Search NASA⌕ Search

SEARCH · Search NASA

Results for “structure changes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Local structure of Fe in Fe-doped misfit-layered calcium cobaltite: An X-ray absorption spectroscopy study

Polycrystalline Ca{sub 3}Co{sub 4−x}Fe{sub x}O{sub 9+δ} ceramics (x=0, 0.01, 0.03, 0.05) were fabricated using a simple thermal hydro-decomposition method and a spark plasma sintering technique. Thermoelectric property measurements showed that increasing Fe concentration resulted in a decrease in electrical resistivity, thermopower and thermal conductivity, leading to an improvement in the dimensionless figure-of-merit, >35% for x=0.05 at 1073 K. An X-ray absorption spectroscopy technique was used to investigate the local structure of Fe ions in the Ca{sub 3}Co{sub 4−x}Fe{sub x}O{sub 9+δ} structure for the first time. By fitting data from the extended X-ray absorption fine structure (EXAFS) spectra and analyzing the X-ray absorption near-edge structure (XANES) spectra incorporated with first principle simulation, it was shown that Fe was substituted for Co in the the Ca{sub 2}CoO{sub 3} (rocksalt, RS) layer rather than in the CoO{sub 2} layer. Variation in the thermoelectric properties as a function of Fe concentration was attributed to charge transfer between the CoO{sub 2} and the RS layers. The origin of the preferential Fe substitution site was investigated considering the ionic radii of Co and Fe and the total energy of the system. - Graphical abstract: The Fe K-edge XANES spectra of: (a) experimental result in comparison to the simulated spectra when Fe atoms were substituted in the RS layer; (b) with magnetic moment; (c) without magnetic moment, and in the CoO{sub 2} layer; (d) with magnetic moment and (e) without magnetic moment. Highlights: • Synthesis, structural studies, and thermoelectric properties of Ca{sub 3}Co{sub 4−x}Fe{sub x}O{sub 9+δ}. • Direct evidence for the local structure of the Fe ions in the Ca{sub 3}Co{sub 4−x}Fe{sub x}O{sub 9+δ} using XAS analysis. • EXAFS and XANES analysis showed that Fe was likely to be situated in the RS layer structure. • Changes in TE property with Fe content was due to charge transfer between the CoO{sub 2} and the RS layers. • Total energy calculation showed energetically favorable Fe substitution in the RS layer.

36 MATERIALS SCIENCE↗

Ab initio molecular dynamics of Al irradiation-induced processes during Al{sub 2}O{sub 3} growth

Al bombardment induced structural changes in {alpha}-Al{sub 2}O{sub 3} (R-3c) and {gamma}-Al{sub 2}O{sub 3} (Fd-3m) were studied using ab initio molecular dynamics. Diffusion and irradiation damage occur for both polymorphs in the kinetic energy range from 3.5 to 40 eV. However, for {gamma}-Al{sub 2}O{sub 3}(001) subplantation of impinging Al causes significantly larger irradiation damage and hence larger mobility as compared to {alpha}-Al{sub 2}O{sub 3}. Consequently, fast diffusion along {gamma}-Al{sub 2}O{sub 3}(001) gives rise to preferential {alpha}-Al{sub 2}O{sub 3}(0001) growth, which is consistent with published structure evolution experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Unraveling a Hotspot for TCR Recognition on HLA-A2: Evidence Against the Existence of Peptide-independent TCR Binding Determinants

T cell receptor (TCR) recognition of peptide takes place in the context of the major histocompatibility complex (MHC) molecule, which accounts for approximately two-thirds of the peptide/MHC buried surface. Using the class I MHC HLA-A2 and a large panel of mutants, we have previously shown that surface mutations that disrupt TCR recognition vary with the identity of the peptide. The single exception is Lys66 on the HLA-A2 {alpha}1 helix, which when mutated to alanine disrupts recognition for 93% of over 250 different T cell clones or lines, independent of which peptide is bound. Thus, Lys66 could serve as a peptide-independent TCR binding determinant. Here, we have examined the role of Lys66 in TCR recognition of HLA-A2 in detail. The structure of a peptide/HLA-A2 molecule with the K66A mutation indicates that although the mutation induces no major structural changes, it results in the exposure of a negatively charged glutamate (Glu63) underneath Lys66. Concurrent replacement of Glu63 with glutamine restores TCR binding and function for T cells specific for five different peptides presented by HLA-A2. Thus, the positive charge on Lys66 does not serve to guide all TCRs onto the HLA-A2 molecule in a manner required for productive signaling. Furthermore, electrostatic calculations indicate that Lys66 does not contribute to the stability of two TCR-peptide/HLA-A2 complexes. Our findings are consistent with the notion that each TCR arrives at a unique solution of how to bind a peptide/MHC, most strongly influenced by the chemical and structural features of the bound peptide. This would not rule out an intrinsic affinity of TCRs for MHC molecules achieved through multiple weak interactions, but for HLA-A2 the collective mutational data place limits on the role of any single MHC amino acid side-chain in driving TCR binding in a peptide-independent fashion.

59 BASIC BIOLOGICAL SCIENCES↗

Counting Active Sites on Titanium Oxide-Silica Catalysts for Hydrogen Peroxide Activation through In Situ Poisoning with Phenylphosphonic Acid

Quantifying specific active sites in supported catalysts improves our understanding and assists in rational design. Supported oxides can undergo significant structural changes as surface densities increase from site-isolated cations to monolayers and crystallites, which changes the number of kinetically relevant sites. Herein, TiO x domains are titrated on TiO x –SiO 2 selectively with phenylphosphonic acid (PPA). An ex situ method quantifies all fluid-accessible TiO x , whereas an in situ titration during cis-cyclooctene epoxidation provides previously unavailable values for the number of tetrahedral Ti sites on which H 2 O 2 activation occurs. We use this method to determine the active site densities of 22 different catalysts with different synthesis methods, loadings, and characteristic spectra and find a single intrinsic turnover frequency for cis-cyclooctene epoxidation of (40±7) h -1 . This simple method gives molecular-level insight into catalyst structure that is otherwise hidden when bulk techniques are used.

Eaton, Todd R.↗

New structures of Class II Fructose-1,6-Bisphosphatase from Francisella tularensis provide a framework for a novel catalytic mechanism for the entire class

Class II Fructose-1,6-bisphosphatases (FBPaseII) (EC: 3.1.3.11) are highly conserved essential enzymes in the gluconeogenic pathway of microorganisms. Previous crystallographic studies of FBPasesII provided insights into various inactivated states of the enzyme in different species. Presented here is the first crystal structure of FBPaseII in an active state, solved for the enzyme from Francisella tularensis (FtFBPaseII), containing native metal cofactor Mn 2+ and complexed with catalytic product fructose-6-phosphate (F6P). Another crystal structure of the same enzyme complex is presented in the inactivated state due to the structural changes introduced by crystal packing. Analysis of the interatomic distances among the substrate, product, and divalent metal cations in the catalytic centers of the enzyme led to a revision of the catalytic mechanism suggested previously for class II FBPases. We propose that phosphate-1 is cleaved from the substrate fructose-1,6-bisphosphate (F1,6BP) by T89 in a proximal α-helix backbone (G88-T89-T90-I91-T92-S93-K94) in which the substrate transition state is stabilized by the positive dipole of the $\langle$-helix backbone. Once cleaved a water molecule found in the active site liberates the inorganic phosphate from T89 completing the catalytic mechanism. Additionally, a crystal structure of Mycobacterium tuberculosis FBPaseII (MtFBPaseII) containing a bound F1,6BP is presented to further support the substrate binding and novel catalytic mechanism suggested for this class of enzymes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dipole ordering and ionic conductivity in NASICON-Type Na{sub 3}Cr{sub 2}(PO{sub 4}){sub 3} structures

The aspects of structure, dipole ordering, and ionic conductivity of the Na{sub 3}Cr{sub 2}(PO{sub 4}){sub 3} crystal with the four polymorphic phases (α, α', β, and γ) have been investigated. The features of the α-Na{sub 3}Cr{sub 2}(PO{sub 4}){sub 3} crystal structure and its dipole ordering and relaxation polarization in the low-temperature α and α' phases have been refined. The occurrence of Na{sub 3}Cr{sub 2}(PO{sub 4}){sub 3} dipole ordering in the α and α' phases and high ionic conductivity in the β and γ phases is attributed to the structural changes in the rhombohedral [Me{sub 2}(PO{sub 4}){sub 3}]{sup –3}{sub 3∞} crystal frame upon phase transformations α → α', α' → β, and β → γ. A model for explaining the dipole ordering and ionic conductivity phenomena in Na{sub 3}Cr{sub 2}(PO{sub 4}){sub 3} is proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Manipulation of the Magnetoresistance by Strain in Topological TaSe 3

1D TaSe 3 exhibits many unusual physical properties due to its distorted type-II chains. Ribbon-shaped single crystals can be easily bended along the $b-axis$, forming rings. This study investigates the magnetoresistance (MR) of TaSe 3 up to 60 T in both unbended (ribbon shape) and ring-shaped (bended ribbon) samples. Notable changes are found in the magnetotransport properties between the two different shaped samples. One is that the MR in ring-shaped samples is three orders lower than that in unbended samples under the same sample environment. In addition, linear MR is observed above ≈20 T in ring-shaped samples when the magnetic field is parallel or perpendicular to the rings. Quantum oscillations are also observed as a function of the magnetic field when the magnetic field is applied parallel to rings, possibly due to the Altshuler–Aronov–Spivak effect or the inversion of the lowest Landau level beyond the quantum limit. All these results are related to strain-induced electronic structure change in TaSe 3 , an effective way to tune physical properties in low-dimensional materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

In-Situ Observation of the Formation of Laser-Induced Periodic Surface Structures with Extreme Spatial and Temporal Resolution

Irradiation of solid surfaces with intense ultrashort laser pulses represents a unique way of depositing energy into materials. It allows to realize states of extreme electronic excitation and/or very high temperature and pressure and to drive materials close to and beyond fundamental stability limits. As a consequence, structural changes and phase transitions often occur along unusual pathways and under strongly nonequilibrium conditions. Furthermore, due to the inherent multiscale nature—both temporally and spatially—of these irreversible processes, their direct experimental observation requires techniques that combine high temporal resolution with the appropriate spatial resolution and the capability to obtain good quality data on a single pulse/event basis. In this respect, fourth-generation light sources, namely, short wavelength and short pulse free electron lasers (FELs), are offering new and fascinating possibilities. As an example, this chapter will discuss the results of scattering experiments carried out at the FLASH free electron laser at DESY (Hamburg, Germany), which allowed us to resolve laser-induced structure formation at surfaces on the nanometer to submicron length scale and in temporal regimes ranging from picoseconds to several nanoseconds with sub-picosecond resolution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Manipulating efficient light emission in two-dimensional perovskite crystals by pressure-induced anisotropic deformation

The hybrid nature and soft lattice of organolead halide perovskites render their structural changes and optical properties susceptible to external driving forces such as temperature and pressure, remarkably different from conventional semiconductors. Here, we investigate the pressure-induced optical response of a typical two-dimensional perovskite crystal, phenylethylamine lead iodide. At a moderate pressure within 3.5 GPa, its photoluminescence red-shifts continuously, exhibiting an ultrabroad energy tunability range up to 320 meV in the visible spectrum, with quantum yield remaining nearly constant. First-principles calculations suggest that an out-of-plane quasi-uniaxial compression occurs under a hydrostatic pressure, while the energy is absorbed by the reversible and elastic tilting of the benzene rings within the long-chain ligands. This anisotropic structural deformation effectively modulates the quantum confinement effect by 250 meV via barrier height lowering. The broad tunability within a relatively low pressure range will expand optoelectronic applications to a new paradigm with pressure as a tuning knob.

36 MATERIALS SCIENCE↗

Investigation into the optoelectrical properties of tungsten oxide thin films annealed in an oxygen air

Tungsten oxide (WO{sub x}) thin film have been deposited onto glass substrates using the thermal vacuum evaporation technique, monitored by an annealing process in a variable oxygen atmosphere. Analysis by X-ray diffraction and Raman spectroscopy showed the structural changes from orthorhombic to monoclinic which depend on the annealing temperature and the oxygen content. AFM study shows that the increase of oxygen content leads to a decrease of the root-mean-square from 94.64 nm to 2 nm. Ellipsometric measurements have been used to evaluate the optical constants. Further, it is found that when the oxygen content increases, the band gap of the annealed layer varies from 3.01 eV to 3.52 eV by against, the Urbach energy decreases. The AC conductivity plot showed a universal power law according to the Jonscher model. Moreover, at high frequency semiconductor-to-metallic behavior has been observed. Finally, the effect of annealing in oxygen atmosphere on their structural modifications, morphological, optical properties and electrical conductivity are reported.

36 MATERIALS SCIENCE↗

Electronic Structure and Stability of Quaternary Chalcogenide Semiconductors Derived from Cation Cross-Substitution of II-VI and I-III-VI2 Compounds

Sequential cation cross-substitution in zinc-blende chalcogenide semiconductors, from binary to ternary to quaternary compounds, is systematically studied using first-principles electronic structure calculations. Several universal trends are found for the ternary and two classes of quaternary chalcogenides, for example, the lowest-energy structure always has larger lattice constant a, smaller tetragonal distortion parameter {eta} = c/2a, negative crystal-field splitting at the top of the valence band, and larger band gap compared to the metastable structures for common-row cation substitution. The band structure changes in the cation substitution are analyzed in terms of the band offsets and band character decomposition, showing that although the band gap decreases from binary II-VI to ternary I-III-VI{sub 2} are mostly due to the p-d repulsion in the valence band, the decreases from ternary I-III-VI{sub 2} to quaternary I{sub 2}-II-IV-VI{sub 4} chalcogenides are due to the downshift in the conduction band caused by the wave-function localization on the group IV cation site. We propose that common-row-cation I{sub 2}-II-IV-VI{sub 4} compounds are more stable in the kesterite structure, whereas the widely assumed stannite structure reported in the literature for experimental samples is most likely due to partial disorder in the I-II (001) layer of the kesterite phase.

36 MATERIALS SCIENCE↗

Doping effects of Li-Sb content on the structure and electrical properties of [(Na{sub 0.5}K{sub 0.5}){sub 1-x}(Li){sub x}(Sb){sub x}(Nb){sub 1} {sub -x}O{sub 3}] lead-free piezoelectric ceramics

Highlights: Black-Right-Pointing-Pointer [Na{sub 0.5}K{sub 0.5}]{sub 1-x}(Li){sub x}(Sb){sub x}(Nb){sub 1-x}O{sub 3} were prepared by solid-state reaction method. Black-Right-Pointing-Pointer XRD analysis of the powder suggests the formation of a single-phase material. Black-Right-Pointing-Pointer The crystal structure changes from orthorhombic to tetragonal with increase in x. Black-Right-Pointing-Pointer Dielectric studies show a diffuse phase transition at 100 Degree-Sign C and 330 Degree-Sign C. Black-Right-Pointing-Pointer The composition x = 0.050 shows maximum remanent polarization (Pr {approx} 0.66 C m{sup -2}). -- Abstract: Ceramic samples of [Na{sub 0.5}K{sub 0.5}]{sub 1-x}(Li){sub x}(Sb){sub x}(Nb){sub 1-x}O{sub 3} (NKNLS) (x = 0.04-0.06) were prepared by high temperature solid-state reaction method. X-ray diffraction analysis of the powder samples suggests the formation of a single-phase material with transformation from orthorhombic to tetragonal crystal structure with increase in Sb content. Dielectric studies show a diffuse phase transition about 100 Degree-Sign C and another phase ferroelectric-paraelectric transition at 330 Degree-Sign C. Polarization vs. electric field (P-E) hysteresis studies show maximum remanent polarization (Pr {approx} 0.66 C m{sup -2}) for composition x = 0.05. AC conductivity in the compound increases with increase in temperature which may be attributed due to oxygen vacancies and show negative temperature coefficient of resistance (NTCR) effect.

36 MATERIALS SCIENCE↗

Synchrotron x-ray study of a low roughness and high efficiency K 2 CsSb photocathode during film growth

Reduction of roughness to the nm level is critical of achieving the ultimate performance from photocathodes used in high gradient fields. The thrust of this paper is to explore the evolution of roughness during sequential growth, and to show that deposition of multilayer structures consisting of very thin reacted layers results in an nm level smooth photocathode. Synchrotron x-ray methods were applied to study the multi-step growth process of a high efficiency K 2 CsSb photocathode. We observed a transition point of the Sb film grown on Si at the film thickness of similar to 40 angstrom with the substrate temperature at 100 degrees C and the growth rate at 0.1 Å s -1 . The final K 2 CsSb photocathode exhibits a thickness of around five times that of the total deposited Sb film regardless of how the Sb film was grown. The film surface roughening process occurs first at the step when K diffuses into the crystalline Sb. Furthermore, the photocathode we obtained from the multi-step growth exhibits roughness in an order of magnitude lower than the normal sequential process. X-ray diffraction measurements show that the material goes through two structural changes of the crystalline phase during formation, from crystalline Sb to K 3 Sb and finally to K 2 CsSb.

36 MATERIALS SCIENCE↗

Hall effect in the extremely large magnetoresistance semimetal WTe{sub 2}

We systematically measured the Hall effect in the extremely large magnetoresistance semimetal WTe{sub 2}. By carefully fitting the Hall resistivity to a two-band model, the temperature dependencies of the carrier density and mobility for both electron- and hole-type carriers were determined. We observed a sudden increase in the hole density below ∼160 K, which is likely associated with the temperature-induced Lifshitz transition reported by a previous photoemission study. In addition, a more pronounced reduction in electron density occurs below 50 K, giving rise to comparable electron and hole densities at low temperature. Our observations indicate a possible electronic structure change below 50 K, which might be the direct driving force of the electron-hole “compensation” and the extremely large magnetoresistance as well. Numerical simulations imply that this material is unlikely to be a perfectly compensated system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interplay between electron localization, magnetic order, and Jahn-Teller distortion dictates LiMnO2 phase stability

The development of manganese (Mn)-rich cathodes for Li-ion batteries promises to alleviate potential supply chain bottlenecks in battery manufacturing. Fundamental challenges in Mn-rich cathodes arise from phenomena such as structural changes due to cooperative Jahn-Teller (JT) distortions of in octahedral environments, Mn migration, and phase transformations to spinel-like order, all of which affect the electrochemical performance. These physically complex phenomena motivate an re-examination of the Li-Mn-O rock-salt space, with a focus on the thermodynamics of the prototypical, polymorphs. It is found that the generalized gradient approximation (GGA-PBEsol) and meta-GGA ( ) density functionals with empirically fitted on-site Hubbard corrections yield spurious stable phases for , such as predicting a phase with -like order ( ) to be the ground state instead of the orthorhombic (Pmmn) phase, which is the experimentally known ground state. Accounting for antiferromagnetic order in each structure is shown to have a substantial effect on the total energies and resulting phase stability. By using hybrid-GGA (HSE06) and GGA with self-consistent Hubbard parameters (on-site and inter-site ) calculated from linear response theory, the experimentally observed phase stability trends are recovered. The calculated on-site between Mn- states in the experimentally observed orthorhombic, layered, and spinel phases are significantly smaller than in and disordered layered structures, by within GGA. The smaller values of are shown to be correlated with a collinear ordering of JT distortions, in which all orbitals are oriented in the same direction. This cooperative JT effect can lead to greater electron delocalization from Mn along the states due to increased Mn-O covalency, which contributes to the greater electronic stability compared to the phases with noncollinear JT arrangements. The structures with collinear ordering of JT distortions also generate greater vibrational entropy, which helps stabilize these phases at high temperature. These phases are shown to be strongly insulating with large calculated band gaps , which are computed using HSE06 and .

Kam, Ronald L↗

NON-RADIAL OSCILLATIONS IN M-GIANT SEMI-REGULAR VARIABLES: STELLAR MODELS AND KEPLER OBSERVATIONS

The success of asteroseismology relies heavily on our ability to identify the frequency patterns of stellar oscillation modes. For stars like the Sun this is relatively easy because the mode frequencies follow a regular pattern described by a well-founded asymptotic relation. When a solar-like star evolves off the main sequence and onto the red giant branch its structure changes dramatically, resulting in changes in the frequency pattern of the modes. We follow the evolution of the adiabatic frequency pattern from the main sequence to near the tip of the red giant branch for a series of models. We find a significant departure from the asymptotic relation for the non-radial modes near the red giant branch tip, resulting in a triplet frequency pattern. To support our investigation we analyze almost four years of Kepler data of the most luminous stars in the field (late K and early M type) and find that their frequency spectra indeed show a triplet pattern dominated by dipole modes even for the most luminous stars in our sample. Our identification explains previous results from ground-based observations reporting fine structure in the Petersen diagram and sub-ridges in the period-luminosity diagram. Finally, we find ''new ridges'' of non-radial modes with frequencies below the fundamental mode in our model calculations, and we speculate they are related to f modes.

79 ASTRONOMY AND ASTROPHYSICS↗

Intrinsic metastability of orthorhombic HfTiO{sub 4} in thin film hafnia-titania

Orthorhombic (o) HfTiO{sub 4} is crystallized when sputter deposited hafnia-titania nanolaminates with ultrathin layers and bilayer (HfO{sub 2}){sub 0.5}(TiO{sub 2}){sub 0.5} composition are annealed between 573 and 1173 K. However, o-HfTiO{sub 4} demixes after annealing at 1273 K, a result not predicted from bulk thermodynamics. X-ray diffraction and Raman microscopy are used here to study structural changes as o-HfTiO{sub 4} demixes upon long-term annealing at 1273 K into Ti-doped monoclinic HfO{sub 2} and Hf-doped rutile TiO{sub 2}. We conclude that o-HfTiO{sub 4} crystallized at low temperature is intrinsically metastable. A space group symmetry analysis shows that demixing can be accomplished by a continuous phase transition chain.

36 MATERIALS SCIENCE↗