Search NASA⌕ Search

SEARCH · Search NASA

Results for “LEVELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Energy levels and radiative rates for transitions in Ga XXIV

Energy levels, transition probabilities, oscillator strengths, line strengths, and lifetimes have been calculated for Oxygen-like Gallium, Ga XXIV. The configurations 2s{sup 2}2p{sup 4}, 2s2p{sup 5}, 2p{sup 6}, 2s2p{sup 4}3 Script-Small-L , 2s{sup 2}2p{sup 3}3 Script-Small-L , and 2p{sup 5}3 Script-Small-L were used in calculations and 226 fine-structure levels were obtained. The fully relativistic GRASP code has been adopted, and results are reported for all electric dipole (E1), electric quadrupole (E2), magnetic dipole (M1), and magnetic quadrupole (M2) transitions among the lowest 226 levels of Ga XXIV, belonging to the n{<=}3 configurations. Comparisons have been made with earlier available theoretical and experimental results.

74 ATOMIC AND MOLECULAR PHYSICS↗

Energy levels, lifetimes, and transition probabilities for Mn XII and Ge XIX

Energy levels, transition probabilities, oscillator strengths, line strengths, and lifetimes have been calculated for silicon-like manganese and germanium, Mn XII and Ge XIX. The configurations 3s{sup 2}3p{sup 2}, 3s3p{sup 3}, 3s{sup 2}3p3d, 3s3p{sup 2}3d, and 3p{sup 4} were used in the calculations and 88 fine-structure levels were obtained. The fully relativistic GRASP code has been adopted, and results are reported for all electric dipole, electric quadrupole, magnetic dipole, and magnetic quadrupole transitions among levels of Mn XII and Ge XIX. Comparisons have been made with available theoretical and experimental results.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Energy levels and radiative rates for transitions in Cr-like Co IV and Ni V

We report calculations of energy levels and radiative rates (A-values) for transitions in Cr-like Co IV and Ni V. The quasi-relativistic Hartree–Fock (QRHF) code is adopted for calculating the data although grasp (general-purpose relativistic atomic structure package) and flexible atomic code (fac) have also been employed for comparison purposes. No radiative rates are available in the literature to compare with our results, but our calculated energies are in close agreement with those compiled by NIST for a majority of the levels. However, there are discrepancies for a few levels of up to 3%. The A-values are listed for all significantly contributing E1, E2 and M1 transitions, and the corresponding lifetimes reported, although unfortunately no previous theoretical or experimental results exist to compare with our data.

74 ATOMIC AND MOLECULAR PHYSICS↗

Energy levels and radiative rates for Cr-like Cu VI and Zn VII

Energy levels and radiative rates (A-values) for transitions in Cr-like Cu VI and Zn VII are reported. These data are determined in the quasi-relativistic approach (QR), by employing a very large configuration interaction (CI) expansion which is highly important for these ions. No radiative rates are available in the literature to compare with our results, but our calculated energies are in close agreement with those compiled by NIST and other available theoretical data, for a majority of the levels. The A-values (and resultant lifetimes) are listed for all significantly contributing E1, E2 and M1 radiative transitions among the energetically lowest 322 levels of each ion.

74 ATOMIC AND MOLECULAR PHYSICS↗

Energy levels, radiative transitions and Auger transitions of the core excited states for B-like ions

Highlights: • Core excited states from 1s2s{sup 2}2p{sup 2} and 1s2s2p{sup 3} for B-like systems are studied. • Energy levels, radiative transitions and Auger transitions are calculated. • Radiative and Auger rates are discussed with nuclear charge numbers. - Abstract: Energy levels, radiative transitions and Auger transitions of the core excited states from 1s2s{sup 2}2p{sup 2} and 1s2s2p{sup 3 2,4} L (L=S,P,D) configurations for B-like systems including P{sup 10+}, Ca{sup 15+}, Mn{sup 20+}, and Zn{sup 25+} ions are calculated using the saddle-point variation and saddle-point complex-rotation methods. The first-order perturbation theory is used to calculate relativistic and mass polarization corrections. Present energy levels, radiative transition rates and wavelengths, Auger rates and electron energies are compared with theoretical and experimental values in the literature. The total radiative rates and the total Auger rates for these resonances are also discussed with nuclear charge numbers.

74 ATOMIC AND MOLECULAR PHYSICS↗

Energy levels, lifetimes and radiative rates for transitions in the bromine isoelectronic sequence La XXIII-Dy XXXII, W XL

Using the multiconfiguration Dirac–Fock method, calculations for the lowest 62 levels of the ([Ar] 3d{sup 10})4s{sup 2}4p{sup 5}, ([Ar] 3d{sup 10})4s{sup 2}4p{sup 3}4d{sup 2}, ([Ar] 3d{sup 10})4s{sup 2}4p{sup 4}4d, ([Ar] 3d{sup 10})4s4p{sup 6}, and ([Ar] 3d{sup 10})4s4p{sup 5}4d configurations are performed for the bromine isoelectronic sequence La XXIII-Dy XXXII, W XL. Results of energy levels, lifetimes, wavelengths, and electric dipole, magnetic dipole, electric quadrupole, and magnetic quadrupole radiative rates are presented. In order to assess the accuracy of results, independent calculations for W XL have been carried out using the many-body perturbation theory (MBPT) method. Comparisons are made with available theoretical results from other calculations and the observed values of the Atomic Spectra Database of the National Institute of Standards and Technology. Energy levels are estimated to be accurate to better than 1%, and radiative rates (and lifetimes) are accurate to better than 20% for a majority of strong transitions. These results should be useful in many applications of lanthanide ions related to broad area of research such as applied physics, laser physics and fusion science.

74 ATOMIC AND MOLECULAR PHYSICS↗

Energy levels and transition rates for Al-like Cu XVII

Energy levels and transition rates for electric-dipole, electric-quadrupole, magnetic-dipole, and magnetic-quadrupole transitions among the levels arising from the n≤5 configurations in Al-like Cu XVII are calculated respectively by two state-of-the-art methods, namely, the Multi-Configuration Dirac–Hartree–Fock approach and the second-order many-body perturbation theory. Our results are compared with available experimental and other theoretical values. In addition, effective collision strengths of direct excitation between these levels are provided using the distorted wave approximation. Several line pairs are pointed out that might be useful for density diagnostics.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Theoretical level energies and transition data for ion W{sup 28+}

The ab initio quasirelativistic approach was used to derive transition data for Pd-like tungsten W{sup 28+} ion. This approach was developed specifically for the calculation of spectral parameters for highly charged ions. The relativistic effects were taken into account in the Breit–Pauli approximation. The configuration interaction method was applied to include electron correlation effects. The ground configuration 4p{sup 6}4d{sup 10} and the lowest excited 4p{sup 6}4d{sup 9}4f were considered. The calculations for W{sup 28+} were performed with different sets of interacting configurations in order to evaluate reliability and accuracy of produced results. Level energies, radiative lifetimes τ, Landé g-factors were determined for the excited configuration 4p{sup 6}4d{sup 9}4f of W{sup 28+} levels. The radiative transition wavelengths λ and emission transition probabilities A for the electric and magnetic transitions of various multipole order (up to E5 and M4) among the levels of these two configurations were produced. The uncertainties of computed spectroscopic parameters were evaluated.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Landau levels in the presence of a cosmic string in rainbow gravity

In this paper we analyze the energy levels of a charged scalar particle placed in the static cosmic string spacetime, under the action of a uniform magnetic field parallel to the string, in the context of the semi-classical approach of the rainbow gravity. Firstly, we focus on the non-relativistic regime by solving the corresponding Schrödinger equation, following by a complete relativistic treatment of the problem in which we considered the Klein–Gordon equation. In both cases we find exact expressions for the Landau levels in terms of the rainbow functions, used to characterize a rainbow gravity model. In order to achieve the results of this paper we considered three different rainbow gravity models mostly used in the literature and compare the resulting modifications in the Landau levels with the standard case, namely without rainbow gravity.

79 ASTRONOMY AND ASTROPHYSICS↗

Defect energy levels and persistent luminescence in Cu-doped ZnS

Zinc sulfide (ZnS) based materials are widely used in many applications. Yet, due to a lack of detailed knowledge of defect energy levels, the electrical properties and luminescence mechanisms in the materials still give rise to debate. Here, we report a first-principles study of native point defects and impurities in zincblende ZnS using hybrid density-functional calculations. We find that cation and anion vacancies and antisite defects introduce deep defect levels in the band gap and can act as donors or acceptors depending on the position of the Fermi level. The substitutional impurity Cu Zn acts as a deep acceptor and thus does not contribute to p-type conductivity. Substitutional impurities Al Zn and Cl S , on the other hand, are shallow donors. More importantly, we identify the isolated (i.e., unassociated) Cu Zn as a source of the green luminescence observed in ZnS-based phosphors and Cu Zn – Al Zn and Cu Zn – Cl S defect complexes as sources of blue luminescence. Further, the materials may have both green and blue emissions with the relative intensity dependent on the ratio between the unassociated defect and defect complex concentrations, which is also consistent with experimental observations.

36 MATERIALS SCIENCE↗

Chemical randomness, lattice distortion and the wide distributions in the atomic level properties in high entropy alloys

High entropy alloys (HEAs) consist of multiple elements present in large proportions that are randomly distributed on a crystal lattice. On the one hand, the presence of multiple elements engenders wide ranges of atomic radii, electronegativities, electron valences and magnetic moments, whereas on the other, the presence of chemical randomness creates unique nearest neighbor environments among the lattice sites. As a result, the symmetry of the energy landscape is broken essentially at each lattice site thereby resulting in highly distorted energy landscapes. At the atomistic level, the lattice distortion has been widely observed in the form of varying bond lengths. At the electronic level, a range of charge transfers result in the charge density distortion. Collectively, the distorted landscapes cause large quantitative variations of the atomic level properties; in this review, we highlight the effect of lattice distortion on point defect energetics, stacking fault energies, and dislocation mobility. Besides the well- known large HEAs phase space, the enormity of the distorted energy landscape that scales with the atomic configurations is a new consideration; understanding this coupling between composition, lattice distortion and properties’ variations thus becomes an exciting but challenging area within the field of HEAs. Furthermore, this coupling is expected to open a new door for materials design, where the materials properties could be tuned via leveraging the lattice distortion, which is essentially absent in dilute/ordered alloys.

36 MATERIALS SCIENCE↗

Computing the QRPA level density with the finite amplitude method

Here, we describe a new algorithm to calculate the vibrational nuclear level density of an atomic nucleus. Fictitious perturbation operators that probe the response of the system are generated by drawing their matrix elements from some probability distribution function. We use the Finite Amplitude Method to explicitly compute the response for each such sample. With the help of the Kernel Polynomial Method, we build an estimator of the vibrational level density and provide the upper bound of the relative error in the limit of infinitely many random samples. The new algorithm can give accurate estimates of the vibrational level density. Since it is based on drawing multiple samples of perturbation operators, its computational implementation is naturally parallel and scales like the number of available processing units.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Integrated modeling analysis of estuarine responses to extreme hydrological events and sea-level rise

Estuaries are vulnerable to climate change and are particularly sensitive to extreme river discharge (RD) and sea-level rise (SLR). To understand the effects of extreme RD and SLR on estuaries, an integrated modeling approach is adopted to simulate hydrodynamic changes in the Yangtze River Estuary. Model results showed that SLR will intensify the estuarine hydrodynamics in water level, currents, and salinity. Water level, current speed, and salinity increased linearly with the magnitude of SLR. The hydrological model suggested a lower RD in the future. This will increase the saltwater intrusion, which will be more severe during the lower RD and drought extreme hydrological event (EHE) conditions. Model results also suggested that the saltwater intrusion is more sensitive to RD than SLR. In addition, the interplay between the RD and SLR will exacerbate the impacts of coastal oceans on estuarine hydrodynamics, especially during extremely low RD conditions. Moreover, the decrease of RD and deepening of the channel due to human activities will also amplify the effects of SLR on the Estuary, increasing the risk of coastal disasters.

3-D hydrodynamic model, extreme climate, draught, ↗

Formation of high concentrations of isolated Zn vacancies and evidence for their acceptor levels in ZnO

Here, research is described here that is directed toward obtaining p -type ZnO crystals either by doping or by creating native defects. Theoretically, zinc vacancies are shallow acceptors that should allow for p -type conduction. Bulk ZnO crystals can be grown by chemical vapor transport (CVT), melt solidification, and hydrothermal methods. Here we have explored annealing processes with the goal of creating zinc vacancies in bulk ZnO crystals. Positron annihilation spectra reveal the reproducible formation of high concentrations (>10 20 cm –3 ) of isolated zinc vacancies ( V Zn ) in oxygen-annealed, CVT-grown ZnO crystals in the ~100–150 nm near-surface. Melt- and hydrothermally grown samples, in contrast, show insignificant levels of zinc vacancy creation. Photoluminescence (PL) emission spectra indicate a V Zn (0/-1) acceptor level at ~ 155–165 meV; red PL (~1.7 eV) emission, related to the V Zn (-1/-2) level, was also observed. Infrared absorption spectroscopy reveals the presence of a zinc vacancy complex with a hole binding energy range of 420–450 meV – and with a continuum suggesting a p -type region. XPS measurements support the deficiency of Zn after oxygen annealing the CVT-grown ZnO single crystal.

36 MATERIALS SCIENCE↗

Identifying arbitrary parameter zonation using multiple level set functions

In this paper, we extended the analytical level set method [1, 2] for identifying a piece-wisely heterogeneous (zonation) binary system to the case with an arbitrary number of materials with unknown material properties. In the developed level set approach, starting from an initial guess, the material interfaces are propagated through iterations such that the residuals between the simulated and observed state variables (hydraulic head) is minimized. We derived an expression for the propagation velocity of the interface between any two materials, which is related to the permeability contrast between the materials on two sides of the interface, the sensitivity of the head to permeability, and the head residual. We also formulated an expression for updating the permeability of all materials, which is consistent with the steepest descent of the objective function. The developed approach has been demonstrated through many examples, ranging from totally synthetic cases to a case where the flow conditions are representative of a groundwater contaminant site at the Los Alamos National Laboratory. These examples indicate that the level set method can successfully identify zonation structures, even if the number of materials in the model domain is not exactly known in advance. Although the evolution of the material zonation depends on the initial guess field, inverse modeling runs starting with different initial guesses fields may converge to the similar final zonation structure. These examples also suggest that identifying interfaces of spatially distributed heterogeneities is more important than estimating their permeability values.

97 MATHEMATICS AND COMPUTING↗

The role of seniority-zero states in nuclear level densities

At low excitation energies seniority-zero states dominate the level density of K=0 bands in deformed even–even nuclei, while they play no role at higher excitation energies. We describe the level densities in a Fermi-gas model as well as in a combinatorial level-density model and compare to detailed experimental data for some rare-earth nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Level density within a micro-macroscopic approach

Statistical level density $ρ$($E, A$) is derived for nucleonic system with a given energy $E$, particle number $A$ and other integrals of motion in the micro-macroscopic approximation beyond the standard saddle-point method of the Fermi gas model. This level density reaches the two limits; the well-known Fermi gas grand-canonical ensemble limit for a large entropy $S$ related to large excitation energies, and the finite micro-canonical limit for a small combinatorical entropy $S$ at low excitation energies. In conclusion, the inverse level density parameter $K$ as function of the particle number $A$ in the semiclassical periodic orbit theory, taking into account the extended Thomas-Fermi and Strutinsky shell corrections, is calculated and compared with experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear level density, thermalization, chaos, and collectivity

The knowledge of the level density is necessary for understanding nuclear reactions involving excited nuclear states. In particular, it is an important element in description of astrophysical processes and in technological applications. This review article explains main ideas of physics forming the level density in complex nuclei that grows very fast due to combinatorial complexity of total excitation energy shared by many constituents. This can be translated into a language of statistical physics by the Darwin–Fowler method. We briefly go through the historical development from the nuclear Fermi-gas model to the self-consistent mean field including the pairing effects. At the next step we introduce the ideas of thermalization in a closed mesoscopic system and quantum chaos with very complicated eigenfunctions. This is supported by the experience of the shell model in a limited orbital space that either provides an exact solution or uses the Monte Carlo approach. The statistical method of moments allows one to avoid the exact diagonalization keeping intact the quality of the results. We discuss the popular “constant temperature model” that describes well available data and the shell-model results; it is shown that its success cannot be explained by the phase transition from superfluid to a normal phase. The interpretation is suggested, supported by the numerical studies, in terms of dynamical chaotization including the collective enhancement of the level density. The role of incoherent collision-like interactions is stressed as a necessary element of the thermalization process.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗