAP observations successfully corrects short-term errors in the L4_SM rainfall forcing.

Reichle, Rolf↗

Using Data Assimilation Diagnostics to Assess the SMAP Level-4 Soil Moisture Product

The Soil Moisture Active Passive (SMAP) mission Level-4 Soil Moisture (L4_SM) product provides 3-hourly, 9-km resolution, global estimates of surface (0-5 cm) and root-zone (0-100 cm) soil moisture and related land surface variables from 31 March 2015 to present with approx.2.5-day latency. The ensemble-based L4_SM algorithm assimilates SMAP brightness temperature (Tb) observations into the Catchment land surface model. This study describes the spatially distributed L4_SM analysis and assesses the observation-minus-forecast (O-F) Tb residuals and the soil moisture and temperature analysis increments. Owing to the climatological rescaling of the Tb observations prior to assimilation, the analysis is essentially unbiased, with global mean values of approx. 0.37 K for the O-F Tb residuals and practically zero for the soil moisture and temperature increments. There are, however, modest regional (absolute) biases in the O-F residuals (under approx. 3 K), the soil moisture increments (under approx. 0.01 cu m/cu m), and the surface soil temperature increments (under approx. 1 K). Typical instantaneous values are approx. 6 K for O-F residuals, approx. 0.01 (approx. 0.003) cu m/cu m for surface (root-zone) soil moisture increments, and approx. 0.6 K for surface soil temperature increments. The O-F diagnostics indicate that the actual errors in the system are overestimated in deserts and densely vegetated regions and underestimated in agricultural regions and transition zones between dry and wet climates. The O-F auto-correlations suggest that the SMAP observations are used efficiently in western North America, the Sahel, and Australia, but not in many forested regions and the high northern latitudes. A case study in Australia demonstrates that assimilating SMAP observations successfully corrects short-term errors in the L4_SM rainfall forcing.

SMAP↗

Global-scale Evaluation of SMAP, SMOS and ASCAT Soil Moisture Products Using Triple Collocation

Global-scale surface soil moisture products are currently available from multiple remote sensing platforms. Footprint-scale assessments of these products are generally restricted to limited number of densely-instrumented validation sites. However, by taking active and passive soil moisture products together with a third independent soil moisture estimates via land surface modeling, triple collocation (TC) can be applied to estimate the correlation metric of satellite soil moisture products (versus an unknown ground truth) over a quasi-global domain. Here, an assessment of Soil Moisture Active Passive (SMAP), Soil Moisture Ocean Salinity (SMOS) and Advanced SCATterometer (ASCAT) surface soil moisture retrievals via TC is presented. Considering the potential violation of TC error assumptions, the impact of active-passive and satellite-model error cross correlations on the TC-derived inter-comparison results is examined at in situ sites using quadruple collocation analysis. In addition, confidence intervals for the TC-estimated correlation metric are constructed from moving-block bootstrap sampling designed to preserve the temporal persistence of the original (unevenly-sampled) soil moisture time-series. This study is the first to apply TC to obtain a robust global-scale cross-assessment of SMAP, SMOS and ASCAT soil moisture retrieval accuracy in terms of anomaly temporal correlation. Our results confirm the overall advantage of SMAP (with a global average anomaly correlation of 0.76) over SMOS (0.66) and ASCAT (0.63) that has been established in several recent regional, ground-based studies. SMAP is also the best-performing product over the majority of applicable land pixels (52%), although SMOS and ASCAT each shows advantage in distinct geographic regions.

global-scale↗

Recent Updates in the SMAP Level-4 Soil Moisture Algorithm

The NASA Soil Moisture Active Passive (SMAP) mission generates, among other data sets, the Level-4 Soil Moisture (L4_SM) product. The L4_SM data are published with a mean latency of ~2.5 days from the time of observation and provide global, three-hourly, 9-km resolution estimates of surface and root-zone soil moisture and related land surface states and fluxes. The L4_SM algorithm is based on the assimilation of SMAP radiometer brightness temperature observations into the NASA Catchment land surface model using a spatially distributed ensemble Kalman filter (EnKF). In 2018, the L4_SM algorithm was upgraded from Version 3 to Version 4. Underlying the new version is a revised modeling system that includes improved input parameter datasets for land cover, topography, and vegetation height that are based on recent, high-quality, space-borne remote sensing observations. Additionally, SMAP Level-2 soil moisture retrievals and in situ soil moisture measurements were used to calibrate a particular Catchment model parameter that governs the recharge of surface soil moisture from below under non-equilibrium conditions, which brings the model's surface soil moisture more in line with the SMAP Level-2 and in situ soil moisture. Moreover, the calibration of the assimilated SMAP brightness temperatures changed substantially from Version 3 to Version 4, and the "catchment deficit" model variable was removed from the EnKF state vector to avoid degrading the model's groundwater estimates.Considerable effort went into the version upgrade, creating an expectation that the new version is improved over the old version. Indeed, some aspects of the new version are clearly better. However, other aspects are not. In this presentation we summarize the skill of the new and old versions vs. independent in situ measurements and in terms of data assimilation diagnostics, including, for example, the statistics of the (soil moisture) analysis increments and the observation-minus-forecast (brightness temperatures) residuals. We share our experience with trying to improve to the L4_SM product and the lessons learned from the effort.

Reichle, Rolf H.↗

Assimilation of Satellite Soil Moisture for Improved Atmospheric Reanalyses

A newly developed, weakly coupled land and atmosphere data assimilation system for NASA’s Global Earth Observing System model is presented, and used to demonstrate the benefit of assimilating satellite soil moisture into an atmospheric reanalysis. Specifically, Advanced Scatterometer and Soil Moisture Ocean Salinity soil moisture retrievals are assimilated into a system that uses the same model, atmospheric assimilation system, and atmospheric observations as the Modern-Era Retrospective analysis for Research and Applications, version 2 (MERRA-2). The atmosphere is sensitive to soil moisture only under certain conditions. Hence, while the globally averaged model improvements were small, regionally, the soil moisture assimilation induced some substantial improvements. For example, in a large region spanning from western Europe across southern Russia, the soil moisture assimilation decreased the RMSE against independent station observations of daily maximum 2-m temperature (T(sup 2m, sub max)) by up to 0.4 K, and of 2-m specific humidity (q(exp 2m)) by up to 0.5 g/kg. Over all available stations, the mean T(sup 2m, sub max) RMSE was reduced from 2.82 to 2.79 K, while the mean q(exp 2m) RMSE was reduced from 1.25 to 1.20 g/kg. The soil moisture assimilation also reduced the mean RMSE across 29 flux tower sites from 34.2 to 32.6 Wm(exp −2) for latent heating, and from 37.7 to 36.5 Wm(exp −2) for sensible heating. For all variables evaluated, the soil moisture assimilation improved the model at monthly to seasonal, rather than daily, time scales. Based on the above experiments, it is recommended that satellite soil moisture be assimilated into future reanalyses, including the follow-on to MERRA-2.

Clara Draper↗

Impact of Gauge-Based Precipitation Corrections on the Skill of SMAP Level-4 Soil Moisture Estimates

The NASA Soil Moisture Active Passive (SMAP) mission provides observations of L-band (1.4 GHz) passive microwave brightness temperature (Tb) observations at a resolution of ~40 km globally every 2-3 days. These observations are routinely assimilated into the NASA Catchment land surface model to generate the Level-4 Soil Moisture (L4_SM) product, which provides global estimates of surface and root-zone soil moisture, soil temperature, and surface fluxes (among others) at 9-km, 3-hourly resolution with ~2.5-day latency. The Catchment land surface model in the L4_SM algorithm is driven with 0.25°, hourly surface meteorological forcing data from the NASA Goddard Earth Observing System (GEOS) "forward-processing" product. Outside of Africa and the high latitudes, the GEOS precipitation forcing is corrected using the Climate Prediction Center Unified (CPCU) gauge-based, 0.5°, daily precipitation product.Soil moisture estimates from the L4_SM product were previously shown to improve over land model-only estimates that do not benefit from the assimilation of Tb observations, thereby demonstrating the value of assimilating SMAP observations for soil moisture estimation. In this presentation, we further isolate the contribution of the gauge-based precipitation corrections to the skill of the L4_SM soil moisture estimates. Specifically, we compare the skill of the L4_SM soil moisture to that of separate model-only and assimilation estimates obtained without the benefit of the gauge-based precipitation corrections.Preliminary results suggest that the soil moisture skill added by the CPCU-based precipitation corrections primarily depends on the quality of the CPCU precipitation product and is greatest in regions where the CPCU gauge network is dense and reliable. Conversely, in regions where the CPCU product is known to be of poor quality, for example in central Australia, the assimilation of SMAP Tb observations provides the most benefit. The presentation will provide an in-depth evaluation of the soil moisture skill of the model-only and assimilation estimates vs. independent in situ and satellite measurements.

Reichle, Rolf↗

Satellite Monitoring of Global Surface Soil Organic Carbon Dynamics Using the SMAP Level 4 Carbon Product

Soil organic carbon (SOC) is an important metric of soil health and the terrestrial carbon balance. Short‐term climate variations affect SOC through changes in temperature and moisture, which control vegetation growth and soil decomposition. We evaluated a satellite data‐driven carbon model, operating under the NASA Soil Moisture Active‐Passive (SMAP) mission, as a means of monitoring global surface SOC dynamics. The SMAP Level 4 Carbon (L4C) product estimates a daily global carbon budget including surface (0‐ to 5‐cm depth) SOC. We found that the L4C mean latitudinal SOC distribution is generally consistent with alternative assessments from static soil inventory records and dynamic global vegetation models (r ≥ 0.89). Within forest systems, based on inventory data, L4C SOC is most similar in magnitude to litterfall but is correlated with coarse woody debris ( urn:x-wiley:jgrg:media:jgrg21790:jgrg21790-math-0001) and total SOC ( urn:x-wiley:jgrg:media:jgrg21790:jgrg21790-math-0002). L4C SOC is sensitive to seasonal and annual climate variability, with mean residence times that range from 1.5 years in the wet tropics to 17 years in the cold tundra. Incorporating soil moisture retrievals from the SMAP L‐band (1.4 GHz) microwave radiometer within the L4C algorithm provides enhanced soil moisture sensitivity under low‐to‐moderate vegetation cover (<5 kg/sq.m vegetation water content). The L‐band soil moisture had the greatest impact on the L4C carbon budget in semiarid regions, which span almost 60% of the globe and account for substantial variability in the terrestrial carbon sink. The L4C operational product enables prognostic investigations into effects of recent climate trends and anomalies (e.g., droughts and pluvials) on shallow soil carbon dynamics.

K. Arthur Endsley↗

Validation of SMAP L2 passive-only soil moisture products using upscaled in situ measurements collected in Twente, the Netherlands

The Twente region in the east of the Netherlands has a network with twenty soil monitoring stations that has been utilized for validation of the Soil Moisture Active/Passive (SMAP) passive-only soil moisture products. Over the period from April 2015 until December 2018, seven stations covered by the SMAP reference pixels 15 have fairly complete data records. Spatially distributed soil moisture simulations with the Dutch national hydrological model have been utilized for the development of upscaling functions to translate the spatial mean of point measurements to the domain of the SMAP reference pixels. The native and upscaled spatial soil moisture means computed using the in-situ measurements have been adopted as references to assess the performance of the SMAP i) Single Channel Algorithm at Horizontal Polarization (SCA-H), ii) Single Channel Algorithm at Vertical Polarization (SCA-V), and iii) Dual Channel Algorithm (DCA) soil moisture estimates. In the case of the Twente network it was found that the SCA-V soil moisture retrieved SMAP observations collected in the afternoon had the best agreement with the native spatial mean leading to an unbiased Root Mean Squared Error (uRMSE) of 0.059 m3 m-3, whereas for the upscaled in-situ references primarily larger biases were found. These error levels are larger than the mission’s target accuracy of 0.04 m3 m-3, which can be attributed to large over- and underestimation errors (>0.08 m3 m-3) in particular at the end of dry spells and during freezing, respectively. The strong vertical dielectric gradients associated with rapid soil freezing and wetting causes the disparity in soil depth characterized by SMAP and in situ that leads to the large mismatches. Once filtered for frozen conditions and antecedent rainfall the uRMSE improves to 0.043 m3 m-3.

Rogier van der Velde↗

Reflectivity, Emissivity, and Brightness from Multilayered Soil with Linearly Varying Permittivity at P- and L- bands

Passive sensing of root zone soil moisture is theoretically investigated using P and L band frequencies. The soil is considered to be a stratified medium. The reflectivity from the soil surface is found by considering the soil to be composed of a finely layered structure with layer widths that are small compared to a wavelength. A well-known transmission line algorithm is then used to compute the reflectivity at the surface. Emissivity is obtained as (1 – reflectivity). It assumed that the soil is at a constant temperature of 300o K when determining the brightness temperature. A soil moisture profile consisting of two homogeneous layers separated by a layer of linearly varying soil moisture is investigated. The study is made at an incident angle of 40O for horizontal polarization at 0.8 and 1.4 GHz. Two variations of the basic profile are considered: a transition from a layer of lesser moisture to a layer of greater moisture and the opposite. In both cases the P band signal shows greater penetration than the L band case. There is greater penetration in the transition to drier soils. In both cases the L band signals show sensitivity to only the upper surface of the soil as expected.

Ming Li↗

Hygrothermal Material Properties for Soils in Building Science

Saving energy in buildings is top of mind with today s building professionals. Although designing energy-efficient walls and roofs is mostly a no-brainer, ensuring that below-grade foundations do not generate moisture problems has become even more complex, particularly because of how soil is involved. Hygrothermal performance of soils coupled to buildings is complicated because of the dearth of information on soil properties. A computational approach for heat transfer through the ground has been well-defined, and simplified methods have been developed. These approaches, however, generally ignore the transfer of soil moisture, which is not negligible. The intention of an ongoing study at Oak Ridge (TN) National Laboratory, therefore, is to gather, comprehend and adapt soil properties from soil science as well. The obtained information must be applicable to related tasks in building science and validated with hygrothermal calculation tools, where additional plugins to the existing software code WUFI (an acronym for Warme unde Felichte Instructionar, which translates to unsteady heat and moisture) are required. (See the sidebar, opposite page, for specifics on WUFI.)Simulation results from WUFI are being compared with existing thermal-only measurements and are being accomplished with ongoing hygrothermal measurements. The final outcome of the study will be the evaluation of several soil types in several climate zones for a number of basement assembly types. The study will define the type of soil, together with the type of building construction considered most and least reliable with respect to energy consumption and moisture safety. Furthermore, the study will determine the influences that different soils have on total energy loss through the ground.

Kehrer, Manfred↗

Speciation of Mercury and Heavy Metals in Hg-contaminated Soils from Oak Ridge TN - 19426

Mercury is present in various forms in the environments. Mercuric compounds, Hg(II) are found predominant species in soil and water, while elemental mercury, Hg0 is the major species in the atmosphere, and organo-mercury is present mostly in food-chain. The speciation of Hg is important to understand its mobility, bioavailability in soils, sediments and biota and potential toxicity on human and environmental health. A catastrophic Hg spill occurred at the Y-12 National Security Complex (Y-12 Plant) at the Oak Ridge Reservation of the Department of Energy (DOE) in 1960's that contaminated facilities, soil, sediment, surface water, and groundwater within the boundaries of the Y-12 Plant and the downstream environment along the East Fork Poplar Creek (EFPC) at the city of Oak Ridge. It is estimated that 350,000 kg of Hg was released to the environment. The EFPC floodplain soils were reported to contain predominantly cinnabar (HgS) form, but other inorganic and organic Hg species, including Hg0 , HgCl{sub 2}, Hg{sub 2}Cl{sub 2}, HgO and CH{sub 3}Hg{sup +} have been found within the Y-12 Facility boundaries and the 23-km long contaminated EFPC. Over the last 25 years, Hg fluxes from the Y-12 Plant have been reduced by various remediation efforts, nonetheless Hg concentration in water and fish have not declined due to the persistent leaching of Hg from contaminated floodplain soils and sediments. In this work, we performed total elemental analyses and Hg speciation in the floodplain soils and sediments collected along EFPC in Oak Ridge, TN. The objective of the study was to elucidate the distribution of Hg in floodplain soil fractions and the relation with metals including arsenic, copper, zinc and lead. Total elemental; characterization was performed by ICP-MS analysis after with HNO{sub 3} and HF dissolution. Sequential extractions were carried out to extract water-soluble (F1), cation-exchangeable (F2) fractions and those bound to carbonates (F3), reducible oxides (F4) (Mn-oxides), organic matter (F5), amorphous (F6) and crystalline iron oxides (F7) and the residual fraction (F8) containing elemental Hg, non-cinnabar Hg and humic acid-bound Hg. Preliminary studies were conducted with artificially spiked and incubated soils as well as soils contaminated with enriched {sup 200}Hg isotope. The results indicated that Hg is predominantly associated with organic matter, amorphous iron and crystalline oxides and the residual fraction. The total Hg in the first four fractions (F1, F2, F3, and F4) were about 1% of the total Hg, while Hg was found equally bound to organic matter (F5) and crystalline Fe-oxides (F7) that accounted about 20% of total Hg. The Hg associated with amorphous iron oxides (F6) accounted as much as 26% of the total Hg and non-cinnabar Hg accounted about 24% of total Hg (non-cinnabar Hg). The results also indicated positive correlation for As, Cu, Pb and Zn levels with those of Hg. Most As was associated with amorphous Fe-oxides. Cu and Pb were dominant both in organic matter and amorphous oxide fractions. Zn was mostly bound to amorphous Fe-oxide but significant amount of Zn was also found to be associated with organic matter and crystalline Fe-oxides. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗