Search NASA⌕ Search

SEARCH · Search NASA

Results for “Concurrent effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Development of a Technical Standard for Radiological Characterization of DAW - 18062

Throughout its 70+-year history, the U.S. Department of Energy (DOE) and its predecessor agencies have performed a wide mission involving nuclear materials and weapons development, production, testing, and modernization. While the initial mission components relied heavily upon reactor physics and chemistry, the environmental programs have increasingly relied upon development of more accurate and effective measurement methodologies to determine the radiological and chemical properties of the unique waste streams that were generated during the weapons production and testing mission. Over time, the DOE laboratories and former production sites have developed a wide range of site-specific processes and procedures for conducting radiological characterization of dry active waste (DAW) that is managed as low-level radioactive waste. This has resulted in a Complex-wide variability among sites with respect to the methodologies and instrumentation used to characterize individual waste streams. The DAW-type waste was selected for development of a characterization standard since it is a simple, voluminous, and repetitive waste stream with a substantial knowledge base, established experience history at multiple site locations, and the potential for realization of programmatic benefits though standardization. The Energy Facility Contractors Group (EFCOG) Waste Management Working Group (WMWG) has proposed the development of a new DOE Technical Standard for radiological characterization of DAW. The purpose of the proposed new standard is to provide a technical resource that integrates and enhances the utilization of current site-specific methodologies and processes. A Technical Basis Document (TBD) has been prepared to support the development and utilization of the new standard by providing detailed information for use by site personnel when implementing the guidance provided in the standard. It also provides the rationale for and details concerning the recommended technical approaches for radiological characterization of representative DAW-type waste streams. The TBD will be included as an appendix to the proposed standard. Adoption of a standardized approach to DAW characterization will take advantage of multiple applications for a technology that is both mature and stable. The DAW characterization process is repetitive and lends itself to implementation at a wide range of operating locations - resulting in economies of scale, compliance with regulatory requirements, and consistent implementation of procedures which support design, operations, maintenance, and management of facilities, activities and programs. The purpose of the proposed new Technical Standard for DAW Radiological Characterization is to integrate and improve the utilization of current site-specific methodologies and processes and will include a comprehensive evaluation and comparison of current radiological characterization methodologies to determine which ones are most reliable and effective in producing relevant and valid data. In view of the long history and participation by several agencies in the regulation of nuclear programs, existing Voluntary Consensus Standards have also been reviewed for relevancy and applicability to the new proposed standard. The proposed new Standard will be developed in concert with existing scientific and regulatory guidance to produce a document that incorporates the state of current knowledge and site practices with a graded approach to applying those methodologies that are applicable and effective for characterizing a wide range of DAW-type wastes - including, but not limited to, debris, low specific activity (LSA) material, and surface contaminated objects (SCO). Under the leadership of the National Laboratory Subgroup of the EFCOG/WMWG), an EFCOG team will develop the proposed technical standard. This process will incorporate the information gathered during preparation of the TBD, which will serve as a technical resource to support the technical approach for selection of DAW characterization methodologies. Preparation of the TBD included a detailed survey of historical site practices and examination of the characterization approaches and measurement methodologies currently being applied to DAW-type wastes. Future activities include the development and submittal of a Project Justification Statement that will be submitted to the DOE Technical Standards Program for review and comment. The EFCOG/WMWG Team will respond to reviewer comments, as required. Following final concurrence by affected organizations through the DOE Technical Standards Coordination process, the EFCOG/WMWG Team will prepare the draft technical standard and respond to comments generated during RevCom review and final format review by the DOE Technical Standards Management Program. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Range-wide population assessments for subalpine fir indicate widespread disturbance-driven decline

Subalpine forests in western North America are threatened by rapid climate change, increased activity by endemic and exotic insects and diseases, and changing wildfire regimes. The interactive effects of these stressors have resulted in pronounced population declines in many subalpine tree species; however, a systematic assessment of the status and trends of subalpine forests is lacking. Subalpine fir (Abies lasiocarpa) is a widespread species across the western United States, with documented population declines in many parts of its distribution. Here we use subalpine fir as an initial leverage point to build a more complete understanding of subalpine forest baseline conditions and responses to environmental change. Specifically, we leverage the USDA Forest Service Forest Inventory and Analysis (FIA) database to (1) ask how subalpine fir populations are changing across the species’ distribution in the western US, (2) assess the drivers of recent subalpine fir population trends, and (3) explore whether those changes imply generalized species-wide and/or system-wide decline. We found that subalpine fir abundance and basal area are declining concurrently across ~ 62% of the species’ distribution, and increasing across ~ 19%. Range-wide, we estimated 25.02 ± 2.74 % subalpine fir mortality between 2000 and 2009 and 2010–2019 FIA inventory periods, with higher mortality concentrated in the eastern Oregon Cascades, central Idaho, and parts of southern Colorado. High regeneration density did not predict positive population trajectories, which were instead associated with higher rates of adult recruitment. While the importance of different mortality agents varied substantially between ecoregions, 83.4% of total range-wide mortality was related to fire or biological disturbance. Declining subalpine fir basal area coincided with declines in the basal area of other co-occurring tree species in 39% of subalpine forest area, and with increases in conspecific basal area in 22% of forest area. Fire disturbance was the single largest cause of subalpine fir mortality; however, even where subalpine fir fire mortality was high, mortality among other species was primarily caused by insects. In conclusion, our results suggest that subalpine fir declines across large portions of the western United States are driven by forest disturbance, and that declines in subalpine fir populations may be indicative of negative change in subalpine forest systems broadly.

54 ENVIRONMENTAL SCIENCES↗

Catecholaminergic effects of prolonged head-down bed rest

Prolonged head-down bed rest (HDBR) provides a model for examining responses to chronic weightlessness in humans. Eight healthy volunteers underwent HDBR for 2 wk. Antecubital venous blood was sampled for plasma levels of catechols [norepinephrine (NE), epinephrine, dopamine, dihydroxyphenylalanine, dihydroxyphenylglycol, and dihydroxyphenylacetic acid] after supine rest on a control (C) day and after 4 h and 7 and 14 days of HDBR. Urine was collected after 2 h of supine rest during day C, 2 h before HDBR, and during the intervals 1-4, 4-24, 144-168 (day 7), and 312-336 h (day 14) of HDBR. All subjects had decreased plasma and blood volumes (mean 16%), atriopeptin levels (31%), and peripheral venous pressure (26%) after HDBR. NE excretion on day 14 of HDBR was decreased by 35% from that on day C, without further trends as HDBR continued, whereas plasma levels were only variably and nonsignificantly decreased. Excretion rates of dihydroxyphenylglycol and dihydroxyphenylalanine decreased slightly during HDBR; excretion rates of epinephrine, dopamine, and dihydroxyphenylacetic acid and plasma levels of catechols were unchanged. The results suggest that HDBR produces sustained inhibition of sympathoneural release, turnover, and synthesis of NE without affecting adrenomedullary secretion or renal dopamine production. Concurrent hypovolemia probably interferes with detection of sympathoinhibition by plasma levels of NE and other catechols in this setting. Sympathoinhibition, despite decreased blood volume, may help to explain orthostatic intolerance in astronauts returning from spaceflights.

Non-NASA Center↗

Study to Determine Adequate Margins in Radiotherapy Planning for Esophageal Carcinoma by Detailing Patterns of Recurrence After Definitive Chemoradiotherapy

Purpose: To ascertain the adequacy of radiotherapy (RT) margins by studying the relapse patterns after definitive chemoradiotherapy for carcinoma of the esophagus. Methods and Materials: We performed a retrospective study assessing the first site of disease relapse after definitive chemoradiotherapy that included four 3-weekly cycles of cisplatin and continuous infusion 5-fluorouracil, with conformal RT (50 Gy in 25 fractions) concurrent with Cycles 3 and 4. The RT planning target volume was the endoscopic ultrasonography/computed tomography-defined gross tumor volume with 1.5-cm lateral and 3-cm superoinferior margins. Results: A total of 145 patients were included. Their average age was 65.4 years, 45% had adenocarcinoma, 61% had lower third esophageal tumors, and 75% had Stage III-IVA disease. After RT, of 142 patients, 85 (60%) had evidence of relapse at a median follow-up of 18 months. The relapse was local (within the RT field) in 55; distant (metastatic) in 13, and a combination of local and distant in 14. The local relapse rates were not influenced by tumor stage, lymph node status, or disease length. Three patients developed a relapse in regions adjacent to the RT fields; however, it is unlikely that larger field margins would have been clinically acceptable or effective in these cases. The median overall survival was 15 months. Conclusion: The gross tumor volume-planning target volume margins in this study appeared adequate. Future efforts to improve outcomes using definitive chemoradiotherapy should be directed toward reducing the high rates of in-field and distant relapses.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Five Years' Experience Treating Locally Advanced Cervical Cancer With Concurrent Chemoradiotherapy and High-Dose-Rate Brachytherapy: Results From a Single Institution

Purpose: To assess the clinical outcomes after concurrent cisplatin chemotherapy and radiotherapy (RT) followed by high-dose-rate brachytherapy for locally advanced carcinoma of the cervix and perform a multivariate analysis of the prognostic factors. Methods and Materials: The outcomes were analyzed for all women treated between 1999 and 2004 with concurrent cisplatin chemotherapy and RT followed by high-dose-rate brachytherapy. Kaplan-Meier analysis was used for overall survival (OS), local control (LC), and distant control (DC). The Cox proportional hazards model was used to perform multivariate analysis of the prognostic variables. Results: The standard regimen comprised whole pelvic external RT 45 Gy in 25 fractions with concurrent weekly cisplatin 40 mg/m{sup 2}, followed by four high-dose-rate brachytherapy insertions of 6 Gy. Patients with radiologically enlarged para-aortic lymph nodes underwent extended-field RT. Of 92 patients, the OS rate was 72% at 2 years and 55% at 5 years. The LC rate was 76% at 2 years and 67% at 5 years. The DC rate was 68% at 2 years and 48% at 5 years. The most important prognostic factor for OS, LC, and DC was the pretreatment hemoglobin. For OS, the tumor size and the presence of enlarged lymph nodes were also important. For LC, the number of brachytherapy insertions was important; and for DC, the number of chemotherapy treatments was important. Of the patients, 4% experienced late Grade 3 or 4 toxicity. Conclusion: The results of our study have shown that the regimen is effective, with acceptable long-term side effects. In this cohort, the most important prognostic factor was the pretreatment hemoglobin level, a disease-related factor. However, more effective systemic treatments are needed.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Efficient Hierarchical State Vector Simulation of Quantum Circuits via Acyclic Graph Partitioning

Early but promising results in quantum computing have been enabled by the concurrent development of quantum algorithms, devices, and materials. Classical simulation of quantum programs has enabled the design and analysis of algorithms and implementation strategies targeting current and anticipated quantum device architectures. In this paper, we present a graph-based approach to achieve efficient quantum circuit simulation. Our approach involves partitioning the graph representation of a given quantum circuit into sub-graphs/circuits that exhibit better data locality. Simulation of each sub-circuit is organized hierarchically, with the iterative construction and simulation of smaller state vectors, improving overall performance. Also, this partitioning reduces the number of passes through data, improving the total computation time. We present three partitioning strategies and observe that acyclic graph partitioning typically results in the best time-to-solution. In contrast, other strategies reduce the partitioning time at the expense of potentially increased simulation times. Experimental evaluation demonstrates the effectiveness of our approach.

Fang, Bo↗

Evaluation of Satellite Remote Sensing Albedo Retrievals over the Ablation Area of the Southwestern Greenland Ice Sheet

MODerate resolution Imaging Spectroradiometer (MODIS) albedo products have been validated over spatially uniform, snow-covered areas of the Greenland ice sheet (GrIS) using the so-called single 'point-to-pixel' method. This study expands on this methodology by applying a 'multiple-point-to-pixel' method and examination of spatial autocorrelation (here using semivariogram analysis) by using in situ observations, high-resolution World- View-2 (WV-2) surface reflectances, and MODIS Collection V006 daily blue-sky albedo over a spatially heterogeneous surfaces in the lower ablation zone in southwest Greenland. Our results using 232 ground-based samples within two MODIS pixels, one being more spatial heterogeneous than the other, show little difference in accuracy among narrow and broad band albedos (except for Band 2). Within the more homogenous pixel area, in situ and MODIS albedos were very close (error varied from −4% to +7%) and within the range of ASD standard errors. The semivariogram analysis revealed that the minimum observational footprint needed for a spatially representative sample is 30 m. In contrast, over the more spatially heterogeneous surface pixel, a minimum footprint size was not quantifiable due to spatial autocorrelation, and far exceeds the effective resolution of the MODIS retrievals. Over the high spatial heterogeneity surface pixel, MODIS is lower than ground measurements by 4-7%, partly due to a known in situ undersampling of darker surfaces that often are impassable by foot (e.g., meltwater features and shadowing effects over crevasses). Despite the sampling issue, our analysis errors are very close to the stated general accuracy of the MODIS product of 5%. Thus, our study suggests that the MODIS albedo product performs well in a very heterogeneous, low-albedo, area of the ice sheet ablation zone. Furthermore, we demonstrate that single 'point-to-pixel' methods alone are insufficient in characterizing and validating the variation of surface albedo displayed in the lower ablation area. This is true because the distribution of in situ data deviations from MODIS albedo show a substantial range, with the average values for the 10th and 90th percentiles being −0.30 and 0.43 across all bands. Thus, if only single point is taken for ground validation, and is randomly selected from either distribution tails, the error would appear to be considerable. Given the need for multiple in-situ points, concurrent albedo measurements derived from existing AWSs, (low-flying vehicles (airborne or unmanned) and high-resolution imagery (WV-2)) are needed to resolve high sub-pixel variability in the ablation zone, and thus, further improve our characterization of Greenland's surface albedo.

Ablation zone↗

Locally Resolved Electron Emission Area and Unified View of Field Emission from Ultrananocrystalline Diamond Films

One of the common problems in case of field emission from polycrystalline diamond films, which typically have uniform surface morphology, is uncertainty in determining exact location of electron emission sites across the surface. Although several studies have suggested that grain boundaries are the main electron emission source, it is not particularly clear what makes some sites emit more than the others. It is also practically unclear how one could quantify the actual electron emission area and therefore field emission current per unit area. In this paper we study the effect of actual, locally resolved, field emission (FE) area on electron emission characteristics of uniform planar highly conductive nitrogen-incorporated ultrananocrystalline diamond ((N)UNCD) field emitters. It was routinely found that field emission from as-grown planar (N)UNCD films is always confined to a counted number of discrete emitting centers across the surface which varied in size and electron emissivity. It was established that the actual FE area critically depends on the applied electric field, as well as that the actual FE area and the overall electron emissivity improve with sp2 fraction present in the film irrespectively of the original substrate roughness and morphology. To quantify the actual FE area and its dependence on the applied electric field, imaging experiments were carried out in a vacuum system in a parallel-plate configuration with a specialty anode phosphor screen. Electron emission micrographs were taken concurrently with I-V characteristics measurements. In addition, a novel automated image processing algorithm was developed to process extensive imaging datasets and calculate emission area per image. By doing so, it was determined that the emitting area was always significantly smaller than the FE cathode surface area. Namely, the actual FE area would change from 5×10-3 % to 1.5 % of the total cathode area with the applied electric field increased. Finally and most importantly, it was shown that when I-E curves as measured in the experiment were normalized by the field-dependent emission area, the resulting j-E curves demonstrated a strong kink and significant deviation from Fowler-Nordheim (FN) law, and eventually saturated at a current density of ~100 mA/cm2 . This value was nearly identical for all (N)UNCD films measured in this study, regardless of the substrate.

36 MATERIALS SCIENCE↗

SU-E-T-258: Parallel Optimization of Beam Configurations for CyberKnife Treatments

Purpose: The CyberKnife delivers a large number of beams originating at different non-planar positions and with different orientation. We study how much the quality of treatment plans depends on the beams considered during plan optimization. Particularly, we evaluate a new approach to search for optimal treatment plans in parallel by running optimization steps concurrently. Methods: So far, no deterministic, complete and efficient method to select the optimal beam configuration for robotic SRS/SBRT is known. Considering a large candidate beam set increases the likelihood to achieve a good plan, but the optimization problem becomes large and impractical to solve. We have implemented an approach that parallelizes the search by solving multiple linear programming problems concurrently while iteratively resampling zero weighted beams. Each optimization problem contains the same set of constraints but different variables representing candidate beams. The search is synchronized by sharing the resulting basis variables among the parallel optimizations. We demonstrate the utility of the approach based on an actual spinal case with the objective to improve the coverage. Results: The objective function is falling and reaches a value of 5000 after 49, 31, 25 and 15 iterations for 1, 2, 4, and 8 parallel processes. This corresponds to approximately 97% coverage in 77%, 59%, and 36% of the mean number of iterations with one process for 2, 4, and 8 parallel processes, respectively. Overall, coverage increases from approximately 91.5% to approximately 98.5%. Conclusion: While on our current computer with uniform memory access the reduced number of iterations does not translate into a similar speedup, the approach illustrates how to effectively parallelize the search for the optimal beam configuration. The experimental results also indicate that for complex geometries the beam selection is critical for further plan optimization.

07 ISOTOPE AND RADIATION SOURCES↗

A New Concurrent Multiscale Methodology for Coupling Molecular Dynamics and Finite Element Analyses

The coupling of molecular dynamics (MD) simulations with finite element methods (FEM) yields computationally efficient models that link fundamental material processes at the atomistic level with continuum field responses at higher length scales. The theoretical challenge involves developing a seamless connection along an interface between two inherently different simulation frameworks. Various specialized methods have been developed to solve particular classes of problems. Many of these methods link the kinematics of individual MD atoms with FEM nodes at their common interface, necessarily requiring that the finite element mesh be refined to atomic resolution. Some of these coupling approaches also require simulations to be carried out at 0 K and restrict modeling to two-dimensional material domains due to difficulties in simulating full three-dimensional material processes. In the present work, a new approach to MD-FEM coupling is developed based on a restatement of the standard boundary value problem used to define a coupled domain. The method replaces a direct linkage of individual MD atoms and finite element (FE) nodes with a statistical averaging of atomistic displacements in local atomic volumes associated with each FE node in an interface region. The FEM and MD computational systems are effectively independent and communicate only through an iterative update of their boundary conditions. With the use of statistical averages of the atomistic quantities to couple the two computational schemes, the developed approach is referred to as an embedded statistical coupling method (ESCM). ESCM provides an enhanced coupling methodology that is inherently applicable to three-dimensional domains, avoids discretization of the continuum model to atomic scale resolution, and permits finite temperature states to be applied.

Yamakov, Vesselin↗

Development of an Integrated Countermeasure Device for Use in Long-Duration Space Flight

Prolonged weightlessness is associated with declines in musculoskeletal, cardiovascular, and sensorimotor health. Consequently, in-flight countermeasures are required to preserve astronaut health. We developed and tested a novel exercise countermeasure device (CCD) for use in spaceflight with the aim of preserving musculoskeletal and cardiovascular health along with an incorporated balance-training component. Additionally, the CCD features a compact footprint, and a low power requirement. Methods: After design and development of the CCD, we carried out a training study to test its ability to improve cardiovascular and muscular fitness in healthy volunteers. Fourteen male and female subjects (41.4+/-9.0 years, 69.5+/-15.4Kg) completed 12 weeks (3 sessions per week) of concurrent strength and endurance training on the CCD. Subjects were tested at baseline and after 12 weeks for 1-repetition max leg press strength (1RM), peak oxygen consumption (VO2peak), and isokinetic joint torque (ISO) at the hip, knee, and ankle. Additionally, we evaluated subjects after 6 weeks of training for changes in VO2peak and 1RM. Results: VO2peak and 1RM improved after 6-weeks, with additional improvements after 12 weeks (1.95+/-0.5, 2.28+/-0.5, 2.47+/-0.6 LY/min and 131.2+/-63.9,182.8+/-75.0, 207.0+/-75.0 Kg) for baseline, 6 weeks, and 12 weeks respectively. ISO for hip adduction, adduction, and ankle plantar flexion improved after 12 weeks of training (70.3+/-39.5, 76.8+/-39.2 and 55.7+/-21.7 N-m vs. 86.1+/-37.3, 85.1+/-34.3 and 62.1+/-26.4 N-m respectively). No changes were observed for ISO during hip flexion, knee extension, or knee flexion. Conclusions: The CCD is effective at improving cardiovascular fitness and isotonic leg strength in healthy adults. Further, the improvement in hip adductor and abductor torque provides support that the CCD may provide additional protection for the preservation of bone health at the hip.

Streeper, Tim↗

A Memory Efficient Lock-Free Circular Queue

Hardware queues are import in many applications, such as data transfer, synchronization of concurrent modules with the need of mutual exclusion constructs. State of the art bounded (of a fixed size) lock free circular queues are implemented either by read/write atomic operations, or barrier conditions, or by separating dequeue and enqueue operations. However, these queues always require an unused element at all the times to safe-guard the front and rear pointers of the queue, so as to avoid data race conditions, which leads to the waste of memory. The waste of memory is especially disadvantageous in applications such as I/O data transfer, and image transfer between processing filters, when large element size is needed, We propose a lock-free solution of the bounded circular queue through read/write atomic operations, but without the need of an extra element in the queue. The proposed solution is implemented and verified in both Verilog and ’C’ languages. We also demonstrate its effectiveness by comparing its area and delay metrics with the implementations of other existing designs of queue.

Miniskar, Narasinga Rao↗

Using Concurrent Cardiovascular Information to Augment Survival Time Data for Evaluating Orthostatic Tilt Test Performance

Head-up tilt (HUT) tests often are used in research to measure orthostatic intolerance (OI) (inability to appropriately control blood pressure while upright) in clinical populations and otherwise healthy individuals after interventions. Post-space flight orthostatic intolerance is a well-known phenomenon, and countermeasures to its development has been an active area of research at NASA. In the NASA HUT protocol, subjects lie horizontally on an automatic tilt table for baseline measurements before being raised to 80deg head-up tilt for a defined period of time or until signs or symptoms of presyncope ensues (light-headedness, nausea, dizziness, sweating, weakness or fainting). Multiple measures are collected to evaluate the cardiovascular system's ability to respond appropriately to the orthostatic challenge. However if the intended duration of the HUT is short, the ability to detect changes in OI due to an intervention or its prevention by a countermeasure may be limited by a small number of failures to permit comparisons based on survival time alone. Thus, the time-trajectory of the cardiovascular data becomes an important additional source of information. In particular, we will show how various measures of trajectory variability can effectively augment survival analysis for the assessment of OI in a joint model when high censoring rates are present.

Feiveson, Alan H.↗

Harnessing Data Movement in Virtual Clusters for In-Situ Execution

As a result of increasing data volume and velocity, Big Data science at exascale has shifted towards the in-situ paradigm, where large scale simulations run concurrently alongside data analytics. With in-situ, data generated from simulations can be processed while still in memory, thereby avoiding the slow storage bottleneck. However, running simulations and analytics together on shared resources will likely result in substantial contention if left unmanaged, as demonstrated in this work, leading to much reduced efficiency of simulations and analytics. Recently, virtualization technologies such as Linux containers have been widely applied to data centers and physical clusters to provide highly efficient and elastic resource provisioning for consolidated workloads including scientific simulations and data analytics. In this paper, we investigate to facilitate network traffic manipulation and reduce mutual interference on the network for in-situ applications in virtual clusters. In order to dynamically allocate the network bandwidth when it is needed, we adopt SARIMA-based techniques to analyze and predict MPI traffic issued from simulations. Although this can be an effective technique, the naïve usage of network virtualization can lead to performance degradation for bursty asynchronous transmissions within an MPI job. Here, we analyze and resolve this performance degradation in virtual clusters.

97 MATHEMATICS AND COMPUTING↗

FY16 ASC ATDM L2 Milestone: PARTISN Research and FleCSI Updates

These are slides for a presentation on PARTISN Research and FleCSI Updates. The following topics are covered: SNAP vs PARTISN, Background Research, Production Code (structural design and changes, kernel design and implementation, lessons learned), NuT IMC Proxy, FleCSI Update (design and lessons learned). It can all be summarized in the following manner: Kokkos was shown to be effective in FY15 in implementing a C++ version of SNAP's kernel. This same methodology was applied to a production IC code, PARTISN. This was a much more complex endeavour than in FY15 for many reasons; a C++ kernel embedded in Fortran, overloading Fortran memory allocations, general language interoperability, and a fully fleshed out production code versus a simplified proxy code. Lessons learned are Legion. In no particular order: Interoperability between Fortran and C++ was really not that hard, and a useful engineering effort. Tracking down all necessary memory allocations for a kernel in a production code is pretty hard. Modifying a production code to work for more than a handful of use cases is also pretty hard. Figuring out the toolchain that will allow a successful implementation of design decisions is quite hard, if making use of "bleeding edge" design choices. In terms of performance, production code concurrency architecture can be a virtual showstopper; being too complex to easily rewrite and test in a short period of time, or depending on tool features which do not exist yet. Ultimately, while the tools used in this work were not successful in speeding up the production code, they helped to identify how work would be done, and provide requirements to tools.

97 MATHEMATICS AND COMPUTING↗

Evolution and use of combined mechanical and thermal codes for cryogenic turbopump bearings

Shaft bearing system analysis codes were developed, improved, and used to investigate Space Shuttle Main Engine (SSME) Liquid Oxygen (LOX) turbopump bearing problems, and to support the Marshall Space Flight Center Bearing and Seal Materials Test (BSMT) program. Thermal network modeling uses the SINDA thermal code, and the modeling of bearing quasi-dynamic characteristics uses the SHABERTH bearing/shaft code. These codes are solved concurrently for a bearing/shaft system using software developed for this purpose. Simulation of the SSME LOX turbopump turbine and pump end bearings and the MSFC BSMT operating in liquid nitrogen (LN sub 2) and LOX was done. The thermal network models include the bearing components, bearing carriers, shaft, housing, frictional heat, and viscous fluid energy. A cage model was included to account for heat generation between the cage and rolling elements. Since most bearing surfaces operate at temperatures well above the coolant saturation temperature, and move at high speed relative to the coolant, forced convection boiling is the dominant mechanism for heat removal. Improved modeling of forced convection film boiling was incorporated to take into account the local vapor generation at the high temperature surfaces. Rearing preloads in the pump and tester are provided by preload springs. As bearing operating clearances and contact angles change due to thermal effects and loading, the bearing preload changes with these varying conditions. These characteristics were modeled and are included in the overall system models. Results from these models indicate an operational limit which, if exceeded, predicts a thermal excursion.

Cody, Joe C.↗

THE EFFECT OF POPULATION-WIDE MASS-TO-RADIUS RELATIONSHIPS ON THE INTERPRETATION OF KEPLER AND HARPS SUPER-EARTH OCCURRENCE RATES

The ongoing High Accuracy Radial velocity Planet Search (HARPS) has found that 30%-50% of G and K dwarfs in the solar neighborhood host planets with M{sub pl} {approx}< M{sub Nep} in orbits of P {<=} 50 days. At first glance, this high overall occurrence rate seems at best to be marginally consistent with the planet frequency measured during Q0-Q2 of the Kepler mission, whose 1235 detected planetary candidates naively imply that {approx}15% of main-sequence dwarfs harbor a short-period planet with R{sub pl} < 4 R{sub Circled-Plus }. A rigorous comparison between the two surveys is difficult, however, as they observe different stellar populations, measure different planetary physical properties, and are subject to radically different sampling plans. In this article, we report the results of a Monte Carlo study which seeks to partially overcome this apparent discrepancy by identifying plausible planetary population distributions which can jointly conform to the results of the two surveys. We find that, given the HARPS occurrence rate, either a population subject to a mass-density relationship extrapolated from our solar system or a population concurrently consisting of dense silicate-iron planets and low-density gaseous worlds can produce total numbers of planet candidates consistent with those actually detected by Kepler. However, these two mass-to-radius relationships (M-Rs) resolve the apparent occurrence rate discrepancy with different mass and period distributions, enabling future observations to rule out M-Rs that do not fully describe the observed planet population in a global sense. Extracting information of this nature from the transit-radial-velocity comparison has significant implications for the interpretation of planet occurrence rates: if a multi-valued M-R, which allows planets of similar mass to have significantly different radii, emerges from observational data, then multiple formation mechanisms are likely at work. In this event, HARPS may be detecting a large population of dense low-mass planets, while Kepler detects a large population of gaseous sub-Neptunes.

79 ASTRONOMY AND ASTROPHYSICS↗

Safety and Efficacy of Stereotactic Radiosurgery and Adjuvant Bevacizumab in Patients With Recurrent Malignant Gliomas

Purpose: Patients with recurrent malignant gliomas treated with stereotactic radiosurgery (SRS) and multiagent systemic therapies were reviewed to determine the effects of patient- and treatment-related factors on survival and toxicity. Methods and Materials: A retrospective analysis was performed on patients with recurrent malignant gliomas treated with salvage SRS from September 2002 to March 2010. All patients had experienced progression after treatment with temozolomide and radiotherapy. Salvage SRS was typically administered only after multiple postchemoradiation salvage systemic therapies had failed. Results: 63 patients were treated with SRS for recurrent high-grade glioma; 49 patients had World Health Organization (WHO) Grade 4 disease. Median follow-up was 31 months from primary diagnosis and 7 months from SRS. Median overall survival from primary diagnosis was 41 months for all patients. Median progression-free survival (PFS) and overall survival from SRS (OS-SRS) were 6 and 10 months for all patients, respectively. The 1-year OS-SRS for patients with Grade 4 glioma who received adjuvant (concurrent with or after SRS) bevacizumab was 50% vs. 22% for patients not receiving adjuvant bevacizumab (p = 0.005). Median PFS for patients with a WHO Grade 4 glioma who received adjuvant bevacizumab was 5.2 months vs. 2.1 months for patients who did not receive adjuvant bevacizumab (p = 0.014). Karnofsky performance status (KPS) and age were not significantly different between treatment groups. Treatment-related Grade 3/4 toxicity for patients receiving and not receiving adjuvant BVZ was 10% and 14%, respectively (p = 0.58).On multivariate analysis, the relative risk of death and progression with adjuvant bevacizumab was 0.37 (confidence interval [CI] 0.17-0.82) and 0.45 (CI 0.21-0.97). KPS >70 and age <50 years were significantly associated with improved survival. Conclusions: The combination of salvage radiosurgery and bevacizumab to treat recurrent malignant gliomas is well tolerated and seems to be associated with improved outcomes. Prospective multiinstitutional studies are required to determine efficacy and long-term toxicity with this approach.

62 RADIOLOGY AND NUCLEAR MEDICINE↗