Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHASE VELOCITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Sommerfeld-enhanced J -factors for dwarf spheroidal galaxies

For models where dark matter annihilation is Sommerfeld-enhanced, the annihilation cross section increases at low relative velocities. Dwarf spheroidal galaxies (dSphs) have low characteristic dark matter particle velocities and are thus ideal candidates to study such models. Here, we model the dark matter phase space of dSphs as isotropic and spherically-symmetric, and determine the J-factors for several of the most important targets for indirect dark matter searches. For Navarro-Frenk-White density profiles, we quantify the scatter in the J-factor arising from the astrophysical uncertainty in the dark matter potential. We show that, in Sommerfeld-enhanced models, the ordering of the most promising dSphs may be different relative to the standard case of velocity-independent cross sections. This result can have important implications for derived upper limits on the annihilation cross section, or on possible signals, from dSphs

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Experimental investigation of turbulent wake flows in a helically wrapped rod bundle in presence of localized blockages

In nuclear sodium fast reactors, bundles of rods are tightly packed into a triangular lattice, enclosed in a hexagonal duct, and each pin is spirally wrapped with a thin wire. Flow blockages can potentially impact the local flow characteristics and heat transfer mechanisms in the bundle due to its small subchannel size. The effects of the blockage on the flow structures and heat transfer mechanisms are important aspects that require an accurate investigation. In this study, the flow-field characteristics in the vicinity of a blockage located in the exterior subchannel of rod bundles with helically wrapped wires were experimentally investigated. The velocity fields in the exterior subchannel were acquired by applying matched-index-of-refraction and time-resolved particle image velocimetry (TR-PIV) techniques for Reynolds numbers of Re 1 = 4000 and Re 2 = 17 000, i.e., equivalent to Rew 1 = 19 600 and Rew 2 = 83 200, respectively, based on the blockage width. The results from the TR-PIV measurements revealed an arch-shaped vortex with a large flow recirculation and a pair of counter-rotating vortices in the wake region downstream of the blockage, which is commonly observed in the wake flow of bluff bodies. The relative lateral distance and angle between the two vortices decreased when the Reynolds numbers increased. Profiles of maximum turbulence intensity along the shear layers illustrated the transition process including the growth, peak, and decay along the flow direction. From the spectral analysis of the turbulent velocities extracted at points along the shear layer, the Strouhal numbers ( St ) representing the vortex shedding frequency were found to be St = 0.25 and St = 0.56 for the left and right shear layers, respectively. Characteristics of shear layers generated by the blockage in the exterior subchannel were investigated via the two-point cross correlation of fluctuating velocities. The patiotemporal cross correlations of turbulent velocities, computed at points in the region where the left shear layer exhibited rolling effects and vortex breakdowns, were considerably wider and longer. The convection velocity U c was estimated to be ~0.82 U m to 0.93 U m . Proper orthogonal decomposition (POD) analysis was applied to the instantaneous velocity fields to extract the statistically dominant flow structures. It was found that POD modes 2–3 and 4–5 formed the pair modes when the corresponding POD temporal coefficients depicted sinusoidal shapes and exhibited nearly circular orbits in the phase space. Spectral analysis of the POD temporal coefficients confirmed the vortex shedding frequencies detected in the analysis of turbulent velocities.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Nonequilibrium phases and segregation for skyrmions on periodic pinning arrays

Using particle-based simulations, we examine the collective dynamics of skyrmions interacting with periodic pinning arrays, focusing on the impact of the Magnus force on the sliding phases. As a function of increasing pinning strength, we find a series of distinct dynamical phases, including an interstitial flow phase, a moving disordered state, a moving crystal, and a segregated cluster state. The transitions between these states produce signatures in the skyrmion lattice structure, the skyrmion Hall angle, the velocity fluctuation distributions, and the velocity-force curves. The moving clustered state is similar to the segregated state recently observed in continuum-based simulations with strong quenched disorder. The segregation arises from the drive dependence of the skyrmion Hall angle, and appears in the strong pinning limit when the skyrmions have nonuniform velocities, causing different portions of the sample to have different effective skyrmion Hall angles. As a result, we map the evolution of the dynamic phases as a function of the system density, the ratio of the Magnus force to the dissipative term, and the ratio of the number of skyrmions to the number of pinning sites.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A Study of Turbulence-Driven Inward Momentum Flux & Construction of a Difference Scheme for Fokker-Planck-Landau Operator

Momentum transport driven by microinstability is studied via analytic theories, gyrokinetic simulations, and experimental data analysis. A scenario for rotation profile evolution is constructed based on experimental observation that parallel flow initiates at edge region and penetrates into core region of tokamak [1]. In particular, turbulent diffusion and inward convective pinch are studied according to this scenario. For study of convective momentum pinch, toroidal ion temperature gradient mode near marginal stability is examined in kinetic limit. It is found from quasilinear estimation that the inward turbulent equipartition momentum pinch remains as the most robust part of pinch. In addition, it is found that ion temperature gradient driven momentum pinch is inward for typical parameters, while ion density gradient driven momentum pinch is outward. It is shown by theoretical formulas and experimental data analysis that momentum pinch velocity is sensitive to the electron to ion temperature ratio. For study of diffusive momentum transport, parallel shear flow instability is studied in fluid limit. Diffusion coefficient using mixing length estimate from nonlocal theory reveals that it has a strong dependence on the parallel flow shear and is mainly carried by fluctuations in short wavelength regime. Gyrokinetic simulation of collisionless parallel shear flow instability shows that the analytic prediction of diffusion coefficient is comparable to numerical values in the linear phase of the simulations. In the nonlinear phase, fluctuation energy gets transferred to the long wavelength regime. A two-dimensional, uniform velocity-grid based solver for the nonlinear Fokker-Planck-Landau (FPL) collision operator has been developed in the limit of strong magnetic field. The conservative and entropy increasing semidiscretized numerical scheme for the isotropic FPL equation by C. Buet et al. (2002) has been extended to 2D velocity space. A Picard fixed point method is used for semi-implicit time advance. One time evaluation of interpolation coefficients for probability distribution function is introduced so that numerical equilibrium is achieved with Maxwellian. However, positivity property is sacrificed at the saving of computational costs. In addition, a highly practical method is suggested to apply the velocity-grid based collision solver to particle-in-cell code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Long-lifetime ice particles in mixed-phase stratiform clouds: Quasi-steady and recycled growth

Lagrangian ice particle tracking is applied in both a 3-D time dependent velocity field produced by a Large Eddy Simulation cloud model and in a 2-D idealized field. It is found that more than 10% of ice particles have lifetimes longer than 1.5 hours, much longer than the large eddy turnover time or the time for a crystal to fall through the depth of a non-turbulent cloud. An analysis of trajectories in a 2-D idealized field shows that there are two types of long lifetime ice particles: quasi-steady and recycled growth. For quasi-steady growth, ice particles are suspended in the updraft velocity region for a long time. For recycled growth, ice particles are trapped in the large-eddy structures, and whether ice particles grow or evaporate depends on the ice relative humidity profile within the boundary layer. Some ice particles can grow after each cycle in the trapping region, until they are too large to be trapped, and thus have long lifetimes. Here, the relative contribution of the recycled ice particles to the cloud mean ice water content depends on both the dynamic and thermodynamic properties of the mixing layer. In particular, the total ice water content of a mixed phase cloud in a decoupled boundary layer can be much larger than that in a fully coupled boundary layer.

54 ENVIRONMENTAL SCIENCES↗

Single–Well Injection–Drift Test to Estimate Groundwater Velocity

A simple algebraic equation is presented here to estimate the magnitude of groundwater velocity based on data from a single-well injection-drift test thereby eliminating the time-consuming and costly extraction phase. A volume of tracer-amended water was injected by forced-gradient into a single well followed by monitoring of the conservative solute tracers under natural-gradient conditions as their upgradient portions drifted back through the well. The breakthrough curve data from the single well during the drift phase was analyzed to determine the mean travel times of the tracers. The estimated mean upgradient travel distance back through the single well and the mean travel times of the tracers were used in a simple algebraic equation to estimate groundwater velocity. The groundwater velocity based on the single-well injection-drift test was estimated to be approximately 0.64 ft per day. Two transects of observation wells were used to monitor the natural-gradient tracer transport downgradient of the injection well. The one-dimensional, or dual-well, transport of the tracer from the injection well to the nearest downgradient observation well indicated that the groundwater velocity was 0.55 ft per day. The two-dimensional, or multi-well, transport of the center of mass of the tracers indicated that the groundwater velocity was 0.60 ft per day; the dual- and multi-well results were in excellent agreement with those from the single-well and validated the simple algebraic equation. In conclusion, the new single-well method presented here is relatively simple, rapid, and does not require an extraction phase.

54 ENVIRONMENTAL SCIENCES↗

A MODEL ATMOSPHERE ANALYSIS OF ALPHA AURIGAE A

This work presents the first quantitative composite model atmosphere analysis of Capella, the brightest near-equal-mass spectroscopic binary and principal star of the constellation Auriga. Its high-resolution spectrum leads to a slightly metal-rich object at [Fe/H] = +0.05 {+-} 0.08 dex. In line with its young age and its kinematics, this consistently associates Capella with the Hyades moving group. The measured projected rotational velocities, vsin i{sub Aa} = 3.5 {+-} 0.8 km s{sup -1} and vsin i{sub Ab} = 35.4 {+-} 3.2 km s{sup -1}, both agree with rotational and orbital coplanarity and synchronous orbital rotation for the Aa component. At an orbital period P = 104 d the primary's bound rotation together with the almost zero orbital eccentricity are both key characteristics of this binary and clearly imply that the Aa component must have passed the tip of the giant branch. Whether in that phase Capella also became a mass transfer system remains inconclusive at present, though the high rotational velocity of the less evolved Hertzsprung gap secondary and the very diverse lithium abundances of both its components render this a plausible case.

79 ASTRONOMY AND ASTROPHYSICS↗

DIRECT OBSERVATIONS OF MAGNETIC RECONNECTION OUTFLOW AND CME TRIGGERING IN A SMALL ERUPTING SOLAR PROMINENCE

We examine a small prominence eruption that occurred on 2014 May 1 at 01:35 UT and was observed by the Interface Region Imaging Spectrometer (IRIS) and the Atmospheric Imaging Assembly (AIA) on the Solar Dynamics Observatory. Pre- and post-eruption images were taken by the X-ray Telescope (XRT) on Hinode. Pre-eruption, a dome-like structure exists above the prominence, as demarcated by coronal rain. As the eruption progresses, we find evidence for reconnection between the prominence magnetic field and the overlying field. Fast flows are seen in AIA and IRIS, indicating reconnection outflows. Plane-of-sky flows of 300 km s{sup −1} are observed in the AIA 171 A channel along a potentially reconnected field line. IRIS detects intermittent fast line of sight flows of 200 km s{sup −1} coincident with the AIA flows. Differential emission measure calculations show heating at the origin of the fast flows. Post-eruption XRT images show hot loops probably due to reconfiguration of magnetic fields during the eruption and subsequent heating of plasma in these loops. Although there is evidence for reconnection above the prominence during the eruption, high spatial resolution images from IRIS reveal potential reconnection sites below the prominence. A height–time analysis of the erupting prominence shows a slow initial rise with a velocity of 0.4 km s{sup −1} followed by a rapid acceleration with a final velocity of 250 km s{sup −1}. Brightenings in IRIS during the transition between these two phases indicate the eruption trigger for the fast part of the eruption is likely a tether-cutting mechanism rather than a break-out mechanism.

79 ASTRONOMY AND ASTROPHYSICS↗

Stability of Fe-bearing hydrous phases and element partitioning in the system MgO–Al 2 O 3 –Fe 2 O 3 –SiO 2 –H 2 O in Earth’s lowermost mantle

We performed high pressure–temperature ( P-T ) experiments on a model composition of hydrous subducted slabs in the MgO–Al 2 O 3 –Fe 2 O 3 –SiO 2 –H 2 O system using laser-heated diamond anvil cells. The phase assemblages were characterized combining in-situ synchrotron X-ray diffraction and ex-situ transmission electron microscope techniques. The hydrous δ-phase AlOOH–FeOOH–MgSiO 2 (OH) 2 –SiO 2 coexists with bridgmanite (Bdg), post-perovskite (pPv), or both in a broad P-T range of 104–126 GPa and 1750–2500 K. The hydrous pyrite-type FeOOHx phase was observed in-situ over a P-T range of 112–123 GPa and 1750–2300 K, coexisting with the pPv phase. Chemical analysis on recovered samples showed that considerable amount of Fe 2 O 2 (OH) 2 (8–13 mol%) and SiO 2 (9–13 mol%) in the δ-phase does not reduce its thermal stability compared to the Al-endmember, indicating that the Fe-bearing δ-phase can transport water to the lowermost mantle along the mantle geotherm. In this hydrous system, we observed that Al depletion in both the Bdg and pPv phases can significantly reduce the width of the Bdg to pPv transition in contrast to a wide two-phase coexistence region in a dry Al-rich system. Meanwhile, the Fe enrichment in the pPv phase relative to the coexisting Bdg phase lowers the transition pressure to the depth of the D" discontinuity. Accordingly, the depth and thickness of the Bdg to pPv transition in subducted basaltic crustal materials can explain the seismically detected D" discontinuity. Partial melting could be triggered by dehydration of the Fe-bearing hydrous phases due to a steep temperature gradient at the core mantle boundary (CMB), and therefore the ultralow-velocity zones (ULVZs) might be the regions where partial melting occurs at the lowermost mantle.

58 GEOSCIENCES↗

A consistent and conservative Phase-Field method for multiphase incompressible flows

In the present study, a consistent and conservative Phase-Field method, including both the model and scheme, is developed for multiphase flows with an arbitrary number of immiscible and incompressible fluid phases. The consistency of mass conservation and the consistency of mass and momentum transport are implemented to address the issue of physically coupling the Phase-Field equation, which locates different phases, to the hydrodynamics. These two consistency conditions, as illustrated, provide the “optimal” coupling because (i) the new momentum equation resulting from them is Galilean invariant and implies the kinetic energy conservation, regardless of the details of the Phase-Field equation, and (ii) failures of satisfying the second law of thermodynamics or the consistency of reduction of the multiphase flow model only result from the same failures of the Phase-Field equation but are not due to the new momentum equation. Physical interpretation of the consistency conditions and their formulations are first provided, and general formulations that are obtained from the consistency conditions and independent of the interpretation of the velocity are summarized. Then, the present consistent and conservative multiphase flow model is completed by selecting a reduction consistent Phase-Field equation. Several novel techniques are developed to inherit the physical properties of the multiphase flows after discretization, including the gradient-based phase selection procedure, the momentum conservative method for the surface force, and the general theorems to preserve the consistency conditions on the discrete level. Equipped with those novel techniques, a consistent and conservative scheme for the present multiphase flow model is developed and analyzed. The scheme satisfies the consistency conditions, conserves the mass and momentum, and assures the summation of the volume fractions to be unity, on the fully discrete level and for an arbitrary number of phases. All those properties are numerically validated. Finally, numerical applications demonstrate that the present model and scheme are robust and effective in studying complicated multiphase dynamics, especially for those with large-density ratios.

97 MATHEMATICS AND COMPUTING↗

Phase field-volumetric lattice Boltzmann model of ion uptake in porous nuclear waste form materials under continuous flow

The flow field within the mesopores of sorbent particles plays a crucial role in radionuclide diffusion and ion uptake kinetics, thus, impacting the overall performance of porous nuclear waste form materials. To fundamentally understand the influence of microstructures and material properties on the radionuclide absorption and retention processes requires a coupled multi-physics model that considers the advection and diffusion within the flow field, the reaction at liquid-solid interfaces, and finally, the solid-state diffusion within a complex nanoporous medium. Here, this study employs the volumetric lattice Boltzmann method (VLBM) to accurately and efficiently calculate the steady state velocity field inside the mesopores of sorbent particles. The obtained velocity field is then utilized to calculate the advection of ions in the steady flow. A phase field (PF) model of ion uptake is used to describe the reaction occurring at the solid-liquid interface and diffusion inside the porous medium. The integrated PF-VLBM model is verified in terms of the mass conservation and numerical efficiency and validated qualitatively with experimental observation data. Then, it is applied to study the influence of thermodynamic and kinetic properties, as well as flow field conditions on the ion uptake kinetics. The numerical results demonstrate that the ion uptake kinetics in porous particles has three distinct stages, which is in agreement with the observations in continuous flow experiments. In the first stage, the kinetics is predominantly controlled by the flow field and ion diffusivity in the liquid phase. The kinetics in the second stage is primarily governed by ion diffusivity in the solid phase. In the third stage the system reaches a dynamic equilibrium with a net zero uptake flux at the interface. It is also found that porous structures significantly affect the efficiency and capacity of ion uptake. The simulation results can help to understand the physics behind the observed ion uptake kinetics in experiments and to facilitate the development of constitutive equations that can account for heterogeneous microstructures in engineering performance codes.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The Binary Dwarf Carbon Star SDSS J125017.90+252427.6

Even though dwarf carbon (dC) stars are universally thought to be binaries in order to explain the presence of C 2 in their spectra while still near main-sequence luminosity, direct observational evidence for their binarity is remarkably scarce. In this work, we introduce the detection of a 2.92 day periodicity in both the photometry and radial velocity of SDSS J125017.90+252427.6, an r = 16.4 dC star. This is the first photometric binary dC, and only the second dC spectroscopic binary. The relative phase of the photometric period to the spectroscopic observations suggests that the photometric variations are a reflection effect due to heating from an unseen companion. The observed radial velocity amplitude of the dC component ( K = 98.8 ± 10.7 km s -1 ) is consistent with a white dwarf companion, presumably the evolved star that earlier donated the carbon to the dC, although substantial orbital evolution must have occurred. Large synoptic photometric surveys such as the Palomar Transient Factory, which was used for this work, may prove useful for identifying binaries among the shorter-period dC stars.

79 ASTRONOMY AND ASTROPHYSICS↗

Particle in cell simulations of Buneman instability of a current-driven plasma with q-nonextensive electron velocity distribution

The nonlinear evolution of low frequency Buneman instability in an unmagnetized current-driven plasma with q-nonextensive electron velocity distribution is investigated using particle in cell simulation. Simulation results show that the generation of electron phase space holes and the counter-streaming current induced in the plasma strongly depend on the q-parameter. It is found that by increasing the nonextensive parameter, the distribution of electron density becomes highly peaked. This density steepening or grating-like pattern occurs at the saturation time. In addition, a generalized dispersion relation is obtained using the kinetic theory. Analysis of the dispersion relation and the temporal evolution of the electric field energy density reveal that the growth rate of instability increases by increasing the q-parameter. Finally, the results of Maxwellian and q-nonextensive velocity distributions have been compared and discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Developing a Consistent Travel-Time Framework for Comparing Three-Dimensional Velocity Models for Seismic Location Accuracy

Abstract Location algorithms have historically relied on simple, one-dimensional (1D) velocity models for fast seismic event locations. 1D models are generally used as travel-time lookup tables, one for each seismic phase, with travel-times pre-calculated for event distance and depth. These travel-time lookup tables are extremely fast to use and this fast computational speed makes them the preferred type of velocity model for operational needs. Higher-dimensional (i.e., three-dimensional—3D) seismic velocity models are becoming readily available and provide more accurate event locations over 1D models. The computational requirements of these 3D models tend to make their operational use prohibitive. Additionally, comparing location accuracy for 3D seismic velocity models tends to be problematic, as each model is determined using different ray-tracing algorithms. Attempting to use a different algorithm than the one used to develop a model usually results in poor travel-time prediction. We demonstrate and test a framework to create first-P and first-S 3D travel-time correction surfaces using an open-source framework ( PCalc + GeoTess , https://www.sandia.gov/salsa3d/software/geotess ) that easily stores 3D travel-time and uncertainty data. This framework produces fast travel-time and uncertainty predictions and overcomes the ray-tracing algorithm hurdle because the lookup tables can be generated using the exact ray-tracing algorithm that is preferred for a model.

3D velocity models↗

Chandra X-ray spectroscopy of focused wind in the Cygnus X-1 system: II. The non-dip spectrum in the low/hard state – modulations with orbital phase

Accretion onto the black hole in the system HDE 226868/Cygnus X-1 is powered by the strong line-driven stellar wind of the O-type donor star. We study the X-ray properties of the stellar wind in the hard state of Cyg X-1, as determined using data from the Chandra High Energy Transmission Gratings. Large density and temperature inhomogeneities are present in the wind, with a fraction of the wind consisting of clumps of matter with higher density and lower temperature embedded in a photoionized gas. Absorption dips observed in the light curve are believed to be caused by these clumps. This work concentrates on the non-dip spectra as a function of orbital phase. The spectra show lines of H-like and He-like ions of S, Si, Na, Mg, Al, and highly ionized Fe (Fe xvii–Fe xxiv). We measure velocity shifts, column densities, and thermal broadening of the line series. The excellent quality of these five observations allows us to investigate the orbital phase-dependence of these parameters. We show that the absorber is located close to the black hole. Doppler shifted lines point at a complex wind structure in this region, while emission lines seen in some observations are from a denser medium than the absorber. Here, the observed line profiles are phase-dependent. Their shapes vary from pure, symmetric absorption at the superior conjunction to P Cygni profiles at the inferior conjunction of the black hole.

79 ASTRONOMY AND ASTROPHYSICS↗

Interface tracking simulations of bubbly flows in PWR relevant geometries

[en] Highlights: • Simulations were performed for turbulent bubbly flows in PWR subchannel geometry. • Liquid turbulence is fully resolved by direct numerical simulation approach. • Bubble behavior is captured using level-set interface tracking method. • Time-averaged single- and two-phase turbulent flow statistical quantities are obtained. - Abstract: The advances in high performance computing (HPC) have allowed direct numerical simulation (DNS) approach coupled with interface tracking methods (ITM) to perform high fidelity simulations of turbulent bubbly flows in various complex geometries. In this work, we have chosen the geometry of the pressurized water reactor (PWR) core subchannel to perform a set of interface tracking simulations (ITS) with fully resolved liquid turbulence. The presented research utilizes a massively parallel finite-element based code, PHASTA, for the subchannel geometry simulations of bubbly flow turbulence. The main objective for this research is to demonstrate the ITS capabilities in gaining new insight into bubble/turbulence interactions and assisting the development of improved closure laws for multiphase computational fluid dynamics (M-CFD). Both single- and two-phase turbulent flows were studied within a single PWR subchannel. The analysis of numerical results includes the mean gas and liquid velocity profiles, void fraction distribution and turbulent kinetic energy profiles. Two sets of flow rates and bubble sizes were used in the simulations. The chosen flow rates corresponded to the Reynolds numbers of 29,079 and 80,775 based on channel hydraulic diameter (D_h) and mean velocity. The finite element unstructured grids utilized for these simulations include 53.8 million and 1.11 billion elements, respectively. This has allowed to fully resolve all the turbulence scales and the deformable interfaces of individual bubbles. For the two-phase flow simulations, a 1% bubble volume fraction was used which resulted in 17 bubbles in the smaller case and 262 bubbles in the larger case. In the larger simulation case the size of the resolved bubbles is 0.65 mm in diameter, and the bulk mesh cell size is about 30 microns. Those large-scale simulations provide new level of details previously unavailable and were enabled by the excellent scaling performance of our two-phase flow solver and access to the state-of-the-art supercomputing resources. The presented simulations used up to 256 thousand processing threads on the IBM BG/Q supercomputer “Mira” (Argonne National Laboratory).

Nuclear Science & Technology↗

OBSERVATIONAL EVIDENCE OF ELECTRON-DRIVEN EVAPORATION IN TWO SOLAR FLARES

We have explored the relationship between hard X-ray (HXR) emissions and Doppler velocities caused by the chromospheric evaporation in two X1.6 class solar flares on 2014 September 10 and October 22, respectively. Both events display double ribbons and the Interface Region Imaging Spectrograph slit is fixed on one of their ribbons from the flare onset. The explosive evaporations are detected in these two flares. The coronal line of Fe xxi 1354.09 Å shows blueshifts, but the chromospheric line of C i 1354.29 Å shows redshifts during the impulsive phase. The chromospheric evaporation tends to appear at the front of the flare ribbon. Both Fe xxi and C i display their Doppler velocities with an “increase-peak-decrease” pattern that is well related to the “rising-maximum-decay” phase of HXR emissions. Such anti-correlation between HXR emissions and Fe xxi Doppler shifts and correlation with C i Doppler shifts indicate the electron-driven evaporation in these two flares.

79 ASTRONOMY AND ASTROPHYSICS↗

High-resolution time-resolved experiments on mixing and entrainment of buoyant jets in stratified environments

Fluid jets interacting with a stratified layer play an important role in the safety of several reactor designs. In the containment of nuclear power plants, fluid jets dominate the transport and mixing of gaseous species and consequent hydrogen distribution in case of a severe accident. The mixing phenomena in the containment are driven by buoyant high-momentum injections (jets) and low momentum injection plumes. Mixing near the postulated break is initially dominated by high flow velocities. Plumes with moderate flow velocities are instead relevant in the break compartment during the long-term pressurization phase, or in any of the apertures between two connected compartments if the mass flows are sufficiently high and the density differences between efflux and ambient are sufficiently low. Phenomena of interest include free plumes (as produced by the efflux from the break compartment in a larger room or directly from a break flow), wall plumes (such those produced by low mass flows through inter-compartment apertures), and propagating stratification fronts in the ambient (for any stably stratified conditions). These phenomena have been highly ranked about nuclear reactor design, especially regarding of safety protocols. During a Pressurized Thermal Shock (PTS) scenario, the interaction between the cold ECCS injection plume and the stratified fluid present in the cold (or hot) leg is important in order to determine the temperature at the time-dependent temperature at the inlet of the reactor pressure vessel (RPV) and the potential to cause a thermal shock on the RPV wall. In sodium-cooled fast reactors (SFRs), core channels are typically hydro-dynamically isolated so that there exists a considerable temperature variation at the exit of adjacent fuel assemblies. All the above phenomena are characterized by the interaction of buoyant jets with the stratified flow. In stratified layers baroclinic forces create significant redistribution of turbulent kinetic energy and scales, which leads to anisotropy. This important physical phenomenon is highly three dimensional and is challenging to capture even with high-fidelity CFD simulations, due in part to lack of sufficiently resolved validation data. Furthermore, the experimental data available in the open literature do not feature the level of fidelity needed for an extensive validation of turbulence models in lower order CFD. To shed new lights into the crucial phenomena object of the present research project, it was proposed to conduct coordinated experiments and simulations at the University of Michigan and the George Washington University. The project has resulted in an experimental database of high-resolution time-resolved measurements of jets in uniform and stratified environments. The novel experimental data will be used to validate computational fluid dynamic (CFD) codes, including both Large Eddy Simulations (LES) and unsteady Reynolds-averaged Navier-Stokes equations (URANS) methodologies. In the Experimental and Multiphase flow (ECMF) laboratory at Univerisity of Michigan, we built two experimental facilities to investigate also the effect of scaling. The first facility, DESTROJER (DEnsity Stratified Turbulent ROund free Jet ExpeRiment), featuring a contoured jet nozzle with a diameter of D=12.7mm and a 1m×1m×1m cubic tank, which is made of acrylic glass for optical access. The ratio between the tank width and the nozzle diameter is equal to 78, which ensures that there is no direct interaction between the jet and the side walls. A second, modular experimental facility, features three different tank sizes of size 10×10×30, 20×20×30, 30×30×30 cm3 respectively (all tanks have the same height of 30 cm), and a jet diameter of 2mm. For the modular facility, tank-to-nozzle ratio of 50, 100, and 150 are obtained respectively. Experiments with different-density jet impactions and sharp interface with a density difference of 3.16% In the Laboratory at George Washington University, complementary experiments have been carried out at a facility featuring the same dimensions as DESTROYER. Experiments with different jet diameters have been carried out as well. High-resolution time-resolved measurements have been performed at all facilities using high-speed particle image velocimetry (PIV) and planar laser-induced fluorescence (PLIF). In this way, simultaneous measurements of velocity and density fields have been carried out. At the University of Michigan, wire-mesh sensors have been designed and built to gather high-resolution, time-dependent data of the stratified front in the tank. These measurements are important to provide accurate initial conditions for the CFD simulations. An important outcome of the project has been the development of novel techniques to achieve refractive index matching (RIM) of acqueous solutions with high density differences. RIM is crucial if optical techniques such as PIV are used to measure velocity fields. Previous to this project, experiments up to 3% density difference had been reported in the literature. With the methodology developed in this project, we have been able to push the envelop to density differences up to 9%. The experiments have been used to validate Reynolds Averaged Navier-Stokes (RANS) turbulence models and Large Eddy Simulations (LES) models. Both NEK5000 and the commercial CFD code STAR-CCM+ have been used. The experimental data will be made available to the community through the NE-KAMS databasehave been successfully conducted in the scaled facility.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗