Search NASA⌕ Search

SEARCH · Search NASA

Results for “Analytical Method Development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Analytical comparisons of handheld LIBS and XRF devices for rapid quantification of gallium in a plutonium surrogate matrix

This work compares a portable laser-induced breakdown spectroscopy (LIBS) analyzer to a portable X-ray fluorescence (XRF) device for quantification of gallium (Ga) in a plutonium surrogate matrix of cerium (Ce) for the first time. Calibration methods are developed with spectra of Ce–Ga samples from both devices. Here, metrics such as limit of detection (LoD) and mean average percent error (MAPE) are examined to evaluate calibration performance. While the portable LIBS device can yield a nearly instantaneous analytical measurement, its accuracy is hampered by self-absorption. By employing a self-absorption correction and increasing gating delay, LIBS calibrations with errors in the low single percents and LoDs of 0.1% Ga were constructed. The XRF device produces calibrations with superlative sensitivity, yielding LoDs for gallium in the low tens of parts-per-million (ppm), two orders of magnitude lower than the corrected LIBS models. However, a clear trade-off of measurement fidelity is established between the instantaneous analysis of the LIBS device and the minutes-long XRF measurement yielding superior detection limits.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computational predictive methods for fracture and fatigue

The damage-tolerant design philosophy as used by aircraft industries enables aircraft components and aircraft structures to operate safely with minor damage, small cracks, and flaws. Maintenance and inspection procedures insure that damages developed during service remain below design values. When damage is found, repairs or design modifications are implemented and flight is resumed. Design and redesign guidelines, such as military specifications MIL-A-83444, have successfully reduced the incidence of damage and cracks. However, fatigue cracks continue to appear in aircraft well before the design life has expired. The F16 airplane, for instance, developed small cracks in the engine mount, wing support, bulk heads, the fuselage upper skin, the fuel shelf joints, and along the upper wings. Some cracks were found after 600 hours of the 8000 hour design service life and design modifications were required. Tests on the F16 plane showed that the design loading conditions were close to the predicted loading conditions. Improvements to analytic methods for predicting fatigue crack growth adjacent to holes, when multiple damage sites are present, and in corrosive environments would result in more cost-effective designs, fewer repairs, and fewer redesigns. The overall objective of the research described in this paper is to develop, verify, and extend the computational efficiency of analysis procedures necessary for damage tolerant design. This paper describes an elastic/plastic fracture method and an associated fatigue analysis method for damage tolerant design. Both methods are unique in that material parameters such as fracture toughness, R-curve data, and fatigue constants are not required. The methods are implemented with a general-purpose finite element package. Several proof-of-concept examples are given. With further development, the methods could be extended for analysis of multi-site damage, creep-fatigue, and corrosion fatigue problems.

Cordes, J.↗

Software safety - A user's practical perspective

Software safety assurance philosophy and practices at the NASA Ames are discussed. It is shown that, to be safe, software must be error-free. Software developments on two digital flight control systems and two ground facility systems are examined, including the overall system and software organization and function, the software-safety issues, and their resolution. The effectiveness of safety assurance methods is discussed, including conventional life-cycle practices, verification and validation testing, software safety analysis, and formal design methods. It is concluded (1) that a practical software safety technology does not yet exist, (2) that it is unlikely that a set of general-purpose analytical techniques can be developed for proving that software is safe, and (3) that successful software safety-assurance practices will have to take into account the detailed design processes employed and show that the software will execute correctly under all possible conditions.

Dunn, William R.↗

Grassmann phase space theory and the Jaynes–Cummings model

The Jaynes–Cummings model of a two-level atom in a single mode cavity is of fundamental importance both in quantum optics and in quantum physics generally, involving the interaction of two simple quantum systems—one fermionic system (the TLA), the other bosonic (the cavity mode). Depending on the initial conditions a variety of interesting effects occur, ranging from ongoing oscillations of the atomic population difference at the Rabi frequency when the atom is excited and the cavity is in an n-photon Fock state, to collapses and revivals of these oscillations starting with the atom unexcited and the cavity mode in a coherent state. The observation of revivals for Rydberg atoms in a high-Q microwave cavity is key experimental evidence for quantisation of the EM field. Theoretical treatments of the Jaynes–Cummings model based on expanding the state vector in terms of products of atomic and n-photon states and deriving coupled equations for the amplitudes are a well-known and simple method for determining the effects. In quantum optics however, the behaviour of the bosonic quantum EM field is often treated using phase space methods, where the bosonic mode annihilation and creation operators are represented by c-number phase space variables, with the density operator represented by a distribution function of these variables. Fokker–Planck equations for the distribution function are obtained, and either used directly to determine quantities of experimental interest or used to develop c-number Langevin equations for stochastic versions of the phase space variables from which experimental quantities are obtained as stochastic averages. Phase space methods have also been developed to include atomic systems, with the atomic spin operators being represented by c-number phase space variables, and distribution functions involving these variables and those for any bosonic modes being shown to satisfy Fokker–Planck equations from which c-number Langevin equations are often developed. However, atomic spin operators satisfy the standard angular momentum commutation rules rather than the commutation rules for bosonic annihilation and creation operators, and are in fact second order combinations of fermionic annihilation and creation operators. Though phase space methods in which the fermionic operators are represented directly by c-number phase space variables have not been successful, the anti-commutation rules for these operators suggest the possibility of using Grassmann variables—which have similar anti-commutation properties. However, in spite of the seminal work by Cahill and Glauber and a few applications, the use of phase space methods in quantum optics to treat fermionic systems by representing fermionic annihilation and creation operators directly by Grassmann phase space variables is rather rare. This paper shows that phase space methods using a positive P type distribution function involving both c-number variables (for the cavity mode) and Grassmann variables (for the TLA) can be used to treat the Jaynes–Cummings model. Although it is a Grassmann function, the distribution function is equivalent to six c-number functions of the two bosonic variables. Experimental quantities are given as bosonic phase space integrals involving the six functions. A Fokker–Planck equation involving both left and right Grassmann differentiations can be obtained for the distribution function, and is equivalent to six coupled equations for the six c-number functions. The approach used involves choosing the canonical form of the (non-unique) positive P distribution function, in which the correspondence rules for the bosonic operators are non-standard and hence the Fokker–Planck equation is also unusual. Initial conditions, such as those above for initially uncorrelated states, are discussed and used to determine the initial distribution function. Transformations to new bosonic variables rotating at the cavity frequency enable the six coupled equations for the new c-number functions–that are also equivalent to the canonical Grassmann distribution function–to be solved analytically, based on an ansatz from an earlier paper by Stenholm. It is then shown that the distribution function is exactly the same as that determined from the well-known solution based on coupled amplitude equations. In quantum–atom optics theories for many atom bosonic and fermionic systems are needed. With large atom numbers, treatments must often take into account many quantum modes—especially for fermions. Generalisations of phase space distribution functions of phase space variables for a few modes to phase space distribution functionals of field functions (which represent the field operators, c-number fields for bosons, Grassmann fields for fermions) are now being developed for large systems. For the fermionic case, the treatment of the simple two mode problem represented by the Jaynes–Cummings model is a useful test case for the future development of phase space Grassmann distribution functional methods for fermionic applications in quantum–atom optics. -- Highlights: •Novel phase space theory of the Jaynes–Cummings model using Grassmann variables. •Fokker–Planck equations solved analytically. •Results agree with the standard quantum optics treatment. •Grassmann phase space theory applicable to fermion many-body problems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Higher-dimensional numerical relativity: Formulation and code tests

We derive a formalism of numerical relativity for higher-dimensional spacetimes and develop numerical codes for simulating a wide variety of five-dimensional (5D) spacetimes for the first time. First, the Baumgarte-Shapiro-Shibata-Nakamura formalism is extended for arbitrary spacetime dimensions D{>=}4, and then, the so-called cartoon method, which was originally proposed as a robust method for simulating axisymmetric 4D spacetimes, is described for 5D spacetimes of several types of symmetries. Implementing 5D numerical relativity codes with the cartoon methods, we perform test simulations by evolving a 5D Schwarzschild spacetime and a 5D spacetime composed of a gravitational-wave packet of small amplitude. The numerical simulations are stably performed for a sufficiently long time, as done in the 4D case, and the obtained numerical results agree well with the analytic solutions: The numerical solutions are shown to converge at the correct order. We also confirm that a long-term accurate evolution of the 5D Schwarzschild spacetime is feasible using the so-called puncture approach. In addition, we derive the Landau-Lifshitz pseudotensor in arbitrary dimensions, and show that it gives a robust tool for computing the energy flux of gravitational waves. The formulations and methods developed in this paper provide a powerful tool for studying nonlinear dynamics of higher-dimensional gravity.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Design and assessment of a novel SPECT system for desktop open-gantry imaging of small animals: A simulation study

Purpose: Given increasing efforts in biomedical research utilizing molecular imaging methods, development of dedicated high-performance small-animal SPECT systems has been growing rapidly in the last decade. In the present work, we propose and assess an alternative concept for SPECT imaging enabling desktop open-gantry imaging of small animals. Methods: The system, PERSPECT, consists of an imaging desk, with a set of tilted detector and pinhole collimator placed beneath it. The object to be imaged is simply placed on the desk. Monte Carlo (MC) and analytical simulations were utilized to accurately model and evaluate the proposed concept and design. Furthermore, a dedicated image reconstruction algorithm, finite-aperture-based circular projections (FABCP), was developed and validated for the system, enabling more accurate modeling of the system and higher quality reconstructed images. Image quality was quantified as a function of different tilt angles in the acquisition and number of iterations in the reconstruction algorithm. Furthermore, more complex phantoms including Derenzo, Defrise, and mouse whole body were simulated and studied. Results: The sensitivity of the PERSPECT was 207 cps/MBq. It was quantitatively demonstrated that for a tilt angle of 30°, comparable image qualities were obtained in terms of normalized squared error, contrast, uniformity, noise, and spatial resolution measurements, the latter at ∼0.6 mm. Furthermore, quantitative analyses demonstrated that 3 iterations of FABCP image reconstruction (16 subsets/iteration) led to optimally reconstructed images. Conclusions: The PERSPECT, using a novel imaging protocol, can achieve comparable image quality performance in comparison with a conventional pinhole SPECT with the same configuration. The dedicated FABCP algorithm, which was developed for reconstruction of data from the PERSPECT system, can produce high quality images for small-animal imaging via accurate modeling of the system as incorporated in the forward- and back-projection steps. Meanwhile, the developed MC model and the analytical simulator of the system can be applied for further studies on development and evaluation of the system.

60 APPLIED LIFE SCIENCES↗

Black holes with MDRs and Bekenstein–Hawking and Perelman entropies for Finsler–Lagrange–Hamilton Spaces

New geometric and analytic methods for generating exact and parametric solutions in generalized Einstein–Finsler like gravity theories and nonholonomic Ricci soliton models are reviewed and developed. We show how generalizations of the Schwarzschild–(anti) de Sitter metric can be constructed for modified gravity theories with arbitrary modified dispersion relations, MDRs, and Lorentz invariance violations, LIVs. Such theories can be geometrized on cotangent Lorentz bundles (phase spaces) as models of relativistic Finsler–Lagrange–Hamilton spaces. There are considered two general classes of solutions for gravitational stationary vacuum phase space configurations and nontrivial (effective) matter sources or cosmological constants. Such solutions describe nonholonomic deformations of conventional higher dimension black hole, BH, solutions with general dependence on effective four dimensional, 4-d, momentum type variables. For the first class, we study physical properties of Tangherlini like BHs in phase spaces with generic dependence on an energy coordinate/parameter. We investigate also BH configurations on base spacetime and in curved cofiber spaces when the BH mass and the maximal speed of light determine naturally a cofiber horizon. For the second class, the solutions are constructed with Killing symmetry on an energy type coordinate. There are analyzed the conditions when generalizations of Bekenstein–Hawking entropy (for solutions with conventional horizons) and/or Grigory Perelman’s W-entropy (for more general generic off-diagonal solutions) can be defined for phase space stationary configurations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comprehensive analysis of common polymers using hyphenated TGA-FTIR-GC/MS and Raman spectroscopy towards a database for micro- and nanoplastics identification, characterization, and quantitation

Environmental contamination by micro- and nanoplastics (MNPs) is well documented with potential for their increased accumulation globally. Growing public concern over environmental, ecological, and human exposure to MNPs has led to exponential increase in publications, news articles, and reports. Significant knowledge gap exists in standardized analytical methods for the identification and quantification of MNPs from real world environmental samples. Here, in this study, we report comprehensive datasets utilizing thermogravimetric analyzer (TGA) coupled to a Fourier transformed infrared spectrometer (FTIR) and a gas chromatography/mass spectrometer (GC/MS) with corresponding Raman spectral data for the most common polymers documented to be present in the environment (35 plastics of 12 polymer types), to serve as a base line reference for the identification and quantitation of MNPs. Various parameters for TGA-FTIR-GC/MS data acquisition were optimized. Commercial consumer plastic product compositions were identified using this analytical database. Case studies to showcase the utility of the method for polymer mixtures analysis is included. This dataset would serve towards the development of a collaborative, global, comprehensive, and curated public database for the identification of various MNPs and mixtures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nonnegative tensor factorization for contaminant source identification

Unsupervised Machine Learning (ML) is becoming increasingly popular for solving various types of data analytics problems including feature extraction, blind source separation, exploratory analyses, model diagnostics, etc. In this work, we have developed a new unsupervised ML method based on Nonnegative Tensor Factorization (NTF) for identification of the original groundwater types (including contaminant sources) present in geochemical mixtures observed in an aquifer. Frequently, groundwater types with different geochemical signatures are related to different background and/or contamination sources. The characterization of groundwater mixing processes is a challenging but very important task critical for any environmental management project aiming to characterize the fate and transport of contaminants in the subsurface and perform contaminant remediation. This task typically requires solving complex inverse models representing groundwater flow and geochemical transport in the aquifer, where the inverse analysis accounts for available site data. Usually, the model is calibrated against the available data characterizing the spatial and temporal distribution of the observed geochemical types. Numerous different geochemical constituents and processes may need to be simulated in these models which further complicates the analyses. Additionally, the application of inverse methods may introduce biases in the analyses through the assumptions made in the model development process. Here, we substitute the model inversion with unsupervised ML analysis. The ML analysis does not make any assumptions about underlying physical and geochemical processes occurring in the aquifer. Our ML methodology, called NTFk, is capable of identifying (1) the unknown number of groundwater types (contaminant sources) present in the aquifer, (2) the original geochemical concentrations (signatures) of these groundwater types and (3) spatial and temporal dynamics in the mixing of these groundwater types. These results are obtained only from the measured geochemical data without any additional site information. In general, the NTFk methodology allows for interpretation of large high-dimensional datasets representing diverse spatial and temporal components such as state variables and velocities. NTFk has been tested on synthetic and real-world site three-dimensional datasets. Finally, the NTFk algorithm is designed to work with geochemical data represented in the form of concentrations, ratios (of two constituents; for example, isotope ratios), and delta notations (standard normalized stable isotope ratios).

58 GEOSCIENCES↗

Modeling and simulation of earthquake soil structure interaction excited by inclined seismic waves

Presented is an application of wave potential formulation (WPF) together with domain reduction method (DRM) to modeling earthquake soil structure interaction (ESSI) behavior in horizontally layered ground under inclined incident seismic waves. Wave potential formulation is used to develop a spatially varying, inclined seismic wave field from incident Primary (P) and Secondary (S) waves that propagate through layered ground. Developed seismic wave field is then used to develop effective forces for Domain Reduction Method that are then used for analyzing ESSI response of a soil structure system. Developed methodology, called WPF-DRM, is verified using analytic solution for a free field response of layered ground subjected to inclined incident waves. Developed WPF-DRM methodology is illustrated through analysis of an ESSI response of a deeply embedded structure, a small modular reactor (SMR) subjected to incident S wave polarized in vertical plane (SV) with variation in inclinations and frequencies. Presented example highlights the influences of incident wave inclination and frequency on ESSI response of analyzed SMR.

58 GEOSCIENCES↗

Thermal conductivity depth-profile reconstruction of multilayered cylindrical solids using the thermal-wave Green function method

In this paper, a theoretical model for characterizing solid multi-layered cylindrical samples illuminated by a modulated uniform incident beam is developed by means of the Green function method. The specific Green function for the multi-layered cylindrical structure is derived and an analytical expression for the thermal-wave field in such a cylindrical sample is presented. The thermal-wave field of an inhomogeneous cylindrical sample irradiated with incident light of arbitrary angular and/or radial intensity distribution was obtained using this theoretical model. Furthermore, experimental validation is also presented in the form of experimental results with steel cylinders of various diameters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Calculation of Coherent Synchrotron Radiation Impedance Using the Mode Expansion Method

We study an impedance due to coherent synchrotron radiation (CSR) generated by a short bunch of charged particles passing through a dipole magnet of finite length in a vacuum chamber of a given cross section. In our method we decompose the electromagnetic field of the beam over the eigenmodes of the toroidal chamber and derive a system of equations for the expansion coefficients in the series. The general method is further specialized for a toroidal vacuum chamber of a rectangular cross section where the eigenmodes can be computed analytically. We also develop a computer code that calculates the CSR impedance for a toroid of rectangular cross section. Numerical results obtained with the code are presented in the paper.

43 PARTICLE ACCELERATORS↗

Solving disorder in (3D) real space: a comparative study of the three-dimensional difference pair distribution function and atomic resolution holography reconstructions

The quantitative analysis of local ordering principles in disordered crystalline systems has gained much attention over the past few years, as it is often considered crucial for optimizing material functionality. This development has been driven by significant advancements in computational and experimental methods, which have led to the establishment and widespread use of various analytical techniques. In this study, we perform model calculations to compare the effectiveness of atomic resolution holography and three-dimensional difference pair distribution function analysis (3D-ΔPDF). Using Cu 3 Au as a model system, we demonstrate an approach to derive local order parameters quantitatively and show that both techniques are well suited to quantifying chemical short-range order correlations and local bond-distance variations. By evaluating the strengths and limitations of both techniques, we advocate for their combined use to solve complex short-range order problems accurately.

3D-ΔPDF↗

Analytical desmearing of Bonse–Hart ultra-small-angle neutron scattering data via truncated Abel inversion

A non-iterative analytical framework based on the truncated Abel inversion is developed for desmearing Bonse–Hart ultra-small-angle neutron scattering (USANS) data. The method directly inverts the slit-averaged intensity without empirical extrapolation or iterative regularization, establishing a closed-form relationship between the measured and intrinsic scattering profiles. Numerical benchmarks on representative models, including a rigid-line form factor, a Lorentzian function and a fractal structural model, demonstrate quantitative recovery of the ground-truth intensity across the full Q range. Application to a deuterated polystyrene/poly(2-vinylpyridine) blend further confirms that the approach yields smooth continuous profiles consistent with companion small-angle neutron scattering data. The truncated Abel inversion thus provides a stable, model-independent and physically transparent route for accurate desmearing of Bonse–Hart USANS measurements.

Huang, Guan-Rong [National Tsing Hua University, T↗

Analytical calculation of central-axis dosimetric data for a dedicated 6-MV radiosurgery linear accelerator

Narrow beams are extensively used in stereotactic radiosurgery. The accuracy of treatment planning dose calculation depends largely on how well the dosimetric data are measured during the machine commissioning. Narrow beams are characterized by the lack of lateral electronic equilibrium. The lateral electronic disequilibrium in the radiation field and detector's finite size are likely to compromise the accuracy in dose measurements in these beams. This may have a profound impact on outcome in patients who undergo stereotactic radiosurgery. To confirm the measured commissioning data for a dedicated 6-MV linear accelerator-based radiosurgery system, we developed an analytical model to calculate the narrow photon beam central-axis dose. This model is an extension of a previously reported method of Nizin and Mooij for the calculation of the absorbed dose under lateral electronic disequilibrium conditions at depth of d{sub max} or greater. The scatter factor and tissue-maximum ratio were calculated for narrow beams using the parametrized model and compared to carefully measured results for the same beams. For narrow beam radii ranging from 0.2 to 1.5 cm, the differences between the analytical and measured scatter factors were no greater than 1.4%. In addition, the differences between the analytical and measured tissue-maximum ratios were within 3.3% for regions greater than the maximum dose depth. The estimated error of this analytical calculation was less than 2%, which is sufficient to validate measurement results.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Electromagnetic Pulse Excitation of Finite-Long Dissipative Conductors over a Conducting Ground Plane in the Time Domain

This report details the modeling results for the response of a finite-length dissipative conductor interacting with a conducting ground to a hypothetical nuclear device with the same output energy spectrum as the Fat Man device. We use a time-domain method based on transmission line theory that allows accounting for time-varying air conductivities. We implemented such method in a code we call ATLOG - Analytic Transmission Line Over Ground. Results are compared the frequency-domain version of ATLOG previously developed and to the circuit simulator Xyce in some instances. Intentionally Left Blank

24 POWER TRANSMISSION AND DISTRIBUTION↗

Modeling Complex Relationships in Large-Scale Data using Hypergraphs (LDRD Final Report)

This SAND report documents the findings of the LDRD project, "Modeling Complex Relationships in Large-Scale Data using Hypergraphs". The project ran from October 2017 through September 2019. The focus of the project was the development and application of hypergraph data analytics to Sandia relational data applications. In this project, we attempted to apply a hypergraph data analysis method—specifically, hypergraph eigenvector centrality—to Sandia mission problems to identify influential entities (people, location, times, etc.) in the data. Unfortunately, the application data led to graph and hypergraph representations containing disconnected components. To date, there are no well-established techniques for applying eigenvector centrality to such graphs and hypergraphs. In this report, we present several heuristics for computing eigenvector centrality for disconnected graphs. We believe this is an important start to understanding how to approach the similar problem for hypergraphs, but this project concluded before we made progress on that problem. The ideas, methods, and suggestions presented here can be used for further research into this challenging problem. We also present our ideas for generating graphs with known degree and centrality distributions. The goal in presenting this work is to identify a procedure for analyzing such graphs once the problem of addressing disconnected components has been addressed. When working with a single data set, this generator can be used to create many instances of graphs that can be used to analyze the robustness of the centrality computations for the original data set. Although the results did not match perfectly in the case of the Facebook Ego dataset used in the experiments presented here, this again represents a good start in the direction of a graph generator for such problems. We note that there are potential trade-offs between how the degree and centrality distributions are fit to the original data and suggested several possible avenues for follow-on research efforts.

97 MATHEMATICS AND COMPUTING↗

Skylab extravehicular mobility unit thermal simulator

The analytical methods, thermal model, and user's instructions for the Skylab Extravehicular Mobility Unit (SEMU) routine are presented. This digital computer program was developed for detailed thermal performance predictions of the SEMU on the NASA-JSC Univac 1108 computer system. It accounts for conductive, convective, and radiant heat transfer as well as fluid flow and special component characterization. The program provides thermal performance predictions for a 967 node thermal model in one thirty-sixth (1/36) of mission time when operated at a calculating interval of three minutes (mission time). The program has the operational flexibility to: (1) accept card or magnetic tape data input for the thermal model describing the SEMU structure, fluid systems, crewman and component performance, (2) accept card and/or magnetic tape input of internally generated heat and heat influx from the space environment, and (3) output tabular or plotted histories of temperature, flow rates, and other parameters describing system operating modes.

Hixon, C. W.↗