Search NASA⌕ Search

SEARCH · Search NASA

Results for “MONOCRYSTALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Holders for in situ treatments of scanning tunneling microscopy tips

We have developed holders for scanning tunneling microscopy tips that can be used for in situ treatments of the tips, such as electron bombardment (EB) heating, ion sputtering, and the coating of magnetic materials. The holders can be readily installed into the transfer paths and do not require any special type of base stages. Scanning electron microscopy is used to characterize the tip apex after EB heating. Also, spin-polarized scanning tunneling spectroscopy using an Fe coated W tip on the Cr(001) single crystal surface is performed in order to confirm both the capability of heating a tip up to about 2200 K and the spin sensitivity of the magnetically coated tip.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Characterization of damage induced by heavy neutron irradiation on multilayered {sup 6}LiF-single crystal chemical vapor deposition diamond detectors

High performance neutron detectors sensitive to both thermal and fast neutrons are of great interest to monitor the high neutron flux produced, e.g., by fission and fusion reactors. An obvious requirement for such an application is neutron irradiation hardness. This is why diamond based neutron detectors are currently under test in some of these facilities. In this paper the damaging effects induced in chemical vapor deposition (CVD) diamond based detectors by a neutron fluence of approx2x10{sup 16} neutrons/cm{sup 2} have been studied and significant changes in spectroscopic, electrical, and optical properties have been observed. The detectors are fabricated using high quality synthetic CVD single crystal diamond using the p-type/intrinsic/Schottky metal/{sup 6}LiF layered structure recently proposed by Marinelli et al. [Appl. Phys. Lett. 89, 143509 (2006)], which allows simultaneous detection of thermal and fast neutrons. Neutron radiation hardness up to at least 2x10{sup 14} n/cm{sup 2} fast (14 MeV) neutron fluence has been confirmed so far [see Pillon et al., (Fusion Eng. Des. 82, 1174 (2007)]. However, at the much higher neutron fluence of approx2x10{sup 16} neutrons/cm{sup 2} damage is observed. The detector response to 5.5 MeV {sup 241}Am alpha-particles still shows a well resolved alpha-peak, thus confirming the good radiation hardness of the device but a remarkable degradation and a significant instability with time of charge collection efficiency and energy resolution arise. Symmetric, nearly Ohmic I-V (current-voltage) characteristics have been recorded from the metal/intrinsic/p-doped diamond layered structure, which before neutron irradiation acted as a Schottky barrier diode with a strong rectifying behavior. The nature and the distribution of the radiation induced damage have been deeply examined by means of cathodoluminescence spectroscopy. A more heavily damaged area into the intrinsic diamond at the same position and with the same extension of the {sup 6}LiF layer has been found, the increased damage being ascribed to the highly ionizing particles produced in the {sup 6}LiF layer by thermal neutrons through the nuclear reaction {sup 6}Li(n,alpha)T.

36 MATERIALS SCIENCE↗

Multistep damage evolution process in cubic zirconia irradiated with MeV ions

This work reports the study, via the combination of Rutherford backscattering spectrometry and channeling, x-ray diffraction, and transmission electron microscopy experiments, of the damage formation in cubic yttria-stabilized zirconia single crystals irradiated with medium-energy (4 MeV) heavy (Au) ions. The damage buildup, which is accounted for in the framework of the multistep damage accumulation model, occurs in three steps. The first step at low fluences (up to 10{sup 15} cm{sup -2}), characterized by a regular increase in both the damage yield and the elastic strain, is related to the formation of small defect clusters. The second step in the intermediate fluence range (from 10{sup 15} to 5x10{sup 15} cm{sup -2}) leads to a sharp increase in the damage yield and to a large drop of the strain due to the formation of dislocation loops which collapse into a network of tangled dislocations. The third step at high fluences (above 5x10{sup 15} cm{sup -2}) exhibits a surprising decrease in the damage yield, which may be attributed to the reorganization of the dislocation network that leads to the formation of weakly damaged regions with a size of the order of 100 nm.

36 MATERIALS SCIENCE↗

Achievement of 6.03% conversion efficiency of dye-sensitized solar cells with single-crystalline rutile TiO{sub 2} nanorod photoanode

The rutile TiO{sub 2} nanorods (RTNs) with the length of 40-130 nm and diameters approximately 8-15 nm, containing some 300-500 nm sized RTN aggregates and 6% of anatase TiO{sub 2} nanocrystals, were prepared by surfactant-assisted hydrothermal method. The dye-sensitized solar cell (DSC) based on the RTNs exhibited power conversion efficiency of 6.03%. As compared to P25 TiO{sub 2} based DSC, RTNs based DSC shows improved light-harvesting and Brunauer-Emmett-Teller surface area, leading to an increase in short-circuit current (J{sub sc}) by 40.6%.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Radiation stability of CsBr:Eu needle image plates

Needle image plates (NIPs) based on CsBr:Eu are a good alternative to the BaFBr:Eu powder image plates due to their higher sensitivity and improved spatial resolution. The x-ray radiation stability of the NIPs produced by Agfa Gevaert was investigated and it was found that the radiation stability of the optimized NIPs is as high as that of the commercial CsI:Tl single crystals and much higher than reported in literature for the CsBr:Eu NIPs. The dependence of the sensitivity of the NIPs on the accumulated dose was determined for three different types of x-ray irradiation. It is shown that degradation of the sensitivity starts at about 10 Gy and it is the strongest for the most hard x-ray beam. If the energy absorbed by a NIP is taken into account, the degradation does not depend on the hardness of the applied x-ray beam. It is suggested that the main reason for the observed high radiation stability of the CsBr:Eu NIPs is the use of the oxygen-free Eu{sup 2+}-containing precursor CsEuBr{sub 3} for the doping in the manufacturing process.

36 MATERIALS SCIENCE↗

A View of Compatible Heat-Resistant Alloy and Coating Systems at High-Temperatures

Conventional and advanced coatings were reviewed, and it was pointed out that the coated Ni-base superalloys decreased their creep rupture life significantly at higher temperatures, and the advanced high strength superalloy became more remarkably. Concept of diffusion barrier coating system (DBC system) and their formation process was introduced, and the results obtained for several heat-resistant alloys, stainless steel (SUS310S), Ni-Mo base alloy (Hastelloy-X), and 4{sup th} generation single crystal superalloy (TMS-138) were given. It was noted that creep-rupture life of the SUS310S and Hastelloy-X with the DBC system became longer than those of the bare alloys with or without conventional {beta}-NiAl coatings. This is due to slow creep-deformation of the Re-base alloy layer as the diffusion barrier. A novel concept based on combination of superalloys and coatings was proposed, by taking both the materials science and corrosion science into consideration.

36 MATERIALS SCIENCE↗

Thermal stability of irradiation-induced point defects in cubic silicon carbide

This work aims specifically at studying the evolution of point defects induced by electron irradiation in the cubic polytype of SiC (3C-SiC) at temperatures ranging from 10 to 1450 K by means of photoluminescence (PL) spectroscopy. We identified a first annealing stage between 200 and 245 K, which probably results from migration of interstitials in the carbon sublattice. Moreover, we confirmed the high thermal stability of defect-related PL signals up to about 1100 K and calculated the activation energies associated with their annihilation. Finally, we studied the effect of a high temperature treatment at 1400 K on the D{sub I} center PL intensity in a single-crystal sample irradiated by electrons below the threshold displacement energy of the silicon sublattice. This allows checking the relevance of recent defect models based upon the migration of atoms in the carbon sublattice during the irradiation process. We conclude that the D{sub I} center does not involve the silicon vacancy and could be assigned to an isolated silicon antisite Si{sub C}.

36 MATERIALS SCIENCE↗

Photodesorption of excited iodine atoms from KI (100)

Band-to-band photoexcitation of potassium iodide single crystals with UV photons produces thermal and hyperthermal I-atom emission in both the ground I(2P3/2) and spin orbit excited I*(2P1/2) states. Thermal halogen atom emission is preceded by H-center diffusion from bulk to surface and excited atom emission indicates that the excited hole spin state relaxation is incomplete before H-center diffusion to the surface. The hyperthermal I-atom kinetic energy distribution is inverted in the sense that the electronically excited I*(2P1/2) atoms are more energetic than the ground state I(2P3/2) atoms. The mechanism for hyperthermal emission of halogen atoms and their kinetic energy distributions is discussed in terms of recent calculations and a simple curve crossing model for the dynamical desorption process.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Single crystal chemical vapor deposited diamond detectors for intensity-modulated radiation therapy applications

We report here on first intensity-modulated radiation therapy (IMRT) clinical tests performed at the Gustave Roussy Institute in France using one small (0.117 mm{sup 3}) synthetic single crystal diamond detector (SCDD). We report the comparison between the point doses evaluated with our detector, with a PTW semiflex air ionization chamber (0.125 cm{sup 3}) and calculated with the treatment planning system (TPS), respectively. The obtained results show a maximum difference of 2.3% for the diamond detector and of 4.6% for the ionization chamber, as compared with the TPS calculations. These very promising results show the potentiality of chemical vapor deposited SCDD for dosimetry of IMRT fields and opens up the field for diamond dosimeters toward novel applications such as very small beam monitoring.

36 MATERIALS SCIENCE↗

A portable high-field pulsed-magnet system for single-crystal x-ray scattering studies

We present a portable pulsed-magnet system for x-ray studies of materials in high magnetic fields (up to 30 T). The apparatus consists of a split-pair of minicoils cooled on a closed-cycle cryostat, which is used for x-ray diffraction studies with applied field normal to the scattering plane. A second independent closed-cycle cryostat is used for cooling the sample to near liquid helium temperatures. Pulsed magnetic fields ({approx}1 ms in total duration) are generated by discharging a configurable capacitor bank into the magnet coils. Time-resolved scattering data are collected using a combination of a fast single-photon counting detector, a multichannel scaler, and a high-resolution digital storage oscilloscope. The capabilities of this instrument are used to study a geometrically frustrated system revealing strong magnetostrictive effects in the spin-liquid state.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electron transport properties of antimony doped SnO{sub 2} single crystalline thin films grown by plasma-assisted molecular beam epitaxy

By antimony doping tin oxide, SnO{sub 2}:Sb (ATO), below 1.0% Sb concentration, controllable n-type doping was realized. Plasma-assisted molecular beam epitaxy has been used to grow high quality single crystalline epitaxial thin films of unintentionally doped (UID) and Sb-doped SnO{sub 2} on r-plane sapphire substrates. A UID thickness series showed an electron concentration of 7.9x10{sup 18} cm{sup -3} for a 26 nm film, which decreased to 2.7x10{sup 17} cm{sup -3} for a 1570 nm film, whereas the mobility increased from 15 to 103 cm{sup 2}/V s, respectively. This series illustrated the importance of a buffer layer to separate unintentional heterointerface effects from the effect of low Sb doping. Unambiguous bulk electron doping was established by keeping the Sb concentration constant but changing the Sb-doped layer thickness. A separate doping series correlated Sb concentration and bulk electron doping. Films containing between 9.8x10{sup 17} and 2.8x10{sup 20} Sb atoms/cm{sup 3} generated an electron concentration of 1.1x10{sup 18}-2.6x10{sup 20} cm{sup -3}. As the atomic Sb concentration increased, the mobility and resistivity decreased from 110 to 36 cm{sup 2}/V s and 5.1x10{sup -2} to 6.7x10{sup -4} OMEGA cm, respectively. The Sb concentration was determined by secondary ion mass spectrometry. X-ray diffraction and atomic force microscopy measurements showed no detrimental effects arising from the highest levels of Sb incorporation. Temperature dependent Hall measurements established a lower limit for the Sb electron activation energy of 13.2 meV and found that films with greater than 4.9x10{sup 19} electrons/cm{sup 3} were degenerately doped. Within experimental uncertainties, 100% donor efficiency was determined for Sb-doped SnO{sub 2} in the range studied.

36 MATERIALS SCIENCE↗

Giant tunneling magnetoresistance up to 330% at room temperature in sputter deposited Co{sub 2}FeAl/MgO/CoFe magnetic tunnel junctions

Magnetoresistance ratio up to 330% at room temperature (700% at 10 K) has been obtained in a spin-valve-type magnetic tunnel junction (MTJ) consisting of a full-Heusler alloy Co{sub 2}FeAl electrode and a MgO tunnel barrier fabricated on a single crystal MgO (001) substrate by sputtering method. The output voltage of the MTJ at one-half of the zero-bias value was found to be as high as 425 mV, which is the largest reported to date in MTJs using Heusler alloy electrodes. The present finding suggests that Co{sub 2}FeAl may be one of the most promising candidates for future spintronics devices applications.

36 MATERIALS SCIENCE↗

Thermodynamics and Ferroelectric Properties of KNbO3

The Landau-Ginsburg-Devonshire (LGD) phenomenological theory is employed to model and predict the ferroelectric phase transitions and properties of single-domain potassium niobate (KNbO3). Based on the LGD theory and the experimental data of KNbO3 single crystal, an eighth-order polynomial of free energy function is proposed. The fitted coefficients are validated by comparing to a set of experimental measured values including phase transition temperatures, spontaneous polarization, dielectric constants, and lattice constants. The effects of hydrostatic pressure and external electric field on phase transition temperatures and piezoelectric coefficients are investigated. The free energy function may be used a phase-field modeling to predict ferroelectric domain structures and properties of KNbO3 bulk crystals and films by phase-field approach.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the role of surface plasmon polaritons in the formation of laser-induced periodic surface structures upon irradiation of silicon by femtosecond-laser pulses

The formation of nearly wavelength-sized laser-induced periodic surface structures (LIPSSs) on single-crystalline silicon upon irradiation with single or multiple femtosecond-laser pulses (pulse duration tau=130 fs and central wavelength lambda=800 nm) in air is studied experimentally and theoretically. In our theoretical approach, we model the LIPSS formation by combining the generally accepted first-principles theory of Sipe and co-workers with a Drude model in order to account for transient intrapulse changes in the optical properties of the material due to the excitation of a dense electron-hole plasma. Our results are capable to explain quantitatively the spatial periods of the LIPSSs being somewhat smaller than the laser wavelength, their orientation perpendicular to the laser beam polarization, and their characteristic fluence dependence. Moreover, evidence is presented that surface plasmon polaritons play a dominant role during the initial stage of near-wavelength-sized periodic surface structures in femtosecond-laser irradiated silicon, and it is demonstrated that these LIPSSs can be formed in silicon upon irradiation by single femtosecond-laser pulses.

36 MATERIALS SCIENCE↗

Optical amplification in Er{sup 3+}-doped transparent Ba{sub 2}NaNb{sub 5}O{sub 15} single crystal at 850 nm

Positive optical gain around 5 cm{sup -1} (approx21 dB/cm) has been observed in Er{sup 3+}-doped Ba{sub 2}NaNb{sub 5}O{sub 15} single crystal using a pump and probe experimental setup. High power laser pulses at 532 nm have been used as the pump source in order to strongly populate the {sup 4}S{sub 3/2}({sup 2}H{sub 11/2}) levels of the Er{sup 3+} ions due to ground state absorption. Low signal beam cw laser radiation at 850 nm has been used as the probe beam to stimulate the emission associated with the {sup 4}S{sub 3/2}({sup 2}H{sub 11/2})->{sup 4}I{sub 13/2} electronic transition of the Er{sup 3+} ions. The process has been modelized as a four level system, and its population has been analyzed and simulated in order to study the gain dynamics. Optical amplification of the probe signal has been observed during the first 60 mus, which represents a good agreement between the measured lifetime of the {sup 4}S{sub 3/2}({sup 2}H{sub 11/2}) levels and the reported simulation.

36 MATERIALS SCIENCE↗

Epitaxial growth of fcc-Co{sub x}Ni{sub 100-x} thin films on MgO(110) single-crystal substrates

Co{sub x}Ni{sub 100-x} (x=100, 80, 20, 0 at. %) epitaxial thin films were prepared on MgO(110) single-crystal substrates heated at 300 deg. C by ultrahigh vacuum molecular beam epitaxy. The growth mechanism is discussed based on lattice strain and crystallographic defects. CoNi(110) single-crystal films with a fcc structure are obtained for all compositions. Co{sub x}Ni{sub 100-x} film growth follows the Volmer-Weber mode. X-ray diffraction analysis indicates that the out-of-plane and the in-plane lattice spacings of the Co{sub x}Ni{sub 100-x} films are in agreement within +-0.5% with the values of the respective bulk Co{sub x}Ni{sub 100-x} crystals, suggesting that the strain in the film is very small. High-resolution cross-sectional transmission microscopy shows that an atomically sharp boundary is formed between a Co(110){sub fcc} film and a MgO(110) substrate, where periodical misfit dislocations are preferentially introduced in the film at the Co/MgO interface. The presence of such periodical misfit dislocations relieves the strain caused by the lattice mismatch between the film and the substrate.

36 MATERIALS SCIENCE↗

Ultrathin film, high specific power InP solar cells on flexible plastic substrates

We demonstrate ultrathin-film, single-crystal InP Schottky-type solar cells mounted on flexible plastic substrates. The lightly p-doped InP cell is grown epitaxially on an InP substrate via gas source molecular beam epitaxy. The InP substrate is removed via selective chemical wet-etching after the epitaxial layers are cold-welded to a 25 {mu}m thick Kapton sheet, followed by the deposition of an indium tin oxide top contact that forms the Schottky barrier with InP. The power conversion efficiency under 1 sun is 10.2{+-}1.0%, and its specific power is 2.0{+-}0.2 kW/kg. The ultrathin-film solar cells can tolerate both tensile and compressive stress by bending over a <1 cm radius without damage.

36 MATERIALS SCIENCE↗