Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase 2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

New Opportunity for Carbon-Supported Ni-based Electrocatalysts: Gas-Phase CO 2 Methanation

The cost-effectiveness and excellent performance of conductive-carbon-supported Ni-based electrocatalysts make them attractive materials for hydrogen oxidation and evolution reactions. However, they were previously unused in gas-phase hydrogenation reactions. In this work, we have expanded the applicability of commercially available advanced Ni/C, NiMo/C and NiRe/C materials from electrocatalysis to heterogeneous catalysis of CO 2 methanation. Our catalytic testing efforts indicate that the monometallic Ni/C material demonstrates the best CO 2 methanation properties, achieving an excellent CO 2 conversion of 83 % at 400 °C with nearly complete selectivity to CH 4 of 99.7 %, plus exhibiting intact performance during 90 h of time-on-stream testing. Such catalytic properties are among the highest reported to date among carbon-supported Ni-based methanation catalysts. Finally, excellent performance of Ni/C stems from the good dispersion of the Ni nanoparticles over N-containing carbon support material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enabling propulsion materials for high-speed civil transport engines

NASA Headquarters and LeRC have advocated an Enabling Propulsion Materials Program (EPM) to begin in FY-92. The High Speed Research Phase 1 program which began in FY-90 has focused on the environmental acceptability of a High Speed Civil Transport (HSCT). Studies by industry, including Boeing, McDonnell Douglas, GE Aircraft Engines, and Pratt & Whitney Aircraft, and in-house studies by NASA concluded that NO(x) emissions and airport noise reduction can only be economically achieved by revolutionary advancements in materials technologies. This is especially true of materials for the propulsion system where the combustor is the key to maintaining low emissions, and the exhaust nozzle is the key to reducing airport noise to an acceptable level. Both of these components will rely on high temperature composite materials that can withstand the conditions imposed by commercial aircraft operations. The proposed EPM program will operate in conjunction with the HSR Phase 1 Program and the planned HSR Phase 2 program slated to start in FY-93. Components and subcomponents developed from advanced materials will be evaluated in the HSR Phase 2 Program.

Stephens, Joseph R.↗

The atmospheric effects of stratospheric aircraft: A fourth program report

This document presents the fourth report from the Atmospheric Effects of Stratospheric Aircraft (AESA) component of NASA's High-Speed Research Program (HSRP). Market and technology considerations continue to provide an impetus for high-speed civil transport research. A recent AESA interim assessment report and a review of that report have shown that considerable uncertainty still exists about the possible impact of aircraft on the atmosphere. The AESA has been designed to develop the body of scientific knowledge necessary for the evaluation of the impact of stratospheric aircraft on the atmosphere. The first Program report presented the basic objectives and plans for AESA. This fourth report comes after the interim assessment and sets forth directions for the 1995 assessment at the end of AESA Phase 1. It also sets forth the goals and directions for AESA Phase 2, as reported at the 1994 Atmospheric Effects of Aviation Project (AEAP) annual meeting held in June. The focus of the Phase 2 effort is to obtain the best possible closure on the outstanding problems identified in the interim assessment and NASA/NRC review. Topics discussed in this report include how high-speed civil transports (HSCT) might affect stratospheric ozone, emissions scenarios and databases to assess potential atmospheric effects from HSCT's, calculated results from 2-D zonal mean models using emissions data, engine trace constituent measurements.

Stolarski, Richard S.↗

A study of space-rated connectors using a robot end-effector

The main research activities have been directed toward the study of the Robot Operated Materials Processing System (ROMPS), developed at GSFC under a flight project to investigate commercially promising in-space material processes and to design reflyable robot automated systems to be used in the above processes for low-cost operations. The research activities can be divided into two phases. Phase 1 dealt with testing of ROMPS robot mechanical interfaces and compliant device using a Stewart Platform testbed and Phase 2 with computer simulation study of the ROMPS robot control system. This report provides a summary of the results obtained in Phase 1 and Phase 2.

Nguyen, Charles C.↗

System technology analysis of aeroassisted orbital transfer vehicles: Moderate lift/drag (0.75-1.5). Volume 3: Cost estimates and work breakdown structure/dictionary, phase 1 and 2

Technology payoffs of representative ground based (Phase 1) and space based (Phase 2) mid lift/drag ratio aeroassisted orbit transfer vehicles (AOTV) were assessed and prioritized. A narrative summary of the cost estimates and work breakdown structure/dictionary for both study phases is presented. Costs were estimated using the Grumman Space Programs Algorithm for Cost Estimating (SPACE) computer program and results are given for four AOTV configurations. The work breakdown structure follows the standard of the joint government/industry Space Systems Cost Analysis Group (SSCAG). A table is provided which shows cost estimates for each work breakdown structure element.

Source record↗

EGRET observations of the BL Lacertae objects 0716+714 and 0521-365

During the Compton Observatory's viewing programs Phase 1 (1991 April to 1992 November, also known as the All-Sky Survey) and Phase 2 (1992 November to 1993 September), the BL Lac object 0716+714 was in the field of view of the EGRET telescope a total of six times, three times in Phase 1 and three more times in Phase 2, while the BL Lac object 0521-365 was in the field of view of EGRET only once in Phase 1. The source 0716+714 was detected in high-energy gamma rays by EGRET at a flux level of (2.0 +/- 0.4) x 10(exp -7) photons/sq cm/s for E greater than 100 MeV with a 6 sigma significance when it was first observed by EGRET in 1992 January 10 to 23. The corresponding spectral slope of the photon number distribution is determined to be -2.04 +/- 0.33. The gamma-ray flux of 0716+714 showed considerable time variability in subsequent EGRET observations. But the spectral slope stayed about the same within the statistical uncertainties of the EGRET data. The average spectral slope of the four viewing periods during which the photon flux of 0716+714 stayed above the EGRET detection threshold is found to be -1.85 +/- 0.20 from the combined data. The source 0521+365 was detected by EGRET in 1992 May 14 to June 4 at a flux level of (1.8 +/- 0.5) x 10(exp -7) photons/sq cm/s for E greater than 100 MeV with a 4 sigma significance. The corresponding spectral slope of the photon number distribution is found to be 2.16 +/- 0.36. Details of the observations of these two BL Lac objects with the EGRET telescope are presented.

Lin, Y. C.↗

Divacancies and the hydrogenation of Mg-Ti films with short range chemical order

We obtained evidence for the partial chemical segregation of as-deposited and hydrogenated Mg{sub 1-y}Ti{sub y} films (0<=y<=0.30) into nanoscale Ti and Mg domains using positron Doppler-broadening. We exclusively monitor the hydrogenation of Mg domains, owing to the large difference in positron affinity for Mg and Ti. The electron momentum distribution broadens significantly upon transformation to the MgH{sub 2} phase over the whole compositional range. This reveals the similarity of the metal-insulator transition for rutile and fluorite MgH{sub 2}. Positron lifetime studies show the presence of divacancies in the as-deposited and hydrogenated Mg-Ti metal films. In conjunction with the relatively large local lattice relaxations we deduce to be present in fluorite MgH{sub 2}, these may be responsible for the fast hydrogen sorption kinetics in this MgH{sub 2} phase.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Comparison of Waste Feed Delivery Small Scale Mixing Demonstration Simulant to Hanford Waste

The Hanford double-shell tank (DST) system provides the staging location for waste feed delivery to the Hanford Tank Waste Treatment and Immobilization Plant (WTP). Hall (2008) includes WTP acceptance criteria that describe physical and chemical characteristics of the waste that must be certified as acceptable before the waste is transferred from the DSTs to the WTP. One of the more challenging requirements relates to the sampling and characterization of the undissolved solids (UDS) in a waste feed DST. The objectives of Washington River Protection Solutions' (WRPS) Small Scale Mixing Demonstration (SSMD) project are to understand and demonstrate the DST sampling and batch transfer performance at multiple scales using slurry simulants comprised of UDS particles and liquid (Townson 2009). The SSMD project utilizes geometrically scaled DST feed tanks to generate mixing, sampling, and transfer test data. In Phase 2 of the testing, RPP-49740, the 5-part simulant defined in RPP-48358 was used as the waste slurry simulant. The Phase 2 test data are being used to estimate the expected performance of the prototypic systems in the full-scale DSTs. As such, understanding of the how the small-scale systems as well as the simulant relate to the full-scale DSTs and actual waste is required. The focus of this report is comparison of the size and density of the 5-part SSMD simulant to that of the Hanford waste. This is accomplished by computing metrics for particle mobilization, suspension, settling, transfer line intake, and pipeline transfer from the characterization of the 5-part SSMD simulant and characterizations of the Hanford waste. In addition, the effects of the suspending fluid characteristics on the test results are considered, and a computational fluid dynamics tool useful to quantify uncertainties from simulant selections is discussed.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Evaluation of Structural Lattices for a Davis Gun Earth Penetrator Impact Experiment

The advanced materials team investigated the use of additively manufactured metallic lattice structures for mitigating impact response in a Davis gun earth penetrator impact experiment. High-fidelity finite element models were developed and validated with quasistatic experiments. These models were then used to simulate the response of such lattices when subjected to the acceleration loads expected in the Davis gun experiment. Results reveal how the impact mitigation performance of lattices can change drastically at a certain relative density. Based on these observations, an experiment deck was designed to probe the response of lattices with different relative densities during the Davis gun phase 2 shots. The expected performance of these lattices is predicted before testing based on simulation results. The results of the Davis gun phase 2 shots are expected to provide data which will be used to assess the predictive capability of the finite element simulations in such a complex impact environment.

36 MATERIALS SCIENCE↗

Chemical bond and phase stability of Ga-doped Sm2Fe17Cx magnet

Sm2Fe17C3 phase (2:17) is metastable and exhibits excellent intrinsic hard magnetic properties. Doping elements such as Ga facilitate the formation of a single-phase 2:17 structure in arc-melted Sm2Fe17Cx alloys, which opens a promising route for fabricating fully dense bulk Sm2Fe17Cx magnets via high-temperature techniques such as melting and sintering. First-principles electronic structure calculation indicates that Ga prefers to partially replace Fe at the 9d and 18h crystallographic sites in Sm2Fe17C3 and Sm2Fe17, respectively. This difference in site preference is attributed to the distinct chemical environments surrounding the Fe atoms in the two compounds. Ga substitution favors the Sm–Ga bonding formation while avoiding Ga–C interactions. Doped Ga atoms result in more negative formation energy in Sm2(Fe, Ga)17C3, indicating improved structural stability. Crystal Orbital Hamilton Population analysis reveals that carbon insertion weakens the bonding of Sm-Fe (18h) and Sm-Fe (18f) in Sm2Fe17C3. Ga doping facilitates electron redistribution across chemical bonds, thereby reinforcing Fe(18h)–Sm and Fe(18f)–Sm interactions and stabilizing the carbon-centered octahedral local structure. This synergistic effect contributes significantly to the observed enhancement in phase stability of Sm2(Fe, Ga)17Cx. These findings suggest that chemical bond engineering through the selective doping of Ga can enhance phase stability and facilitate the synthesis of Sm2Fe17C3, providing a viable strategy for developing advanced magnets.

Liu, Xubo [Critical Materials Innovation Hub, Divi↗

Phase transitions and magnetocaloric and transport properties in off-stoichiometric GdNi{sub 2}Mn{sub x}

The structural, magnetic, magnetocaloric, transport, and magnetoresistance properties of the rare-earth intermetallic compounds GdNi{sub 2}Mn{sub x} (0.5 ≤ x ≤ 1.5) have been studied. The compounds with x = 0.5 and 0.6 crystallize in the cubic MgCu{sub 2} type phase, whereas samples with x ≥ 0.8 form a mixed MgCu{sub 2} and rhombohedral PuNi{sub 3} phase. A second order magnetic phase transition from a ferromagnetic to paramagnetic state was observed near the Curie temperature (T{sub C}). The GdNi{sub 2}Mn{sub x} (0.5 ≤ x ≤ 1.5) compounds order in a ferrimagnetic structure in the ground state. The largest observed values of magnetic entropy changes (at T{sub C} for ΔH = 5T) were 3.9, 3.5, and 3.1 J/kg K for x = 0.5, 0.6, and 0.8, respectively. The respective relative values of the cooling power were 395, 483, and 220 J/kg. These values are greater than some well-known prototype magnetocaloric materials such as Gd (400 J/kg) and Gd{sub 5}Si{sub 2}Ge{sub 2} (240 J/kg). Analysis of the resistivity data showed a T{sup 2} dependence at low temperatures, suggesting strong electron-phonon interactions, whereas at higher temperatures s-d scattering was dominated by the electron-phonon contribution, resulting in a slow increase in resistivity. Magnetoresistance values of ∼−1.1% were found for x = 0.5 near T{sub C}, and −7% for x = 1.5 near T = 80 K.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

How Collective Phenomena Impact CO 2 Reactivity and Speciation in Different Media

CO 2 has attracted considerable attention in the recent years due to its role in the greenhouse effect and environmental management. While its reaction with water has been studied extensively, the same cannot be said for reactivity in supercritical CO 2 phase, where the conjugate acid/base equilibria proceed through different mechanisms and activation barriers. Furthermore, in spite of the apparent simplicity of the CO 2 + H 2 O reaction, the collective effect of different environments has drastic influence on the free energy profile. Enhanced sampling techniques and well-tailored collective variables provide a detailed picture of the enthalpic and entropic drivers underscoring the differences in the formation mechanism of carbonic acid in the gas, aqueous and supercritical CO 2 phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PF-4 Seismic Performance Reassessment Project (P-SPRaP), Interim Risk Methodology and Deliverables [Slides]

Background: Interim Risk was added to P-SPRaP (SPR Phase 2) to produce intermediate results which build confidence, exercise methodology, develop early insights, and (most importantly) mitigate LANL pit production program risk. Status: SPR Phase 2 is actively underway, has P-SPRaP project team priority focus, and is targeting completion in FY21 (September 2021). Deliverable: Presentation of interim risk results (loss of confinement for screened in failure modes), list of potential criticisms of Interim Risk approach / methodology that intervenors could raise, cost and schedule for completion of Final Risk.

58 GEOSCIENCES↗

Phase 1 Free Air CO2 Enrichment Model-Data Synthesis (FACE-MDS): Meteorological Data

These datasets comprise the meteorological, CO2 and N deposition data used to run models for the Duke and Oak Ridge FACE experiments. Phase 1 datasets are reproduced here for posterity and reproducibility although these meteorological datasets are superseded by the Phase 2 datasets. If you would like to use the meteorological datasets to run your own model or for any other purpose please use the Phase 2 datasets.

54 ENVIRONMENTAL SCIENCES↗

PSTN-053: Survey Cadence Optimization Committee's Phase 1 Recommendations

This document is authored by the Survey Cadence Optimization Committee (SCOC), guided by the community input, and it will serve as a roadmap for the concluding round of survey cadence simulations. These simulations, to be delivered during early calendar year 2022, will inform the phase 2 survey strategy recommendation which will define the baseline strategy for starting the Rubin Observatory's Legacy Survey of Space and Time (LSST). The phase 2 SCOC recommendation will be delivered to the Rubin Observatory Operations Director before the end of calendar year 2022.

79 ASTRONOMY AND ASTROPHYSICS↗

Effects of Undercooling and Cooling Rate on Peritectic Phase Crystallization Within Ni-Zr Alloy Melt

The liquid Ni-16.75 at. pct Zr peritectic alloy was substantially undercooled and containerlessly solidified by an electromagnetic levitator and a drop tube. The dependence of the peritectic solidification mode on undercooling was established based on the results of the solidified microstructures, crystal growth velocity, as well as X-ray diffraction patterns. Below a critical undercooling of 124 K, the primary Ni{sub 7}Zr{sub 2} phase preferentially nucleates and grows from the undercooled liquid, which is followed by a peritectic reaction of Ni{sub 7}Zr{sub 2}+L → Ni{sub 5}Zr. The corresponding microstructure is composed of the Ni{sub 7}Zr{sub 2} dendrites, peritectic Ni{sub 5}Zr phase, and inter-dendritic eutectic. Nevertheless, once the liquid undercooling exceeds the critical undercooling, the peritectic Ni{sub 5}Zr phase directly precipitates from this undercooled liquid. However, a negligible amount of residual Ni{sub 7}Zr{sub 2} phase still appears in the microstructure, indicating that nucleation and growth of the Ni{sub 7}Zr{sub 2} phase are not completely suppressed. The micromechanical property of the peritectic Ni{sub 5}Zr phase in terms of the Vickers microhardness is enhanced, which is ascribed to the transition of the peritectic solidification mode. To suppress the formation of the primary phase completely, this alloy was also containerlessly solidified in free fall experiments. Typical peritectic solidified microstructure forms in large droplets, while only the peritectic Ni{sub 5}Zr phase appears in smaller droplets, which gives an indication that the peritectic Ni{sub 5}Zr phase directly precipitates from the undercooled liquid by completely suppressing the growth of the primary Ni{sub 7}Zr{sub 2} phase and the peritectic reaction due to the combined effects of the large undercooling and high cooling rate.

36 MATERIALS SCIENCE↗

Low-Latency Ultra-High Capacity Holographic Data Storage Archive Library

Akonia has successfully completed all of its milestones and tasks for Phase 1. The results of these tasks met or exceeded our expectations and we are highly encouraged that every milestone in Phase 2 will be achievable moving forward. One of the highest risk tasks of Phase 1, achieving 1 Tbit/in2 bit densities, was accomplished by August and exceeded our Phase 1 goal by 35%. We achieved world record bit densities of 1.35Terabit/in2 and set our expectations of achieving our goal of 2 Terabits/in2 in Phase 2 quite high with a strong potential for exceeding this bit density as well. Additionally, Phase 1 allowed us to develop some very promising design concepts that would allow holographic storage to be retro-fit into existing LTO library systems with minimum impact on the library designs. These CAD designs are outlined in Section 1 including a new concept of a holographic media card (HMC) that can be stacked in a group of 5 and placed in a magazine that is exactly size compatible with an LTO tape, but will be able to hold at least 10 Terabytes of uncompressed data compared to todays LTO6 format that holds 2.5 Terabytes.

Anderson, Ken↗

Bending effects and optical properties of WSe 2 nanoribbons of topological phase

A WSe 2 monolayer of 1T' phase is a large band gap quantum spin Hall insulator, supporting dissipationless charge and spin transports through the topologically protected edge states. Here, in this work, we explore the nanoribbon forms of 1T' phase WSe 2 by first-principles density functional calculations and the many-body perturbation GW and Bethe-Salpeter equation method. We found that the 1T' WSe 2 nanoribbon can show topological edge states with a ribbon width of ~4-6 nm. Those edge bands show crossing through the Fermi level an odd number of times, with one kind of spin-polarization connecting the valence band continuum and conduction band continuum. The topological features of the edge bands hold even under small and medium bending in the nanoribbon, while large bending induces large band splitting, resulting in a topological switch-off in the edge bands. The semiconducting 1T' WSe2 nanoribbon shows a large tunability with bending in optical absorption spectra and exciton states. The lowest-energy exciton is changed from optically dark in the flat nanoribbon to bright in the bent nanoribbons. These properties in the 1T' WSe 2 nanoribbons suggest potential applications in controllable quantum electronics and exciton-based quantum information processes.

36 MATERIALS SCIENCE↗