Search NASA⌕ Search

SEARCH · Search NASA

Results for “Lattice optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Toward high-throughput defect density quantification: A comparison of techniques for irradiated samples

Transmission electron microscopy (TEM) is an established tool used for the investigation of defects in materials. Traditionally, diffraction contrast techniques—two-beam bright-field and weak-beam dark-field—have been used to image defects due to contrast sensitivity from weak lattice strains. Use of these methods entail an intricate tilt series of imaging using different diffracting vectors, g, to verify the g•b invisibility criterion relative to the different defect types and habit planes inherent to the material. Recently, the addition of down-zone imaging and STEM imaging has also proven to be effective imaging techniques for defect density analysis. Interest in nanocrystalline (NC) materials, spurred by their conjectured superior properties compared to their coarse-grain counterparts, has been thriving and the investigation of their defect morphologies is essential. Maneuvering within NC samples in the TEM adds another layer of difficulty making the aforementioned techniques not practical for application to specimens with complex microstructures. For this reason, we have devised a protocol for identifying NC grains optimally oriented for quantitative analysis using NanoMegas ASTAR automated crystal orientation mapping (ACOM) in the TEM. In this work, we conduct a series of experiments assessing the effectiveness of conventional two-beam bright-field, weak-beam dark-field, and down-zone STEM imaging. Here, we also evaluate an ACOM-assisted multibeam imaging method and compare defect density results obtained using each technique in an irradiated nanocrystalline Au sample.

36 MATERIALS SCIENCE↗

Strain Effects in SrHfO 3 Films Grown by Hybrid Molecular Beam Epitaxy

Perovskite oxide heterostructures host a large number of interesting phenomena such as ferroelectricity, which are often driven by octahedral distortions in the crystal that may induce polarization. SrHfO 3 (SHO) is a perovskite oxide with a pseudocubic lattice parameter of 4.08 Å that previous density functional theory (DFT) calculations suggest can be stabilized in a ferroelectric P4mm phase when stabilized with sufficient compressive strain. Additionally, it is insulating and possesses a large band gap and a high dielectric constant, making it an ideal candidate for oxide electronic devices. Here, to test the viability of epitaxial strain as a driver of ferroic phase transitions, SHO films were grown by hybrid molecular beam epitaxy (hMBE) with a tetrakis(ethylmethylamino)hafnium(IV) source on GdScO 3 and TbScO 3 substrates. Strained SHO phases were characterized using X-ray diffraction, X-ray absorption spectroscopy, and scanning transmission electron microscopy to determine the space group of the strained films, with the results compared to those of DFT-optimized models of phase stability versus strain. Contrary to past reports, we find that compressively strained SrHfO 3 undergoes octahedral tilt distortions without associated ferroelectric polarization and most likely takes on the I4/mcm phase with the a 0 a 0 c – tilt pattern.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

BAGELS for simultaneous polarization, orbit, and optics control in electron storage rings

We present a new method for minimizing the effects of radiative depolarization in electron storage rings by use of a minimal number of special vertical orbit bumps. The bumps can be used to minimize the effects of radiative depolarization while simultaneously maintaining other common benefits of vertical orbits, e.g., transverse coupling and vertical dispersion control. Because simultaneously optimizing the large number of vertical correctors in a ring is operationally infeasible, we use dimensionality reduction to define a minimal number of the most effective groups of vertical correctors that can be optimized during operation, motivating the name “Best Adjustment Groups for ELectron Spin” (BAGELS). The method is streamlined by using suitable “basis bumps” instead of all individual vertical correctors. We define three types of basis bumps for different purposes: (i) generates no delocalized transverse coupling nor delocalized vertical dispersion, (ii) generates no delocalized vertical dispersion, and (iii) generates no delocalized transverse coupling. BAGELS has been essential in the design of the Electron Storage Ring (ESR) of the Electron-Ion Collider (EIC) and will be beneficial for any polarized electron ring, including FCC-ee. HERA and LEP would have likely benefitted as well. We use BAGELS to significantly increase polarization in the 18 GeV EIC-ESR, beyond what is achievable with conventional methods; in the 1-IP lattice, we nearly double the asymptotic polarization, and in the 2-IP lattice, we more than triple the asymptotic polarization. We also use BAGELS to construct knobs that can be used for global coupling correction, and knobs that generate vertical emittance for beam size matching, all while having minimal impacts on the polarization and orbit/optics. Published by the American Physical Society 2025

43 PARTICLE ACCELERATORS↗

Topological superconductivity in Landau levels

The intense search for topological superconductivity is inspired by the prospect that it hosts Majorana quasiparticles. We explore in this work the optimal design for producing topological superconductivity by combining a quantum Hall state with an ordinary superconductor. To this end, we consider a microscopic model for a topologically trivial two-dimensional p-wave superconductor exposed to a magnetic field, and find that the interplay of superconductivity and Landau level physics yields a rich phase diagram of states as a function of μ/t and Δ/t, where μ, t and Δ are the chemical potential, hopping strength, and the amplitude of the superconducting gap. In addition to quantum Hall states and topologically trivial p-wave superconductor, the phase diagram also accommodates regions of topological superconductivity. Most importantly, we find that application of a non-uniform, periodic magnetic field produced by a square or a hexagonal lattice of h/e fluxoids greatly facilitates regions of topological superconductivity in the limit of Δ/t → 0. In contrast, a uniform magnetic field, a hexagonal Abrikosov lattice of h/2e fluxoids, or a one dimensional lattice of stripes produces topological superconductivity only for sufficiently large Δ/t.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantum simulations in effective model spaces: Hamiltonian-learning variational quantum eigensolver using digital quantum computers and application to the Lipkin-Meshkov-Glick model

Quantum simulations offer the potential to predict the structure and dynamics of nuclear many-body systems that are beyond the capabilities of classical computing. Generally, preparing the ground state of strongly-interacting many-body systems relevant to nuclear physics is however inefficient, even using ideal quantum computers. In addition, currently available NISQ-era quantum devices possess modest numbers of qubits, limiting the size of quantum many-body systems that can be simulated. In this context, a reformulation of the quantum many-body problems using truncated model spaces and Hamiltonians is desirable to make them more amenable to near-term quantum computers. The importance of symmetries in low-energy theories, including effective field theories (EFTs), lattice quantum chromodynamics (QCD), and effective model spaces for nuclear systems, in particular their interplay with the reduction of active Hilbert spaces, is well known. Lesser known is the fact that the non-commutivity of some symmetries and truncations of the model space can be profitably combined with variational calculations to rearrange the entanglement into localized structures and enable more efficient simulations. Here, the goal of the present study is to explore and utilize the non-commutivity of symmetries and model-space truncations of quantum many-body systems important to nuclear physics, particularly in combination with variational algorithms for quantum simulations and effective Hamiltonian learning. We introduce an iterative hybrid classical-quantum algorithm, Hamiltonian learning variational quantum eigensolver (HL-VQE), that simultaneously optimizes an effective Hamiltonian, thereby rearranging entanglement into the effective model space, and the associated ground-state wavefunction. Quantum simulations, using classical computers and IBM's superconducting-qubit quantum computers, are performed to demonstrate the HL-VQE algorithm, in the context of the Lipkin-Meshkov-Glick (LMG) model of interacting fermions, where the Hamiltonian transformation corresponds to an orbital rotation. We use a mapping where the number of qubits scales with the $\log$ of the size of the effective model space, rather than the particle number. HL-VQE is found to provide an exponential improvement in LMG-model calculations of the ground-state energy and wavefunction, compared to naive truncations without Hamiltonian learning, throughout a significant fraction of the Hilbert space. In the context of EFT, this corresponds to counterterms scaling exponentially with the cut-off as opposed to power law. Implementations on IBM's QExperience quantum computers and simulators for 1- and 2-qubit effective model spaces are shown to provide accurate and precise results, reproducing classical predictions. For a range of parameters defining the LMG model, the HL-VQE algorithm is found to have better scaling of quantum resources requirements than previously explored algorithms. In particular, the HL-VQE scales efficiently over a large fraction of the model space, in contrast to VQE alone. This work constitutes a step in the development of entanglement-driven quantum algorithms for descriptions of nuclear many-body systems. This, in part, leverages the potential of noisy intermediate-scale quantum (NISQ) devices. The exponential scaling of counterterms observed in this study suggests the possibility of more general applicability to other non-perturbative EFTs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A projection-based method for topology optimization of structures with graded surfaces

Topology optimization (TO) is a generative design approach that is used to create new structures that are optimal for their purpose. Standard parameterizations of the TOproblem allow exploration of an arbitrarily complex design space, but must be constrained to ensure manufacturability; these constraints tend to be computationally expensive and intrusive to the design process. A relatively new parametrization of the TO problem uses geometry projection of known-manufacturable building blocksinto the design domain, but the existing library of building blocks compatible with projection is small. This project sought to expand this library with new shapes, and to determine whether theaddition of these new shapes could be used to design unit cells for micro-architected materials (MAMs) with improved stiffness-to-weight ratio compared with traditional designs,while retaining compatibility with additive manufacturing processes.Due to a reduction in scope, effort was focused on truss lattices with hollow, tapered, and curved struts. Hollowtruss lattices were found that outperform traditional designs like the octet truss in both stiffness and isotropy, as well as providing a decoupling between the stiffness and relative density. These new designs are expected to improve the performance of functionally graded structures in programmatic applications.

42 ENGINEERING↗

From thermoelectric bulk to nanomaterials: Current progress for Bi 2 Te 3 and CoSb 3 : From thermoelectric bulk to nanomaterials

We synthesized Bi 2 Te 3 and CoSb 3 based nanomaterials and their thermoelectric, structural, and vibrational properties analyzed to assess and reduce ZT-limiting mechanisms. The same preparation and/or characterization methods were applied in the different materials systems. Single-crystalline, ternary p-type Bi 15 Sb 29 Te 56 , and n-type Bi 38 Te 55 Se 7 nanowires with power factors comparable to nanostructured bulkmaterialswere prepared by potential-pulsed electrochemical deposition in a nanostructured Al 2 O 3 matrix. p-type Sb 2 Te 3 , n-type Bi 2 Te 3 , and n-type CoSb 3 thin films were grown at room temperature using molecular beam epitaxy and were subsequently annealed at elevated temperatures. It yielded polycrystalline, single phase thin films with optimized charge carrier densities. In CoSb 3 thin films the speed of sound could be reduced by filling the cage structure with Yb and alloying with Fe yielded p-type material. Bi 2 (Te 0.91 Se 0.09 ) 3 /SiC and (Bi 0.26 Sb 0.74 ) 2 Te 3 /SiC nanocomposites with low thermal conductivities and ZT values larger than 1 were prepared by spark plasma sintering. Nanostructure, texture, chemical composition, as well as electronic and phononic excitations were investigated by X-ray diffraction, nuclear resonance scattering, inelastic neutron scattering, M ossbauer spectroscopy, and transmission electron microscopy. Furthermore, for Bi 2 Te 3 materials, ab-initio calculations together with equilibrium and non-equilibrium molecular dynamics simulations for point defects yielded their formation energies and their effect on lattice thermal conductivity, respectively. Current advances in thermoelectric Bi 2 Te 3 and CoSb 3 based nanomaterials are summarized. Advanced synthesis and characterization methods and theoreticalmodelingwere combined to assess and reduce ZT-limiting mechanisms in these materials.

36 MATERIALS SCIENCE↗

Orientation-dependent piezoelectric properties in lead-free epitaxial 0.5BaZr{sub 0.2}Ti{sub 0.8}O{sub 3}-0.5Ba{sub 0.7}Ca{sub 0.3}TiO{sub 3} thin films

Orientation-engineered 0.5BaZr{sub 0.2}Ti{sub 0.8}O{sub 3}-0.5Ba{sub 0.7}Ca{sub 0.3}TiO{sub 3} (BZT-BCT) thin films were deposited on La{sub 0.7}Sr{sub 0.3}MnO{sub 3}-coated SrTiO{sub 3} single-crystalline (001), (110), and (111) substrates by off-axis radio-frequency magnetron sputtering. X-ray diffraction confirmed a highly epitaxial growth of all the as-deposited films. It is believed the strong orientation dependence of ferroelectric and piezoelectric properties on the films is attributed to the relative alignment of crystallites and spontaneous polarization vector. The optimal ferroelectric response lies in the [001] direction, whereas a comparatively large effective piezoelectric coefficient d{sub 33,eff} of 100.1 ± 5 pm/V was attained in [111] BZT-BCT thin film, suggesting its potential application for high-performance lead-free piezoelectric devices.

36 MATERIALS SCIENCE↗

Quantum stabilization and flat hydrogen-based bands of nitrogen-doped lutetium hydride

We explore the electronic and structural properties of Lu-H-N structures with specific N,H ordering due to their remarkably narrow hydrogen-based bands at the Fermi level. Although exhibits a classical instability persisting up to 17 GPa, it is anharmonically stable near ambient pressure when accounting for quantum nuclear effects. The presence of flat bands near is understood to arise from destructive quantum interference between and surrounding orbitals, with certain types of defects leaving the flat bands unaffected. The results suggest that if this system is superconducting, there is an optimal pressure near ambient where the superconducting is maximized by anharmonically stabilized low-frequency and nonadiabatically coupled high-frequency hydrogen modes. Despite the metastability of this structure, its dynamical stability when modeled beyond a classical harmonic approach suggests the narrow bands near do not cause structural distortions in certain Lu-H-N stoichiometries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Changes of the Thermodynamic Properties at Isochoric and Isobaric Decrease of the Silicon Nanocrystal Size

Equation of state P(ν/ν{sub o}) and the baric dependences of the lattice and surface properties of silicon macro- and nanocrystals have been calculated using the method of calculation of crystal properties from the pair Mie–Lennard-Jones interatomic potential and the RP-model of nanocrystal. The isothermal dependences of P(ν/ν{sub o}) for the macro- and the nanocrystal are shown to be intersected at a certain value of relative volume (ν/ν{sub o}){sub 0}. The surface pressure becomes zero at the intersection point (at (ν/ν{sub o}){sub 0}). The value of (ν/ν{sub o}){sub 0} decreases upon isomorphic–isomeric increase in temperature and also at isomorphic–isothermic decrease in the number of atoms N in the nanocrystal, or at isomeric–isothermic deviation of the nanocrystal shape from the most energetically optimal shape (in the RP-model, this shape is a cube). The obtained equation of state is used to study the changes of the silicon properties at isochoric (ν/ν{sub o} = 1) and also isobaric (P = 0) decrease in N at temperatures 300 and 1000 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theory of sigma bond resonance in flat boron materials

Abstract In chemistry, theory of aromaticity or π bond resonance plays a central role in intuitively understanding the stability and properties of organic molecules. Here we present an analogue theory for σ bond resonance in flat boron materials, which allows us to determine the distribution of two-center two-electron and three-center two-electron bonds without quantum calculations. Based on this theory, three rules are proposed to draw the Kekulé-like bonding configurations for flat boron materials and to explore their properties intuitively. As an application of the theory, a simple explanation of why neutral borophene with ~1/9 hole has the highest stability and the effect of charge doping on borophene’s optimal hole concentration is provided with the assumption of σ and π orbital occupation balance. Like the aromaticity theory for carbon materials, this theory greatly deepens our understanding on boron materials and paves the way for the rational design of various boron-based materials.

36 MATERIALS SCIENCE↗

Quantum Hardware-Enabled Molecular Dynamics via Transfer Learning

The ability to perform ab initio molecular dynamics simulations using potential energy surfaces provided by quantum computers would open the door to virtually exact dynamics for a variety of chemical and biochemical systems, with impacts on catalysis and biophysics. Nonetheless, performing molecular dynamics on surfaces produced by quantum hardware has been hampered by the noisy energies typically produced by quantum computers and challenges associated with computing gradients and scaling to large systems interest. A recent set of advances in machine learning, known as transfer learning, provides a new path forward for molecular dynamics simulations on quantum hardware. Transfer learning offers a workaround, where one first trains models on larger, less accurate classical datasets and then refines them on smaller, more accurate quantum datasets. We explore this approach by training machine learning models to predict a molecule's potential energy based on its geometric structure using Behler-Parrinello neural networks. When successfully trained, the model enables energy gradient predictions necessary for dynamic simulations. To reduce the quantum resources needed, the model is initially trained with data derived from classical density functional theory and subsequently refined with a smaller dataset obtained from a variational quantum eigensolver optimization of the unitary coupled cluster ansatz. We show that this approach significantly reduces the size of the needed quantum training dataset while capturing the high accuracies needed within quantum chemistry simulations. The success of this two-step training method opens more opportunities to apply machine learning models on quantum data, a significant stride towards efficient quantum-classical hybrid computational models.

quantum computing↗

Oxygen Reduction on Well-Defined Core-Shell Nanocatalysts: Particle Size, Facet, and Pt Shell Thickness Effects

We examined the effects of the thickness of the Pt shell, lattice mismatch, and particle size on specific and mass activities from the changes in effective surface area and activity for oxygen reduction induced by stepwise Pt-monolayer depositions on Pd and Pd{sub 3}Co nanoparticles. The core?shell structure was characterized at the atomic level using Z-contrast scanning transmission electron microscopy coupled with element-sensitive electron energy loss spectroscopy. The enhancements in specific activity are largely attributed to the compressive strain effect based on the density functional theory calculations using a nanoparticle model, revealing the effect of nanosize-induced surface contraction on facet-dependent oxygen binding energy. The results suggest that moderately compressed (111) facets are most conducive to oxygen reduction reaction on small nanoparticles and indicate the importance of concerted structure and component optimization for enhancing core?shell nanocatalysts activity and durability.

30 DIRECT ENERGY CONVERSION↗

Modulating coordinate site occupancy in high-entropy spinel electrocatalysts

High entropy spinel oxides provide a versatile platform for electrocatalysis because multiple metal cations can be incorporated into a single crystalline lattice, enabling tunable electronic structures. However, controlling how these cations distribute between tetrahedral and octahedral coordination sites remains a major challenge, limiting rational catalyst design. Here, we modulate cation coordination site occupancy between tetrahedral and octahedral sites in a Co–Fe–Cr–Mn–Ni framework by introducing a sixth cation (Zn, Ga, Mg, or Al) with distinct site preference energies. Using density functional theory, synchrotron X-ray absorption spectroscopy, and magnetic circular dichroism, we demonstrate that Zn preferentially occupies tetrahedral sites, driving increased octahedral occupancy of cobalt. This redistribution increases the population of octahedrally coordinated cobalt in mixed oxidation states, enhances electrical conductivity, and improves oxygen evolution reaction activity. Our findings establish coordination site occupancy as a critical design parameter, providing a strategic pathway for tailoring multicomponent spinel electrocatalysts with optimized performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bosonic field digitization for quantum computers

Quantum simulation of quantum field theory is a flagship application of quantum computers that promises to deliver capabilities beyond classical computing. The realization of quantum advantage will require methods that can accurately predict error scaling as a function of the resolution and parameters of the model and that can be implemented efficiently on quantum hardware. In this paper, we address the representation of lattice bosonic fields in a discretized field amplitude basis, develop methods to predict error scaling, and present efficient qubit implementation strategies. A low-energy subspace of the bosonic Hilbert space, defined by a boson occupation number cutoff, can be represented with exponentially good accuracy by a low-energy subspace of a finite-size Hilbert space. The finite representation construction and the associated errors are directly related to the accuracy of the Nyquist-Shannon sampling and the finite Fourier transforms of the boson number states in the field and the conjugate-field bases. We analyze the relation between the boson mass, the discretization parameters used for wave function sampling, and the finite representation size. Numerical simulations of small size Φ 4 problems demonstrate that the boson mass optimizing the sampling of the ground state wave function is a good approximation to the optimal boson mass yielding the minimum low-energy subspace size. However, we find that accurate sampling of general wave functions does not necessarily result in accurate representation. Finally, we develop methods for validating and adjusting the discretization parameters to achieve more accurate simulations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

3D Printed Carbon Aerogels for Polymer-Electrolyte Fuel Cells

Carbon aerogels (CA) are known for ultra-low density, very high surface area, fine porous structure, and excellent electrical conductivity. Recent advances in high resolution 3D printing at LLNL enable the manufacturing of complex structured CA electrodes which have been demonstrated in electrolysis, flow battery, and supercapacitor applications. Polymer-electrolyte fuel cells (PEFC) may be an excellent candidate for these materials/methods as designers seek to optimize membrane-electrode assemblies to achieve higher efficiencies. A major challenge to PEFC design is two-phase flow due to water production which causes pore flooding and leads to cell instability and degradation. To mitigate these effects, groups have investigated the creation of liquid specific pathways in the porous layers to alleviate liquid buildup and enhance gas diffusion. While some progress has been made, traditionally manufactured GDLs, which consist of randomly distributed carbon fibers, are limiting. 3D printed CAs are a promising solution as complex macroporous electrode structures can be manufactured out of micro and nano porous filaments with a high level of control. Additionally, the process may allow for the consolidation of multiple layers (MPL, GDL, & flow channels) into a single printed architecture. In this work various CA lattice structures were printed using a direct ink write (DIW) method and liquid breakthrough pressures were measured to demonstrate the ability to tune the water pathways to achieve specific pressure thresholds. Furthermore, a discussion of the prospects for printed CA electrodes in PEFC will focus on material properties, synthesis techniques, and current challenges.

36 MATERIALS SCIENCE↗

Evaluation of Additively Manufactured Monolithic SiC and SiC-Matrix Ceramic Matrix Composites for Concentrating Solar Receiver Applications - Fabrication and Testing of Receiver Design Feature Specimens in a Simulating Lab Test via Laser Heating

Increasing operating temperatures of solar receivers is paramount to the efficiency of concentrated solar thermal (CST) and solar power (CSP) systems. Owing to its high temperature stability combined with excellent thermal and optical properties, SiC has been the material of choice for application in high-temperature solar receivers. We report the results of our study of the effective heat transfer characteristics of several candidate SiC structure motifs, or feature geometries, which are fabricated via additive manufacturing. The SiC structure motifs studied include different permutations of three-dimensional periodic lattices and defined shapes. A solar-thermal simulating laboratory test setup is constructed using a 4kW CO2 laser system with beam shaping optics to apply concurrent radiative heating power on one face of 2”-diameter cylindrical feature specimens, representing the structure motifs of interest for receiver element design, while flowing through the sample as heat transfer fluid. Using the test setup, simulative test conditions representative of a concentrated solar flux of up to ~2000 suns could be achieved in the lab tests under varying air flow through the test structure. A simple 1D numerical analysis scheme is developed to extract an effective or compound heat transfer coefficient representative of the test structure under steady-state heat flow conditions. The test results and their use to guide the selection and optimization of SiC material and structure motifs for the receiver element design fabrication are discussed.

14 SOLAR ENERGY↗

Ultrafast Switching of Interfacial Thermal Conductance

Dynamical control of thermal transport at the nanoscale provides a time-domain strategy for optimizing thermal management in nanoelectronics, magnetic devices, and thermoelectric devices. However, the rate of change available for thermal switches and regulators is limited to millisecond time scales, calling for a faster modulation speed. Here, in this work, time-resolved X-ray diffraction measurements and thermal transport modeling reveal an ultrafast modulation of the interfacial thermal conductance of an FeRh/MgO heterostructure as a result of a structural phase transition driven by optical excitation. Within 90 ps after optical excitation, the interfacial thermal conductance is reduced by a factor of 5 and lasts for a few nanoseconds, in comparison to the value at the equilibrium FeRh/MgO interface. The experimental results combined with thermal transport calculations suggest that the reduced interfacial thermal conductance results from enhanced phonon scattering at the interface where the lattice experiences transient in-plane biaxial stress due to the structural phase transition of FeRh. Our results suggest that optically driven phase transitions can be utilized for ultrafast nanoscale thermal switches for device application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗