Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction optics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Highly tunable elastic dielectric metasurface lenses

Abstract Dielectric metasurfaces are two‐dimensional structures composed of nano‐scatterers that manipulate the phase and polarization of optical waves with subwavelength spatial resolution, thus enabling ultra‐thin components for free‐space optics. While high performance devices with various functionalities, including some that are difficult to achieve using conventional optical setups have been shown, most demonstrated components have fixed parameters. Here, we demonstrate highly tunable dielectric metasurface devices based on subwavelength thick silicon nano‐posts encapsulated in a thin transparent elastic polymer. As proof of concept, we demonstrate a metasurface microlens operating at 915 nm, with focal distance tuning from 600 μm to 1400 μm (over 952 diopters change in optical power) through radial strain, while maintaining a diffraction limited focus and a focusing efficiency above 50%. The demonstrated tunable metasurface concept is highly versatile for developing ultra‐slim, multi‐functional and tunable optical devices with widespread applications ranging from consumer electronics to medical devices and optical communications. image

Kamali, Seyedeh Mahsa↗

Anisotropy of Optical Activity in Langasite Family Crystals

The rotation of the plane of polarization of light transmitted in the directions parallel (ρ{sub ||}) and perpendicular (ρ{sub ⊥}) to the optical axis has been calculated for langasite family crystals. It is shown that the ρ{sub ||} and ρ{sub ⊥} values are, respectively, negative and positive for all the right-handed crystals under study. An analysis of the interatomic potential constructed based on X-ray diffraction data has suggested that this anisotropy of optical activity is structurally based of electron density regions shaped as helices. The atomic helix with an axis parallel to the optical axis is right-handed and three-start, whereas in the direction perpendicular to the optical axis there are three left-handed two-start helices, which intersect in the origin of the unit-cell coordinate system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, optical and electrical behavior of zinc oxide/MWCNT composite thin films

ZnO/MWCNT composite thin films were prepared on glass substrates by spray pyrolysis, and their structural and optical behavior were investigated. X-ray diffraction analysis revealed the films hexagonal wurtzite phase with a preferred (002) growth orientation. Photoluminescence spectra of the ZnO film showed two main bands, a UV emission band at 377 nm (3.28 eV) and a broad blue-yellow band at 439–546 nm with a band at 503 nm. Optical transmittance of 80–85% in the visible range was observed in all the films. In the I–V curves, conductivity was improved when incorporating the MWCNT into the zinc oxide. ZnO/MWCNT, at a value of 2 V and irradiated with visible light presented an increased current from 0.6 to 3.2 nA, and a similar pattern was observed when impinging UV light. Film thickness was measured by profilometry, obtaining thicknesses in the range from 143 to 257 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

CHARACTERIZATION OF DEFECTS IN ALLOY 152, 52 AND 52M WELDS

Defect distributions have been documented by optical metallography, scanning electron microscopy and electron backscatter diffraction in alloy 152 and 52 mockups welds, alloy 52 and 52M overlay mockups and an alloy 52M inlay. Primary defects were small cracks at grain boundaries except for more extensive cracking in the dilution zone of an alloy 52 overlay on 304SS. Detailed characterizations of the dilution zone cracks were performed by analytical transmission electron microscopy identifying grain boundary titanium-nitride precipitation associated with the intergranular separations. I. INTRODUCTION Weldments continue to be a primary location of stress-corrosion cracking (SCC) in light-water reactor systems. While problems related to heat-affected-zone (HAZ) sensitization and intergranular (IG) SCC of austenitic stainless alloys in boiling-water reactors (BWRs) have been significantly reduced, SCC has now been observed in HAZs of non-sensitized materials and in dissimilar metal welds where Ni-base alloy weld metals are used. IGSCC in weld metals has been observed in both BWRs and pressurized water reactors (PWRs) with recent examples for PWR pressure vessel penetrations producing the most concern. This has led to the replacement of alloy 600/182/82 welds with higher Cr, more corrosion-resistant replacement materials (alloy 690/152/52/52M). Complicating this issue has been a known susceptibility to cracking during welding [1-7] of these weld metals. There is a critical need for an improved understanding of the weld metal metallurgy and defect formation in Ni-base alloy welds to effectively assess long-term performance. A series of macroscopic to microscopic examinations were performed on available mockup welds made with alloy 52 or alloy 152 plus selected overlay and inlay mockups. The intent was to expand our understanding of weld metal structures in simulated LWR service components with a focus on as-welded defects. Microstructural features, defect distributions, defect characteristics and weld residual strains were examined by optical metallography, scanning electron microscopy, electron backscatter diffraction and transmission electron microscopy. Industry-supplied mock-up welds were characterized including alloy 52 and 152 weldments, alloy 52M overlay and inlay welds, and an alloy 52 overlay. II. WELDMENTS II.A. Alloy 52 and 152 Weld Mockups The alloy 52 and 152 weld mockups were fabricated by MHI for the Kewaunee reactor and were obtained from the EPRI NDE Center. The mockups were U-groove welds joining two plates of 304SS as shown in Figure 1. Alloy 152 butter (heat 307380) was placed on the U-groove surface for both mockups by shielded metal arc welding (SMAW). For the alloy 152 weld mockup, the alloy 152 fill (heat 307380) was also applied using SMAW while for the alloy 52 weld mockup, the alloy 52 fill (heat NX2686JK) was applied using gas tungsten arc welding (GTAW). Welding parameters for the fill materials were substantially different with the alloy 152 SMAW having a deposition speed of 4-25 cm/min with a current of 95-145 A and the alloy 52 GTAW having a deposition speed of 4-10 cm/min with a current of 150-300 A. One prominent feature in these mockup welds is the presence of a crack starting at the 304SS butt joint at the bottom of the U-groove and extending up into the weld. It appears that the 304SS plate on either side of the butt joint acted as an anchor for the weld resulting in a stress rise across the slit that drove crack formation and extension up into the fill weld. As will be shown in the next section, the extent of the cracking around this stress riser was much greater in the MHI 52 weld mockup.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Effect of reaction atmosphere on structural and optical properties of hexagonal molybdenum oxide (h-MoO{sub 3})

The present work aims to synthesize single phase h-MoO{sub 3} nanocrytals by chemical precipitation method exposed under different reaction atmospheres. The reaction atmosphere have been successfully tuned as air, nitrogen and argon and studied its effects on structural, functional, morphology and optical properties by using X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy and diffuse reflectance spectroscopy (DRS) measurements. The XRD result indicates that the sample exhibits characteristic hexagonal phase of MoO{sub 3}. The crystallite size is estimated by well known Scherrer’s method. The crystallite size is relative small in the case of sample prepared at argon atmosphere. The functional groups such as Mo-O, N-H and O-H are identified from FT-IR spectroscopy. The particle exhibits rod like morphology with perfect hexagonal cross-section. The optical absorption observed at 420-450 nm corresponds to fundamental optical absorption by h-MoO{sub 3}. The band gap values are estimated using Kublka-Munk (K-M) function and found to be 2. 87 eV, 2.93 eV and 2.97 eV for samples synthesized under air, nitrogen and argon, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Disappearing and Reappearing Polymorphism in p-Methylchalcone

One stable form (Form I) and two metastable forms (Forms II and IV) of p-methylchalcone have been obtained, with Form II having previously been reported to be a disappearing polymorph. To prevent the conversion of Form II, which has a melting point of 89-91 C, into the stable form it was produced in conditions free from seeds of the stable form. Form IV was discovered serendipitously as a single crystal that appeared in the preparation of a powder of Form II. Forms I and II have also been characterized by optical microscopy, differential scanning calorimetry (DSC), variable temperature powder X-ray diffraction, and spectroscopic analysis. The crystal structures of these three forms have been solved, Forms I and IV by single-crystal methods and Form II from synchrotron powder diffraction. This investigation highlights the fact that the challenges of reproducing experimental results (i.e., the production of a particular crystal form) may be overcome by a systematic search for new conditions under which previously obtained results can be regained.

36 MATERIALS SCIENCE↗

Photoluminescence and energy storage traps in CaTiO{sub 3}:Pr{sup 3+}

Red-emitting CaTiO{sub 3}:Pr{sup 3+} phosphors are fabricated using a solid state method and structurally characterized by X-ray diffraction and field emission scanning electron microscopy. The optical properties are investigated using photoluminescence emission, excitation, photoluminescence decay curves, diffused reflectance and thermoluminescence spectra, and persistent phosphorescence decay curves. The optimal fabrication temperatures for photoluminescence and persistent phosphorescence are found at 1200-1300 {sup o}C for photoluminescence and 1400 {sup o}C for persistent phosphorescence. The energy storage traps for persistent phosphorescence in the system are analyzed based on the dependence of photoluminescence and persistent phosphorescence on sintering temperature. The distribution of energy storage traps is further characterized by thermoluminescence spectra and the parameters of the traps are calculated. Oxygen vacancies as the main trapping centers play the key role for persistent phosphorescence in CaTiO{sub 3}:Pr{sup 3+}.

36 MATERIALS SCIENCE↗

Observation of higher-order diffraction features in self-assembled photonic crystals

The optical response of high quality three dimensionally (3D) ordered photonic crystals is analyzed in the high energy region. By tuning the reflectance with the angle of incidence of light, the peaks in the reflection spectrum that correspond to the first, second, and third order photonic stop bands and the van Hove singular point in the photon density of states are clearly distinguished. The high energy features have been observed for photonic crystals made from colloids of different diameters, having different index contrast and fabricated by two different self-assembly routes. The observation of van Hove singularity at near-normal incidence of light and its presence even in low index-contrast photonic crystals provide conclusive evidence that these high energy features are due to the perfect periodic ordering present in the photonic crystals with less defects and disorder.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A study of three techniques used in the diffraction analysis of shaped dual-reflector antennas

An examination is presented of three techniques used for the efficient computation of fields diffracted by a subreflector that has been shaped by geometrical optics synthesis. It is found that these techniques, which are based on the geometrical theory of diffraction (GTD), produce errors in the computed fields that are specific to shaped reflectors. These errors are examined for a reflector system shaped to produce maximum gain from a tapered feed illumination. The discrepancies are directly related to the caustic being located near an observation point of the GTD calculations. The errors found are localized, and they increase in magnitude as the caustic approaches the main reflector. In a general offset geometry, the location of the caustic may be located arbitrarily close to the main reflector given a prescribed output aperture distribution. For the specific case considered here-the common situation of shaping to produce maximum gain-the caustic is located near the edge of the main reflector and on the reflection shadow boundary. A local correction is derived which creates a uniform solution through the caustic and across the reflection shadow boundary. Away from this point the calculation receeds to the standard GTD solution.

Cwik, Tom A.↗

Isomorphism and solid solutions among Ag- and Au-selenides

Au-Ag selenides were synthesized by heating stoichiometric mixtures of elementary substances of initial compositions Ag{sub 2−x}Au{sub x}Se with a step of x=0.25 (0≤x≤2) to 1050 °C and annealing at 500 °C. Scanning electron microscopy, optical microscopy, electron microprobe analysis and X-ray powder diffraction methods have been applied to study synthesized samples. Results of studies of synthesized products revealed the existence of three solid solutions with limited isomorphism Ag↔Au: naumannite Ag{sub 2}Se – Ag{sub 1.94}Au{sub 0.06}Se, fischesserite Ag{sub 3}AuSe{sub 2} - Ag{sub 3.2}Au{sub 0.8}Se{sub 2} and gold selenide AuSe - Au{sub 0.94}Ag{sub 0.06}Se. Solid solutions and AgAuSe phases were added to the phase diagram of Ag-Au-Se system. Crystal-chemical interpretation of Ag-Au isomorphism in selenides was made on the basis of structural features of fischesserite, naumannite, and AuSe. - Highlights: • Au-Ag selenides were synthesized. • Limited Ag-Au isomorphism in the selenides is affected by structural features. • Some new phases were introduced to the phase diagram Ag-Au-Se.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation on effects of surface morphologies on response of LPG sensor based on nanostructured copper ferrite system

Graphical abstract: Figure shows the variations in resistance with time for copper ferrite system synthesized in various molar ratio. A maximum variation in resistance was observed for copper ferrite prepared in 1:1 molar ratio. Highlights: ► Evaluation of structural, optical and surface morphologies. ► Significant variation in LPG sensing properties. ► Surface modification of ferric oxide pellet by copper ferrite. ► CuFe{sub 2}O{sub 4} pellets for LPG sensing at room temperature. -- Abstract: Synthesis of a copper ferrite system (CuFe{sub 2}O{sub 4}) via chemical co-precipitation method is characterized by X-ray diffraction, surface morphology (scanning electron microscope) and optical absorption spectroscopy. These characteristics show their dependence on the relative compositions of the two subsystems. They are further confirmed by the variation in the band gap. A study of gas sensing properties shows the spinel CuFe{sub 2}O{sub 4} synthesized in 1:1 molar ratio exhibit best response to LPG adsorption/resistance measurement. Thus resistance based LPG sensor is found robust, cheap and may be applied for kitchens and industrial applications.

36 MATERIALS SCIENCE↗

Phase equilibria in systems Ce-M-Sb (M=Si, Ge, Sn) and superstructure Ce{sub 12}Ge{sub 9-x}Sb{sub 23+x} (x=3.8+-0.1)

Phase relations in the ternary systems Ce-M-Sb (M=Si, Ge, Sn) in composition regions CeSb{sub 2}-Sb-M were studied by optical and electron microscopy, X-ray diffraction, and electron probe microanalysis on arc-melted alloys and specimens annealed in the temperature region from 850 to 200 deg. C. The results, in combination with an assessment of all literature data available, were used to construct solidus surfaces and a series of isothermal sections. No ternary compounds were found to form in the Ce-Si-Sb system whilst Ce{sub 12}Ge{sub 9-x}Sb{sub 23+x} (3.3<x<4.2) and CeSn{sub x}Sb{sub 2} (0.1<x<0.8) participate in phase equilibria in the composition region investigated. Crystallographic parameters for the ternary compound Ce{sub 12}Ge{sub 9-x}Sb{sub 23+x} (x=3.8+-0.1) were determined from X-ray single crystal and powder diffraction. For the binary system Ge-Sb a eutectic was defined Lreversible(Ge)+(Sb) at 591.6 deg. C and 22.5 at%. Ge EPMA revealed a maximal solubility of 6.3 at% Ge in (Sb) at the eutectic temperature. - Graphical abstract: Phase relations in the ternary systems Ce-M-Sb (M=Si, Ge, Sn) in composition regions CeSb{sub 2}-Sb-M have been studied by optical and electron microscopy, XRD and EPMA on as cast alloys and specimens annealed in the temperature region 200-850 deg. C.

36 MATERIALS SCIENCE↗

Spatial and spectral image distortions caused by diffraction of an ordinary polarised light beam by an ultrasonic wave

We consider the problem of determining the spatial and spectral image distortions arising from anisotropic diffraction by ultrasonic waves in crystals with ordinary polarised light (o → e). By neglecting the small-birefringence approximation, we obtain analytical solutions that describe the dependence of the diffraction angles and wave mismatch on the acousto-optic (AO) interaction geometry and crystal parameters. The formulas derived allow one to calculate and analyse the magnitude of diffraction-induced spatial and spectral image distortions and to identify the main types of distortions: chromatic compression and trapezoidal deformation. A comparison of the values of these distortions in the diffraction of ordinary and extraordinary polarised light shows that they are almost equal in magnitude and opposite in signs, so that consistent diffraction (o → e → o or e → o → e) in two identical AO cells rotated through 180° in the plane of diffraction can compensate for these distortions. (diffraction of radiation)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Sensitivity of Shaped Pupil Coronagraphs to Optical Aberrations

Unlike focal-plane coronagraphs that use occulting spots and Lyot stops to eliminate diffraction, pupil-plane coronagraphs operate by shaping the pupil to redirect the diffracted stellar light into a tight core. As in focal-plane coronagraphs, the optical aberrations in the telescope must be sufficiently corrected to enable high contrast imaging. However, in shaped-pupil coronagraphs, the low-order aberrations resulting from misalignment and optical figure drift have a much smaller influence upon the contrast at at the inner working angle. These weaker sensitivities greatly relax the strict low-order wavefront stability required for high-contrast imaging the cost of some throughput. In this paper, we present the simulated performance of the concentric ring shaped pupil concepts comparing them to focal-plane coronagraphs that are optimized for the same inner working angles.

extrasolar planets↗

A comparative study of physico-chemical properties of CBD and SILAR grown ZnO thin films

Graphical abstract: Schematic model indicating ZnO nanorods by CBD (Z{sub 1}) and nanograins by SILAR (Z{sub 2}). - Highlights: • Simple methods for the synthesis of ZnO thin films. • Comparative study of physico-chemical properties of ZnO thin films prepared by CBD and SILAR methods. • CBD outperforms SILAR method. - Abstract: In the present work, nanocrystalline zinc oxide (ZnO) thin films have been successfully deposited onto glass substrates by simple and economical chemical bath deposition (CBD) and successive ionic layer adsorption reaction (SILAR) methods. These films were further characterized for their structural, optical, surface morphological and wettability properties. The X-ray diffraction (XRD) patterns for both CBD and SILAR deposited ZnO thin films reveal the highly crystalline hexagonal wurtzite structure. From optical studies, band gaps obtained are 2.9 and 3.0 eV for CBD and SILAR deposited thin films, respectively. The scanning electron microscope (SEM) patterns show growth of well defined randomly oriented nanorods and nanograins on the CBD and SILAR deposited samples, respectively. The resistivity of CBD deposited films (10{sup 2} Ω cm) is lower than that of SILAR deposited films (10{sup 5} Ω cm). Surface wettability studies show hydrophobic nature for both films. From the above results it can be concluded that CBD grown ZnO thin films show better properties as compared to SILAR method.

36 MATERIALS SCIENCE↗

Hyperspectral Dark Field Optical Microscopy of Single Silver Nanospheres

We record spectrally (400 nm ≤ λ ≤ 675 nm, Δλ < 4.69 nm) and spatially (diffraction-limited, sampled at 85 nm2/pixel) resolved dark field (DF) scattering from single silver nanospheres of 100 nm in diameter. Hyperspectral DF optical microscopy is achieved by coupling a hyperspectral detector to an optical microscope, whereby spectrally resolved diffraction-limited images of hundreds of silver nanoparticles can be recorded in ~30 seconds. We demonstrate how the centers and edges of individual particles can be localized in 2D to within a single pixel (85 nm2), using a statistical method for examining texture based on a co-occurrence matrix. Subsequently, spatial averaging of the spectral response in a 3x3 pixel area around the particle centers affords ample signal-to-noise to resolve the plasmon resonance of a single silver nanosphere. A close inspection of the scattering spectra of 31 different nanospheres reveals that each particle has its unique (i) relative scattering efficiency, and (ii) plasmon resonance maximum and dephasing time. These observations are suggestive of nanometric structural variations over length scales much finer than the spatial resolution attainable using the all-optical technique described herein.

Dark Field Scattering↗