Search NASA⌕ Search

SEARCH · Search NASA

Results for “FERROMAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Effects of Ag Doping and Point Defect on the Magnetism of ZnO

The magnetism sources and magnetic mechanism of Ag doping and point defect, which coexist in the presence of ZnO, are frequently controversial. To solve these problems, the effects of Ag doping and Zn or O vacancy on the magnetism of ZnO were investigated using geometry optimization and energy calculation according to the first-principles generalized gradient approximation + U (GGA+U) method of density functional theory. Results revealed that the system which Ag doping and Zn vacancy coexists in ZnO could achieve room-temperature ferromagnetism. This system had an extremely high spin polarization, which was advantageous for the spin electron injection sources applied in dilute magnetic semiconductors. Result also revealed that the magnetism of Zn{sub 14}AgO{sub 16} was caused by the electron hybrid coupling effects among the O-2p, Ag-4d, Ag-5s, and Zn-4s orbits. And these effects were produced by the hole carriers after complexes were formed by the Ag doping and Zn vacancy. With regard to the most stable structure of the ground state, all doping systems which Ag replacing Zn and O vacancy coexisted in ZnO and those which Ag replacing Zn, interstitial Ag, and O vacancy coexisted in ZnO were all non-magnetic. Thus, these doping systems were unsuitable for dilute magnetic semiconductors. By contrast, the doping systems of interstitial Ag and Zn vacancy were magnetic, although the magnetism was relatively weak, thus rendering such systems inapplicable as well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultrafast optical control of surface and bulk magnetism in magnetic topological insulator/antiferromagnet heterostructure

Abstract Optical control of the magnetic properties in topological insulator systems is an important step in applying these materials in ultrafast optoelectronic and spintronic schemes. In this work, we report the experimental observation of photo-induced magnetization dynamics in the magnetically doped topological insulator (MTI)/antiferromagnet (AFM) heterostructure composed of Cr-(Bi,Sb) 2 Te 3 /CrSb. Through proximity coupling to the AFM layer, the MTI displays a dramatically enhanced magnetism, with robust perpendicular magnetic anisotropy. When subjected to intense laser irradiation, both surface and bulk magnetism of the MTI are weakened by laser-induced heating of the lattice, however, at the surface, the deleterious heat effect is compensated by the strengthening of Dirac-hole-mediated exchange coupling as demonstrated by an unconventional pump-fluence-dependent exchange-bias effect. Through theoretical analyses, the sizes of exchange coupling energies are estimated in the MTI/AFM bilayer structure. The fundamentally different mechanisms supporting the surface and bulk magnetic order in MTIs allow a novel and distinctive photo-induced transient magnetic state with antiparallel spin configuration, which broadens the understanding of the magnetization dynamics of MTIs under ultrashort and intense optical excitation.

42 ENGINEERING↗

Room‐Temperature Ferromagnetism in MoTe 2 by Post‐Growth Incorporation of Vanadium Impurities

Abstract Post‐synthesis doping of 2D materials is demonstrated by incorporation of vapor‐deposited transition metals into a MoTe 2 lattice. Using this approach, vanadium doping of 2H‐MoTe 2 produces a 2D ferromagnetic semiconductor with a Curie temperature above room temperature (RT). Surprisingly, ferromagnetic properties can be induced with very low vanadium concentrations, down to ≈0.2%. The vanadium species introduced at RT are metastable, and annealing to above ≈500 K results in the formation of a thermodynamically favored impurity configuration that, however, exhibits reduced ferromagnetic properties. Doping with titanium, instead of vanadium, shows a similar incorporation behavior, but no ferromagnetism is induced in MoTe 2 . This indicates that the type of impurities in addition to their atomic configuration is responsible for the induced magnetism. The interpretation of the experimental results is consistent with ab initio calculations, which confirm that the proposed vanadium impurity configurations exhibit magnetic moments, in contrast to the same configurations with titanium impurities. This study illustrates the possibility to induce ferromagnetic properties in layered van der Waals semiconductors by controlled magnetic impurity doping and thus to add magnetic functionalities to 2D materials.

Coelho, Paula Mariel↗

Electronic Structure of Buried Interfaces - Oral Presentation [Slides]

In the electronics behind computer memory storage, the speed and size are dictated by the performance of permanent magnets inside devices called read heads. Complicated magnets made of stacked layers of thin films can be engineered to have properties that yield more energy storage and faster switching times compared to conventional iron or cobalt magnets. The reason is that magnetism is a result of subtle interactions amongst electrons; just how neurons come together on large scales to make cat brains and dog brains, ensembles of electrons interact and become ferromagnets and paramagnets. These interactions make magnets too difficult to study in their entirety, so I focus on the interfaces between layers, which are responsible for the coupling materials physicists hope to exploit to produce next-generation magnets. This project, I study a transition metal oxide material called LSCO, Lanthanum Cobaltite, which can be a paramagnet or a ferromagnet depending on how you tweak the electronic structure. It exhibits an exciting behavior: its sum is greater than the sum of its parts. When another similar material called a LSMO, Lanthanum Manganite, is grown on top of it, their interface has a different type of magnetism from the LSCO or the LSMO! I hope to explain this by demonstrating differently charged ions in the interface. The typical method for quantifying this is x-ray absorption, but all conventional techniques look at every layer simultaneously, averaging the interfaces and the LSCO layers that we want to characterize separately. Instead, I must use a new reflectivity technique, which tracks the intensity of reflected x-rays at different angles, at energies near the absorption peaks of certain elements, to track changes in the electronic structure of the material. The samples were grown by collaborators at the Takamura group at U.C. Davis and probed with this “resonant reflectivity” technique on Beamline 2-1 at the Stanford Synchrotron Radiation Lightsource. This project was funded by the Department of Energy and supported by the SLAC National Accelerator Laboratory. Preliminary results suggest that different ionic charges are indeed responsible for the different magnetic properties at the interface, which is promising because charge is easy to control. Once scientists understand how to tune the magnetic properties of materials like LSCO and LSMO, industries get closer to designing the magnets that will soon revolutionize consumer electronics.

36 MATERIALS SCIENCE↗

Spin-wave resonance in Ge{sub 1-x}Mn{sub x} films exhibiting percolation ferromagnetism

Magnetic properties of Ge{sub 1-x}Mn{sub x} (x = 0.02, 0.04, 0.08) thin films obtained by ion-implanting Mn{sup +} ions into single-crystal Ge plates are investigated. The contributions of the subsystem of dispersed Mn{sup 2+} ions, Ge{sup 3}Mn{sup 5} ferromagnetic clusters, and Mn-enriched ferromagnetic domains of Ge to the magnetic moment of Ge{sub 1-x}Mn{sub x} films are distinguished. In the subsystem of dispersed Mn{sup 2+} ions in Ge{sub 1-x}Mn{sub x} films at temperatures below 10 K, a spin-wave resonance is observed in the magnetically ordered state due to percolation ferromagnetism. It is established that, in the films with percolation ferromagnetism, the exchange integrals determined from static measurements correspond to those determined by dynamic measurements.

36 MATERIALS SCIENCE↗

Universal Conductance Fluctuations in a MnBi 2 Te 4 Thin Film

Quantum coherence of electrons can produce striking behaviors in mesoscopic conductors, including weak localization and the Aharonov-Bohm effect. Although magnetic order can also strongly affect transport, the combination of coherence and magnetic order has been largely unexplored. Here, we examine quantum coherence-driven universal conductance fluctuations in the antiferromagnetic, canted antiferromagnetic, and ferromagnetic phases of a thin film of the topological material MnBi 2 Te 4 . In each magnetic phase we extract a charge carrier phase coherence length of about 100 nm. The conductance magnetofingerprint is repeatable when sweeping applied magnetic field within one magnetic phase, but changes when the applied magnetic field crosses the antiferromagnetic/canted antiferromagnetic magnetic phase boundary. Surprisingly, in the antiferromagnetic and canted antiferromagnetic phase, but not in the ferromagnetic phase, the magnetofingerprint depends on the direction of the field sweep. Finally, to explain these observations, we suggest that conductance fluctuation measurements are sensitive to the motion and nucleation of magnetic domain walls in MnBi 2 Te 4 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Altermagnetism in the layered intercalated transition metal dichalcogenide CoNb 4 Se 8

Altermagnets (AMs) are a new class of magnetic materials that combine the beneficial spintronics properties of ferromagnets and antiferromagnets, garnering significant attention recently. Here, we have identified altermagnetism in a layered intercalated transition metal diselenide, CoNb 4 Se 8 , which crystallizes with an ordered sublattice of intercalated Co atoms between NbSe 2 layers. Single crystals are synthesized, and the structural characterizations are performed using single crystal diffraction and scanning tunneling microscopy. Magnetic measurements reveal easy-axis antiferromagnetism below 168 K. Density functional theory (DFT) calculations indicate that A-type antiferromagnetic ordering with easy-axis spin direction is the ground state, which is verified through single crystal neutron diffraction experiments. Electronic band structure calculations in this magnetic state display spin-split bands, confirming altermagnetism in this compound. The layered structure of CoNb 4 Se 8 presents a promising platform for testing various predicted properties associated with altermagnetism.

36 MATERIALS SCIENCE↗

Spin pumping and inverse spin Hall effects—Insights for future spin-orbitronics (invited)

Quantification of spin-charge interconversion has become increasingly important in the fast-developing field of spin-orbitronics. Pure spin current generated by spin pumping acts as a sensitive probe for many bulk and interface spin-orbit effects, which has been indispensable for the discovery of many promising new spin-orbit materials. We apply spin pumping and inverse spin Hall effect experiments, as a useful metrology, and study spin-orbit effects in a variety of metals and metal interfaces. We quantify the spin Hall effects in Ir and W using the conventional bilayer structures and discuss the self-induced voltage in a single layer of ferromagnetic permalloy. Finally, we extend our discussions to multilayer structures and quantitatively reveal the spin current flow in two consecutive normal metal layers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Theoretical Design of Robust Ferromagnetism and Bipolar Semiconductivity in Graphene-Based Nanoroads

The search for graphene-based materials for spintronics applications has intensified in recent years, and numerous designs have been proposed based on various modifications to pristine graphene. Despite the tremendous progress made in the past, finding a design that can be realized in practice remains a challenging task. Encouraged by recent experimental breakthroughs, here we propose a feasible scheme to realize graphene-based magnetic nanoroads. This new material consists of a half-hydrogenated graphene nanoroad embedded in a fully hydrogenated graphene sheet. Using first-principles density functional theory calculations, we demonstrate that such a design can convert nonmagnetic pristine graphene into a bipolar ferromagnetic semiconductor. More importantly, as a result of areal magnetization enabled by half-hydrogenation, the overall magnetism of such a nanoroad is very robust against a variation of either its width or orientation. We also propose a simple design of an all-electric controlled device based on the new material for the generation and regulation of a fully spin-polarized electric current.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and magnetic properties of self assembled Fe-doped Cu{sub 2}O nanorods

Cuprous oxide (Cu{sub 2}O) nanorods doped with iron impurities have been synthesized by the polyol method using sodium dodecyl sulfate as the surfactant. The X-ray diffraction measurement reveals the pure phase of simple cubic Cu{sub 2}O and the electron microscopy displays its one dimensional morphology. Ferromagnetism was observed at room temperature in the magnetic measurements of the doped samples while undoped sample exhibits only diamagnetism. Room temperature Moessbauer spectra for the samples exhibited only doublets but no sextet, which corresponds to the presence of paramagnetic iron sites. As magnetic moment contribution of the doped ions was insignificant for the observed magnetism, ferromagnetic property in the doped samples could have been originated from the defects as cation vacancies. Existence of the defects was supported by the room temperature photoluminescence spectra of the doped samples in reference to the undoped sample. - Ferromagnetism at room temperature was observed in the Fe doped Cu{sub 2}O nanorods. The origin seems to be the defects of cation vacancies created by the dopant ions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Tunable Magnetic and Optical Anisotropy in ZrO 2 ‐Co Vertically Aligned Nanocomposites

Abstract Metamaterials have gained great research interest in recent years owing to their potential for property tunability, multifunctionality, and property coupling. As a new group of self‐assembled thin films, vertically aligned nanocomposite (VAN)‐based hybrid metamaterials have been demonstrated with significant anisotropic physical properties and a broad range of property tailorability, such as optical anisotropy, magnetic anisotropy, hyperbolic dispersion, and enhanced second harmonic generation properties. Herein, self‐assembled ZrO 2 ‐Co nanocomposite films, with high epitaxial quality and ultra‐fine vertically aligned Co nanopillars (with an average diameter of ≈2 nm) embedded in a ZrO 2 matrix, are fabricated using a pulsed laser deposition (PLD) method. The Co pillar density can be effectively tuned by varying the Co concentration in the target, which results in tunable optical properties and magnetic properties. Specifically, a high saturation magnetization of 100 emu cm −3 , strong out‐of‐plane magnetic anisotropy and tailorable magnetization properties are achieved via tuning the Co nanopillar density. Coupled with hyperbolic dispersion of dielectric constant from 950 to 1500 nm in wavelength, plasmonic Co metal nanopillars, and the unique dielectric ZrO 2 matrix, this new nanoscale hybrid metamaterial shows great potential for future integrated optical and magnetic device designs.

36 MATERIALS SCIENCE↗

Modeling the Magnetocaloric Effect of La{sub 0.67}Pb{sub 0.33}MnO{sub 3} by the Mean-Field Theory

In this paper, a theoretical analysis linked to the molecular field theory and the Bean-Rodbell model has investigated the magnetocaloric effect (MCE) in a La{sub 0.67}Pb{sub 0.33}MnO{sub 3} sample. We have demonstrated how the mean-field model can adequately simulate the magnetic and magnetocaloric properties of this magnetic system, which may be a candidate material to magnetic refrigerants. The second-order ferromagnetic (FM)-paramagnetic (PM) phase transition has been confirmed. The expressions describing the entropy and its change under the influence of the magnetic field have been derived. A scaling method based on the mean-field theory leads to a direct calculation of the exchange parameter (λ), the saturation magnetization (M{sub 0}), the total angular momentum (J), and the gyromagnetic factor (g) of our sample. These constants were used to simulate M(H,T) isotherms, which are used again for the determination of the magnetic entropy change (−ΔS{sub M}) of La{sub 0.67}Pb{sub 0.33}MnO{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of Electronic, Magnetic, Thermodynamic, and Thermoelectric Properties of Half-Metallic XLiSn (X = Ce, Nd) Alloys

We have investigated the electronic, magnetic, thermodynamic, and thermoelectric properties of half-Heusler CeLiSn and NdLiSn using density functional theory. The materials crystallize in F 4-bar 3mstructure with ferromagnetic state at optimized lattice parameter of 6.73 Å for CeLiSn and 6.74 Å for NdLiSn. The modified Becke-Johnson potential (mBJ) and generalized gradient approximation (GGA) have been used for computation of band structure, where mBJ shows a perfect half-metallic nature of the bands in both the alloys. The calculated magnetic moment of 1.0 μ{sub B} for CeLiSn and 3.0 μ{sub B} for NdLiSn follow Slater-Pauling rule, with ferromagnetic interactions. The temperature variation of the Seebeck coefficient shows the p-type behavior with room temperature values of 27 μV/K (43 μV/K) for CeLiSn (NdLiSn). Pressure-dependent variation of specific heat, Debye temperature, and Gruneisen parameter were calculated to infer the nature of lattice vibration and stability at high pressures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Controlling the extent of atomic ordering in intermetallic alloys through additive manufacturing

Control of the atomic structure, as measured by the extent of the embrittling B2 chemically ordered phase, is demonstrated in intermetallic alloys through additive manufacturing (AM) and characterized using high fidelity neutron diffraction. As a layer-by-layer rapid solidification process, AM was employed to suppress the extent of chemically ordered B2 phases in a soft ferromagnetic Fe-Co alloy, as a model material system of interest to electromagnetic applications. The extent of atomic ordering was found to be insensitive to the spatial location within specimens and insinuates that the thermal conditions within only a few AM layers were most influential in controlling the microstructure, in agreement with the predictions from a thermal model for welding. Analysis of process parameter effects on ordering found that suppression of B2 phase was the result of an increased average cooling rate during processing. AM processing parameters, namely interlayer interval time and build velocity, were used to systematically control the relative fraction of ordered B2 phase in specimens from 0.49 to 0.72. Hardness of AM specimens was more than 150% higher than conventionally processed bulk material. Implications for tailoring microstructures of intermetallic alloys are discussed.

36 MATERIALS SCIENCE↗

Fabrication and characterization of electrospun single-crystal lead manganese borate nanofibers

Highlights: • Single crystal PbMnBO4 nanofibers were successfully fabricated by electrospinning process. • The PbMnBO4 nanofibers synthesized for the first time and unprecedented in the literature. • Characterization of PbMnBO{sub 4} nanofibers in mineralogical, optical and thermal properties was revealed. • The nanofibers exhibit single crystalline features with an average size between 120 and 250 nm. • These nanofibers can be used in optic or photonic fields as a flexible sensor due to its nonlinear and ferromagnetic properties. - Abstract: Anhydrous borate compounds are important materials in optical applications as nonlinear optical materials (NLO), due to the presence of structural B{sub x}O{sub y} subunits. Herein, lead manganese borate (PbMnBO{sub 4}) nanofibers have been firstly fabricated via a facile approach using a simple and inexpensive electrospinning technique. All of the synthesized samples were analyzed with X-Ray Diffractometer (XRD), Transmission Electron Microscope (TEM), Scanning Electron Microscope (SEM), Fourier Transform Infrared (FTIR), and Ultraviolet-visible Spectroscopy (UV–vis) method. In addition, they were thermally analyzed with Thermal Gravimetric and Differential Thermal Analyzer and TG-DTA diagrams were discussed in detail. All of the characterization results showed that the obtained PbMnBO{sub 4} nanostructures have nanofiber structures and good crystalline features. PbMnBO{sub 4} nanofiber synthesized for the first time and unprecedented in the literature is promising absorber materials for nonlinear optic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical Detection of Spin-Hall-Induced Auto-oscillations in Lithium Aluminate Ferrite Thin Films

Ferrimagnetic insulators with ultralow damping are of great interest for their potential applications in energy-efficient computing devices. Here, we report the direct electrical detection of magnetic auto-oscillations in unpatterned ultralow damping ferrimagnetic insulator epitaxial Li 0.5 Al 0.5 Fe 2 O 4 thin films, driven by a current in a proximal Pt nanowire. Auto-oscillations occur for only one current polarity, consistent with the spin-Hall effect inducing the oscillation state. Micromagnetic modeling shows good agreement with the experimental frequency and field dispersions, showing only one dominant oscillation mode, in contrast to the multiple modes typically observed in transition-metal nanowire-type spin-Hall nanooscillators. This study illustrates a new material system for neuromorphic computing and magnonics, a simple material platform with the direct-current generation of high-frequency (~10 GHz) signals and their electrical detection.

36 MATERIALS SCIENCE↗

Tuning Magnetic Soliton Phase via Dimensional Confinement in Exfoliated 2D Cr 1/3 NbS 2 Thin Flakes

Thin flakes of Cr 1/3 NbS 2 are fabricated successfully via microexfoliation techniques. Temperature-dependent and field-dependent magnetizations of thin flakes with various thicknesses are investigated. When the thickness of the flake is around several hundred nanometers, the softening and eventual disappearance of the bulk soliton peak is accompanied by the appearance of other magnetic peaks at lower magnetic fields. The emergence and annihilation of the soliton peaks are explained and simulated theoretically by the change in spin spiral number inside the soliton lattice due to dimensional confinement. Compared to the conventional magnetic states in nanoscale materials, the stability and thickness tunability of quantified spin spirals make Cr 1/3 NbS 2 a potential candidate for spintronics nanodevices beyond Moore’s law.

2D materials↗

Giant Topological Hall Effect in van der Waals Heterostructures of CrTe 2 /Bi 2 Te 3

Discoveries of the interfacial topological Hall effect (THE) provide an ideal platform for exploring the physics arising from the interplay between topology and magnetism. The interfacial topological Hall effect is closely related to the Dzyaloshinskii-Moriya interaction (DMI) at an interface and topological spin textures. However, it is difficult to achieve a sizable THE in heterostructures due to the stringent constraints on the constituents of THE heterostructures, such as strong spin-orbit coupling (SOC). Here, we report the observation of a giant THE signal of 1.39 mu Omega.cm in the van der Waals heterostructures of CrTe 2 /Bi 2 Te 3 fabricated by molecular beam epitaxy, a prototype of two-dimensional (2D) ferromagnet (FM)/topological insulator (TI). This large magnitude of THE is attributed to an optimized combination of 2D ferromagnetism in CrTe 2 , strong SOC in Bi 2 Te 3 , and an atomically sharp interface. Furthermore, our work reveals CrTe 2 /Bi 2 Te 3 as a convenient platform for achieving large interfacial THE in hybrid systems, which could be utilized to develop quantum science and high-density information storage devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗