Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface codes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Aerosol Resuspension Model for MELCOR for Fusion and Very High Temperature Reactor Applications

Dust is generated in fusion reactors from plasma erosion of plasma facing components within the reactor’s vacuum vessel (VV) during reactor operation. This dust collects in cooler regions on interior surfaces of the VV. Because this dust can be radioactive, toxic, and/or chemically reactive, it poses a safety concern, especially if mobilized by the process of resuspension during an accident and then transported as an aerosol though out the reactor confinement building, and possibly released to the environment. A computer code used at the Idaho National Laboratory (INL) to model aerosol transport for safety consequence analysis is the MELCOR code. A primary reason for selecting MELCOR for this application is its aerosol transport capabilities. The INL Fusion Safety Program (FSP) organization has made fusion specific modifications to MELCOR. Recent modifications include the implementation of aerosol resuspension models in MELCOR 1.8.5 for Fusion. This paper presents the resuspension models adopted and the initial benchmarking of these models.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Materials Design and Discovery: Catalysis and Energy Storage (Mira Early Science Program Final Technical Report): ALCF-2 Early Science Program Technical Report

The investigation and design of new classes of materials for energy and catalysis requires a multi-facetted approach to simulation. Multiple methods are needed to study materials on the length scale 0.1 nm - 10 nm. For simulations where the atomic (and electronic) degrees of freedom are relevant, the methods of choice in the surface science, condensed matter physics, and material science communities are classical molecular dynamics (CMD), Density Functional Theory (DFT), and quantum Monte Carlo (QMC). The original scope for this Early Science Program (ESP) project was to perform fast-accurate DFT calculations on materials for energy and catalysis using the GPAW code on Blue Gene/Q. The types of calculations included significantly reduced time-to-solution on systems sizes accessible on Blue Gene/P (~10, 0000 valence electrons), but also systems which were were at least a factor of two larger (~20, 000 valence electrons). GPAW is a real-space DFT code using the projector augmented wave (PAW) method. DFT calculations on Blue Gene/P were executed on over >100, 000 cores using GPAW; thus it was consider a success on Mira’s predecessor system, Intrepid. One of the co-PIs (NAR), determined that the work necessary to allow the GPAW code for these aforementioned types of calculations could not be accomplish within the time frame of the ESP. This was not simply due to human time required to implement OpenMP parallelism, but also from intrinsic algorithmic limitations in supporting libraries, most notably ScaLAPACK. Additionally, the return-on-investment on $\mathcal{O}(N^3)$ DFT code has become some what tenable at best. NAR argues that what is really needed in preparation for exascale computing and to enable high-fidelity materials research is robust reduced scaling, $\mathcal{O}$(N) or $\mathcal{O}$(N)log(N), DFT approaches. Thus, in agreement with the other co-PIs, the decision was made to purse QMC as a complimentary method on Mira since it would be valuable for the scientific community and could easily leverage the massive parallelism that would be provided by the Blue Gene/Q. We note that the two other atomic-scale methods mentioned here, CMD and DFT, are being pursued by other ESP projects on Mira. The remainder of this report will focus on our progress on QMC.

Benali, Anouar↗

MCNP6 Cerenkov Radiation Feature Verification

The MCNP6 code has being upgraded to treat Cerenkov radiation emission. Emission is performed using the Frank-Tamm Cerenkov theory with piecewiseconstant coefficients. This document discusses preliminary verification efforts for the Cerenkov feature. Tests were conducted using MCNP6 version MCNP6_Beta3_branch_r. The Frank-Tamm formulation has been coded in an auxiliary Perl script cr.pl. Comparisons of the photon production per wavelength bin and the aggregate photon production are made for 4-MeV electrons and 4000- MeV alphas in water using MCNP6 and cr.pl. The agreement is excellent. Verification calculations for the spectrum of light emerging from the surface of the water are presented for constant, Cauchy, and Sellmeier treatments of the refractive index. Efforts to conduct validation studies were limited by lack of time and limited useful measured data.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Report of the Atmosphere to Electrons Land-Based Mesoscale-to-Microscale Coupling Project (FY2020)

The overall goal of the Mesoscale-to-Microscale Coupling (MMC) project is to improve coupling between mesoscale and microscale simulations via improved guidance and new strategies for setting up simulations and for the development of new tools that can be used across the community. Including the mesoscale forcing is critical to modeling the full energy transfer across scales in the atmosphere. The project-specific objectives include: 1) To apply rigorous verification and validation (V&V) techniques to the new modeling tools that are developed as part of the project to ensure the accuracy of our codes and results and to develop estimates of the relative uncertainty. 2) To improve computational performance of the coupled MMC models through the development of methods that can be used to reduce turbulence spin-up time and hence the size of computational domains. 3) To improve representation of the surface layer in microscale models to enhance simulations of hub-height wind speed. 4) To develop guidance for the community describing the best ways to couple mesoscale and microscale models, including specific spatial scales at which the handoff to the microscale model should occur. 5) To prepare documentation and a suite of software tools that can be used across the community. And 6) To transition MMC research to the offshore environment. Major progress was made in each of these areas during FY20. The land-based portion of the project is reported herein, while the offshore portion will be reported separately. The team continued to advance the MMC tools and methodologies as well as to document their performance in journal papers and conference presentations, although several planned conferences were cancelled due to the COVID-19 pandemic.

54 ENVIRONMENTAL SCIENCES↗

Two-Phase Turbulence Statistics from High Fidelity Dispersed Droplet Flow Simulations in a Pressurized Water Reactor (PWR) Sub-Channel with Mixing Vanes

In the dispersed flow film boiling regime (DFFB), which exists under post-LOCA (loss-of-coolant accident) conditions in pressurized water reactors (PWRs), there is a complex interplay between droplet dynamics and turbulence in the surrounding steam. Experiments have accredited particular significance to droplet collision with the spacer-grids and mixing vane structures and their consequent positive feedback to the heat transfer recorded in the immediate downstream vicinity. Enabled by high-performance computing (HPC) systems and a massively parallel finite element-based flow solver—PHASTA (Parallel Hierarchic Adaptive Stabilized Transient Analysis)—this work presents high fidelity interface capturing, two-phase, adiabatic simulations in a PWR sub-channel with spacer grids and mixing vanes. Selected flow conditions for the simulations are informed by the experimental data found in the literature, including the steam Reynolds number and collision Weber number (Wec={40,80}), and are characteristic of the DFFB regime. Data were collected from the simulations at an unprecedented resolution, which provides detailed insights into the continuous phase turbulence statistics, highlighting the effects of the presence of droplets and the comparative effect of different Weber numbers on turbulence in the surrounding steam. Further, axial evolution of droplet dynamics was analyzed through cross-sectionally averaged quantities, including droplet volume, surface area and Sauter mean diameter (SMD). The downstream SMD values agree well with the existing empirical correlations for the selected range of Wec. The high-resolution data repository from the simulations herein is expected to be of significance to guide model development for system-level thermal hydraulic codes.

Saini, Nadish↗

The Energy Loss of Li and C Ions with MeV Energies in the Polycarbonate and Polypropylene

Stopping power and straggling of Li ions and C ions at mean energy 3.8-5.4 MeV and 5.6-6.9 MeV, respectively, in polycarbonate (PC) and at mean energy 3.7-5.2 MeV and 6.8-8.0 MeV in polypropylene (PP) foils have been measured using ion beams from a Tandetron 4130 MC accelerator. The ions scattered from a thin, primary gold target were registered by a surface barrier detector partially covered with a thin foil of the investigated polymer. The stopping power was determined from the energy difference between the signals from the ions directly backscattered from the Au layer and the ions backscattered and slowed down in the foil. The foil thickness was determined by the weighing procedure. The experimentally determined stopping powers were compared with those calculated with the SRIM 2010 code. The measured stopping powers are in good agreement for Li and C in PC, the differences being within 0.1-1.6% for Li and 0.2-2.1% for C. For Li and C in PP, the stopping powers are lower than the calculated ones, the differences being within 0.5-2.8% for Li and 3.6-6.1% for C. The energy straggling was determined from the width of the RBS signals. The experimentally determined energy straggling was found to fluctuate around the values calculated according to Bohr theory.

36 MATERIALS SCIENCE↗

Predicting Ice Sheet and Climate Evolution at Extreme Scales

A main research objectives of PISCEES is the development of formal methods for quantifying uncertainties in ice sheet modeling. Uncertainties in simulating and projecting mass loss from the polar ice sheets arise primarily from initial conditions, surface and basal boundary conditions, and model parameters. In general terms, two main chains of uncertainty propagation may be identified: 1. inverse propagation of observation and/or prior onto posterior control variable uncertainties; 2. forward propagation of prior or posterior control variable uncertainties onto those of target output quantities of interest (e.g., climate indices or ice sheet mass loss). A related goal is the development of computationally efficient methods for producing initial conditions for an ice sheet that are close to available present-day observations and essentially free of artificial model drift, which is required in order to be useful for model projections (“initialization problem”). To be of maximum value, such optimal initial states should be accompanied by “useful” uncertainty estimates that account for the different sources of uncerainties, as well as the degree to which the optimum state is constrained by available observations. The PISCEES proposal outlined two approaches for quantifying uncertainties. The first targets the full exploration of the uncertainty in model projections with sampling-based methods and a workflow managed by DAKOTA (the main delivery vehicle for software developed under QUEST). This is feasible for low-dimensional problems, e.g., those with a handful of global parameters to be inferred. This approach can benefit from derivative/adjoint information, but it is not necessary, which is why it often referred to as “non-intrusive”. The second approach makes heavy use of derivative information from model adjoints to address quantifying uncertainty in high-dimensions (e.g., basal boundary conditions in ice sheet models). The use of local gradient, or Hessian information (i.e., second derivatives of the cost function), requires additional code development and implementation, and is thus often referred to as an “intrusive” approach. Within PISCEES, MIT has been tasked to develop methods for derivative-based UQ, the ”intrusive” approach discussed above. These methods rely on the availability of first (adjoint) and second (Hessian) derivative code, developed through intrusive methods such as algorithmic differentiation (AD). While representing a significant burden in terms of code development, derivative-baesd UQ is able to cope with very high-dimensional uncertainty spaces. That is, unlike sampling methods (all variations of Monte Carlo), calculational burden is independent of the dimension of the uncertainty space. This is a significant advantage for spatially distributed uncertainty fields, such as threedimensional initial conditions, three-dimensional parameter fields, or two-dimensional surface and basal boundary conditions. Importantly, uncertainty fields for ice sheet models generally fall into this category.

97 MATHEMATICS AND COMPUTING↗

A common origin for globular clusters and ultra-faint dwarfs in simulations of the first galaxies

In this paper, the first in a series on galaxy formation before reionization, we focus on understanding what determines the size and morphology of stellar objects in the first low-mass galaxies, using parsec-scale cosmological simulations performed with an adaptive mesh hydrodynamics code. Although the dense gas in which stars are formed tends to have a disk structure, stars are found in spheroids with little rotation. Halos with masses between 10{sup 6} M{sub ⊙} and 5×10{sup 8} M{sub ⊙} form stars stochastically, with stellar masses in the range 10{sup 4} M{sub ⊙} to 2×10{sup 6} M{sub ⊙}. We observe, nearly independent of stellar mass, a large range of half-light radii for the stars, from a few parsecs to a few hundred parsecs and surface brightnesses and mass-to-light ratios ranging from those typical of globular clusters to ultra-faint dwarfs. In our simulations, stars form in dense stellar clusters with high gas-to-star conversion efficiencies and rather uniform metallicities. A fraction of these clusters remain bound after the gas is removed by feedback, but others are destroyed, and their stars, which typically have velocity dispersions of 20–40 km s{sup −1}, expand until they become bound by the dark matter halo. We thus speculate that the stars in ultra-faint dwarf galaxies may show kinematic and chemical signatures consistent with their origin in a few distinct stellar clusters. On the other hand, some globular clusters may form at the center of primordial dwarf galaxies and may contain dark matter, perhaps detectable in the outer parts.

79 ASTRONOMY AND ASTROPHYSICS↗

Self‐consistent transport simulation of boron dust particle injection in the peripheral plasma in Large Helical Device

Abstract The trajectories and the ablation positions of boron dust particles dropped from an impurity powder dropper in the peripheral plasma in the Large Helical Device (LHD) were calculated using a three‐dimensional edge plasma simulation code (EMC3‐EIRENE) and a dust transport simulation code (DUSTT). The simulation shows that the trajectory of the boron dust particles is deflected at the upper divertor leg due to the effect of the hydrogen plasma flow, and the ablation positions of the dust particles in an ergodic layer change toward the outboard side of the torus for higher plasma densities. The effect of the boron ion flow in the divertor leg on the deflection is investigated by coupling the two codes self‐consistently. The simulation predicts that the boron ions in the divertor leg, which are produced by sputtering on the divertor plates, which do not affect the change in the ablation positions. It also shows that the ablation positions move toward the inboard side and approach the Last Closed Flux Surface (LCFS) in case of increased boron dust drop rates, which is caused by the lowered plasma flow in the upper divertor leg due to the lowered electron temperature by radiation cooling by the dropped dust particles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

CO 2 mineralization in volcanogenic sandstones: geochemical characterization of the Etchegoin formation, San Joaquin Basin

Abstract Volcanogenic sandstones are typically rich in volcanic rock fragments that can provide reactive minerals for CO 2 mineralization in a scenario of CO 2 sequestration. To quantitatively evaluate the extent and time scale of CO 2 mineralization in potential reservoir formations, we characterized example high‐porosity volcanic sand from the San Joaquin Valley of southern Central California. Samples were collected from the volcanic‐rich members of the Etchegoin Formation in the San Joaquin Basin near Coalinga, California. Thin sections made from these samples were examined under petrographic microscope to identify mineral compositions, and then scanning electron microscopy (SEM) and energy dispersive x‐ray spectroscopy (EDX) were used to gather quantitative information on mineral abundances, distribution, and reactive surface areas. Porosity and permeability were also measured using core plugs made from outcrop samples. Results show that the Etchegoin volcanic sandstone has a high percentage (10–15%) of reactive minerals (pyroxenes, Fe‐Ti spinel and clays), and high reactive surface areas at about 1 m 2 /kg. Reactive transport modeling is conducted and shows that these reactive minerals could mineralize 92% of injected and capillary‐trapped CO 2 within 1000 years of injection. Possible effects of heterogeneity on CO 2 injection and mineralization are also studied using the reactive transport code TOUGHREACT. Vertical heterogeneity of mineralogy and hydrology increases both CO 2 injectivity and mineralization. Available volcanogenic sandstones worldwide like the Etchegoin sandstone are summarized from the literature, with formations from the western USA that have CO 2 sequestration potential emphasized.© 2015 Society of Chemical Industry and John Wiley & Sons, Ltd

Zhang, Shuo↗

Spacecraft charging and ion wake formation in the near-Sun environment

A three-dimensional, self-consistent code is employed to solve for the static potential structure surrounding a spacecraft in a high photoelectron environment. The numerical solutions show that, under certain conditions, a spacecraft can take on a negative potential in spite of strong photoelectron currents. The negative potential is due to an electrostatic barrier near the surface of the spacecraft that can reflect a large fraction of the photoelectron flux back to the spacecraft. This electrostatic barrier forms if (1) the photoelectron density at the surface of the spacecraft greatly exceeds the ambient plasma density, (2) the spacecraft size is significantly larger than local Debye length of the photoelectrons, and (3) the thermal electron energy is much larger than the characteristic energy of the escaping photoelectrons. All of these conditions are present near the Sun. The numerical solutions also show that the spacecraft's negative potential can be amplified by an ion wake. The negative potential of the ion wake prevents secondary electrons from escaping the part of spacecraft in contact with the wake. These findings may be important for future spacecraft missions that go nearer to the Sun, such as Solar Orbiter and Solar Probe Plus.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Impurity behavior during sawtooth activity in tokamak plasmas

The transport of impurities by a sawtooth crash is simulated with the XTOR-2F code. Impurities are modeled as passive scalars, evolving in the compressible MHD flow inferred from the main MHD plasma. For a peaked impurity density profile, the non-linear kink flow of the sawtooth crash redistributes the profile efficiently and most of the particles in the peak inside the q = 1 surface are expelled. For an initially hollow impurity density profile, the crash leads to a significant penetration up to the magnetic axis. The results are compared with Kadomtsev's model. Despite essentially different mechanisms, the evolution of the particle content inside the q = 1 surface for Kadomtsev's model and for the non-linear case are virtually identical for the peaked profile, while the model slightly overestimates penetration for the hollow case.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear fluid simulation study of stimulated Raman and Brillouin scatterings in shock ignition

Here, we developed a new nonlinear fluid laser-plasma-instability code ( FLAME ) using a multi-fluid plasma model combined with full electromagnetic wave equations. The completed one-dimensional version of FLAME was used to study laser-plasma instabilities in shock ignition. The simulations results showed that absolute stimulated Raman scattering (SRS) modes growing near the quarter-critical surface were saturated by Langmuir-wave Decay Instabilities (LDI) and pump depletion. The ion-acoustic waves from LDI acted as seeds of Stimulated Brillouin Scattering, which displayed a bursting pattern and caused strong pump depletion. Re-scattering of SRS at the 1/16th-critical surface was also observed in a high temperature case. These results largely agreed with the corresponding Particle-in-Cell simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ly{alpha} RADIATIVE TRANSFER IN COSMOLOGICAL SIMULATIONS USING ADAPTIVE MESH REFINEMENT

A numerical code for solving various Ly{alpha} radiative transfer (RT) problems is presented. The code is suitable for an arbitrary, three-dimensional distribution of Ly{alpha} emissivity, gas temperature, density, and velocity field. Capable of handling Ly{alpha} RT in an adaptively refined grid-based structure, it enables detailed investigation of the effects of clumpiness of the interstellar (or intergalactic) medium. The code is tested against various geometrically and physically idealized configurations for which analytical solutions exist, and subsequently applied to three different simulated high-resolution 'Lyman-break galaxies', extracted from high-resolution cosmological simulations at redshift z = 3.6. Proper treatment of the Ly{alpha} scattering reveals a diversity of surface brightness (SB) and line profiles. Specifically, for a given galaxy the maximum observed SB can vary by an order of magnitude, and the total flux by a factor of 3-6, depending on the viewing angle. This may provide an explanation for differences in observed properties of high-redshift galaxies, and in particular a possible physical link between Lyman-break galaxies and regular Ly{alpha} emitters.

99 GENERAL AND MISCELLANEOUS↗

SU-F-T-79: Monte Carlo Investigation of Optimizing Parameters for Modulated Electron Arc Therapy

Purpose: Electron arc therapy provides excellent dose distributions for treating superficial tumors along curved surfaces. However this modality has not received widespread application due to the lack of needed advancement in electron beam delivery, accurate electron dose calculation and treatment plan optimization. The aim of the current work is to investigate possible parameters that can be optimized for electron arc (eARC) therapy. Methods: The MCBEAM code was used to generate phase space files for 6 and 12MeV electron beam energies from a Varian trilogy machine. An Electron Multi-leaf collimator eMLC of 2cm thickness positioned at 82 cm source collimated distance was used in the study. Dose distributions for electron arcs were calculated inside a cylindrical phantom using the MCSIM code. The Cylindrical phantom was constructed with 0.2cm voxels and a 15cm diameter. Electron arcs were delivered with two different approaches. The first approach was to deliver the arc as segments of very small field widths. In this approach we also tested the impact of the segment size and the arc increment angle. The second approach is to deliver the arc as a sum of large fields each covering the whole target as seen from the beam eye view. Results: In considering 90 % as the prescription isodose line, the first approach showed a region of buildup proceeding before the prescription zone. This build up is minimizing with the second approach neglecting need for bolus. The second approach also showed less x-ray contamination. In both approaches the variation of the segment size changed the size and location of the prescription isodose line. The optimization process for eARC could involve interplay between small and large segments to achieve desired coverage. Conclusion: An advanced modulation of eARCs will allow for tailored dose distribution for superficial curved target as with challenging scalp cases.

60 APPLIED LIFE SCIENCES↗

Neutrino-driven Winds in Three-dimensional Core-collapse Supernova Simulations

Abstract In this paper, we analyze the neutrino-driven winds that emerge in 12 unprecedentedly long-duration 3D core-collapse supernova simulations done using the code F ornax . The 12 models cover progenitors with zero-age main-sequence mass between 9 and 60 solar masses. In all our models, we see transonic outflows that are at least 2 times as fast as the surrounding ejecta and that originate generically from a proto−neutron star surface atmosphere that is turbulent and rotating. We find that winds are common features of 3D simulations, even if there is anisotropic early infall. We find that the basic dynamical properties of 3D winds behave qualitatively similarly to those inferred in the past using simpler 1D models, but that the shape of the emergent wind can be deformed, very aspherical, and channeled by its environment. The thermal properties of winds for less massive progenitors very approximately recapitulate the 1D stationary solutions, while for more massive progenitors they deviate significantly owing to aspherical accretion. The Y e temporal evolution in winds is stochastic, and there can be some neutron-rich phases. Though no strong r -process is seen in any model, a weak r -process can be produced, and isotopes up to 90 Zr are synthesized in some models. Finally, we find that there is at most a few percent of a solar mass in the integrated wind component, while the energy carried by the wind itself can be as much as 10%–20% of the total explosion energy.

79 ASTRONOMY AND ASTROPHYSICS↗

Advancing Mass Timber Buildings: Novel Methods Improve Thermal Assessment and Material Use

For nearly a century, thermal demand calculations for buildings have relied on simplified models developed to match the technical constraints of their era. The first standards, introduced in Germany and Austria in 1929, established climate zones and material conductivity coefficients that, with only incremental updates, still underpin many current assessments. Yet, methods such as Hot box testing, originally designed for lightweight insulation, continue to be applied for mass timber buildings, overlooking thermodynamic characteristics confer real-world advantages. Recent research at Oak Ridge National Laboratory incorporates updated methodologies, aligned with ASHRAE Standard 55 (ASHRAE, 2023) accounting for factors such as thermal inertia, inner surface temperatures, emissivity, solar gains, and dynamic outdoor conditions. These factors better reflect observed heating and cooling loads and highlight opportunities for efficient use of materials in mass timber construction. This work provides a framework for designing comfortable, resilient, and resource-efficient buildings while aligning with performance expectations in energy codes.

Pickett, Robert [International Mass Timber Allianc↗

Modeling of early stages of island growth during pulsed deposition: Role of closed compact islands

After a brief review of recent modeling of growth during Pulsed Laser Deposition (PLD), we present the study of a role of adatom interactions on growth of surface islands during PLD in submonolayer regime. We employ kinetic Monte Carlo simulation with reversible growth. Attachment of monomers to islands is irreversible at low temperatures while it becomes reversible at higher temperatures, small islands become unstable with growing temperature. In the case of real system we have to take into account not only diffusion of monomers but also diffusivity of dimers and larger clusters and theirs stability. Our new code allows us to study processes which proceed on different time scales which are typical in PLD experiments: fast deposition (on scale order of 10{sup -5} s) during individual pulses, and relaxation of a system between pulses (on scale order of 0.1 s). We calculate and compare the temperature dependence of island density for two modes pulsed deposition and continuous Molecular Beam Epitaxy (MBE) growth. The island densities in PLD mode are substantially higher than in MBE mode, provided the temperature is sufficiently high. In the case of PLD, we observe anomalous temperature dependence of the island density in a certain temperature interval. It is due to the interplay between a cluster decay time and an interval between pulses. The cluster decay time depends not only on temperature but also on clusters size and shape. The anomalous behavior is caused by the temperature limited stability of the closed--compact clusters. This scenario was revealed for the simplified model with only nearest-neighbor interaction. Now, it is elucidated further and we also include interaction to second and third neighbors. We analyze role of the closed-compact surface island in kinetics of both growth modes. Furthermore, by varying interactions energies, diffusion barrier and parameters of deposition, we compare results of simulations with the PLD experiment for Fe/Mo system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗