Search NASA⌕ Search

SEARCH · Search NASA

Results for “unit dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Compressor blade setting angle accuracy study, volume 1

The aerodynamic test of a small, single stage, highly loaded, axial flow transonic compressor is covered. The stage was modified by fabricating a 24 blade rotor with mis-set blades in a repeating pattern - two degrees closed from nominal, two degrees open from nominal and nominal. The unit was instrumented to determine overall performance and average blade element data. High-response, dynamic pressure probes were installed to record pressure patterns at selected points in the flowpath. Testing was conducted at speeds from 70 to 94% of design equivalent speed with a conventional casing and also with circumferential grooves over the rotor tip. Testing indicated severe performance penalties were incurred as a result of the mis-set blading. Lower flow, pressure ratio, and efficiency were observed for the stage with or without casing treatment. Periodic pressure variations were detected at every location where high response pressure sensors were located and were directly related to blading geometry.

Holman, F. F.↗

The Spacelab Experiment Interface Device (SEID)

The Spacelab experiment interface device (SEID) is described which simulates the electrical, and logical connections of the Spacelab remote acquisition unit (RAU), the interface functions of the Spacelab experiment computer software, and the electrical aspects of the high rate multiplexer. Simulated RAU interfaces include PCM serial channels (up to four), user time clock (UTC), flexible inputs (up to 128) and discrete outputs (up to 64). Connectors are logically compatible with the rau. be instructed to execute sequences of input/output commands to the RAU, similar to those performed during flight. This approximation of the experiment computer software is adequate to detect interface problems and prevent these from occurring during Spacelab payload integration. The SEID hardware is a microprocessor based system, utilizing an 8085 microprocessor with 6K of PROM and 4K of static RAM. The basic unit is augmented with an LSI-11 microcomputer to provide disk storage and a more dynamic environment for generation of control data. A simulation of the general monitoring loop is provided to emulate Spacelab system timing.

Kallus, R.↗

Some Eulerian and Lagrangian diagnostics for a model stratospheric warming

The Eliassen-Palm (EP) cross sections for the model are discussed. EP cross sections conveniently display the principal eddy fluxes of heat, momentum, and quasi-geostrophic potential vorticity on one diagram. The EP diagnostics are used to follow the evolution of the mean flow through into the second stage of the model warming, which includes the reversal of the polar westerlies and which appears to have more in common with observed warmings. The transformed Eulerian-mean equations presented by Andrews and McIntyre (1976, 1978) provide the basis for an investigation in which an especially clear picture of the warming dynamics is obtained. In the second stage of the model warming, the decelerating torque per unit mass is large throughout a deep layer in the middle atmosphere, spanning several scale heights.

Dunkerton, T.↗

Aeroelastic analysis for helicopter rotors with blade appended pendulum vibration absorbers. Mathematical derivations and program user's manual

Mathematical development is presented for the expanded capabilities of the United Technologies Research Center (UTRC) G400 Rotor Aeroelastic Analysis. This expanded analysis, G400PA, simulates the dynamics of teetered rotors, blade pendulum vibration absorbers and the higher harmonic excitations resulting from prescribed vibratory hub motions and higher harmonic blade pitch control. Formulations are also presented for calculating the rotor impedance matrix appropriate to these higher harmonic blade excitations. This impedance matrix and the associated vibratory hub loads are intended as the rotor blade characteristics elements for use in the Simplified Coupled Rotor/Fuselage Vibration Analysis (SIMVIB). Sections are included presenting updates to the development of the original G400 theory, and material appropriate to the user of the G400PA computer program. This material includes: (1) a general descriptionof the tructuring of the G400PA FORTRAN coding, (2) a detaild description of the required input data and other useful information for successfully running the program, and (3) a detailed description of the output results.

Bielawa, R. L.↗

The Active Magnetospheric Particle Tracer Explorers program

In order to study the access of solar wind ions to the magnetosphere, together with the processes that transport and accelerate magnetospheric particles, the Active Magnetospheric Particle Tracer Explorers (AMPTE) mission will release and monitor lithium and barium tracer ions in both the solar wind and the magnetosphere. A single, massive release of barium in the dawn magnetosheath will in addition create a visible artificial comet in the flowing solar wind plasma, within which studies of a range of different plasma effects will be undertaken. The AMPTE will obtain comprehensive measurements of natural magnetospheric particle populations' elemental composition and dynamics. AMPTE comprises three spacecraft: the Ion Release Module, the Charge Composition Explorer, and the United Kingdom Subsatellite.

Krimigis, S. M.↗

On the utility of threads for data parallel programming

Threads provide a useful programming model for asynchronous behavior because of their ability to encapsulate units of work that can then be scheduled for execution at runtime, based on the dynamic state of a system. Recently, the threaded model has been applied to the domain of data parallel scientific codes, and initial reports indicate that the threaded model can produce performance gains over non-threaded approaches, primarily through the use of overlapping useful computation with communication latency. However, overlapping computation with communication is possible without the benefit of threads if the communication system supports asynchronous primitives, and this comparison has not been made in previous papers. This paper provides a critical look at the utility of lightweight threads as applied to data parallel scientific programming.

Fahringer, Thomas↗

Yawed-Rolling Tire Mechanical Properties Testing of the Navy T-45 Aircraft Tires

The T-45 Goshawk is a United States Navy Jet aircraft used primarily as a trainer. The aircraft design makes use of "off the shelf" hardware as much as possible and was found to have unusual directional control issues during around operations. The aircraft was involved in numerous pilot-induced-oscillation incidents as well as observed to have unusual directional control reactions to failed main gear tires, a condition that is normally handled relatively easily by conventional aircraft steering control techniques. The behavior of the aircraft's tires had previously been modeled in simulators as a result of approximations provided in 40-year-old reference publications. Since knowledge of the true tire cornering and braking behavior is essential to modeling, understanding, and fixing directional control problems, the United States Navy requested assistance from the NASA Langley Research Center's (LARC) Aircraft Landing Dynamics Facility (ALDF) to define the yawed-rolling mechanical properties of the T-45 aircraft tires. The purpose of this report is to document the results of testing the subject tires at the NASA LaRC ALDF in September 1998. Brief descriptions of the Instrumented Tire Test Vehicle (ITTV) are included to familiarize the reader with the ITTV capabilities, data acquisition system, test and measurement techniques, data accuracy, and analysis and presentation of the testing results.

Daugherty, Robert H.↗

Computational Fluid Dynamics at NASA Ames Research Center

Computational fluid dynamics (CFD) is beginning to play a major role in the aircraft industry of the United States because of the realization that CFD can be a new and effective design tool and thus could provide a company with a competitive advantage. It is also playing a significant role in research institutions, both governmental and academic, as a tool for researching new fluid physics, as well as supplementing and complementing experimental testing. In this presentation, some of the progress made to date in CFD at NASA Ames will be reviewed. The presentation addresses the status of CFD in terms of methods, examples of CFD solutions, and computer technology. In addition, the role CFD will play in supporting the revolutionary goals set forth by the Aeronautical Policy Review Committee established by the Office of Science and Technology Policy is noted. The need for validated CFD tools is also briefly discussed.

Kutler, Paul↗

The Flow Visualization for the Separation of Air-water Bubbly Two-phase Flow Through a Vertical T-junction

T-junction is a typical structure in many industrial systems such as power plants, chemical process, and hydrocarbon production industries. The separation of two-phase flow passing through T-junction is a common flow phenomenon. There are lots of investigations regarding two-phase flow separation in branching tees and wyes tees. The characteristic of the two-phase flow between the two outlets are always non-uniform, and this kind of fluid status may contribute to the unpredictable damage of downstream facilities. For the nuclear power plants, severe accidents analysis is important especially for Light-Water Reactors (LWR) when Loss of Coolant Accident (LOCA) occurs. The small break of the pipe may cause the coolant become two-phase flow due to the pressure drop. Under certain conditions, the behavior of T-junction is similar to a gas-liquid separator, as a result of the gas enters the side arm and the liquid flows straight along the run arm. The partial separation of gas-liquid mixtures can reduce the load on the main separator, probably leading to smaller units. The study aims to establish complete visual observations for the benchmark of Computational Fluid Dynamics (CFD) model. As a consequence, a vertical T-junction (D = 26 mm) experimental loop was set up for the purpose of elaborating the complex two-phase fluid phenomena. In this experiment, variables were manipulated under highly controlled conditions and a photographic method was proposed to analyze the images of phase separation. Furthermore, the images obtained by camera have been discussed to receive valuable information about the two phase flow behavior around the T-junction.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Topological susceptibility with the asqtad action

Chiral perturbation theory predicts that in quantum chromodynamics (QCD), light dynamical quarks suppress the gauge-field topological susceptibility of the vacuum. The degree of suppression depends on quark multiplicity and masses. It provides a strong consistency test for fermion formulations in lattice QCD. Such tests are especially important for staggered fermion formulations that lack a full chiral symmetry and use the 'fourth-root' procedure to achieve the desired number of sea quarks. Over the past few years we have measured the topological susceptibility on a large database of 18 gauge field ensembles, generated in the presence of 2+1 flavors of dynamical asqtad quarks with up and down quark masses ranging from 0.05 to 1 in units of the strange quark mass and lattice spacings ranging from 0.045 fm to 0.12 fm. Our study also includes three quenched ensembles with lattice spacings ranging from 0.06 to 0.12 fm. We construct the topological susceptibility from the integrated point-to-point correlator of the discretized topological charge density F{tilde F}. To reduce its variance, we model the asymptotic tail of the correlator. The continuum extrapolation of our results for the topological susceptibility agrees nicely at small quark mass with the predictions of lowest-order SU(3) chiral perturbation theory, thus lending support to the validity of the fourth-root procedure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Utilization of an Advanced Sensor network to determine fuel heating value and Real-Time net unit heat rate during transient operation

Coal-fired utility boilers are being increasingly used as variable electricity generation to resolve the imbalance in the energy market from the expansion of intermittent renewable energy. The frequent transient operation required to meet residual energy demand has created a challenge for coal-fired units to operate efficiently. This work utilizes an advanced sensor network (ASN) to calculate net unit heat rate (NUHR) of a coal-fired boiler in real time through combustion calculations and statistical correlations to provide the tools for optimizing dynamic operation. Real-time heating values that were necessary to determine fuel input energy to calculate accurate NUHR were found using both fundamental and data-driven methods. Real-time NUHR shows distinct shifts that reflect changes in process conditions that will improve the ability to optimize transient operation. Data-driven heating value correlations had 24% lower root mean square error (RMSE) than the fundamental combustion calculation approach when compared to daily retrospective proximate analysis. Furthermore, the data-driven method RMSE improved by 7% with the inclusion of ASN data. Future work is to validate by comparing unit performance with and without the inclusion of NUHR as a control parameter for the dynamic neural network.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Understanding the Influence of Chain Architecture on the Transport Quantities of Polymer Electrolytes with Covalently Bonded Anions

Here, we use a combination of experiments and coarse-grained molecular dynamics simulations to elucidate the structure–property relationships in polymer electrolytes obtained by the copolymerization of poly(vinyl ethylene carbonate─lithium styrene bis(trifluoromethanesulfonyl)imide) or p(VEC-LiSTFSI). Experiments show that the conductivity reduces with increasing anion (i.e., STFSI) fraction on the chain, and the cation transference number (t + ) is found to be dependent on the anion fraction. Furthermore, a significant fraction of unpolymerized VEC monomers are observed. Since it is inherently difficult to experimentally control the chain architecture and the amount of unpolymerized VEC in these systems, we perform coarse-grained molecular dynamics simulations on model polymer systems with different chain architectures to mimic the plausible experimental systems. Specifically, we look at the differences in transference numbers arising from (i) a random copolymer of VEC and STFSI monomers; (ii) a blend of VEC-STFSI copolymer with VEC monomers; and (iii) a ternary blend of the VEC homopolymer, STFSI homopolymers, and VEC monomers. The ternary blend model demonstrates the closest resemblance with the experimental transference numbers and diffusivities. The lithium diffusivity obtained from the coarse-grained models with VEC monomers (plasticizers) is about 1.5 times that of the model without VEC monomers, showing that the plasticizing effect of VEC monomers is modest. We rationalize the experimental observations based on aggregate and cluster analyses obtained from molecular simulations. This work reveals that polymer electrolyte chain architecture and plasticizers can critically influence the transport properties, and these parameters should be considered when designing single ion conducting polymeric electrolytes.

cluster distribution↗

Nodal hybridization in a two-dimensional heavy-fermion material

Metals with partially filled core atomic shells can form quasiparticles at a low temperature arising from the hybridization of the core level and conduction electrons. The thermodynamic and spectroscopic properties of these metals can be understood as those of a simple metal, but with a significant mass enhancement over the free electron mass—commonly referred to as heavy fermions. In most heavy-fermion materials, the hybridization is approximately isotropic in position and momentum space. However, a combination of low dimensionality and symmetry properties of the core-level wavefunctions can give rise to highly anisotropic electronic interactions with the conduction electrons. Here, in this study, we demonstrate anisotropic hybridization that vanishes along specific directions in momentum space—referred to as nodes—in a lanthanide-based two-dimensional van der Waals heavy-fermion compound, CeSiI. Quasiparticle interference measurements reveal a set of discrete hotspots with high spectral intensity on the Fermi surface. Theoretical modelling and comparison with the quasiparticle interference pattern of the non-heavy-fermion isostructural analogue LaSiI suggest that these features arise from an unconventional electron interaction involving hybridization nodes unique to CeSiI. As a result, the effective mass of the quasiparticles varies by orders of magnitude depending on their direction in momentum space.

36 MATERIALS SCIENCE↗

Dynamic mode decomposition for gyrokinetic eigenmode analysis

Dynamic mode decomposition (DMD) is a post-processing approach to decompose a complex time series into a set of modes via spectral analysis. DMD provides a new and powerful method to recover gyrokinetic drift-wave eigenfrequencies and eigenfunctions based only on the solution of the gyrokinetic-Maxwell initial value problem with almost no added cost to the initial value solver. In the present paper, DMD is applied to the CGYRO gyrokinetic code using a newly-developed CGYRO-DMD post-processor. CGYRO-DMD is numerically efficient, even on a single CPU. It does not set any restrictions on the plasma shape, beta (ratio of the plasma pressure to the magnetic field pressure), collisionality or number of species, and allows one to resolve numerous eigenmodes, even of comparable growth rates. In addition, DMD is not limited to unstable modes, but rather can capture stable and unstable branches simultaneously. In this work, we illustrate the accuracy of DMD through gyrokinetic analysis of mode transition for electromagnetic drift wave instabilities.

drift-wave eigenmodes↗

Real-time computer data system for the 40- by 80-foot wind tunnel facility at Ames Research Center

The background material and operational concepts of a computer-based system for an operating wind tunnel are described. An on-line real-time computer system was installed in a wind tunnel facility to gather static and dynamic data. The computer system monitored aerodynamic forces and moments of periodic and quasi-periodic functions, and displayed and plotted computed results in real time. The total system is comprised of several off-the-shelf, interconnected subsystems that are linked to a large data processing center. The system includes a central processor unit with 32,000 24-bit words of core memory, a number of standard peripherals, and several special processors; namely, a dynamic analysis subsystem, a 256-channel PCM-data subsystem and ground station, a 60-channel high-speed data acquisition subsystem, a communication link, and static force and pressure subsystems. The role of the test engineer as a vital link in the system is also described.

Cambra, J. M.↗

Design, development, fabrication and delivery of register and multiplexer units

Several approaches for implementing the register and multiplexer unit into two CMOS monolithic chip types were evaluated. The CMOS standard cell array technique was selected and implemented. Using this design automation technology, two LSI CMOS arrays were designed, fabricated, packaged, and tested for proper static, functional, and dynamic operation. One of the chip types, multiplexer register type 1, is fabricated on a 0.143 x 0.123 inch chip. It uses nine standard cell types for a total of 54 standard cells. This involves more than 350 transistors and has the functional equivalent of 111 gates. The second chip, multiplexer register type 2, is housed on a 0.12 x 0.12 inch die. It uses 13 standard cell types, for a total of 42 standard cells. It contains more than 300 transistors, the functional equivalent of 112 gates. All of the hermetically sealed units were initially screened for proper functional operation. The static leakage and the dynamic leakage were measured. Dynamic measurements were made and recorded. At 10 V, 14 megabit shifting rates were measured on multiplexer register type 1. At 5 V these units shifted data at a 6.6 MHz rate. The units were designed to operate over the 3 to 15 V operating range and over a temperature range of -55 to 125 C.

Feller, A.↗

Observational evidence for groundwater influence on crop yields in the United States

As climate change shifts crop exposure to dry and wet extremes, a better understanding of factors governing crop response is needed. Recent studies identified shallow groundwater—groundwater within or near the crop rooting zone—as influential, yet existing evidence is largely based on theoretical crop model simulations, indirect or static groundwater data, or small-scale field studies. Here, we use observational satellite yield data and dynamic water table simulations from 1999 to 2018 to provide field-scale evidence for shallow groundwater effects on maize yields across the United States Corn Belt. We identify three lines of evidence supporting groundwater influence: 1) crop model simulations better match observed yields after improvements in groundwater representation; 2) machine learning analysis of observed yields and modeled groundwater levels reveals a subsidy zone between 1.1 and 2.5 m depths, with yield penalties at shallower depths and no effect at deeper depths; and 3) locations with groundwater typically in the subsidy zone display higher yield stability across time. We estimate an average 3.4% yield increase when groundwater levels are at optimum depth, and this effect roughly doubles in dry conditions. Groundwater yield subsidies occur ~35% of years on average across locations, with 75% of the region benefitting in at least 10% of years. Overall, we estimate that groundwater-yield interactions had a net monetary contribution of approximately $10 billion from 1999 to 2018. This study provides empirical evidence for region-wide groundwater yield impacts and further underlines the need for better quantification of groundwater levels and their dynamic responses to short- and long-term weather conditions.

60 APPLIED LIFE SCIENCES↗