Search NASA⌕ Search

SEARCH · Search NASA

Results for “wind engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Integration of aft-fuselage-mounted flow through engine nacelles on an advanced transport configuration at Mach numbers from 0.6 to 1.0

An approximately 1/30th-scale model of a CTOL aircraft designed for efficient cruise between Mach 0.9 and 0.98 was tested in the Lewis Research Center's 8- by 6-Foot Supersonic Wind Tunnel. Aft-fuselage axial force and pressure were measured for a series of locally area-ruled engine installations. Two flow-through nacelles with different exit diameters which simulated inlet mass flow ratios of 0.46 and 0.6 (based on maximum nacelle cross-sectional) area were investigated. Both an NACA-1 cowl and a blunter supercritical cowl were tested with these nacelles. Variations in the amount of local area ruling were investigated and an aft fuselage without nacelles was tested for reference. Results observed with flow-through nacelles indicate that efficient cruise may be obtained on this type of aircraft with aft-fuselage-mounted engine nacelles.

Blaha, B. J.↗

Outer Planet Global Reference Atmospheric Model (GRAM) Upgrades

Introduction: The Global Reference Atmospheric Model (GRAM) is one of the most widely used engineering models of planetary atmospheres. The GRAM upgrades are being developed by NASA Marshall Space Flight Center and NASA Langley Research Center. This presentation will provide details regarding the upgrades to the existing GRAMs, the development of new GRAMs, and the ongoing objectives, tasks, and milestones related to the GRAM upgrades funded by the NASA Science Mission Directorate (SMD). GRAM: The GRAMs are engineering-oriented atmospheric models that estimate mean values and statistical variations of the atmospheric properties for numerous planetary destinations. They provide mean values and variability for any point in the atmosphere as well as seasonal, geographic, and altitude variations. GRAM outputs include atmospheric density, temperature, pressure, winds, and chemical composition along a user-defined path. They are extensively used by the engineering community because of their ability to create realistic dispersions. GRAMs have been integrated into high fidelity flight dynamic simulations of launch, entry, descent and landing (EDL), aerobraking and aerocapture. GRAMs are currently available for Earth, Mars, Venus, Neptune, Titan, and Uranus. Outer Planet GRAM Upgrade Status: Code Modernization. The outer planet GRAMs have been rearchitected from Fortran to a common object-oriented C++ framework called the GRAM Suite. This new architecture creates a common GRAM library of data models and utilities. The first C++ releases of the rearchitected legacy outer planet GRAMs (Neptune and Titan-GRAM) are straight conversions from the latest Fortran version. Model Upgrades. The focus of the model upgrade task is to improve the atmosphere models in the existing GRAMs and to establish a foundation for developing GRAMs for additional destinations. The GRAM ephemeris has been upgraded to the NASA Navigation and Ancillary Information Facility (NAIF) SPICE toolkit (version N0066). The calculation of the speed of sound has also been improved in the GRAMs. In FY20, the GRAM project established a contract with Hampton University to develop empirical global models for Jupiter, Saturn, Uranus, Neptune, and Titan. Upgraded Outer Planet GRAM Releases. GRAM Suite Version 1.0 was released in May 2020 and contains the rearchitected Neptune-GRAM, including the common GRAM framework and planet–specific code. GRAM Suite Version 1.1 was released in September 2020 and added the rearchitected Titan-GRAM to the GRAM Suite. A User Guide and Programmer’s Manual are released with all GRAMs. New Outer Planet GRAM Releases. New GRAMs have been developed for Uranus and Jupiter. Uranus-GRAM is based on the NASA Ames Research Center (ARC) Uranus Atmospheric Model [1,2] and was released in GRAM Suite Version 1.2 in July 2021. Jupiter-GRAM is based on Galileo probe Atmospheric Structure Instrument (ASI) data from Seiff et al. [3] Saturn-GRAM is also under development. Both Jupiter and Saturn-GRAM will be released in future versions of the GRAM Suite. Conclusions: GRAMs are vital and frequently used toolsets. Releases of the GRAM Suite, upgrades of the existing planetary GRAMs, and development of new planetary GRAMs are ongoing. Titan-GRAM atmosphere model upgrades will be included in the next phase of GRAM tasks. References: [1] Allen Jr., G.A. et al. (2014) 11th International Planetary Probe Workshop, Abstract #8023. [2] Allen Jr., G.A. et al. (2014) Workshop on the Study of the Ice Giant Planets, Abstract #2001. [3] Seiff, A. et al. (1998) JGR, 103, 22,857 -22,889. Acknowledgments: The authors gratefully acknowledge support from the NASA SMD.

atmospheric models↗

High-Speed Tests of Conventional Radial-Engine Cowlings

The drag characteristics of eight radial-engine cowlings have been determined over a wide speed range in the NACA 8-foot high-speed wind tunnel. The pressure distribution over all cowlings was measured, to and above the speed of the compressibility burble, as an aid in interpreting the force tests. One-fifth-scale models of radial-engine cowlings on a wing-nacelle combination were used in the tests.

Robinson, Russell G↗

High-Speed Tests of Radial-Engine Cowlings

The drag characteristics of eight radial-engine cowlings have been determined over a wide speed range in the N.A.C.A. 8-foot high-speed wind tunnel. The pressure distribution over all cowlings was measured, to and above the speed of the compressibility burble, as an aid in interpreting the force tests. One-fifth-scale models of radial-engine cowlings on a wing-nacelle combination mere used in the tests.

Robinson, Russell G.↗

Experimental and analytical evaluation of the effects of simulated engine inlets on the blade vibratory stresses of the SR-3 model prop-fan

A cooperative wind tunnel test program, referred to as GUN-3, had been conducted previously to assess the effect of inlet configuration and location on the inlet face pressure recovery and inlet drag in the presence of a high-speed advanced turboprop. These tests were conducted with the inlets located just downstream of the SR-3 model Prop-Fan, a moderately swept, eight-bladed 62.2 cm (24.5 inch) diameter advanced, high-speed turboprop model fabricated from titanium. During these tests, two blades of the SR-3 model Prop-Fan were strain gaged to measure the vibratory blade stresses occurring during the inlet aerodynamic test program. The purpose of the effort reported herein was to reduce and analyze the test results related to the vibratory strain gage measurements obtained. Three inlet configurations had been tested. These were: (1) single scoop, (2) twin scoop, and (3) annular. Each of the three inlets was tested at a position just behind the rotor. The single scoop inlet was also tested at a position further aft. Tests were also done without an inlet. These results emphasize the importance of avoiding critical speeds in the continuous operating range.

Bansal, Prem N.↗

Recent Activities of the Marshall Space Flight Center Natural Environments Branch Terrestrial & Planetary Environments Team

- The Natural Environments (NE) Branch is within the MSFC Engineering Directorate’s Spacecraft and Vehicle System (S&VS) Department - S&VS plans, performs and directs the technical Design, Analysis, Test, Evaluation, Verification, Integration, and Applied Research and Development of future Spacecraft and Launch Vehicle Systems - Current programs we support - Space Launch System, Human Landing System, Mars Ascent Vehicle, Orion, Gateway - NE maintains expertise in terrestrial, space, and planetary natural environments definition, characterization, and analysis - Responsibility to disseminate this expertise to Agency programs and projects in support of environment definition, requirements development, vehicle development, operations, and sustaining engineering through program’s life cycle - Branch has two teams; Terrestrial and Planetary Environments (T&PE) and Space Environments (SE) - T&PE has extensive expertise characterizing terrestrial surface and atmospheric (aloft) environments - Winds, temperature, humidity, pressure, lightning, density, precipitation, radiant energy, aerosols, sea state, sea surface temperature - Maintains climatological databases for engineering analyses

Ryan K. Decker↗

Venus Global Reference Atmospheric Model (Venus-GRAM) Upgrades

Introduction: The Venus Global Reference Atmospheric Model (Venus-GRAM) is one of the most widely used engineering models of Venus’ atmosphere. The Venus-GRAM upgrades are being developed by NASA Marshall Space Flight Center (MSFC) and NASA Langley Research Center (LaRC). This presentation will provide details regarding the upgrades that have been made to Venus-GRAM and the ongoing objectives, tasks, and milestones related to the GRAM upgrades funded by the NASA Science Mission Directorate (SMD). Venus-GRAM: Venus-GRAM is an engineering-oriented atmospheric model that estimates mean values and statistical variations of the atmospheric properties of Venus. Venus-GRAM provides mean values and variability for any point in the atmosphere as well as seasonal, geographic, and altitude variations. Venus-GRAM outputs include atmospheric density, temperature, pressure, winds, and chemical composition along a user-defined path. It is extensively used by the engineering community because of its ability to create realistic dispersions. GRAMs have been integrated into high fidelity flight dynamic simulations of launch, entry, descent and landing (EDL), aerobraking and aerocapture. GRAMs are currently available for Earth, Mars, Venus, Neptune, Titan, and Uranus. The lower atmosphere model in Venus-GRAM (up to 250 km) is based on the Venus International Reference Atmosphere (VIRA) [1]. The Venus-GRAM thermosphere (250 to 1000 km) is based on a MSFC-developed model [2] which assumes an isothermal temperature profile initialized using VIRA conditions at 250 km [3]. The VIRA version included in Venus-GRAM includes Pioneer Venus Orbiter and Probe data as well as Venera probe data, but it does not include a solid planet model or a high-resolution gravity model [4]. Venus-GRAM Upgrade Status: Code Modernization. Venus-GRAM has been rearchitected from Fortran to a common object-oriented C++ framework called the GRAM Suite. This new architecture creates a common GRAM library of data models and utilities. The first C++ release of the rearchitected Venus-GRAM is a straight conversion from the latest Fortran version. Model Upgrades. The focus of the model upgrade task is to improve the atmosphere models in the existing GRAMs and to establish a foundation for developing GRAMs for additional destinations. The GRAM ephemeris has been upgraded to the NASA Navigation and Ancillary Information Facility (NAIF) SPICE toolkit (version N0066). The calculation of the speed of sound has also been improved in the GRAMs. In FY20, the GRAM project established contracts to improve the model data within Venus-GRAM. Hampton University is developing an empirical global model for Venus. The University of Wisconsin is reanalyzing the Venus Express radio occultation observations and analyzing the Akatsuki thermal imaging data. Upgraded Venus-GRAM Release. GRAM Suite Version 1.3 will be released in September 2021 and will contain the rearchitected Venus-GRAM, including the common GRAM framework and planet–specific code. A User Guide and Programmer’s Manual are released with all GRAMs. Conclusions: GRAMs are frequently used toolsets and vital in assessing effects of atmospheres on interplanetary spacecraft during the program life cycle process. Releases of the GRAM Suite, upgrades of the existing planetary GRAMs, and development of new planetary GRAMs are ongoing. Venus-GRAM atmosphere model upgrades will be included in the next phase of GRAM tasks. References: [1] Kliore, A. J. et al. (1985) ASR, 5, 11, 1-304. [2] Justh, H. L. et al. (2006) AIAA/AAS Astrodynamics Specialist Conference & Exhibit, Abstract AIAA-2006-6394. [3] Guide to Reference and Standard Atmosphere Models, BSR/AIAA G-003-2010. [4] Limaye, S. S. (2012), LPSC VEXAG Townhall Meeting. Acknowledgments: The authors gratefully acknowledge support from the NASA SMD.

atmospheric models↗

Additive manufacturing of sandwich panels with continuous fiber reinforced high modulus composite facings

Abstract An improved approach consisting of a combination of fiber placement and fused filament fabrication is introduced for the additive manufacture (AM) of structural grade sandwich beams. Here, sandwich beams are additively manufactured using in‐situ deposition and consolidation of continuous fiber unidirectional facings made from a commingled yarn system of e‐glass fiber (~50% vol.) and amorphous PET, and a hexagonal honeycomb core structure made from PETG. Both facings and the sandwich core are manufactured on a single machine, in one sequence (skin‐core‐skin), employing the benefit of matrix compatibility to create autohesion at the interfaces. Flexural and transverse shear rigidity are determined experimentally and compared with analytical predictions and show correlation to within 3%. Flexural strength and core shear strength are also measured. Post‐mortem examinations show that core fracture and core facing debond were the dominant failure mode in flexure. Single cantilever beam tests were performed to evaluate core facing debond toughness. Subsequently, surface preheat using infrared heaters was utilized to increase autohesion between core and facing. The results show debond toughness was increased 4 times using infrared heating. This research effort presents a manufacturing approach that has the potential for the AM of stiff, well bonded, structural grade sandwich beams, in an integrated sequence, employing in‐situ consolidation to the facings, without the need for the use of intermediate adhesives for skin‐to‐core bonding. Highlights An improved additive manufacturing technique for making sandwich panels is developed. Sandwich panel facings have fiber volume fractions of approximately 50%. Surface preheat improves core‐to‐facing debond toughness by a factor of 4. Top and bottom facings are consolidated during manufacture leading to better properties. Experimental results are compared to analytical predictions and show good correlation.

17 WIND ENERGY↗

Measurement of the temperature of a stator winding with fiber-optic sensors in bench tests of a turbogenerator

The temperature of the elementary conductors of the stator winding of a 225 MW turbogenerator has been measured using miniature fiber-optic sensors, built in to the winding during manufacture. This is the first time that practical bench tests have been made in Russian electrical machine construction practice. The results of the experiment are used as the initial data for determining important parameters of the construction of turbogenerators with air cooling, namely, the thermal conductivity of the body insulation in the slot, and the heat-transfer coefficient in the front parts of the stator winding.

42 ENGINEERING↗

Wind blade joints based on non-crimp 3D orthogonal woven Pi shaped preforms

Current industrial designs for joining composite windblade elements allow unstable crack propagation in the thick adhesive layer within the joint. In this work, a novel integral 3D woven Pi-joint element is developed and implemented in an I-beam joint construction that corresponds to a windblade shear web and spar cap. In a series of iterative design-analysis-fabrication-testing cycles, 2.9 m long I-beams that used the current practice joint and the novel proposed joint were designed, studied theoretically with the use of a 3D Mosaic analysis tool, then manufactured and loaded to failure in a cantilever flexure loading set up. Experimental data showed significant advantage in the load-bearing capacity of the joint structure with the use of novel Pi-joint element. Excellent agreement was observed between the theoretical predictions and experimental data.

17 WIND ENERGY↗

Metal-Insulation REBCO Pancake Coil With Solder Surface Shunt: Testing and Modeling

Rare-earth barium copper oxide (REBCO) high-temperature superconducting (HTS) magnets can generate very high magnetic fields with superior engineering current density and robust mechanical integrity. The no-insulation (NI) winding technique, including its metal-insulation (MI) variant, enables “self-protection” against localized overheating through inter-turn current sharing, improving defect tolerance and allowing temporary current overloads. In REBCO pancake coils, the current-sharing path is predominantly confined to the edges of the REBCO tapes due to insulating buffer layers. Applying a surface shunt using solder can effectively enhance current sharing in NI/MI coils via the REBCO tape edges. Here, in this paper, we present both experimental and numerical research on the current distribution in surface-shunt metal-insulation (SSMI) REBCO pancake coils. We tested a stainless steel co-wound MI REBCO double-pancake coil, before and after applying a soldered surface shunt, in a saturated liquid nitrogen bath. The SSMI coil was modeled using the H-formulation and rotated anisotropic resistivity to study its dynamic behavior, including inter-turn current sharing and intra-turn screening currents. Benchmarked by experimental data, the numerical model is able to study the defect tolerance of the SSMI coil during energization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DeepCwind Consortium Research Program: January 15, 2010 - March 31, 2013 (Final Technical Report)

This is the final technical report for the U.S. Department of Energy-funded program, DE-0002981: DeepCwind Consortium Research Program. The project objective was the partial validation of coupled models and optimization of materials for offshore wind structures. The United States has a great opportunity to harness an indigenous abundant renewable energy resource: offshore wind. In 2010, the National Renewable Energy Laboratory (NREL) estimated there to be over 4,000 GW of potential offshore wind energy found within 50 nautical miles of the US coastlines (Musial and Ram, 2010). The US Energy Information Administration reported the total annual US electric energy generation in 2010 was 4,120 billion kilowatt-hours (equivalent to 470 GW) (US EIA, 2011), slightly more than 10% of the potential offshore wind resource. In addition, deep water offshore wind is the dominant US ocean energy resource available comprising 75% of the total assessed ocean energy resource as compared to wave and tidal resources (Musial, 2008). Through these assessments it is clear offshore wind can be a major contributor to US energy supplies. The caveat to capturing offshore wind along many parts of the US coast is deep water. Nearly 60%, or 2,450 GW, of the estimated US offshore wind resource is located in water depths of 60 m or more (Musial and Ram, 2010). At water depths over 60 m building fixed offshore wind turbine foundations, such as those found in Europe, is likely economically infeasible (Musial et al., 2006). Therefore floating wind turbine technology is seen as the best option for extracting a majority of the US offshore wind energy resource. Volume 1 - Test Site; Volume 2 - Coupled Models; and Volume 3 - Composite Materials.

17 WIND ENERGY↗

Crowder College MARET Center (Final Scientific Technical Report)

Following decades of success in solar energy projects, the Missouri Legislature designated Crowder College in 1992 as the State's renewable energy education center. The resulting Missouri Alternative and Renewable Energy Technology (MARET) Center is recognized internationally for its contributions to the energy field. The mission of the MARET Center is to expand renewable energy throughout the region with education, applied research, and economic development. Educational programs include certification and transfer degrees encompassing green construction, solar thermal energy, solar electricity, and wind. The MARET Center also assists in new product development and other business support services in renewable energy. The Missouri Alternative and Renewable Energy Technology (MARET) Center at Crowder College hopes to eventually develop a 27,500 ft 2 facility as a living laboratory to support solar and other renewable and sustainable energy development through professional degrees, new product development and commercialization, renewable energy business incubation, and consumer education. The primary objective of the current project was to complete Stage One of this building, with solar, wind, and geothermal technologies installed to power its 9,216 ft 2 office, classroom, and research spaces. This MARET Center includes a modular roof structure that permits both solar module mounting and daylighting, PV/thermal hybrid modules pioneered in Crowder Solar Decathlon homes, modular electrical management subsystems; and modular delivery systems for heating and cooling the structure. The MARET Facility will operate as a Net Positive energy building, consistently producing surplus energy for distributed generation on the utility grid. The modular design of the energy systems within the building is to serve as a scalable and repeatable model for a wide variety of building applications and climate zones. As a living laboratory of renewable energy, exploring and validating new applications of solar and other renewable technologies, the MARET Facility will house a wide variety of programs which will advance implementation of renewable energy throughout the region. These program goals include; Curriculum in renewable energy for pre-engineering transfer programs; Certification and degree programs for technical degrees for Energy Efficiency, Wind, Photovoltaic and Solar Thermal professionals; Short courses and workshops for building management and design professionals; Public education and demonstration projects in renewable energy through conferences and K-12 educational outreach; Technical degree offering in building construction incorporating “best practices” for energy efficiency and renewables; and Business incubators for new renewable energy businesses and new product development. The new MARET facility will support the mission of the US Department of Energy (DOE) Solar Program, “to improve America’s security, environmental quality, and economic prosperity through public-private partnerships that bring reliable and affordable solar energy technologies to the marketplace,” through a variety of educational and business assistance programs. Further, technical innovations planned for the MARET facility and its applied research activities will advance the Solar Program strategic goals to “reduce the cost of solar energy to the point it becomes competitive in relevant energy markets (e.g., buildings, power plants) and for solar technology to enable a sustainable solar industry.” Overarching Goals relative to program needs, future expansion, flexibility, quality of materials, and construction and operational costs:; Experimental: The structure and systems of the building operate as an educational resource. The systems are meant to be a source for data collection and study for building users and instructors; Educational: Part of the evolution of this building and its ongoing goals is to use the building as an educational tool, one where new ideas developed in the world and especially at Crowder can be tested further as part of MARET's curriculum; LEED Platinum: achieve highest level of LEED certification; Net Zero: The building will utilize existing wind and alternate energy sources on campus and add solar PVT panels and achieve as close as possible to a net zero energy usage; and Phase II: The phase II portion of this project will expand the Internet student area, additional classrooms, and labs, as well as an auditorium and exhibit area.

14 SOLAR ENERGY↗