Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic Profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Atomic insight into concurrent He, D, and T sputtering and near-surface implantation of 3C-SiC crystallographic surfaces

We present results from atomistic simulations of sputtering and near-surface implantation of concurrent He, D, and T bombardment of cubic silicon carbide (3C-SiC). This is achieved by first establishing a many-body interatomic potential parameter set to treat interactions of He and hydrogenic species in 3C-SiC informed by ab-initio calculations. To obtain sputtering yields we perform both classical molecular dynamics and binary collision approximation simulations for normal incident particles having energies ranging from 25 to 800 eV. We find that due to differences in species surface binding energy of various crystallographic surfaces in 3C-SiC, the sputtering yield of Si is significantly less than that of C, but sputtering yields show limited sensitivity to crystallographic surface orientation. An exception to this occurs when the terminating crystallographic surface plane is more rich in Si rather than C, resulting in comparable sputtering yields of Si and C. The influence of temperature on sputtering is explored and shows limited effect. Finally, the nature of implanted He, D, and T within 3C-SiC surfaces is investigated to understand implantation profiles and stability of defects.

36 MATERIALS SCIENCE↗

A dynamic stall model for analysis of cross-flow turbines using discrete vortex methods

Cross-flow turbine blades operate in an unsteady environment over large ranges of angle of attack and Reynolds number, often enduring dynamic stall. The hydrodynamics are further complicated because the circular orbit of the blades changes their effective curvature. In order to address these technical challenges with modeling cross-flow turbines, here this article presents a novel dynamic stall model with flow curvature correction. The dynamic stall model extends Beddoes-Leishman dynamic stall theory, including several effects such as proper asymptotic behavior at large (~90°) angles of attack, influence of reduced-pitch rate on the stall angle, dynamics of the flow separation point, and changes in effective camber due to flow curvature. Further, the model enables rapid hydrodynamic analysis of cross-flow turbines using free vortex methods. Important design parameters such as blade thickness and camber are explicitly accounted for in the model, which enables parametric study of turbine configurations and therefore makes the model useful for system-level turbine optimization. Numerical predictions are validated by experimental data for several cases, including ranges of blade profile, toe angle, solidity, and tip speed ratio.

16 TIDAL AND WAVE POWER↗

Autonomous reinforcement learning agent for chemical vapor deposition synthesis of quantum materials

Abstract Predictive materials synthesis is the primary bottleneck in realizing functional and quantum materials. Strategies for synthesis of promising materials are currently identified by time-consuming trial and error and there are no known predictive schemes to design synthesis parameters for materials. We use offline reinforcement learning (RL) to predict optimal synthesis schedules, i.e., a time-sequence of reaction conditions like temperatures and concentrations, for the synthesis of semiconducting monolayer MoS 2 using chemical vapor deposition. The RL agent, trained on 10,000 computational synthesis simulations, learned threshold temperatures and chemical potentials for onset of chemical reactions and predicted previously unknown synthesis schedules that produce well-sulfidized crystalline, phase-pure MoS 2 . The model can be extended to multi-task objectives such as predicting profiles for synthesis of complex structures including multi-phase heterostructures and can predict long-time behavior of reacting systems, far beyond the domain of molecular dynamics simulations, making these predictions directly relevant to experimental synthesis.

36 MATERIALS SCIENCE↗

Solvent effects on extractant conformational energetics in liquid–liquid extraction: a simulation study of molecular solvents and ionic liquids

Extractant design in liquid–liquid extraction (LLE) is a research frontier of metal ion separations that typically focuses on the direct extractant–metal interactions. However, a more detailed understanding of energetic drivers of separations beyond primary metal coordination is often lacking, including the role of solvent in the extractant phase. In this work, we propose a new mechanism for enhancing metal-complexant energetics with nanostructured solvents. Using molecular dynamics simulations with umbrella sampling, we find that the organic solvent can reshape the energetics of the extractant's intramolecular conformational landscape. Here, we calculate free energy profiles of different conformations of a representative bidentate extractant, n-octyl(phenyl)-N,N-diisobutyl carbamoyl methyl phosphinoxide (CMPO), in four different solvents: dodecane, tributyl phosphate (TBP), and dry and wet ionic liquid (IL) 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][Tf 2 N]). By promoting reorganization of the extractant molecule into its binding conformation, our findings reveal how particular solvents can ameliorate this unfavorable step of the metal separation process. In particular, the charge alternating nanodomains formed in ILs substantially reduce the free energy penalty associated with extractant reorganization. Importantly, using alchemical free energy calculations, we find that this stabilization persists even when we explicitly include the extracted cation. These findings provide insight into the energetic drivers of metal ion separations and potentially suggest a new approach to designing effective separations using a molecular-level understanding of solvent effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stretching of immersed polyelectrolyte brushes in shear flow

In this article, the way that polymer brushes respond to shear flow has important implications in various applications, including antifouling, corrosion protection, and stimuli-responsive materials. However, there is still much to learn about the behaviours and mechanisms that govern these responses. To address this gap in knowledge, our study uses in situ X-ray reflectivity to investigate how poly(styrene sulfonate) (PSS) brushes stretch and change in different environments, such as isopropanol (a poor solvent), water (a good solvent), and aqueous solutions containing various cations (Cs + , Ba 2+ , La 3+ , and Y 3+ ). We have designed a custom apparatus that exposes the PSS brushes to both tangential shear forces from the primary flow and upward drag forces from a secondary flow. Our experimental findings clearly show that shear forces have a significant impact on how the chains in PSS brushes are arranged. At low shear rates, the tangential shear force causes the chains to tilt, leading to brush contraction. In contrast, higher shear rates generate an upward shear force that stretches and expands the chains. By analysing electron density profiles obtained from X-ray reflectivity, we gain valuable insights into how the PSS brushes respond structurally, especially the role of the diffuse layer in this dynamic behaviour. Our results highlight the importance of the initial chain configuration, which is influenced by the solvent and cations present, in shaping how polymer brushes respond to shear flow. The strength of the salt bridge network also plays a crucial role in determining how easily the brushes can stretch, with stronger networks offering more resistance to stretching. Ultimately, our study aims to enhance our understanding of polymer physics at interfaces, with a particular focus on practical applications involving polymer brushes.

36 MATERIALS SCIENCE↗

A detailed study of collisionless explosion of single- and two-ion-species spherical nanoplasmas

The collisionless adiabatic expansion into vacuum of spherical plasma targets (clusters) composed of cold single- or multispecies ions and hot electrons is studied kinetically by numerical solving of the nonrelativistic equations of motion of plasma particles in the self-consistent electrostatic field. The expansion dynamics for the whole range of electron temperatures from much less than to much higher than the cluster Coulomb energy is described for various initial plasma density profiles and cluster structures. The explosion of two ion species heterogeneous (layered) and homogeneously mixed targets is studied in detail for the wide range of light ion concentration and kinematic parameter.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Vibrational modes of ultrathin carbon nanomembrane mechanical resonators

We report measurements of vibrational mode shapes of mechanical resonators made from ultrathin carbon nanomembranes (CNMs) with a thickness of approximately 1 nm. CNMs are prepared from electron irradiation induced cross-linking of aromatic self-assembled monolayers and the variation of membrane thickness and/or density can be achieved by varying the precursor molecule. Single- and triple-layer freestanding CNMs were made by transferring them onto Si substrates with square/rectangular orifices. The vibration of the membrane was actuated by applying a sinusoidal voltage to a piezoelectric disk on which the sample was glued. The vibrational mode shapes were visualized with an imaging Mirau interferometer using a stroboscopic light source. Several mode shapes of a square membrane can be readily identified and their dynamic behavior can be well described by linear response theory of a membrane with negligible bending rigidity. By applying Fourier transformations to the time-dependent surface profiles, the dispersion relation of the transverse membrane waves can be obtained and its linear behavior verifies the membrane model. By comparing the dispersion relation to an analytical model, the static stress of the membranes was determined and found to be caused by the fabrication process.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Another look at zonal flows: Resonance, shearing, and frictionless saturation

We show that shear is not the exclusive parameter that represents all aspects of flow structure effects on turbulence. Rather, wave-flow resonance enters turbulence regulation, both linearly and nonlinearly. Resonance suppresses the linear instability by wave absorption. Flow shear can weaken the resonance, and thus destabilize drift waves, in contrast to the near-universal conventional shear suppression paradigm. Furthermore, consideration of wave-flow resonance resolves the long-standing problem of how zonal flows (ZFs) saturate in the limit of weak or zero frictional drag, and also determines the ZF scale. We show that resonant vorticity mixing, which conserves potential enstrophy, enables ZF saturation in the absence of drag, and so is effective at regulating the Dimits up-shift regime. Vorticity mixing is incorporated as a nonlinear, self-regulation effect in an extended 0D predator-prey model of drift-ZF turbulence. This analysis determines the saturated ZF shear and shows that the mesoscopic ZF width scales as L ZF ~f 3/16 (1-$f$) 1/8 ρ $^{5/8}_s$ $l^{3/8}_0$in the (relevant) adiabatic limit (i.e., τ ck k$2\atop{||}$ D || $\gg$1). $f$ is the fraction of turbulence energy coupled to ZF and l 0 is the base state mixing length, absent ZF shears. We calculate and compare the stationary flow and turbulence level in frictionless, weakly frictional, and strongly frictional regimes. In the frictionless limit, the results differ significantly from conventionally quoted scalings derived for frictional regimes. To leading order, the flow is independent of turbulence intensity. The turbulence level scales as E~(γ L /ε c ) 2 , which indicates the extent of the “near-marginal” regime to be γ L <ε c , for the case of avalanche-induced profile variability. Here, ε c is the rate of dissipation of potential enstrophy and γ L is the characteristic linear growth rate of fluctuations. The implications for dynamics near marginality of the strong scaling of saturated E with γ L are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NEW LIMITS ON AN INTERMEDIATE-MASS BLACK HOLE IN OMEGA CENTAURI. II. DYNAMICAL MODELS

We present a detailed dynamical analysis of the projected density and kinematical data available for the globular cluster omega Centauri. We solve the spherical anisotropic Jeans equation for a given density profile to predict the projected profiles of the rms velocity sigma-bar(R), in each of the three orthogonal coordinate directions (line of sight, proper motion radial, and proper motion tangential). The models allow for the presence of a central dark mass, such as a possible intermediate-mass black hole (IMBH). We fit the models to new Hubble Space Telescope star count and proper motion data near the cluster center presented in the companion paper, which is Paper I in this series, combined with existing ground-based measurements at larger radii. The projected density profile is consistent with being flat near the center, with an upper limit gamma {approx}< 0.07 on the central logarithmic slope. The rms proper motion profile is also consistent with being flat near the center. The velocity anisotropy profile, distance, and stellar mass-to-light ratio are all tightly constrained by the data and found to be in good agreement with previous determinations by van de Ven et al. To fit the kinematics, we consider anisotropic models with either a flat core (gamma = 0) or a shallow cusp (gamma = 0.05). Core models provide a good fit to the data with M{sub BH} = 0; cusp models require a dark mass. If the dark mass in cusp models is an IMBH, then M{sub BH} = (8.7 +- 2.9) x 10{sup 3} M{sub sun}; if it is a dark cluster, then its extent must be {approx}<0.16 pc. Isotropic models do not fit the observed proper motion anisotropy and yield spuriously high values for any central dark mass. These models do provide a good fit to the Gauss-Hermite moments of the observed proper motion distributions (h{sub 4} = -0.023 +- 0.004, h{sub 6} = 0.001 +- 0.004). There are no unusually fast-moving stars observed in the wings of the proper motion distribution, but we show that this does not strongly constrain the mass of any possible IMBH. The overall end result of the modeling is an upper limit to the mass of any possible IMBH in omega Centauri: M{sub BH} {approx}< 1.2 x 10{sup 4} M{sub sun} at {approx}1sigma confidence (or {approx}<1.8 x 10{sup 4} M{sub sun} at {approx}3sigma confidence). The 1sigma limit corresponds to M{sub BH}/M{sub tot} {approx}< 0.43%. We combine this with results for other clusters and discuss the implications for globular cluster IMBH demographics. Tighter limits will be needed to rule out or establish whether globular clusters follow the same black hole demographics correlations as galaxies. The arguments put forward by Noyola et al. to suspect an IMBH in omega Centauri are not confirmed by our study; the value of M{sub BH} they suggested is firmly ruled out.

79 ASTRONOMY AND ASTROPHYSICS↗

Implications of asymmetric beam geometry for convergent acoustic Doppler profilers

The focus of this research is to develop a measurement instrument to characterize complex flows at spatial and temporal resolutions pertinent to understanding hydrodynamic loads in zones of fluid-structure interaction. Foundational work has demonstrated that flow velocities can be measured at a fixed focal point using a convergent array of acoustic Doppler profiling (C-ADP) instruments. As an extension of this concept, the following approach describes an application of the technology to facilitate 3D velocity measurements at a dynamically adjustable focal point location. Furthermore, the ability to dynamically control the focal point location in real-time allows the instrument to survey velocities within a three-dimensional velocity field. The resulting configuration targets a combination of measurement fidelity and control that has not been achieved by existing remote flow measurement instrumentation in the marine environment.

Harding, Samuel F.↗

Exploring the Effects of Piston Bowl Geometry and Injector Included Angle on Dual-Fuel and Single-Fuel RCCI

Abstract Reactivity control compression ignition (RCCI) is a low-temperature combustion technique that has been proposed to meet the current demand for high thermal efficiency and low engine-out emissions. However, its requirement of two separate fuel systems (i.e., a low-reactivity fuel system and a high-reactivity fuel system) has been one of its major challenges in the last decade. This leads to the single-fuel RCCI concept, where the secondary fuel (reformates of diesel) is generated from the primary fuel (diesel) through catalytic partial oxidation reformation. Following the in-depth analysis of the reformate fuel (reformates of diesel) and its benefit as the low-reactivity fuel with diesel, the effects of the start of injection (SOI) timing of diesel and the energy-based blend ratio were also studied in detail. In this study, the effects of piston profile and the injector included angles were experimentally examined using both conventional fuel pairs (gasoline—diesel and natural gas—diesel) and reformate RCCI. A validated computational fluid dynamics (CFD) model was also used for a better understanding of the experimental trends. Comparing a reentrant bowl piston with a shallow bowl piston at a constant compression ratio and SOI, the latter showed better thermal efficiency, regardless of the fuel combination, due to its 10% lower surface area for the heat transfer. Comparing the 150-degree included angle and 60-degree included angle on the shallow bowl piston, the latter showed better combustion efficiency, regardless of the fuel combination, due to its earlier combustion phasing (at constant SOI timing). The effect was particularly prominent on reformate RCCI because of its incredibly high diluent concentration, which retards the combustion further for the 150-deg injector. Later, using convergecfd, seven different injector included angles were studied at a constant SOI. With the change in injector included angle, the region of the cylinder targeted by the fuel spray varies significantly, and it was found to have a significant impact on the combustion efficiency and the engine-out emissions. As the injector included angle changed from 60-deg to 150-deg, the combustion efficiency increased by 15% and the CO, NOx, and HC emissions decreased by 96%, 70%, and 86%, respectively.

Engineering↗

MO-FG-202-03: Efficient Data Collection of Continuous 2D and Discrete Relative Dosimetric Data for Annual LINAC QA Using TrueBeam Developer Mode and a 1D Scanning Tank

Purpose: To develop a method to exploit real-time dynamic machine and couch parameter control during linear accelerator (LINAC) beam delivery to facilitate efficient performance of TG-142 suggested, Annual LINAC QA tests. Methods: Varian’s TrueBeam Developer Mode (Varian Medical Systems, Palo Alto, CA) facilitates control of Varian’s TrueBeam LINAC via instructions provided in Extensible Markup Language (XML) files. This allows machine and couch parameters to be varied dynamically, in real-time, during beam delivery. Custom XML files were created to allow for the collection of (1) continuous Tissue Maximum Ratios (TMRs), (2) beam profiles, and (3) continuous output factors using a 1D-scanning tank. TMRs were acquired by orienting an ionization chamber (IC) at isocenter (depth=25cm) and synchronizing a depth scan towards the water surface while lowering the couch at 1mm/s. For beam profiles, the couch was driven laterally and longitudinally while logging IC electrometer readings. Output factors (OFs) where collected by continually varying field sizes (4×4 to 30×30-cm{sup 2}) at a constant speed of 6.66 mm/s. To validate measurements, comparisons were made to data collected using traditional methods (e.g. 1D or 3D tank). Results: All data collecting using the proposed methods agreed with traditionally collected data (TMRs within 1%, OFs within 0.5% and beam profile agreement within 1% / 1mm) while taking less time to collect (factor of approximately 1/10) and with a finer sample resolution. Conclusion: TrueBeam developer mode facilitates collection of continuous data with the same accuracy as traditionally collected data with a finer resolution in less time. Results demonstrate an order of magnitude increase in sampled resolution and an order of magnitude reduction in collection time compared to traditional acquisition methods (e.g. 3D scanning tank). We are currently extending this approach to perform other TG-142 tasks.

61 RADIATION PROTECTION AND DOSIMETRY↗

Predictive features of ligand-specific signaling through the estrogen receptor

Some estrogen receptor-α (ERα)-targeted breast cancer therapies such as tamoxifen have tissue-selective or cell-specific activities, while others have similar activities in different cell types. To identify biophysical determinants of cell-specific signaling and breast cancer cell proliferation, we synthesized 241 ERα ligands based on 19 chemical scaffolds, and compared ligand response using quantitative bioassays for canonical ERα activities and X-ray crystallography. Ligands that regulate the dynamics and stability of the coactivator-binding site in the C-terminal ligand-binding domain, called activation function-2 (AF-2), showed similar activity profiles in different cell types. Such ligands induced breast cancer cell proliferation in a manner that was predicted by the canonical recruitment of the coactivators NCOA1/2/3 and induction of the GREB1 proliferative gene. For some ligand series, a single inter-atomic distance in the ligand-binding domain predicted their proliferative effects. In contrast, the N-terminal coactivator-binding site, activation function-1 (AF-1), determined cell-specific signaling induced by ligands that used alternate mechanisms to control cell proliferation. Thus, incorporating systems structural analyses with quantitative chemical biology reveals how ligands can achieve distinct allosteric signaling outcomes through ERα.

59 BASIC BIOLOGICAL SCIENCES↗

(U) Pre-shot Report: Complex Loading of CeO 2 Powder

A cylindrically converging shock compaction experiment is designed utilizing the Precision High Energy-density Liner Implosion eXperiment (PHELIX) platform to dynamically load CeO 2 powder. Parametric analyses investigating the effect of PHELIX cassette geometry, PHELIX total capacitor charge, and powder compaction model on the predicted shocked density profile of the CeO 2 powder are performed using the LANL codes FLAG and RAVEN. One PHELIX cassette geometry is designed to be used in two compaction experiments using PHELIX capacitor charges of 85 and 90 kV. Predictions of the shocked density profile in the CeO 2 powder are presented for each experimental configuration using both the Ramp and P-α compaction models. The two compaction models predict shocked density profiles in the CeO 2 powder that are significantly different and should be distinguishable using proton radiography as a diagnostic.

36 MATERIALS SCIENCE↗

An Urban Climate Archipelago in the Southeastern U.S.

Urban boundary layers (UBLs; Barlow, 2014) are the most populous microclimate in the world but are still a challenge to represent physically due to the lack of frequent observations within most urban centers. We examine a set of inland urban regions of different sizes within the Southeast U.S.: Atlanta, GA; Athens, GA; Augusta, GA; and Columbia, SC. We compare Weather Research and Forecasting (WRF; Skamarock et al., 2019) simulation output of Atlanta to hourly-averaged Aircraft Meteorological Data Relay (AMDAR) temperature profiles within the warm season in the ATL airport. The scaling of the simulated UBL by size of the urban region is assessed by comparing the UBL dynamics of the three smaller cities (Athens, Augusta, and Columbia) to Atlanta.

Wermter, Jospeh↗

Development of a Couette-Taylor flow device with active minimization of secondary circulation

A novel Taylor-Couette experiment has been developed to produce rotating shear ows for the study of hydrodynamic and magnetohydrodynamic instabilities which are believed to drive angular momentum transport in astrophysical accretion disks. High speed, concentric, corotating cylinders generate the flow where the height of the cylinders is twice the radial gap width. Ekman pumping is controlled and minimized by splitting the vertical boundaries into pairs of nested, differentially rotating rings. The end rings and cylinders comprise four independently driven rotating components which provide exibility in developing flow profiles. The working fluids of the experiment are water, a water-glycerol mix, or a liquid gallium alloy. The mechanical complexity of the apparatus and large dynamic pressures generated by high speed operation with the gallium alloy presented unique challenges. The mechanical implementation of the experiment and some representative results obtained with Laser Doppler Velocimetry in water are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

FINDING THE CENTER: AN ANALYSIS OF THE TILTED RING MODEL FITS TO THE INNER AND OUTER PARTS OF SIX DWARF GALAXIES

We present a study of the H i emission of six dwarf galaxies. Profiles of dark matter halos of galaxies such as these have been the subject of much debate. In this paper we investigate the accuracy with which the dynamical center (the center of rotation) of each galaxy can be determined. We have used the tilted ring model. We find that the tilted ring method produces plausible centers that are consistent with other published works that used rings at radii larger than 1 kpc. At a radius of 1 kpc the method often converges on centers that do not make sense, producing, for example, radial velocities for the galaxies that are inconsistent with the data. The only way to get the method to work in the centers of galaxies is to use prior information about the redshifts to rule out implausible centers. This suggests that the tilted ring ring method may not be producing reliable rotational velocities in the central kiloparsecs of dwarf galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

MOLECULAR LINES OF 13 GALACTIC INFRARED BUBBLE REGIONS

We investigated the physical properties of molecular clouds and star formation (SF) processes around infrared bubbles, which are essentially expanding H ii regions. We performed observations of 13 galactic infrared bubble fields containing 18 bubbles. We observed five molecular lines—{sup 12}CO (J=1→0), {sup 13}CO (J=1→0), C{sup 18}O (J=1→0), HCN (J=1→0), and HCO{sup +} (J=1→0)—and several publicly available surveys were used for comparison: Galactic Legacy Infrared Mid-Plane Survey Extraordinaire, Multiband Imaging Photometer for Spitzer Galactic Plane Survey, APEX Telescope Large Area Survey of the Galaxy, Bolocam Galactic Plane Survey, Very Large Array (VLA) Galactic Plane Survey, Multi-Array Galactic Plane Imaging Survey, and NRAO VLA Sky Survey. We find that these bubbles are generally connected with molecular clouds, most of which are giant. Several bubble regions display velocity gradients and broad-shifted profiles, which could be due to the expansion of bubbles. The masses of molecular clouds within bubbles range from 100 to 19,000 M {sub ⊙}, and their dynamic ages are about 0.3–3.7 Myr, which takes into account the internal turbulence pressure of surrounding molecular clouds. Clumps are found in the vicinity of all 18 bubbles, and molecular clouds near four of these bubbles with larger angular sizes show shell-like morphologies, indicating that either collect-and-collapse or radiation-driven implosion processes may have occurred. Due to the contamination of adjacent molecular clouds, only six bubble regions are appropriate to search for outflows, and we find that four have outflow activities. Three bubbles display ultra-compact H ii regions at their borders, and one is probably responsible for its outflow. In total, only six bubbles show SF activities in the vicinity, and we suggest that SF processes might have been triggered.

79 ASTRONOMY AND ASTROPHYSICS↗