Search NASA⌕ Search

SEARCH · Search NASA

Results for “solidification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Fabrication and Modeling of Laser Additive Manufactured Materials with Multi-Beam Adaptive Beam Shaping

The objective of this research was to fabricate laser additive manufactured samples using the multi-beam fiber laser array system developed by Optonicus, and to test the ability of existing simulation tools to help understand the influence of various beam configurations on the heat transfer and solidification conditions that control microstructure development during processing. Optonicus produced Inconel 718 samples with two different beam configurations that exhibited dramatically different microstructure characteristics. A simplified analytical model was used in conjunction with microstructure selection theory to relate the differences in beam configuration and process conditions to the changes in microstructure. The analytical model was verified against standard quasi-static solutions and a numerical Computational Fluid Dynamics CFD model and the influence of fluid mechanics on the melt pool geometry was evaluated.

36 MATERIALS SCIENCE↗

Metal Fuel Casting Simulation (Annual Report)

Continuing work to develop the capability to simulate metallic fuel fabrication at Idaho National Laboratory (INL) is presented in this report. Simulations using the Truchas code developed at LANL and the commercial software package FLOW3D were used to evaluate the capabilities necessary for modeling mold filling and solidification of the bench scale caster (BSC). The results suggest that surface tension and the pressure effects of the argon in the mold must both be included in the simulation to obtain results that are qualitatively similar to the experimentally observed rod size and morphology. Effects of viscosity of the liquid metal seem to be relatively unimportant. The possibility of flow of partially solidified material is examined, and may be important for the flow conditions in the BSC. A more general discussion of software requirements is included for casting processes that are suitable for metallic fuel rods. A comparison of current capabilities of Truchas and FLOW3D is presented. Neither of the two codes has all the capabilities needed, and future work will probably use both software packages. A performance and scaling evaluation of FLOW3D indicates that adequate performance can be obtained for this project using multiprocessor hardware.

1.02.02.02↗

Conceptual Design for a Mobile Adaptive Additive Manufacturing In-situ Diagnostic End-Station (MAdAM)

With the importance of additive manufacturing (AM) growing, researchers are interested in characterizing the dynamics of metal solidification in AM processes and its impact on part structure and performance. In-situ AM experiments at Xray facilities allow for the temporal study of these systems but require many different connections, interfaces, and equipment which can take a considerable amount of time and effort to set up, reducing the user’s useful beamtime. It is essential to provide the means for an experiment to achieve the relevant thermal boundary conditions and control the cooling rates to replicate the conditions of the manufacturing process. A team effort defined the overall capabilities and requirements for a mobile adaptive additive manufacturing (MAdAM) in-situ diagnostic end-station that can be used at X-ray facilities. Further, specific details of the key elements of the system are developed. Further iteration and development of details will be needed; the path forward and next steps for such a project is described.

36 MATERIALS SCIENCE↗

Diagnostics and Models for Birthing Stress

Understanding the stress development in fluids as they transition to solids is not well-understood. Computational models are needed to represent "birthing stress" for multiphysics applications such as polymer encapsulation around sensitive electronics and additive manufacturing where these stresses can lead to defects such as cracking and voids. The local stress state is also critical to understand and predict the net shape of parts formed in the liquid phase. In this one-year exploratory LDRD, we have worked towards a novel experimental diagnostic to measure the fluid rheology, degree of solidification, and the solid stress development simultaneously. We debugged and made viable a "first-generation" Rheo-Raman system and used it to characterize two types of solidifying systems: paraffin wax, which crystalizes as it solidifies, and thermoset polymers, which form a network of covalent bonds. We used the paraffin wax as a model system to perform flow visualization studies and did some preliminary modeling of the experiment, to demonstrate the inadequacy of the current modeling approaches. This work will inform an advanced fluid constitutive equation that includes a yield stress, temperature dependence, and an evolving viscosity when we pursue the full proposal, which was funded for FY20.

36 MATERIALS SCIENCE↗

A New Method to Contain Molten Corium in Catastrophic Nuclear Reactor Accidents

The catastrophic nuclear reactor accident at Fukushima damaged public confidence in nuclear energy and a demand for new engineered safety features that could mitigate or prevent radiation releases to the environment in the future. We have developed a novel use of sacrificial material (SM) to prevent the molten corium from breaching containment during accidents as well as a validated, novel, high-fidelity modeling capability to design and optimize the proposed concept. Some new reactor designs employ a core catcher and a SM, such as ceramic or concrete, to slow the molten corium and avoid the breach of the containment. However, existing reactors cannot easily be modified to include these SMs but could be modified to allow injectable cooling materials (current designs are limited to water). The SM proposed in this Laboratory Development Research and Development (LDRD) project is based on granular carbonate minerals that can be used in existing light water reactor plants. This new SM will induce an endothermic reaction to quickly freeze the corium in place, with minimal hydrogen explosion and maximum radionuclide retention. Because corium spreading is a complex process strongly influenced by coupled chemical reactions (with underlying containment material and especially with the proposed SM), decay heat and phase change. No existing tool is available for modeling such a complex process. This LDRD project focused on two research areas: experiments to demonstrate the feasibility of the novel SM concept, and modeling activities to determine the potential applications of the concept to actual nuclear plants. We have demonstrated small-scale to large-scaled experiments using lead oxide (Pb0) as surrogate for molten corium, which showed that the reaction of the SM with molten Pb0 results in a fast solidification of the melt and the formation of open pore structures in the solidified Pb0 because of CO 2 released from the carbonate decomposition.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Manufacturing of Advanced Alnico Magnets for Energy Efficient Traction Drive Motors CRADA Final Report

The primary theme of this Technology Commercialization Fund (TCF) project was refining the pre-alloyed powder processing approach (with alnico 8, modified for higher coercivity) of that came out of the previous Development of Radically Enhanced alnico Magnets (DREaM) project to permit full size net-shape alnico magnets to be produced in a reproducible manner that could allow testing in an advanced Permanent Magnet (PM) drive motor. Previously, a lack of sufficient coercivity in alnico magnets limits their energy product and their application in automotive traction drive motors, despite their high temperature stability. Use of enhanced sintered alnico magnets, instead of rare earth (RE) magnets or larger cast alnico magnets, could lower costs and decrease cooling needs of these motors. Conventional production of the best (aligned) alnico magnets (alnico 9) involves costly directional solidification (DS) and achieves good alignment, but modest energy product (10 MGOe), because of low coercivity. Other limitations of cast alnico 9 magnets are poor mechanical properties and difficulty in scaling special casting molds to mass production. In spite of these problems with alnico 9, a commercial electric motor company, UQM, developed a fully capable traction drive motor that met many 2022 DOE-VTO performance targets, except full speed operation, due to brittle mechanical behavior. While UQM demonstrated an advanced drive motor that used alnico 9, they also encouraged the development of improved alnico, especially for greater coercivity (seeking 2X) and improved mechanical properties. While commercial sintered alnico magnets are less brittle and have improved coercivity, they have an inferior energy product due to their non-aligned, fine-grained microstructure. Thus, full development and up-scaling of well-aligned alnico magnets with a further increase in coercivity and good mechanical properties by a low cost powder processing route became the theme of this TCF project. The processing route for this project involved high-pressure gas atomization, at Ames and Carpenter, of modified alnico 8 compositions, compression molding of the resulting pre-alloyed powders into bulk samples, de-binding and sintering the samples to full density, and a final magneto-thermal treatment of the resulting bulk magnets, at Ames and Arnold Magnetic Technologies, to produce aligned magnets, which were intended for motor testing at UQM and Ford.

42 ENGINEERING↗

Titanate Capacitors for Power Electronics

Titanium alloys were synthesized and coated with oxide dielectric films using anodizing in electrolytic baths. They possess high specific energies based on high charge-densities and high breakdown-electric-fields. These were made into alloy ribbons by rapid solidification by vacuum-spin casting, then anodized to form homogeneous dielectric films that serve as the medium in which electric charges are stored with high specific energy density in electrolytic capacitors. The new energy-dense dielectrics were formed by anodizing homogeneous Ti-Zr-X anode alloys, where X is a combination of Hf, Nb, Mo, Be, and/or Si. Thus homogeneous, dense and essentially-defect-free oxide-glass films were formed, e.g., (Ti-Zr-Hf-Be)O 2 films with high specific energy with stability over a wide voltage range, up to over 300 Volt, at temperatures from cryogenic to over 100 degrees C. When packaged with oxidizing electrolyte the dielectric is self-repairing in the event that accidental defects spring up. This provides reliable high-energy and high power performance with little de-rating, i.e., high reliability and lifetime in pulsed or high-frequency operating conditions.

25 ENERGY STORAGE↗

Nanocrystalline Material (FINEMET) (Rev.01)

Nanocrystalline materials are emerging soft magnetic materials that possess grain sizes on the order of a billionth of a meter and possess extremely useful magnetic properties. These materials fi ll the gap between amorphous materials (without any long-range order) and conventional (coarse-grained) materials. Nanocrystalline alloys are materials on the basis of Fe (iron), Si (silicon), and B (boron), with additions of Nb (niobium) and Cu (copper). Typically, they are produced through a rapid solidification process as a thin, ductile ribbon. Initially the ribbon is in the amorphous state, then crystallized in a subsequent heat treatment to promote nano-crystallization (~10-20 nanometers). Once nano-crystallized, they exhibit low core loss and magnetostriction, while maintaining high saturation induction and permeability. A variety of forms can be manufactured, including toroidal, rectangular, racetrack and block cores.

36 MATERIALS SCIENCE↗

Ab Initio Phase Diagram of Tungsten

The phase diagram of tungsten (W) to a pressure (P) of 2500 GPa is investigated using a comprehensive ab initio approach that includes (i) the calculation of the zero temperature (T) free energies (enthalpies) of different solid structures, (ii) the quantum molecular dynamics simulation of the melting curves of different solid structures, (iii) the derivation of the analytic form for the solid-solid phase transition boundary, and (iv) the simulations of the solidification of liquid W into the final solid states on both sides of the solid-solid phase transition boundary, in order to confirm the corresponding analytic form. There are two solid structures confirmed to be present on the phase diagram of W, the ambient body-centered cubic (bcc) and the high-pressure double hexagonal close-packed (dhcp). At T = 0, the bcc-dhcp transition occurs at 1060 GPa, and the transition boundary has a positive slope dT/dP : the bcc-dhcp-liquid triple point is at (P, T) = (1675 GPa, 23680 K).

36 MATERIALS SCIENCE↗

Development of High Bs Fe-Ni Based Metal Amorphous Nanocomposite by Optimization of Glass Forming Ability

A growing interest in electric vehicles challenges soft magnetic materials to improve efficiency and power density. Metal amorphous nanocomposites (MANCs) have lower coercivities and eddy current losses, allowing for greater efficiency and higher switching frequency. The later allows for high motor speeds and improved power density. However, commercially available and laboratory demonstrated MANCs have shortcomings. Fe-based MANCs, such as FINEMET have excellent magnetic properties, but mechanical properties limit their application in high speed electric motors (HSMs). Fe-Co based MANCs, such as HITPERM, have high saturation inductions and good mechanical properties, but elevated magnetostrictive losses. Co-based MANCs and more recent Fe-Ni based MANCs have low losses and good mechanical properties, but lower saturation inductions (1-1.2 T), that limit power density in HSMs. Recently, much work has explored improving saturation induction in MANCs by increasing the content of magnetic elements, which comes at the cost of glass-forming ability (GFA). These efforts where generally limited to trial and error testing. Additionally, all work to date has focused on Fe-based alloys. In this work, a method of using Thermocalc simulation to locate near-eutectic compositions has been applied to Fe-Ni based alloys. Minima in liquidus temperature and solidification range were found for a ternary composition range and used to identify compositions that retain good GFA as the percentage of magnetic elements is increased. The (Fe 70 Ni 30 ) x (B-Si-Nb) 100-x alloy system for x=82% and x=85% was explored by Thermocalc simulations. This is an increase in magnetic element content compared to previously developed x=80% alloys. 3 compositions in the x=82% system, and 1 alloy in the x=85% system where identified and successfully cast as amorphous ribbon. The amorphous nature of the ribbon was confirmed by a bend test and XRD. Magnetic testing was performed by PPMS to measure saturation induction and Curie temperature of the amorphous material. The Curie temperatures increased to 407-438 °C for the x=82% alloys, and 462 °C for the x=85% alloy. Saturation induction increased to 1.28-1.36 T for the x=82% alloy and 1.48 T for the x=85% alloy, which is a significant improvement over the ~370 °C Curie temperature and 1.2 T saturation of previous Fe-Ni alloy. Crystallization behavior was studied by XRD for the x=85% alloy, showing that crystallization process follows a 2-step process of Amorphous → BCC+FCC+Amorphous → BCC+FCC+Fe 3 B+Fe 23 B 6 . Post annealing magnetic properties were studied by strip testing, and saturation induction as high as 1.48 T was seen after optimal annealing. TEM was used to study structure of as cast and annealed material. 2 alloys with x=82% compositions were identified with an optimal crystalline size of 10-20 nm, while the x=85% alloy had this structure in the as cast state. This opens the possibility of using the alloy in the as cast state, without requiring annealing. In conclusion, alloys with good GFA and improved magnetic properties were identified by Thermocalc simulation.

Krimer, Yuval↗

Nucleation of metastable bcc intermediates

Here it is shown, via simple arguments, that any material which posseses an (equilibrium) body-centered cubic(bcc) structure in it’s phase diagram has the capacity to preferentially nucleate a non-equilibrium bcc structure upon solidification, even at pressures outside of the range of bcc field of stability. For example, Mishin EAM Cu contains a liquid-fcc-bcc triple point at high pressure (Bendict, 2016); counter-intuitively, the system will solidify via a bcc-intermediate even at pressures lower than the triple point. Further, we point out that, without this understanding of the kinetics, the phase boundary of fcc-bcc would be determined inconsistently from experiments that quench a liquid vs. the pathway of solid-solid transformation. While the phenomena of bcc-mediated nucleation has been studied theoretically in the Lennard-Jones system at ambient pressure(P.R. ten Wolde and Frenkel, 1995), and the general case for bcc predominance below melting has been made(Alexander and McTague, 1978), here we investigate the bcc formation behavior near a liquid-fcc-bcc triple point (which requires non-ambient pressure) and ask “how far away from the bcc phase of stability can bcc still nucleate?”

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultra-High-Performance Grout for Encapsulation of HEPA Filters

Ultra-high-performance grout (UHPG) grout appears to be good candidate for solidification and encapsulation of waste containing 99 Tc and 129 I that benefits from low Dobs. The properties that make UHPG a good candidate for encapsulating HEPA filters would make it a good option for microencapsulating other solid secondary waste (SSW) such as granular activated carbon, silver mordenite, and ion exchange resins. Containers made of UHPG would also be good candidates for dry disposal of SSW due to its very low diffusivity which prevents contaminant migration.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The Dynamic of Complex Two-Phase Mixtures During Coarsening: From Dendritic to Bicontinuous Mixtures

Dendrites are tree-like crystals that frequently form during the solidification of castings. In systems with nearly isotropic interfacial energy, these dendrites possess secondary and sometimes even tertiary arms, and lead to morphologically complex two-phase mixtures. Dealloying, in which one component is selectively leached, leads to nanoporous structures that have proven useful for many technological applications. These bicontinuous two-phase mixtures are topologically and morphologically complex with spatially varying mean and Gaussian curvatures. The evolution of these structures during coarsening is of considerable technological importance since the morphology of the dendrites and nanoporous structure sets the properties of the resulting material. During coarsening, the total surface area per volume of the mixture decreases, thus resulting in an increase in the size-scale of the two-phase mixture. The evolution of interfacial morphology of these interconnected two-phase mixtures is being studied using large-scale computer simulations. The simulations are used to develop a theory of coarsening in these systems that will elucidate the impact of the complicated morphology found in dendritic and nanoporous systems on the coarsening process. The experiments employ four-dimensional X-ray microtomography, which enables the morphology of the two-phase mixture to be followed in three dimensions and time (an additional dimension). The experiments also serve as a test of simulations and theory of the coarsening process, as well as to provide initial conditions for the simulations. Through these experiments and theory, we aim to develop a comprehensive description of coarsening in these complex and technologically important two-phase mixtures.

36 MATERIALS SCIENCE↗

Characterization of Embedded Sensors in Stainless Steel Test Articles and Design/Planning for MAGNET Testing

The nuclear industry is pursuing microreactors that can be factory assembled and deployed to remote regions for reliable power generation. One class of microreactors uses a monolithic metal core block coupled to heat pipes for heat rejection, which results in significant thermal stresses in the monolithic structures. This work describes the initial characterization and test plan for evaluating stainless steel test articles fabricated with embedded sensors for measuring heat pipe performance limits, as well as spatially distributed temperatures and strains during electrically heated thermal testing. The electrically heated testing will be performed in the non-nuclear Microreactor Agile Non-Nuclear Testbed and Single Primary Heat Extraction and Removal Emulator facilities located at Idaho National Laboratory. The goals of these tests are to (1) accurately monitor temperature and strain distributions that result from differential thermal expansion in the test articles and (2) quantify heat rejection limits of heat pipes as a function of operating temperature and working fluid during steady-state and transient operations. More generally, the ability to monitor component and system health during microreactor operation is attractive for providing a high sensor density to inform a limited number of microreactor operators to ultimately reduce operation and maintenance costs and move toward semi-autonomous operation. This report discusses the characterization of embedded thermocouples and fiber optic sensors in relevant test articles, including cylindrical pipes and hexagonal monolithic test articles for heat pipe-based reactors. The sensors were embedded by placing them in machined channels and then building up additional material by using ultrasonic additive manufacturing (UAM). UAM is a solid-state welding process that uses downward pressure and a lateral scrubbing motion to bond thin metal foils to a base material layer by layer. The ultrasonic welding process relies on the plastic deformation of the metal—as opposed to typical melting and solidification—to break oxide scales and bond the metal layers. The characterization of these embedded sensors included evaluating fiber optic signal attenuation, observing residual strain in the fibers, investigating microstructural and mechanical aspects, and demonstrating the sensors under various thermal loads and acoustic vibrations. Post-embedding characterization showed a fine grain structure (<1 μm) near the interfaces of the bonded foils as a result of severe deformation from the welding process. A large increase in hardness was observed at the foil interfaces and the fiber/matrix interface compared with the bulk matrix. Even when compared with the SS304 interfaces, the higher hardness observed around the embedded fiber suggests a higher degree of deformation due to the soft metal coating around the silica fiber core. The distributed fiber-optic temperature sensors and embedded thermocouples reliably measured temperature distributions during steady-state and transient thermal testing. The embedded fiber-optic sensors reliably measured strain during both transient and steady-state testing and properly identified resonant frequencies during acoustic testing.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Iodine Retention of Long-chain Organic Iodides on Silver-based Sorbents under DOG and VOG Conditions

The aqueous reprocessing of used nuclear fuel releases four key volatile radionuclides ( 3 H, 14 C, 85 Kr, and 129 I) from the used fuel into the off-gas streams of a reprocessing facility. Some semi-volatile radionuclides such as 106 Ru may also be released into the gas streams. Compliance with US regulations may require removal of these radionuclides from the off-gas streams before their discharge to the environment (Jubin et al. 2017). Iodine is released during multiple unit operations within a plant and can be found in gas streams such as the shear off-gas, dissolver off-gas, vessel off-gas (VOG), and waste solidification off-gas. To achieve DFs >1,000, treatment of the plant off-gas streams must include, at minimum, removal of both the dissolver off-gas and VOG. A 2015 analysis showing that the speciation of iodine in the VOG is primarily composed of organic alkyl iodides and that abatement technology for organic iodides is not well developed has produced increased interest in removing iodine from VOG. The lack of knowledge surrounding iodine removal from the VOG prompted the Office of Nuclear Energy within the US Department of Energy to initiate experimental efforts targeted at understanding organic iodide removal from prototypic VOG streams. In 2018 a joint test plan was developed and issued by Oak Ridge National Laboratory and Idaho National Laboratory. This test plan is intended to guide a multiyear experimental effort that will provide substantial amounts of information about the removal of organic iodides from VOG streams. This document reports on the progress of Idaho National Laboratory and Oak Ridge National Laboratory in the execution of the joint test plan as of the end of fiscal year 2019. Silver-based sorbents are the primary removal technology being characterized, and this report includes data on iodine adsorption by reduced silver-exchanged mordenite (also called silver-exchanged zeolite [AgZ]) (as a baseline iodine sorbent) and silver-functionalized silica aerogel (AgAero or Ag Aerogel) (as an advanced iodine sorbent). Conclusions are preliminary in nature and reflect the ongoing execution of the test plan through close collaboration between the two laboratories.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Report on FY 2020 Welding Parameters Optimization and the Fabrication of Qualified Alloy 709 Welds

Alloy 709 is an attractive candidate construction material for the Sodium Fast Reactor (SFR). As part of the Alloy 709 Intermediate Term Test Program, this work covers the development of the technical basis for weld fabrication and weld qualification of Alloy 709. The phase of research reported herein focused on the issue of weld solidification cracking recently experienced in both experimental heats and a commercial heat of Alloy 709 with relatively high phosphorous levels.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Implementation of Disruptive Designs for Gas Turbine Components Utilizing Additive Manufacturing

Electron beam melting (EBM) is an additive manufacturing process used to print metallic components with complex geometries for aerospace applications. A preheating characteristic enables this technology to avoid large accumulation of residual stress during printing. However, cracking mechanisms particularly in Ni-based superalloys are associated with not only residual stress but also with microstructure (i.e., solidification morphology, transient evolution of γ'). Siemens is committed to AM technology for gas turbine applications. The ability to novel predictive designs of turbine blades would reduce process development time and allow acquisition of key microstructure and performance data early in a design campaign. Siemens initiated a project to establish the design rules for the fabrication of non-printable Nibased superalloys. This phase 1 program demonstrates the feasibility for virtual fabrication of the actual blade geometries through EBM process.

42 ENGINEERING↗

Modeling the Nonlinear Rheology of Polymer Additive Manufacturing

This report summarizes molecular and continuum simulation studies focused on developing physics - based predictive models for the evolution of polymer molecular order during the nonlinear processing flows of additive manufacturing. Our molecular simulations of polymer elongation flows identified novel mechanisms of fluid dissipation for various polymer architectures that might be harnessed to enhance material processability. In order to predict the complex thermal and flow history of polymer realistic additive manufacturing processes, we have developed and deployed a high - performance mesh - free hydrodynamics module in Sandia's LAMMPS software. This module called RHEO – short for Reproducing Hydrodynamics and Elastic Objects – hybridizes an updated - Lagrange reproducing - kernel method for complex fluids with a bonded particle method (BPM) to capture solidification and solid objects in multiphase flows. In combination, our two methods allow rapid, multiscale characterization of the hydrodynamics and molecular evolution of polymers in realistic processing geometries.

36 MATERIALS SCIENCE↗