Search NASA⌕ Search

SEARCH · Search NASA

Results for “subscriptions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Suppression of ferromagnetism governed by a critical lattice parameter in CeTiGe 3 with hydrostatic pressure or V substitution

We combine structural and magnetic measurements to compare the different magnetic phase diagrams between the pressure and substitution studies in CeTiGe 3 . We report on the structural, magnetic, and electrical transport properties of single crystals of CeTi 1–x V x Ge 3 (x = 0, 0.1, 0.2, 0.3, 0.4, 0.9, and 1), and of polycrystalline samples (x = 0.5, 0.6, 0.7, 0.8), as well as structural properties of CeTiGe 3 under pressure up to 9 GPa. The ferromagnetic ordering in CeTiGe 3 is suppressed with V doping in CeTi 1–x V x Ge 3 , and suggests a possible ferromagnetic quantum critical point near x = 0.45. We perform a detailed crystalline electric field (CEF) analysis, and the magnetic susceptibility data in pure CeTiGe 3 and CeVGe 3 can be well explained by the CEF model. The proposed CEF energy levels suggest that there is a gradual change of the ground state from |±5/2 in CeTiGe 3 to |±1/2 in CeVGe 3 , and a suppression of CEF splitting energies near the quantum critical region. When hydrostatic pressure is used instead of chemical substitution, the quantum critical point is avoided by the appearance of magnetic phases above around 4.1 GPa. In the substitution study, the ferromagnetic and antiferromagnetic regions are well separated, whereas they touch in the pressure study. We observe a different trend in the temperature dependence of the resistivity maximum in both studies, suggesting that the CEF splitting energy is suppressed by V substitution but enhanced by pressure. Here, we also observe different responses in lattice constants between the two studies, highlighting the fact that substitution effects cannot be reduced to chemical pressure effects only. Nevertheless, when the magnetic phase diagrams of both hydrostatic pressure and substitution are compared, we find a common critical lattice constant c = 5.78 Å where the ferromagnetic ordering is suppressed in both studies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low-energy nonresonant x-ray scattering of C[subscript 60]

Using a third generation synchrotron, the low-energy electronic structure of C{sub 60} was measured by nonresonant inelastic x-ray scattering. The cross section S({kappa},{omega}) at {kappa}=1.0 {angstrom}{sup -1} reveals a significant peak at 2.1 eV inaccessible to optical absorption due to selection rules but consistent with measurements done by nonlinear optics and electron energy-loss spectroscopy. The experiment was modeled by a Hubbard model for a single C{sub 60} molecule with U/t=4. This simple model captures the essential physics.

36 MATERIALS SCIENCE↗

Pressure-induced valence change in YbAl[subscript 3]: A combined high-pressure inelastic x-ray scattering and theoretical investigation

High-resolution x-ray-absorption (XAS) experiments in the partial fluorescence yield mode (PFY) and resonant inelastic x-ray emission (RXES) measurements were performed on the intermediate-valence compound YbAl{sub 3} under pressure of up to 38 GPa. The results of the YbAl{sub 3} PFY-XAS and RXES studies show that the valence of Yb increases smoothly from 2.75 at ambient pressure to 2.93 at 38 GPa. In situ angle-dispersive synchrotron high-pressure x-ray-diffraction experiments carried out using a diamond cell at room temperature show that the ambient pressure cubic phase is stable up to 40 GPa. The results obtained from self-interaction corrected local spin density-functional calculations to understand the pressure effect on the Yb valence and compressibility are in good agreement with the experimental results.

36 MATERIALS SCIENCE↗

Magnetic structure of Dy[superscript 3+] in hexagonal multiferroic DyMnO[subscript 3]

Element specific x-ray resonant magnetic scattering (XRMS) investigations were undertaken to determine the magnetic structure of the multiferroic compound, hexagonal DyMnO{sub 3}. In the temperature range from 68 K down to 8 K the Dy{sup 3+} moments are aligned and antiferromagnetically correlated in the c direction according to the magnetic representation {Gamma}{sub 3}. The temperature dependence of the observed intensity can be modeled assuming the splitting of ground-state doublet crystal-field levels of Dy{sup 3+} by the exchange field of Mn{sup 3+}. XRMS together with magnetization measurements indicate that the magnetic representation is {Gamma}{sub 2} below 8 K.

36 MATERIALS SCIENCE↗

Pressure-induced loss of electronic interlayer state and metallization in the ionic solid Li[subscript 3]N: Experiment and theory

Results of x-ray diffraction and nitrogen K-edge x-ray Raman scattering (XRS) investigations of the crystal and electronic structure of ionic compound Li{sub 3}N across two high-pressure phase transitions [A. Lazicki et al., Phys. Rev. Lett. 95, 165503 (2005)] are interpreted using density-functional theory. A low-energy peak in the XRS spectrum which is observed in both low-pressure hexagonal phases of Li3N and absent in the high-pressure cubic phase is found to originate from an interlayer band similar to the important free-electron-like state present in the graphite and graphite intercalated systems, but not observed previously in ionic insulators. XRS detection of the interlayer state is made possible because of its strong hybridization with the nitrogen p bands. A pressure-induced increase in the band gap of the high-pressure cubic phase of Li{sub 3}N is explained by the differing pressure dependencies of different quantum-number bands and is shown to be a feature of several low-Z closed-shell ionic materials.

36 MATERIALS SCIENCE↗

Atomic structure of nanometer-sized amorphous TiO[subscript 2]

Amorphous titania (TiO{sub 2}) is an important precursor for synthesis of single-phase nanocrystalline anatase. We synthesized amorphous titania by hydrolysis of titanium ethoxide at the ice point. Transmission electron microscopy examination and nitrogen gas adsorption indicated that the particle size of the synthesized titania is -2 nm. Synchrotron wide-angle x-ray scattering (WAXS) was used to probe the atomic correlations in this amorphous sample. Atomic pair-distribution function (PDF) derived from Fourier transform of the WAXS data was used for reverse Monte Carlo (RMC) simulations of the atomic structure of the amorphous TiO{sub 2} nanoparticles. Molecular-dynamics simulations were used to generate input structures for the RMC. X-ray-absorption spectroscopy (XAS) simulations were used to screen candidate structures obtained from the RMC by comparing with experimental XAS data. The structure model that best describes both the WAXS and XAS data shows that amorphous TiO{sub 2} particles consist of a highly distorted shell and a small strained anataselike crystalline core. The average coordination number of Ti is 5.3 and most Ti-O bonds are populated around 1.940 {angstrom}. Relative to bulk TiO{sub 2}, the reduction in the coordination number is primarily due to the truncation of the Ti-O octahedra at the amorphous nanoparticle surface and the shortening of the Ti-O bond length to the bond contraction in the distorted shell. The pre-existence of the anataselike core may be critical to the formation of single-phase nanocrystalline anatase in crystallization of amorphous TiO{sub 2} upon heating.

43 PARTICLE ACCELERATORS↗

Iron oxidation state of FeTiO[subscript 3] under high pressure

The oxidation state of iron in FeTiO{sub 3} under high pressure was investigated by combining x-ray diffraction, Moessbauer spectroscopy, x-ray-absorption spectroscopy, and density-functional theory based calculations. Our results demonstrate that the ilmenite-to-perovskite phase transition occurs above 20 GPa at room temperature and on compression two phases coexist to 40 GPa. The Fe{sup 3+}/{Sigma}Fe ratio increases up to 16 GPa, probably attributed to the d-electron drifting of cations via the oxygen bridge in the adjacent octahedral, then decreases at higher pressure due to the ilmenite-to-perovskite phase transition accompanied by a slight decrease in iron valence state. Our ab initio calculations further show that the most significant changes in the charge distribution in FeTiO{sub 3} are associated with Ti and O.

36 MATERIALS SCIENCE↗

Experimental and ab initio structural studies of liquid Zr[subscript 2]Ni

High-energy x-ray diffraction and ab initio molecular-dynamics simulations demonstrate that the short-range order in the deeply undercooled Zr{sub 2}Ni liquid is quite nuanced. The second diffuse scattering peak in the total structure factory sharpens with supercooling, revealing a shoulder on the high-Q side that is often taken to be a hallmark of increasing icosahedral order. However, a Voronoi tessellation indicates that only approximately 3.5% of all the atoms are in an icosahedral or icosahedral-like environment. In contrast, a Honeycutt-Andersen analysis indicates that a much higher fraction of the atoms is in icosahedral (15%--18%) or distorted icosahedral (25%--28%) bond-pair environments. These results indicate that the liquid contains a large population of fragmented clusters with pentagonal and distorted pentagonal faces, but the fully developed icosahedral fragments are rare. Interestingly, in both cases, the ordering changes little over the 500 K of cooling. All metrics show that the nearest-neighbor atomic configurations of the most deeply supercooled simulated liquid (1173 K) differ topologically and chemically from those in the stable C16 compound, even though the partial pair distributions are similar. The most significant structural change upon decreasing the temperature from 1673 to 1173 K is an increase in the population of Zr in Ni-centered clusters. The structural differences between the liquid and the C16 increase the nucleation barrier, explaining glass formation in the rapidly quenched alloys.

36 MATERIALS SCIENCE↗

High-pressure behavior of TiO[subscript 2] as determined by experiment and theory

Using high-resolution synchrotron x-ray powder diffraction we have investigated the structural phase transitions and equations of state of titanium dioxide (TiO{sub 2}) under high pressure before and after heating at high temperature. The phase sequence we observe experimentally is as follows: rutile (RT){yields}columbite (CB){yields}baddeleyite (MI){yields}orthorhombic I (OI){yields}orthorhombic II (OII). The equations of state as determined from our experiments are consistent with previous measurements and computations. The only exception is the OII phase for which we find a significantly lower room-pressure bulk modulus (K{sup 0}) of 312 ({+-}34) GPa and room-pressure volume (V{sub 0}) of 25.28 ({+-}0.35) {angstrom}{sup 3} as compared to previous experiments. We find that the volume decreases across the OI{yields}OII phase transition at room temperature by -8.3%, in very good agreement with our static first-principles calculations which predict volume changes of 8.2% and 7.6% for local-density approximation and generalized gradient approximation, respectively. This volume collapse is significantly higher than previously determined but consistent with the volume decrease observed in other dioxides across this transition.

43 PARTICLE ACCELERATORS↗

Experimental and theoretical investigation of ThGeO[subscript 4] at high pressure

We report here the combined results of angle-dispersive x-ray diffraction experiments performed on ThGeO{sub 4} up to 40 GPa and total-energy density-functional theory calculations. Zircon-type ThGeO{sub 4} is found to undergo a pressure-driven phase transition at 11 GPa to the tetragonal scheelite structure. A second phase transition to a monoclinic M-fergusonite type is found beyond 26 GPa. The same transition has been observed in samples that crystallize in the scheelite phase at ambient pressure. No additional phase transition or evidence of decomposition of ThGeO{sub 4} has been detected up to 40 GPa. The unit-cell parameters of the monoclinic high-pressure phase are a = 4.98(2) {angstrom}, b = 11.08(4) {angstrom}, c = 4.87(2) {angstrom}, and {beta} = 90.1(1), Z = 4 at 28.8 GPa. The scheelite-fergusonite transition is reversible and the zircon-scheelite transition nonreversible. From the experiments and the calculations, the room-temperature equation of state for the different phases is also obtained. The anisotropic compressibility of the studied crystal is discussed in terms of the differential compressibility of the Th-O and Ge-O bonds.

36 MATERIALS SCIENCE↗

High-pressure stability and compressibility of APO[subscript 4] (A=La, Nd, Eu, Gd, Er, and Y) orthophosphates: An x-ray diffraction study using synchrotron radiation

Room-temperature angle-dispersive x-ray diffraction measurements on zircon-type YPO{sub 4} and ErPO{sub 4}, and monazite-type GdPO{sub 4}, EuPO{sub 4}, NdPO{sub 4}, and LaPO{sub 4} were performed in a diamond-anvil cell up to 30 GPa using neon as pressure-transmitting medium. In the zircon-structured oxides we found evidence of a reversible pressure-induced structural phase transformation from zircon to a monazite-type structure. The onset of the transition is at 19.7 GPa in YPO{sub 4} and 17.3 GPa in ErPO{sub 4}. In LaPO{sub 4} a nonreversible transition is found at 26.1 GPa and a barite-type structure is proposed for the high-pressure phase. For the other three monazites studied, their structures were found to be stable up to 30 GPa. Evidence for additional phase transitions or chemical decomposition of the materials was not found in the experiments. The equations of state and axial compressibility for the different phases are also determined. In particular, we found that in a given compound the monazite structure is less compressible than the zircon structure. This fact is attributed to the higher packing efficiency of monazite versus zircon. The differential bond compressibility of different polyhedra is also reported and related to the anisotropic compressibility of both structures. Finally, the sequence of structural transitions and compressibilities are discussed in comparison with other orthophosphates.

36 MATERIALS SCIENCE↗

High-pressure structural study of fluoro-perovskite CsCdF[subscript 3] up to 60 GPa: A combined experimental and theoretical study

The structural behavior of CsCdF{sub 3} under pressure is investigated by means of theory and experiment. High-pressure powder x-ray diffraction experiments were performed up to a maximum pressure of 60 GPa using synchrotron radiation. The cubic Pm{sub 3}{sup -} m crystal symmetry persists throughout this pressure range. Electronic structure calculations were carried out using the full-potential linear muffin-tin orbital method within the local-density approximation and the generalized gradient approximation for exchange and correlation effects. The calculated ground-state properties - the equilibrium lattice constant, bulk modulus and elastic constants - are in good agreement with experimental results. The calculations reveal that CsCdF{sub 3} is an indirect-gap insulator under ambient conditions, with the gap increasing under pressure.

36 MATERIALS SCIENCE↗

Theoretical and experimental study of the structural stability of TbPO[subscript 4] at high pressures

We have performed a theoretical and experimental study of the structural stability of terbium phosphate at high pressures. Theoretical ab initio total-energy and lattice-dynamics calculations together with x-ray diffraction experiments have allowed us to completely characterize a phase transition at {approx}9.8 GPa from the zircon to the monazite structure. Furthermore, total-energy calculations have been performed to check the relative stability of 17 candidate structures at different pressures and allow us to propose the zircon {yields} monazite {yields} scheelite {yields} SrUO{sub 4}-type sequence of stable structures with increasing pressure. In this sequence, sixfold P coordination is attained for the SrUO{sub 4}-type structure above 64 GPa. The whole sequence of transitions is discussed in association with the high-pressure structural behavior of oxides isomorphic to TbPO{sub 4}.

36 MATERIALS SCIENCE↗